Ice crystallization under cryogenic cooling in lipid membrane nanoconfined geometry: Time-resolved structural dynamics

Time-resolved structural investigations of crystallization of water in lipid/protein/salt mesophases at cryogenic temperatures are significant for comprehension of ice nanocrystal nucleation kinetics in lipid membranous systems and can lead to a better understanding of how to experimentally retard the ice formation that obstructs the protein crystal structure determination. Here, we present a time-resolved synchrotron microfocus X-ray diffraction (TR-XRD) study based on ∼40,000 frames that revealed the dynamics of water-to-ice crystallization in a lipid/protein/salt mesophase subjected to cryostream cooling at 100 K. The monoolein/hemoglobin/salt/water system was chosen as a model composition related to protein-loaded lipid cubic phases (LCP) broadly used for the crystallization of proteins. Under confinement in the nanoscale geometry, metastable short-living cubic ice (I_c) rapidly crystallized well before the formation of hexagonal ice (I_h). The detected early nanocrystalline states of water-to-ice transformation in multicomponent systems are relevant to a broad spectrum of technologies and understanding of natural phenomena, including crystallization, physics of water nanoconfinement, and rational design of anti-freezing and cryopreservation systems.

Properties of electrode-supported lipid cubic mesophase films with embedded gramicidin A: structure and ion-transport studies

The lipid cubic phase (LCP) is a nanomaterial composed of water channels surrounded by lipid bilayers. LCPs are stable at room temperature and are biocompatible. These features make the lipid cubic phases similar to biological membranes, and hence, are favorable for embedding membrane proteins. We show that the monoolein cubic phase deposited on the electrode forms a 3D lipid bilayer film convenient for electrochemical investigations of membrane proteins. In this research, we studied the effect of embedding an ionophoric peptide, gramicidin A (gA), on the structure and properties of the LCP film. The phase identity and structural parameters of the gramicidin-doped phase were characterized by small-angle X-ray scattering (SAXS). The potassium ion transport through the film were studied by electroanalytical methods: alternating current voltammetry (ACV), chronoamperometry (CA) and electrochemical impedance spectroscopy (EIS). Increased values for the current of the gramicidin-doped cubic phase compared to the empty cubic phase and changes of the EIS parameters confirmed that the peptide remained in the film in its active dimeric form. Our results show that the LCP can be considered a suitable 3D biomimetic film for the investigation of ion channels and other transporting membrane proteins, and for their application in electrochemical sensors.

Balanced lipase interactions for degradation-controlled paclitaxel release from lipid cubic phase formulations

Lipid cubic phase (LCP) formulations enhance the intestinal solubility and bioavailability of hydrophobic drugs by reducing precipitation and facilitating their mass transport to the intestinal surface for absorption. LCPs with an ester linkage connecting the acyl chain to the glycerol backbone (monoacylglycerols), are susceptible to chemical digestion by several lipolytic enzymes including lipases, accelerating the release of hydrophobic agents from the lipid bilayers of the matrix. Unlike regular enzymes that transform soluble substrates, lipolytic enzymes act at the interface of water and insoluble lipid. Therefore, compounds that bind to this interface can enhance or inhibit the activity of enzymes to varying extent. Here, we explore how the lipolysis rate can be tuned by the interfacial interaction of porcine pancreatic lipase with monoolein LCPs containing a known lipase inhibitor, tetrahydrolipstatin. Release of the Biopharmaceutical Classification System (BCS) class IV drug, paclitaxel, from the inhibitor-modified LCP was examined in the presence of lipase and its effectors colipase and calcium. By combining experimental dynamic digestion studies, thermodynamic measurements and molecular dynamics simulations of the competitive inhibition of lipase by tetrahydrolipstatin, we reveal the role and mode of action of lipase effectors in creating a precisely-balanced degradation-controlled LCP release system for the poorly soluble paclitaxel drug.

Modulating the release of pharmaceuticals from lipid cubic phases using a lipase inhibitor

Lipid cubic phase formulations have gained recognition as potential controlled delivery systems for a range of active pharmaceutical and biological agents on account of their desirable physiochemical properties and ability to encapsulate both hydrophobic and hydrophilic molecules. The most widely studied lipid cubic systems are those of the monoacylglycerol lipid family. These formulations are susceptible to lipolysis by a variety of enzymes, including lipases and esterases, which attack the ester bond present on the lipid chain bridging the oleic acid component to the glycerol backbone. The release of poorly soluble molecules residing in the lipid membrane portions of the phase is limited by the breakdown of the matrix; thus, presenting a potential means for further controlling and sustaining the release of therapeutic agents by targeting the matrix stability and its rate of degradation. The aims of the present study were twofold: to evaluate an approach to regulate the rate of degradation of lipid cubic phase drug delivery systems by targeting the enzyme interactions responsible for their demise; and to study the subsequent drug release profiles from bulk lipid cubic gels using model drugs of contrasting hydrophobicity. Here, hybrid materials consisting of cubic phases with monoacylglycerol lipids of different chain lengths formulated with a potent lipase inhibitor tetrahydrolipstatin were designed. Modulation of the release of a hydrophobic model pharmaceutical, a clofazimine salt, was obtained by exploiting the matrices' enzyme-driven digestion. A stable cubic phase is described, displaying controlled degradation with at least a 4-fold improvement compared to the blank systems shown in inhibitor-containing cubic systems. Sustained release of the model hydrophobic pharmaceutical was studied over 30 days to highlight the advantage of incorporating an inhibitor into the cubic network to achieve tunable lipid release systems. This is done without negatively affecting the structure of the matrix itself, as shown by comprehensive small-angle x-ray scattering experiments.

In Meso In Situ Serial X-Ray Crystallography (IMISX): A Protocol for Membrane Protein Structure Determination at the Swiss Light Source

The lipid cubic phases (LCP) have enabled the determination of many important high-resolution structures of membrane proteins such as G-protein-coupled receptors, photosensitive proteins, enzymes, channels, and transporters. However, harvesting the crystals from the glass or plastic plates in which crystals grow is challenging. The in meso in situ serial X-ray crystallography (IMISX) method uses thin plastic windowed plates that minimize LCP crystal manipulation. The method, which is compatible with high-throughput in situ measurements, allows systematic diffraction screening and rapid data collection from hundreds of microcrystals in in meso crystallization wells without direct crystal harvesting. In this chapter, we describe an IMISX protocol for in situ serial X-ray data collection of LCP-grown crystals at both cryogenic and room temperatures which includes the crystallization setup, sample delivery, automated serial diffraction data collection, and experimental phasing. We also detail how the IMISX method was applied successfully for the structure determination of two novel targets-the undecaprenyl-pyrophosphate phosphatase BacA and the chemokine G-protein-coupled receptor CCR2A.

Interaction of anions with lipid cubic phase membranes, an electrochemical impedance study

HYPOTHESIS

Electrochemical impedance spectroscopy is useful to monitor anionic interactions with a Lipid Cubic Phase, as previously demonstrated for cationic interaction (Khani Meynaq et al., 2016). It was expected that the smaller hydrophilic anions, acetate and chloride, would interact differently than the large tryptophan anion with its hydrophobic tail.

EXPERIMENT

The impedance measurements enabled estimation of resistances and capacitances of a freestanding lipid cubic phase membrane at exposure to 4 and 40 mM solutions of NaCl, NaOAc and NaTrp. Small-angle X-ray scattering was used for cubic phase identification and to track structural changes within the cubic phase when exposed to the different electrolytes.

FINDINGS

The membrane resistance increases at exposure to the electrolytes in the order Cl^- < OAc^- < Trp^-. The membrane resistance decreases with time at exposure to the hydrophilic anions and increases with time at Trp^- exposure. The membrane capacitances were lower for NaTrp compared to NaCl and NaOAc at the corresponding concentrations which is consistent with the results from SAXRD. It is concluded that Trp^- ions do not enter the aqueous channels of the cubic phase but are strongly adsorbed to the membrane/electrolyte interface leading to large alteration of the lipid phase structure and a high membrane resistance.

New crystal forms of the integral membrane Escherichia coli quinol:fumarate reductase suggest that ligands control domain movement

Quinol:fumarate reductase (QFR) is an integral membrane protein and a member of the respiratory Complex II superfamily. Although the structure of Escherichia coli QFR was first reported almost twenty years ago, many open questions of catalysis remain. Here we report two new crystal forms of QFR, one grown from the lipidic cubic phase and one grown from dodecyl maltoside micelles. QFR crystals grown from the lipid cubic phase processed as P1, merged to 7.5 Å resolution, and exhibited crystal packing similar to previous crystal forms. Crystals grown from dodecyl maltoside micelles processed as P2₁, merged to 3.35 Å resolution, and displayed a unique crystal packing. This latter crystal form provides the first view of the E. coli QFR active site without a dicarboxylate ligand. Instead, an unidentified anion binds at a shifted position. In one of the molecules in the asymmetric unit, this is accompanied by rotation of the capping domain of the catalytic subunit. In the other molecule, this is associated with loss of interpretable electron density for this same capping domain. Analysis of the structure suggests that the ligand adjusts the position of the capping domain.

Lipidic liquid crystalline cubic phases for preparation of ATP-hydrolysing enzyme electrodes

The lipidic liquid-crystalline cubic phase (LCP) is a membrane-mimetic material useful for the stabilization and structural analysis of membrane proteins. Here, we focused on the incorporation of the membrane ATP-hydrolysing sodium/potassium transporter Na⁺/K⁺-ATPase (NKA) into a monoolein-derived LCP. Small-angle X-ray scattering was employed for the determination of the LCP structure, which was of Pn3m symmetry for all the formulations studied. The fully characterized NKA-LCP material was immobilized onto a glassy carbon electrode, forming a highly stable enzyme electrode and a novel sensing platform. A typical NKA voltammetric signature was monitored via the anodic reaction of tyrosine and tryptophan residues. The in situ enzyme activity evaluation was based on the ability of NKA to transform ATP to ADP and free phosphate, the latter reacting with ammonium molybdate to form the ammonium phosphomolybdate complex under acidic conditions. The square-wave voltammetric detection of phosphomolybdate was performed and complemented with spectrophotometric measurement at 710nm. The anodic voltammetric response, corresponding to the catalytic ATP-hydrolysing function of NKA incorporated into the LCP, was monitored at around + 0.2V vs. Ag/AgCl in the presence or absence of ouabain, a specific NKA inhibitor. NKA incorporated into the LCP retained its ATP-hydrolysing activity for 7 days, while the solubilized protein became practically inactive. The novelty of this work is the first incorporation of NKA into a lipidic cubic phase with consequent enzyme functionality and stability evaluation using voltammetric detection. The application of LCPs could also be important in the further development of new membrane protein electrochemical sensors and enzyme electrodes.

Aspects on mediated glucose oxidation at a supported cubic phase

A supported liquid crystalline cubic phase housing glucose oxidase on an electrode surface has been suggested as bio-anode in a biofuel. The purpose of this investigation is to clarify some aspect on the mediated enzymatic oxidation of glucose in such a bio-anode where the mediator ferrocene-carboxylic acid and glucose were dissolved in the solution. The enzyme glucose oxidase was housed in the water channels of the mono-olein cubic phase. The system was investigated with cyclic voltammetry at different scan rates and the temperature was varied between 15°C and 30°C. The diffusion coefficient of the mediator and also the film resistance was estimated showing a large decrease in the mass-transport properties as the temperature was decreased. The current from mediated oxidation of glucose at the electrode surface increased with decreasing film thickness. The transport of the mediator in the cubic phase was the rate-limiting step in the overall reaction, where the oxidation of glucose took place at the outer surface of the cubic phase.