Combination of pH-shifting, ultrasound, and heat treatments to enhance solubility and emulsifying stability of rice protein isolate

Rice protein isolates (RPI) are promising plant-protein sources but present low solubility and poor surface activity in neutral conditions. Improving these characteristics is a crucial challenge to capitalize on them. This is the first work performing pH-shifting, ultrasound, and heat treatments on a commercial RPI. The combined approaches increased the protein solubility (from ∼2.7% to ∼91.8%) and surface hydrophobicity (up to ∼283%) and induced the formation of less compact and more dispersed protein aggregates. The pH-shifting induced the unfolding of protein molecules and aggregates making them available for modification by both ultrasound and heating, which are supposed to induce further protein unfolding, exposure of buried hydrophobic amino acid, and protein hydrolysis. Also, the combined approaches generated modified RPI able to form oil-in-water emulsions with reduced particle size and enhanced stability than the untreated RPI. Therefore, this work presents an effective combined approach to enhance the techno-functional properties of rice proteins.

Identification of treated Baltic amber by FTIR and FT-Raman - A feasibility study

Heat-treated succinite modified under air, oxygen or inert gas atmosphere to improve its colour and clarity, was studied with Fourier-Transform Infrared and Raman spectroscopy, and referenced to variously altered untreated samples. For treated amber, the macroscopic observations revealed diagnostic features such as (1) the presence of discoidal " sun sparkles" inside the crumbs; (2) unusual colours (e.g. dark red) for transparent specimens; (3) mottled colour patches in "beeswax" and "dragon's blood" amber; (4) luminescence quenching; and (5) significant reduction of pine-tree resinous smell. On FTIR spectra the heat treatment of succinite is mainly marked by: (1) the intensity decrease of 2932 cm^-1 band (>CH₂ and -CH₃), followed by the intensity increase of line at 1732 cm^-1; (2) the shifts of the band from ν(C = O) towards lower wavenumbers (from 1735 cm^-1 to 1714 cm^-1); (3) the decrease of intensity of the band at 888 cm^-1 ((=CH₂ or -CH = CH-); (4) some slight distortion of "Baltic shoulder" in the region 1100-1300 cm^-1. The Principal Component Analysis applied to FTIR spectra enabled to distinguish not only untreated amber from treated one, but also recognize the modifications made under oxygen conditions from the ones in an inert gas. On RS spectra of the treated Baltic amber, the heat modifications are indicated by: (1) slight value increase of the relative intensity ratio I_1650/1445 compared to untreated succinite; (2) the shift of bands near 1650 (C = C) and 1445 cm^-1 (CH₂, CH₃) towards higher wavenumbers.

Precise control of heat-treatment conditions to improve the catalytic performance of V2O5/TiO2 for H2S removal

The purpose of this study is to investigate the influences of atmospheric gas and temperature while preparing V₂O₅/TiO₂ catalysts to find a suitable heat-treatment method to improve catalytic performance during the process of H₂S removal. The catalysts prepared by wet-impregnation were heat-treated at different temperatures (400 or 600 ℃) under various atmospheres (Air, N₂, or H₂). The catalytic tests demonstrated that the catalyst heat-treated at 400 ℃ under N₂ atmosphere (N-400) possessed excellent catalytic activities regarding H₂S conversion (96.4%) and sulfur yield (89.1%). The characterization results revealed that the mild reducing condition employed for N-400 led to the formation of partially reduced V₂O₅ crystals and a strong V-Ti interaction owing to the anatase TiO₂ phase, resulting in the high oxygen vacancies on the catalyst surface. However, severe reducing conditions (H₂ or N₂ with 600 ℃) or the higher temperature (600 ℃) induced highly reduced V₂O_5-x or rutile TiO₂ related to a weak V-Ti interaction, respectively, which facilitated lower oxygen vacancies. This study is the first to demonstrate the significance of a precisely controlled heat-treatment to enhance catalytic performance for H₂S removal.

Multiple diagnostic tests demonstrate an increased risk of canine heartworm disease in northern Queensland, Australia

Background

Canine heartworm (Dirofilaria immitis) is a life-threatening infection of dogs with a global distribution. Information on the prevalence of D. immitis and associated risk factors for canine heartworm antigen positivity—and thus disease—in Australia is scarce or outdated. The current reference method for D. immitis diagnosis in dogs is via the detection of heartworm antigen in blood using commercially available microwell-based enzyme-linked immunosorbent assays (ELISAs). Heat treatment of canine plasma prior to testing has been suggested to increase test sensitivity. The aim of the current study was to estimate the prevalence of D. immitis in dogs confined to shelters in Queensland, Australia. The impact of heat treatment on antigen test results was also assessed.

Methods

Blood samples (n = 166) were collected directly from dogs in seven shelters across Queensland (latitudinal span of approx. 1700 km) into EDTA blood collection tubes. A commercially available ELISA (DiroCHEK®) was used to detect canine heartworm antigen in untreated and heat-treated plasma. Whole blood was concurrently tested for the presence of microfilariae and D. immitis DNA using a modified Knott’s test and real-time PCR, respectively. Risk factors (age, gender, source, location) associated with the odds of positivity for canine heartworm were assessed using binary logistic regression models.

Results

A total of 16 dogs (9.6%; 95% confidence interval [CI]: 5.9–15.2%) were positive for canine heartworm based on combined test results. Heat treatment did not impact on the positivity of D. immitis antigen within samples (Cohen’s kappa = 0.98), but the optical density was significantly increased in paired plasma samples for D. immitis antigen-positive samples (Wilcoxon matched-pairs signed rank test, two-tailed P < 0.01). Location of the dog in a shelter in northern Queensland was the only risk factor significantly associated with the odds of a dog being more likely to be D. immitis antigen positive (odds ratio: 4.39; 95% CI: 1.26–13.51). All samples positive for the modified Knott’s test were also positive for D. immitis DNA by PCR.

Conclusions

This study demonstrated the presence of heartworm-positive dogs in shelters in Queensland, with positive animals significantly more likely to occur in northern Queensland than southern Queensland. Sustained testing for the presence of D. immitis microfilariae and antigen remain important diagnostic tools in areas with known and re-emerging canine heartworm activity.

Graphical Abstract

Supplementary Information

The online version contains supplementary material available at 10.1186/s13071-021-04896-y.

Production of inactivated gram-positive and gram-negative species with preserved cellular morphology and integrity

There are many approaches available to produce inactive bacteria by termination of growth, each with a different efficacy, impact on cell integrity, and potential for application in standardized inactivation protocols. The aim of this study was to compare these approaches and develop a standardized protocol for generation of inactivated Gram-positive and Gram-negative bacteria, yielding cells that are metabolically dead with retained cellular integrity i.e., preserving the surface and limited leakage of intracellular proteins and DNA. These inactivated bacteria are required for various applications, for instance, when investigating receptor-triggered signaling or bacterial contact-dependent analysis of cell lines requiring long incubation times. We inactivated eight different bacterial strains of different species by treatment with beta-propiolactone, ethanol, formalin, sodium hydroxide, and pasteurization. Inactivation efficacy was determined by culturing, and cell wall integrity assessed by quantifying released DNA, bacterial membrane and intracellular DNA staining, and visualization by scanning electron microscopy. Based on these results, we discuss the bacterial inactivation methods, and their advantages and disadvantages to study host-microbe interactions with inactivated bacteria.

Heat-treatment-induced development of the crystalline structure and chemical stoichiometry of a CuxS counter electrode, and the influence on performance of quantum-dot-sensitized solar cells

Recently, various phases of Cu_xS (1 ≤ x ≤ 2) were extensively explored as superb counter electrode (CE) materials for quantum dot-sensitized solar cells (QDSSCs). Herein, hexagonal covellite CuS (HC-CuS) with hierarchical nanostructure was grown on porous Ti substrates by chemical bath deposition, and then heat treated in the temperature range of 150-450 °C under N₂ atmosphere. The reaction process and the evolution of morphology, composition and crystalline structure of Cu_xS with the variation of heat treatment temperature were studied by XRD, SEM, EDX, TEM and XPS. The photovoltaic properties of TiO₂/CdS/CdSe QDSSCs based on Cu_xS CEs showed an obvious dependence on the element stoichiometry and crystalline structure of the Cu_xS. With HC-Cu_1.28S heat-treated at 230 °C as CEs, QDSSCs achieved a power conversion efficiency of 3.88% under one sun illumination (100 mW cm^-2, AM 1.5 G), which was higher than the counterparts with other compositions. Electrochemical impedance spectroscopy, Tafel polarization and cyclic voltammetry measurement showed that the electrocatalytic activity of HC-Cu_1.28S CE was much higher than that of other Cu_xS CEs, which supported the results of the enhanced short-circuit current density, open circuit voltage and filling factor.

Evaluation of onion juices quality following heat-treatment and their application as a sugar substitute in Kimchi

This study was conducted to evaluate the quality of onion juices that had been heat-treated for different times as well as their use as a table sugar substitute in Kimchi. The onions were steamed at 100 ∘C for 30 min and boiled at 90 ∘C for 30, 60, and 120 min. The highest cycloalliin (0.76 mM), free-sugar (sucrose 1.66 g/L, glucose 8.62 g/L, and fructose 7.64 g/L), and malic acid (0.82 g/L) contents were observed in onion boiled at 90 ∘C for 120 min. The possibility of using heat-treated onion juices as an alternative to table sugar in Kimchi was evaluated by comparing the lactic acid bacteria count, pH, acidity, organic acid, and free-sugar in these juices with those in Kimchi prepared using table sugar (control). The total viable bacteria and lactic acid bacteria showed similar growth patterns as in the control. The average pH reduction and increase in titratable acidity (%) in all treated Kimchi samples during fermentation for 4 weeks were 1.18 ± 0.05 and 0.81 ± 0.06, respectively. Kimchi with onion juice heat-treated for 120 min (K120) had the most similar lactic acid and acetic acid contents to that in the control after fermentation for 4 weeks. The highest mannitol level after fermentation for 4 weeks was detected in K120, which showed better sensory qualities compared to the control.

Cyclic fatigue resistance, torsional resistance, and metallurgical characteristics of M3 Rotary and M3 Pro Gold NiTi files

Objectives

To evaluate the mechanical properties and metallurgical characteristics of the M3 Rotary and M3 Pro Gold files (United Dental).

Materials and Methods

One hundred and sixty new M3 Rotary and M3 Pro Gold files (sizes 20/0.04 and 25/0.04) were used. Torque and angle of rotation at failure (n = 20) were measured according to ISO 3630-1. Cyclic fatigue resistance was tested by measuring the number of cycles to failure in an artificial stainless steel canal (60° angle of curvature and a 5-mm radius). The metallurgical characteristics were investigated by differential scanning calorimetry. Data were analyzed using analysis of variance and the Student-Newman-Keuls test.

Results

Comparing the same size of the 2 different instruments, cyclic fatigue resistance was significantly higher in the M3 Pro Gold files than in the M3 Rotary files (p < 0.001). No significant difference was observed between the files in the maximum torque load, while a significantly higher angular rotation to fracture was observed for M3 Pro Gold (p < 0.05). In the DSC analysis, the M3 Pro Gold files showed one prominent peak on the heating curve and 2 prominent peaks on the cooling curve. In contrast, the M3 Rotary files showed 1 small peak on the heating curve and 1 small peak on the cooling curve.

Conclusions

The M3 Pro Gold files showed greater flexibility and angular rotation than the M3 Rotary files, without decrement of their torque resistance. The superior flexibility of M3 Pro Gold files can be attributed to their martensite phase.

Evaluation of heat-treating heartworm-positive canine serum samples during treatment with Advantage Multi® for Dogs and doxycycline

Background

The use of heat-treatment in canine and feline serum has been hypothesized to break the formation of antigen-antibody complexes, thereby freeing the heartworm antigen allowing for detection by commercially available heartworm antigen kits. While studies have analyzed the effect of heat-treating serum and plasma samples in the detection of heartworm antigen, these studies have not utilized necropsy verified results for validation. This study evaluated the use of heat-treating serum samples in experimentally infected dogs during adulticidal treatment in comparison with necropsy adult heartworm recovery.

Methods

As part of a primary study, a total of 16 dogs were experimentally infected with 16 sexually mature adult heartworms using surgical transplantation, allocating 8 dogs in both the control and treated group. Treated dogs received 10 months of topical administration of Advantage Multi® for Dogs (10% Imidacloprid + 2.5% Moxidectin) every 4 weeks and 30 days of 10 mg/kg doxycycline BID. Blood samples were collected from all study animals prior to surgical transplantation of adult heartworms, on study days 0, 1, 3, 7, 14, 21, 28, and every 4 weeks thereafter for the duration of this study. Concentration of heartworm antigen was tested using the DiroCHEK® heartworm antigen test kit using serum samples both pre- and post-heat-treatment. Serum samples were heat-treated at 103 °C in a dry heat block for 10 min and centrifuging at 1818× g for 20 min.

Results

There were a total of 4 instances (days 56, 140, 224 and 252) in 3 treated dogs in which a serum sample converted from negative for the detection of heartworm antigen prior to heat-treatment to positive for the detection of heartworm antigen post-heat-treatment. At necropsy, these dogs had no adult heartworms recovered and were all negative on antigen testing prior to and after heat treatment. There was 100% accuracy in the detection of either no infection, or 1–2 adult heartworm infections using the DiroCHEK in serum samples with and without heat-treatment at the time of necropsy.

Conclusions

The DiroCHEK accurately diagnosed all dogs with live adults recovered at necropsy as heartworm antigen positive and all those dogs with no live adults recovered at necropsy as heartworm antigen negative without the use of heat-treatment for samples taken on the day of necropsy. Therefore, these results indicate that the use of heat-treating serum samples did not provide data of any additional value in the diagnosis of heartworm-positive dogs receiving treatment in this study. Additionally, these results may indicate that the conversion of serum samples from negative to positive for the presence of heartworm antigen with heat-treatment may not always accurately diagnose live adult heartworm infections since no adult heartworms were recovered at necropsy for those dogs in which a conversion event occurred. These conversion events may be detecting residual antigen leftover after all adult worms have died or may even be detecting off- target antigens, which have been denatured during heat-treatment. While a necropsy was not performed at the time of the conversion events, no live adult worms were recovered from any of the dogs in which a conversion event occurred earlier in treatment.

Electronic supplementary material

The online version of this article (10.1186/s13071-018-2685-z) contains supplementary material, which is available to authorized users.

Radon exhalation study of manganese clay residue and usability in brick production

The reuse of by-products and residue streams is an important topic due to environmental and financial aspects. Manganese clay is a residue of manganese ore processing and is generated in huge amounts. This residue may contain some radionuclides with elevated concentrations. In this study, the radon emanation features and the massic exhalation rate of the heat-treated manganese clay were determined with regard to brick production. From the manganese mud depository, 20 samples were collected and after homogenization radon exhalation characteristics were determined as a function of firing temperatures from 100 to 750 °C. The major naturally occurring radionuclides ⁴⁰K, ²²⁶Ra and ²³²Th concentrations were 607 ± 34, 52 ± 6 and 40 ± 5 Bq kg^-1, respectively, comparable with normal clay samples. Similar to our previous studies a strong correlation was found between the internal structure and the radon emanation. The radon emanation coefficient decreased by ∼96% from 0.23 at 100 °C to 0.01 at 750 °C. The massic radon exhalation rate of samples fired at 750 °C reduced by 3% compared to samples fired at 100 °C. In light of the results, reusing of manganese clay as a brick additive is possible without any constraints.

Evolution of some physicochemical and antioxidant properties of black garlic whole bulbs and peeled cloves

Black garlic was processed at three different temperatures of heat treatment (72°, 75° and 78°C) and close to 90% of relative humidity. Two types of material source were used: whole bulbs and peeled cloves. Total soluble solids content (°Brix), pH, water activity (aw), browning intensive (L value), total polyphenol content, antioxidant capacity and total polyphenol index of the raw and heated garlic were determined. This study showed the changes occurring in the physicochemical and antioxidant properties of the garlic during the heat-treatment evolution. The soluble solids content (°Brix) in garlic increased gradually and the pH decreased in whole bulbs and peeled garlics. The polyphenol content measured by the Folin-Ciocalteu method showed a significant increase during the heat-treatment in all the cases. Also, the antioxidant capacity measured by the ABTS radical increased significantly during the heat-treatment.

Optimization of expression and properties of the recombinant acetohydroxyacid synthase of Thermotoga maritima

The data provide additional support of the characterization of the biophysical and biochemical properties of the enzyme acetohydroxyacid synthase from the hyperthermophilic bacterium Thermotoga maritima (Eram et al., 2015) [1]. The genes encoding the enzyme subunits have been cloned and expressed in the mesophilic host Escherichia coli. Detailed data include information about the optimization of the expression conditions, biophysical properties of the enzyme and reconstitution of the holoenzyme from individually expressed and purified subunits.

Influencing effect of heat-treatment on radon emanation and exhalation characteristic of red mud

The reuse of industrial by-products is important for members of numerous industrial sectors. However, though the benefits of reuse are evident from an economical point of view, some compounds in these materials can have a negative effect on users' health. In this study, the radon emanation and exhalation features of red mud were surveyed using heat-treatment (100-1200 °C). As a result of the 1200°C-treated samples, massic radon exhalation capacity reduced from 75 ± 10 mBq kg(-1) h(-1) to 7 ± 4 mBq kg(-1) h(-1), approximately 10% of the initial exhalation rate. To find an explanation for internal structural changes, the porosity features of the heat-treated samples were also investigated. It was found that the cumulative pore volume reduced significantly in less than 100 nm, which can explain the reduced massic exhalation capacity in the high temperature treated range mentioned above. SEM snapshots were taken of the surfaces of the samples as visual evidence for superficial morphological changes. It was found that the surface of the high temperature treated samples had changed, proving the decrement of open pores on the surface.

Characterization of Pb₂₄Te₇₆ quantum dot thin film synthesized by inert gas condensation

Air-stable and thermal-stable lead telluride quantum dot was successfully prepared on glass substrate by inert gas condensation (IGC) method. Argon (Ar) is the inert gas used during deposition process with a constant flow rate of 3 × 10(-3)Torr. The effect of heat-treatment process at different times was studies for structure, optical and electrical properties for nanocrystalline thin films. The structures of the as deposited and heat-treated films were investigated using grazing incident in-plane X-ray diffraction (GIIXD). The GIIXD pattern showed nanostructure face centered cubic structure of PbTe thin films. The energy dispersive X-ray analysis (EDX) of as deposited PbTe thin film was carried out and showed that the atomic ratio of Pb/Te was 24/76. The particle size of the as deposited PbTe film and after stored it in an unhumid atmosphere are 6.8 ± 0.3 nm and 7.2 ± 0.3 nm respectively as estimated form TEM image (i.e. in the same level of particle size). However, the particle size was changed to be 11.8 ± 0.3 nm after heat-treated for 5h at 473K. These particle size values of PbTe thin film are smaller than its Bohr radius. The estimated value of optical band gap Eg decreased from 1.71 eV for the as deposited film to 1.62 eV for film heat-treated (5 h at 473K). The dc electrical conductivity is increased with raising temperature in the range (303-473K) for all thin films under investigation. The deduced activation energy decreased from 0.222 eV for as deposited sample to 0.125 eV after heat-treated at 473K for 5 h.