Probing the p-type Chemiresistive Response of NiFe2 O4 Nanoparticles for Potential Utilization as Ethanol Sensor

Detection of gas molecules and volatile organic compounds (VOCs) using efficient, low cost sensors has fetched significant attention in environmental monitoring, safety measures and medical diagnosis. In the present work, nickel ferrite (NFO) nanoparticles are explored as p-type semiconducting metal oxide (SMO) sensor for detection of five different organic vapors namely methanol, ethanol, n-propanol, iso-propanol and acetone which often cause severe damage to human body under prolonged exposure. The sensing studies in presence of the aforementioned five vapors are carried out by varying the sensor operating temperature (225-300 °C) and vapor concentrations (10-1000 ppm). Developed NFO sensor demonstrated best performance in terms of sensing (~10 ppm), response time (<10 s), excellent repeatability and selectivity towards ethanol among all other considered gas species. The repeatability of the sensor response is verified and the underlying reasons for the variation in the response of NFO sensor due to the change of operating temperature, analyte type and concentrations has been discussed. The synthesis of NFO through auto combustion method and study on their formation behaviour, oxygen vacancy evolution, band gap calculation, crystalline nature as well as microstructural features provides here the comprehensive information about the potential application of NFO nanoparticles as gas sensor.

Synthesis and Characterization of CuO Nanodisks for High-Sensitive and Selective Ethanol Gas Sensor Applications

Herein, the fabrication and characterization of highly sensitive and selective ethanol gas sensor based on CuO nanodisks is reported. The CuO nanodisks were synthesized by facile hydrothermal process and detailed characterization revealed the well-crystallinity, high-purity and high density growth of the prepared material. To fabricate the ethanol gas sensor, the prepared nanodisks were coated on alumina substrate. The fabricated sensor exhibited high-sensitivity and the recorded gas response (resistance-ratio), response time (τ res) and recovery time (τ recov) were 6.2, 119 and 35 s, respectively for 100 ppm of C₂H₅OH at 300 °C. Further, the fabricated sensor shows high selectivity towards ethanol gas compared to H₂ and CO gases.

Development of QCM Trimethylamine Sensor Based on Water Soluble Polyaniline

A rapid, sensitive, low-cost device to detect trimethylamine was presented in this paper. The preparation of water soluble polyaniline was firstly studied. Then the polyaniline was characterized via Fourier transform infrared spectroscopy (FTIR), UV-visible spectroscopy and scanning electron microscopy (SEM). Based on the water soluble polyaniline film, a quartz crystal microbalance (QCM) sensor for trimethylamine detection was fabricated and its characteristics were examined. The sensor consisted of one quartz crystal oscillator coated with the polyaniline film for sensing and the other one for reference. Pretreated with trimethylamine, the QCM sensor had an excellent linear sensitivity to trimethylamine. Easily recovered by N2 purgation, the response of the sensor exhibited a good repeatability. Responses of the sensor to trimethylamine, ethanol and ethyl acetate were compared, and the results showed that the response was related to the polarity of the analyte vapor. Experimental result also showed that the sensitivity of the sensor was relatively stable within one month. The simple and feasible method to prepare and coat the polyaniline sensing film makes it promising for mass production.