Enhanced photo-Fenton activity and stability for sulfamethoxazole degradation by FeS2@TiO2 heterojunction derived from MIL-125

FT-x composites with core-shell structure (FT = FeS₂@TiO₂, x represents the mass ratio of the used FeCl₃·6H₂O to MIL-125) were fabricated by a hydrothermal method using MIL-125(Ti) as a self-sacrificing template. Both the photo-Fenton activity and stability of the FT-1 were improved greatly in comparison with its counterparts due to the unique core-shell structure and synergistic effect between FeS₂ and TiO₂. Especially, the Fe leaching concentration of FT-1 was approximately 1/10 of the individual FeS₂, benefiting from the protection effect of TiO₂ shell. Under dark condition, the formed FeOOH occupied active sites and inhibited iron cycle as well as H₂O₂ decomposition, leading to the inactivation of FT-1. UV light irradiation not only boosted the catalytic activity but also prevented the FT-1 from reactivity decline owning to the regeneration of Fe²⁺ by photogenerated electrons and continuous generation of ·OH. Experimental and DFT calculation results indicated that a type-II heterojunction was formed, in which photogenerated electrons were transferred from FeS₂ core to TiO₂ shell, accelerating charge separation and further boosting sulfamethoxazole (SMX) degradation. FT-1 displayed outstanding photo-Fenton activity in wide pH ranged from 2 to 6 and good anti-interfering ability toward impurities in water matrix. Besides, the reusability of FT-1 was good, in which 90% SMX degradation was maintained even after 5 runs. Noteworthy, the photo-Fenton activity was recovered via a revulcanization process, in which FeOOH was completely transformed into FeS₂. This founding provided insights for the design and construction of heterojunction with both excellent photo-Fenton activity and stability.

Experimental and Theoretical Study on the Interchange between Zr and Ti within the MIL-125-NH2 Metal Cluster

This study aims to investigate the effect of replacing Ti with Zr in the SBU of MIL-125-NH₂ . We were able to replace Ti with Zr in the mixed metal synthesis of MIL-125-NH₂ , for the first time. After experimentally confirming the consistency in their framework structure and comparing their morphology, we related the femtosecond light dynamics with photocatalytic CO₂ visible light conversion yield of the different variants in order to establish the composition-function relation in MIL-125 vis a vis CO₂ reduction. Introducing Zr to the system was found to cause structure defects due to missing linkers. The lifetime of the charge carriers for the mixed metal samples were shorter than that of the MIL-125-NH₂ . The study of CO₂ photocatalytic reduction under visible light indicated that the NH₂ group enhances the photocatalytic activity while the Zr incorporation inside the MIL framework introduces no significant improvements. In addition, the material systems were modelled and simulated through DFT calculations which concluded that the decrease of the photocatalytic activity is not related to the system electronic structure, insinuating that defects are the culprit.

Inlaying metal-organic framework derived pancake-like TiO2 into three-dimensional BiOI for visible-light-driven generation of vanillin from sodium lignosulfonate

Pancake-like TiO₂ (M-TiO₂) derived from the metal-organic framework was inlaid into three-dimensional flower-like BiOI through a facile solvothermal method. M-TiO₂ supplies large surface area and mesoporous structure for attachment and transfer of the substrates and products, while BiOI acts as a photosensitizer to absorb visible light and generates electrons and holes. The distinct structure of M-TiO₂/BiOI gives a favorable contact between the two monomers, and promotes the transfer of charge carriers. In conjunction with the proper band positions of M-TiO₂ and BiOI, the efficient separation of electron-hole pairs is attained. Benefiting from the above cooperative effects of M-TiO₂ and BiOI, the performance for the vanillin generation from sodium lignosulfonate (SLS) over M-TiO₂/BiOI composites has a prominent improvement under visible light. Specifically, the yield over optimal M-TiO₂/BiOI sample is about 5.8 mg/g_SLS, obviously superior to that over pristine M-TiO₂ (~1 mg/g_SLS) and BiOI (~1.1 mg/g_SLS). It is found that h⁺ and O₂^- play the key role for vanillin generation from sodium lignosulfonate, and the low vanillin generation under UV-vis light sheds light on that OH is an adverse factor. We hoped that this work could inspire the studies on the photocatalytic valorization of biomass using noble metal-free catalysts.

TiO2-Containing Carbon Derived from a Metal-Organic Framework Composite: A Highly Active Catalyst for Oxidative Desulfurization

A new metal-organic framework (MOF) composite consisting of Ti- and Zn-based MOFs (ZIF-8(x)@H₂N-MIL-125; in brief, ZIF(x)@MOF) was designed and synthesized. The pristine MOF [H₂N-MIL-125 (MOF)]- and an MOF-composite [ZIF(30)@MOF]-derived mesoporous carbons consisting of TiO₂ nanoparticles were prepared by pyrolysis (named MDC-P and MDC-C, respectively). MDC-C showed a higher surface area, larger pore sizes, and larger mesopore volumes than MDC-P. In addition, the TiO₂ nanoparticles on MDC-C have more uniform shapes and sizes and are smaller than those of MDC-P. The obtained MDC-C and MDC-P [together with MOF, ZIF(30)@MOF, pure/nanocrystalline TiO₂, and activated carbon] were applied in the oxidative desulfurization reaction of dibenzothiophene in a model fuel. The MDC-C, even with a lower TiO₂ content than that of MDC-P, showed an outstanding catalytic performance, especially with a very low catalyst dose (i.e., a very high quantity of dibenzothiophene was converted per unit weight of the catalyst), fast kinetics (∼3 times faster than that for MDC-P), and a low activation energy (lower than that for any reported catalyst) for the oxidation of dibenzothiophene. The large mesopores of MDC-C and the well-dispersed/small TiO₂ might be the dominant factors for the superior catalytic conversions. The oxidative desulfurization of other sulfur-containing organic compounds with various electron densities was also studied with MDC-C to understand the mechanism of catalysis. Moreover, the MDC-C catalyst can be reused many times in the oxidative desulfurization reaction after a simple washing with acetone. Finally, composing MOFs and subsequent pyrolysis is suggested as an effective way to prepare a catalyst with well-dispersed active sites, large pores, and high mesoporosity.