Geometric and Inertial Properties of the Pig Head and Brain in an Anatomical Coordinate System

Porcine models in injury biomechanics research often involve measuring head or brain kinematics. Translation of data from porcine models to other biomechanical models requires geometric and inertial properties of the pig head and brain, and a translationally relevant anatomical coordinate system (ACS). In this study, the head and brain mass, center of mass (CoM), and mass moments of inertia (MoI) were characterized, and an ACS was proposed for the pre-adolescent domestic pig. Density-calibrated computed tomography scans were obtained for the heads of eleven Large White × Landrace pigs (18-48 kg) and were segmented. An ACS with a porcine-equivalent Frankfort plane was defined using externally palpable landmarks (right/left frontal process of the zygomatic bone and zygomatic process of the frontal bone). The head and brain constituted 7.80 ± 0.79% and 0.33 ± 0.08% of the body mass, respectively. The head and brain CoMs were primarily ventral and caudal to the ACS origin, respectively. The mean head and brain principal MoI (in the ACS with origin at respective CoM) ranged from 61.7 to 109.7 kg cm2, and 0.2 to 0.6 kg cm2, respectively. These data may aid the comparison of head and brain kinematics/kinetics data and the translation between porcine and human injury models.

The osseous fusion patterns in an equine limb: A theoretical deconstruction of the evolutionary mechanisms

Adaptations in equine limbs, including fusion of its bones, such as the metapodials II and IV (splint bones) with metapodial III (cannon bone), have been debated. It is argued that cursorial adaptations in equine limbs with a progressive reduction in the number of digits lighten up the limbs and facilitate fast running. Similar fusions in other bones, such as the radius and ulna, tend to exhibit similar traits. For example, the fusion often occurs in a disto-proximal direction while leaving sharp ridges. This article proposes a model to understand the biomechanical advantages that a fused symmetric system of cannon and splint bones offers and tries to investigate osseous fusion from an evolutionary perspective. It demonstrated the uniqueness of this system from the context of symmetry and the presence of an array of parallel axes of rotation in equine limbs that amplifies the kinetic energy by maximizing the moment of inertia. The model highlighted the robustness of such an evolutionary mechanism in place and elucidated why it is a preferable construct. Furthermore, the discourse proposes a zipping action to describe the osseous fusion before making predictions on where the equine limb adaptations are perhaps heading.

Comparison of sheep and human middle-ear ossicles: anatomy and inertial properties

The sheep middle ear has been used in training to prepare physicians to perform surgeries and to test new ways of surgical access. This study aimed to (1) collect anatomical data and inertial properties of the sheep middle-ear ossicles and (2) explore effects of these features on sound transmission, in comparison to those of the human. Characteristic dimensions and inertial properties of the middle-ear ossicles of White-Alpine sheep (n = 11) were measured from high-resolution micro-CT data, and were assessed in comparison with the corresponding values of the human middle ear. The sheep middle-ear ossicles differed from those of human in several ways: anteroinferior orientation of the malleus handle, relatively small size of the incus with a relatively short distance to the lenticular process, a large area of the articular surfaces at the incudostapedial joint, and a relatively small moment of inertia along the anterior-posterior axis. Analysis in this study suggests that structure and orientation of the middle-ear ossicles in the sheep are conducive to an increase in the hinge-like ossicular-lever-action around the anterior-posterior axis. Considering the substantial anatomical differences, outcomes of middle-ear surgeries would presumably be difficult to assess from experiments using the sheep middle ear.

Modeling movements of a long hand-held tool with effects of moments of inertia

The current experiment aimed to investigate the effects of weight position on movement time in target acquisition tasks. Subsequently, a simple mathematical model was developed to describe the movement time with the moments of inertia. Ten right-handed participants conducted continuous Fitts pointing tasks using a laparoscopic instrument as a long hand-held tool. The results showed significant effects of weight position on movement time. Furthermore, an extended Fitts' law model is proposed for the moments of inertia produced by the hand, instrument, and a constant mass in different positions. This predictive model accounted for 63% of the variance in movement time. The predictive model proposed in the present study can be applied not only to estimate movement time given a particular target width, instrument movement amplitude, and weight position of a long hand-held tool but also to standardize movement time and establish training standards.

Magnitude of loads influences the site of failure of highly curved bones

The structure and material properties of bones along with applied boundary conditions determine the region of peak stresses, where fracture is expected to occur. As the site of peak stresses is not influenced by the magnitude of applied load, the fracture site is not expected to change during fatigue loading of whole bone at different loads. However, in a highly curved bone such as the rat ulna, the magnitude of applied loads was found to influence the fracture site. Fatigue loading was conducted under load control on intact rat forearms and on excised ulnae. The distance to the site of failure from the proximal olecranon process of ulnae was determined. In intact forearms, the site of failure demonstrated a linear progression distally, towards sites with lower moment of inertia (or sites exhibiting lower section modulus). Intact rat forearms and excised ulnae loaded to failure at low loads fractured 2-3mm distal to where they failed when applying high loads. This indicates a shift in the site of failure by approximately 10% of whole bone length just by varying the applied load magnitude. The site of failure in excised ulnae was similar when loading at 2Hz or at 4Hz, suggesting that this was frequency independent in this range and indicating that strain rate was not an important contributing factor. Creep loading of excised ulnae also demonstrated similar changes in the site of failure, indicating that magnitude of loads, and not type of loading were important in determining the site of failure. This has important implications with regards to the volume of bone that undergoes damage under physiological loading, before it fails.