Nanocatalytic Anti-Tumor Immune Regulation

Immunotherapy has brought a new dawn for human being to defeat cancer. Although existing immunotherapy regimens (CAR-T, etc.) have made breakthroughs in the treatments of hematological cancer and few solid tumors such as melanoma, the therapeutic efficacy on most solid tumors is still far from being satisfactory. In recent years, the researches on tumor immunotherapy based on nanocatalytic materials are under rapid development, and significant progresses have been made. Nanocatalytic medicine has been demonstrated to be capable of overcoming the limitations of current clinicnal treatments by using toxic chemodrugs, and exhibits highly attractive advantages over traditional therapies, such as the enhanced and sustained therapeutic efficacy based on the durable catalytic activity, remarkably reduced harmful side-effects without using traditional toxic chemodrugs, and so on. Most recently, nanocatalytic medicine has been introduced in the immune-regulation for disease treatments, especially, in the immunoactivation for tumor therapies. This article presents the most recent progresses in immune-response activations by nanocatalytic medicine-initiated chemical reactions for tumor immunotherapy, and elucidates the mechanism of nanocatalytic medicines in regulating anti-tumor immunity. By reviewing the current research progress in the emerging field, this review will further highlight the great potential and broad prospects of nanocatalysis-based anti-tumor immune-therapeutics.

Nitrogen vacancy-rich carbon nitride anchored with iron atoms for efficient redox dyshomeostasis under ultrasound actuation

Traditional Fe-based Fenton reaction for inducing oxidative stress is restricted by random charge transfer without oriental delivery, and the resultant generation of reactive oxygen species (ROS) is always too simplistic to realize a satisfactory therapeutic outcome. Herein, FeNv/CN nanosheets rich in nitrogen vacancies are developed for high-performance redox dyshomeostasis therapy after surface conjugation with polyethylene glycol (PEG) and cyclic Arg-Gly-Asp (cRGD). Surface defects in FeNv/CN serve as electron traps to drive the directional transfer of the excited electrons to Fe atom sites under ultrasound (US) actuation, and the highly elevated electron density promote the catalytic conversion of H2O2 into ·OH. Meanwhile, energy band edges of FeNv/CN favor the production of 1O2 upon interfacial redox chemistry, which is enhanced by the optimal separation/recombination dynamics of electron/hole pairs. Moreover, intrinsic peroxidase-like activity of FeNv/CN contributes to the depletion of reductant glutathione (GSH). Under the anchoring effect of cRGD, PEGylated FeNv/CN can be efficiently enriched in the tumorous region, which is ultrasonically activated for concurrent ROS accumulation and GSH consumption in cytosolic region. The deleterious redox dyshomeostasis not only eradicates primary tumor but also suppresses distant metastasis via antitumor immunity elicitation. Collectively, this study could inspire more facile designs of chalybeates for medical applications.

Recent advances in transesterification for sustainable biodiesel production, challenges, and prospects: a comprehensive review

Biodiesel, a renewable and sustainable alternative to fossil fuels, has garnered significant attention as a potential solution to the growing energy crisis and environmental concerns. The review commences with a thorough examination of feedstock selection and preparation, emphasizing the critical role of feedstock quality in ensuring optimal biodiesel production efficiency and quality. Next, it delves into the advancements in biodiesel applications, highlighting its versatility and potential to reduce greenhouse gas emissions and dependence on fossil fuels. The heart of the review focuses on transesterification, the key process in biodiesel production. It provides an in-depth analysis of various catalysts, including homogeneous, heterogeneous, enzyme-based, and nanomaterial catalysts, exploring their distinct characteristics and behavior during transesterification. The review also sheds light on the transesterification reaction mechanism and kinetics, emphasizing the importance of kinetic modeling in process optimization. Recent developments in biodiesel production, including feedstock selection, process optimization, and sustainability, are discussed, along with the challenges related to engine performance, emissions, and compatibility that hinder wider biodiesel adoption. The review concludes by emphasizing the need for ongoing research, development, and collaboration among academia, industry, and policymakers to address the challenges and pursue further research in biodiesel production. It outlines specific recommendations for future research, paving the way for the widespread adoption of biodiesel as a renewable energy source and fostering a cleaner and more sustainable future.

Construction of novel potentiometric sensors modified with biogenically synthesized metal oxide nanoparticles for sensitive detection of the opioid agonist-antagonist nalbuphine hydrochloride in its injection

Novel and sensitive potentiometric sensors were described for the assay of nalbuphine HCl (NBP) in authentic powder and injection samples. The developed sensors were modified with alumina nanoparticles (Al2O3NPs) and copper oxide nanoparticles (CuONPs). The nanoscale materials were synthesized using the extract of Salvia officinalis leaves in an environmentally friendly manner. The synthesized metal oxides were fully confirmed by various analytical techniques. Scanning electron microscope confirmed the morphology of nanosized materials with even distribution and particle size of 55.07 ± 4.15 and 59.48 ± 4.50 nm for Al2O3NPs and CuONPs, respectively. The modified sensors were prepared in three different steps. Nalbuphine hydrochloride was mixed with phosphomolybdic acid to prepare the sensor material nalbuphine phosphomolybdate (NBP-PM). It was then mixed with polyvinyl chloride in the presence of o-nitrophenyl ether and metal oxide nanoparticles to form the membrane matrix. Finally, a copper wire was coated with the sensing material. Excellent potentials of 1.0 × 10-8-1.0 × 10-2 and 1.0 × 10-9-1.0 × 10-2 mol L-1 were measured with lower assay limits of 4.8 × 10-9 and 5.0 × 10-10 mol L-1. The average detection % were 99.28 ± 0.58% and 99.52 ± 0.28% for NBP-PM-Al2O3NPs and NBP-PM-CuONPs, correspondingly. The suitability of the described sensors was investigated in terms of various validation criteria, and the modified sensors exposed excellent applicability and insurance for the quantification of nalbuphine hydrochloride in its bulk samples and injections compared with another standard sensor. It is obvious that the developed NBP-PM-Al2O3NPs and NBP-PM-CuONPs will serve as suitable sensors for the determination of NBP.

Bioorthogonal nanozymes for breast cancer imaging and therapy

Bioorthogonal catalysis via transition metal catalysts (TMCs) enables the generation of therapeutics locally through chemical reactions not accessible by biological systems. This localization can enhance the efficacy of anticancer treatment while minimizing off-target effects. The encapsulation of TMCs into nanomaterials generates "nanozymes" to activate imaging and therapeutic agents. Here, we report the use of cationic bioorthogonal nanozymes to create localized "drug factories" for cancer therapy in vivo. These nanozymes remained present at the tumor site at least seven days after a single injection due to the interactions between cationic surface ligands and negatively charged cell membranes and tissue components. The prodrug was then administered systemically, and the nanozymes continuously converted the non-toxic molecules into active drugs locally. This strategy substantially reduced the tumor growth in an aggressive breast cancer model, with significantly reduced liver damage compared to traditional chemotherapy.

Recent advances and challenges in the utilization of nanomaterials in transesterification for biodiesel production

Due to diminishing fossil fuel supplies and rising energy needs, there has been an ever-increasing demand for renewable energy sources. The available renewable energy resources, such as solar, wind, hydropower, and biofuels, provide a new way of supplying the world's energy needs. Biofuels stand out among them because they are sustainable and have the potential to bring the idea of a global bioeconomy to life. As a result of their production of biofuels like biomethane, biohydrogen, and biodiesel, atmospheric CO₂ is being fixed, eventually lowering the world's carbon footprint. Current developments in the production of bioenergy have concentrated on producing biodiesel among other biofuels. Biodiesel is being produced from a variety of feedstocks using a number of processes, including transesterification, micro-emulsion, direct mixing, and pyrolysis. The most popular method among these is transesterification, which makes use of a variety of catalysts. As a result of the development of nanotechnology, nanocatalysts with desirable properties, such as increased catalytic activity, increased surface area, and superior thermal stability, have been made and modified. In this review, various nanocatalyst types and manufacturing processes are examined in relation to transesterification. It explores how crucial nanocatalysts are in boosting biodiesel production, highlights potential barriers, and makes recommendations for their widespread use in the future.

Investigating nanocatalyst-embedding laser-induced carbon nanofibers for non-enzymatic electrochemical sensing of hydrogen peroxide

In this present study, we explored the catalytic behaviors of the in situ generated metal nanoparticles, i.e., Pt/Ni, embedded in laser-induced carbon nanofibers (LCNFs) and their potential for H₂O₂ detection under physiological conditions. Furthermore, we demonstrate current limitations of laser-generated nanocatalyst embedded within LCNFs as electrochemical detectors and possible strategies to overcome the issues. Cyclic voltammetry revealed the distinctive electrocatalytic behaviors of carbon nanofibers embedding Pt and Ni in various ratios. With chronoamperometry at  +0.5 V, it was found that modulation of Pt and Ni content affected only current related to H₂O₂ but not other interfering electroactive substances, i.e., ascorbic acid (AA), uric acid (UA), dopamine (DA), and glucose. This implies that the interferences react to the carbon nanofibers regardless of the presence of metal nanocatalysts. Carbon nanofibers loaded only with Pt and without Ni performed best in H₂O₂ detection in phosphate-buffered solution with a limit of detection (LOD) of 1.4 µM, a limit of quantification (LOQ) of 5.7 µM, a linear range from 5 to 500 µM, and a sensitivity of 15 µA mM^-1 cm^-2. By increasing Pt loading, the interfering signals from UA and DA could be minimized. Furthermore, we found that modification of electrodes with nylon improves the recovery of H₂O₂ spiked in diluted and undiluted human serum. The study is paving the way for the efficient utilization of laser-generated nanocatalyst-embedding carbon nanomaterials for non-enzymatic sensors, which ultimately will lead to inexpensive point-of-need devices with favorable analytical performance.

A Review On Modern Approaches To Benzimidazole Synthesis

Cancer is the second most source of cessation of life globally with 9.6 million expirations each stage around the globe. The resistance to the current chemotherapies urges the researchers to develop new drugs to be available in the market. Among the wide range of drugs synthesized, heterocyclic compounds play a major role due to the abundance of heterocyclic rings in biological substances. In medicinal chemistry, benzimidazole is an important pharmacophore and a privileged structure. This bicyclic compound is made up of the fusion of a six-membered benzene ring and a five-membered imidazole ring with two nitrogen atoms at 1,3-positions. The benzimidazole ring has a great deal of stability. Many strong acids and alkalis do not affect benzimidazoles. Only under extreme conditions does benzimidazoles benzene ring cleave. Except in certain circumstances, the benzimidazole ring is also quite resistant to reduction. It is the most popular nucleus to study because of its wide range of biological functions. The recently developed methods for preparing benzimidazoles, such as condensation of o-phenylene diamines (OPDs) with aldehydes and many others using a wide range of nano, metal-based catalysts under solvent-free conditions, are discussed in detail in the current studies.

New generation advanced nanomaterials for photocatalytic abatement of phenolic compounds

Nowadays, organic pollutants create severe problems worldwide. Phenolic compounds are the harmful pollutants that are developed from industrial effluents, thus causing several environmental problems. Low-cost materials show good potential capabilities for removal of phenolic compounds but are not so effective, so modification is required. New generation nanocatalysts are thought to be excellent for phenol removal. Removal of phenolic pollutants by photodegradation may lead to the decrement of these problematic groups. In this review, (i) a new generation of catalysts for the removal of phenolic compounds is discussed, (ii) nanocatalysts for photodegradation processes, and (iii) the mechanisms involved in photodegradation processes are also discussed. It is noticeable from the analysis that new generation catalysts for photodegradation processes have been demonstrated for high removal abilities of irrefutable phenolic compounds. Finally, future perspectives are also given in this article for the further development of next-generation catalysts.

Prospecting carbon-based nanomaterials for the treatment and degradation of endocrine-disrupting pollutants

The presence of endocrine-disrupting chemicals (EDCs) in water resources has significant negative implications for the environment. Traditional technologies implemented for water treatment are not completely efficient for removing EDCs from water. Therefore, research on sustainable remediation has been mainly directed to novel decontamination approaches including nano-remediation. This emerging technology employs engineered nanomaterials to clean up the environment quickly, efficiently, and sustainably. Thus, nanomaterials have contributed to a wide variety of remediation techniques like adsorption, filtration, coagulation/flocculation, and so on. Among the vast diversity of decontamination technologies catalytic advanced oxidation processes (AOPs) outstand as simple, clean, and efficient alternatives. A vast diversity of catalysts has been developed demonstrating high efficiencies; however, the search for novel catalysts with enhanced performances continues. In this regard, nanomaterials used as nanocatalysts are exhibiting enhanced performances on AOPs due to their special nanostructures and larger specific surface areas. Therefore, in this review we summarize, compare, and discuss the recent advances on nanocatalysts, catalysts doped with metal-based nanomaterials, and catalysts doped with carbon-based nanomaterials on the degradation of EDCs. Finally, further research opportunities are identified and discussed to achieve the real application of nanomaterials to efficiently degrade EDCs from water resources.

Comparative study of different catalysts mediated FAME conversion from macroalga Padina tetrastromatica biomass and hydrothermal liquefaction facilitated bio-oil production

Marine macroalgae offer an endurable source of renewable biomass, which do not require cultivable area, fertilizers for cultivation for bioproducts production. In this study, marine brown macroalga Padina tetrastromatica as an alternate sustainable feedstock for the production of liquid fuels. Padina tetrastromatica biomass was collected from Mandapam; the coastal region of Rameswaram, Tamil Nadu, India. and the algal oil was extracted using sequential extractions using various solvents. Petroleum ether (PE) and dichloromethane (DCM) solvent fractions were found to have high lipids and further utilized for biodiesel production, wherein four different heterogeneous nanocatalysts (TiO₂, Bio-Fe, GO, and MgO) and commercial homogeneous catalysts (HCl and NaOH) were employed for the transesterification. High fatty acid methyl ester (FAME) recovery (92.3%) was achieved from TiO₂ mediated transesterification than the other conventional catalysts. Further, the conversion of algal biomass into bio-oil and by-products was carried out using hydrothermal liquefaction (HTL). Subsequently, the compounds were characterized by FT-IR and GC-MS analysis. The quality parameters of liquid biofuels were examined and they are in accordance with the international fuel standards. Thus, brown macroalga Padina tetrastromatica may be considered as an alternate feedstock for biofuel and other bioproducts production and TiO₂ would be a suitable catalyst for the conversion of FAME.

The Synthesis and Application of Ionic liquid Functionalized Mesoporous Silica SBA-15 in Organic Synthesis

Ionic liquid functionalized mesoporous silica compounds present significant advantages in organic synthesis as a catalyst. There are various preparation procedures for the synthesis of diverse ionic liquid catalysts, which have different catalytic properties with various roles in organic reactions. So, due to the increasement in usage of mesoporous materials in industry and numerous researches, in this article, we gathered the development of ionic liquids supported on SBA-15 between the years 2014 until 2021.

Amyloid-Templated Palladium Nanoparticles for Water Purification by Electroreduction

Electrocatalysis offers great promise for water purification but is limited by low active area and high uncontrollability of electrocatalysts. To overcome these constraints, we propose hybrid bulk electrodes by synthesizing and binding a Pd nanocatalyst (nano‐Pd) to the electrodes via amyloid fibrils (AFs). The AFs template is effective for controlling the nucleation, growth, and assembly of nano‐Pd on the electrode. In addition, the three‐dimensional hierarchically porous nanostructure of AFs is beneficial for loading high‐density nano‐Pd with a large active area. The novel hybrid cathodes exhibit superior electroreduction performance for the detoxification of hexavalent chromium (Cr⁶⁺), 4‐chlorophenol, and trichloroacetic acid in wastewater and drinking water. This study provides a proof‐of‐concept design of an AFs‐templated nano‐Pd‐based hybrid electrode, which constitutes a paradigm shift in electrocatalytic water purification, and broadens the horizon of its potential engineered applications.

Nanocatalyst doped bacterial cellulose-based thermosensitive nanogel with biocatalytic function for antibacterial application

Reactive oxygen species (ROS) for treating bacterial infection is an alternative strategy to overcome the drawbacks such as bacterial resistance of commonly used antibiotics. Nanocatalysts have been proved highly effective in regulating intracellular ROS level due to their intrinsic enzymes-mimicking ability. Herein, we prepared a carbon-based nanozyme doped with copper atoms with peroxidase mimetic activity to catalyze the decomposition of bio-safety dosage of H₂O₂ to highly reactive OH radicals for antibacterial treatment. Furthermore, we designed the thermo-responsive nanogels consisting of bacterial cellulose nanowhiskers as the carrier of the nanozyme. The obtained nanogels displayed remarkable intelligent response to temperature change with sol-gel transition temperature of ~33 °C and in situ gel forming ability. Moreover, the nanogels exhibited excellent biocompatibility in vitro, along with remarkable antibacterial efficacy which could inactivate 6.36 log of S. aureus and 6.01 log of E. coli in 3 h, respectively. The findings provide a novel strategy for advancing the development of nanocatalysts-based responsive biomaterials for treating bacterial infections.

Advances of nanomaterials for air pollution remediation and their impacts on the environment

One of the most favorable environmental applications of nanotechnology has been in air pollution remediation in which different nanomaterials are used as nanoadsorbents, nanocatalysts, nanofilters, and nanosensors. The nanomaterials have the ability to adsorb several contaminants existing in the air. Also, certain semiconducting nanomaterials materials can be used for photocatalytic remediation. Air contamination control can also be achieved by nanostructured membranes with pores sufficiently small to separate various pollutants from the exhaust. Nanomaterial enabled sensors are also used for the detection of harmful gases such as hydrogen sulfide, sulphur dioxide, and nitrogen dioxide. Conversely, because of the uncertainties in addition to irregularities in size, shape as well as chemical compositions, the existence of some nanomaterials might cause harmful effects on the environment along with the health of people. Thus, concerns were expressed about the transport and conversion of nanoparticles discharged into the surroundings. This review critically examined and assessed the present literature on the application of nanomaterials in the air, together with its negative impacts. The main focus is placed on the application of carbon-based and metal-based nanomaterials for air pollution remediation. It is noted that these nanomaterials demonstrating fascinating properties for improving the environmental pollution remediation system.

A comprehensive review on MXenes as new nanomaterials for degradation of hazardous pollutants: Deployment as heterogeneous sonocatalysis

MXene-based nanomaterials (MBNs) are two-dimensional materials that exhibit a series of sought after properties, including rich surface chemistry, adjustable bandgap structures, high electrical conductivity, hydrophobicity, thermal stability, and large specific surface area. MBNs have an exemplar performance when applied for the degradation of hazardous pollutants with various advanced oxidation processes such as heterogeneous sonocatalysis. As such, this work focuses on the sonocatalytic degradation of various hazardous pollutants using MXene-based catalysts. First, the general principles of sonocatalysis are examined, followed by an analysis of the main components of the MXene-based sonocatalysts and their application for pollutant degradation. Lastly, ongoing challenges are highlighted with recommendations to address the issues.

Vapor-Mediated Infiltration of Nanocatalysts for Low-Temperature Solid Oxide Fuel Cells Using Electrosprayed Dendrites

Electrode architecturing for fast electrochemical reaction is essential for achieving high-performance of low-temperature solid oxide fuel cells (LT-SOFCs). However, the conventional droplet infiltration technique still has limitations in terms of the applicability and scalability of nanocatalyst implementation. Here, we develop a novel two-step precursor infiltration process and fabricate high-performance LT-SOFCs with homogeneous and robust nanocatalysts. This novel infiltration process is designed based on the principle of a reversible sol-gel transition where the gelated precursor dendrites are uniformly deposited onto the electrode via controlled nanoscale electrospraying process then resolubilized and infiltrated into the porous electrode structure through subsequent humidity control. Our infiltration technique reduces the cathodic polarization resistance by 18% compared to conventional processes, thereby achieving an enhanced peak power density of 0.976 W cm^-2 at 650 °C. These results, which provide various degrees of freedom for forming nanocatalysts, exhibit an advancement in LT-SOFC technology.

Highly active Ni/Fe3O4/TiO2 nanocatalysts with tunable interfacial interactions for PH3 decomposition

The mixed-metal oxide Ni/Fe₃O₄/TiO₂ with two metal-oxide interfaces to catalyze sequential chemical reactions was first applied in the decomposition of phosphine gas for yellow phosphorus (P₄) production. The catalyst was prepared with tunable Ni-Fe₃O₄ and Ni-TiO₂ interactions via annealing and subsequent reduction. Ni/Fe₃O₄/TiO₂ exhibited significantly effective activity and good stability in the PH₃ decomposition, which were achieved by modulating the metal-support interaction. The characterizations by scanning electron microscopy(SEM), X-ray diffraction analysis(XRD), BET surface area measurement and X-ray photoelectron spectroscopy(XPS) were carried out. The enhancements of the Ni-Fe₃O₄ and Ni-TiO₂ dual interactions by annealing and reduction were verified and the mechanism of PH₃ decomposition over the modulated Ni/Fe₃O₄/TiO₂ catalyst was investigated. NiOOH as an active catalytic intermediate species is produced by the synergistic catalytical dual interfaces. The catalytic reaction pathways of PH₃ decomposition by the dual interfaces were firstly revealed. The results provide underlying insights in the way to promote the catalytic performance for synergistic catalysis in PH₃ decomposition.

Nano-Biocatalysts: Potential Biotechnological Applications

Biocatalysts are a biomolecule of interest for various biotechnological applications. Non-reusability and poor stability of especially enzymes has always limited their applications in large-scale processing units. Nanotechnology paves a way by conjugating the biocatalysts on different matrices. It predominantly enables nanomaterials to overcome the limited efficacy of conventional biocatalysts. Nanomaterial conjugated nanobiocatalyst have enhanced catalytic properties, selectivity, and stability. Nanotechnology extended the flexibility to engineer biocatalysts for various innovative and predictive catalyses. So developed nanobiocatalyst harbors remarkable properties and has potential applications in diverse biotechnological sectors. This article summaries various developments made in the area of nanobiocatalyst towards their applications in biotechnological industries. Novel nanobiocatalyst engineering is an area of critical importance for harnessing the biotechnological potential.

Carbon nanomaterial hybrids via laser writing for high-performance non-enzymatic electrochemical sensors: a critical review

Non-enzymatic electrochemical sensors possess superior stability and affordability in comparison to natural enzyme-based counterparts. A large variety of nanomaterials have been introduced as enzyme mimicking with appreciable sensitivity and detection limit for various analytes of which glucose and H2O2 have been mostly investigated. The nanomaterials made from noble metal, non-noble metal, and metal composites, as well as carbon and their derivatives in various architectures, have been extensively proposed over the past years. Three-dimensional (3D) transducers especially realized from the hybrids of carbon nanomaterials either with metal-based nanocatalysts or heteroatom dopants are favorable owing to low cost, good electrical conductivity, and stability. In this critical review, we evaluate the current strategies to create such nanomaterials to serve as non-enzymatic transducers. Laser writing has emerged as a powerful tool for the next generation of devices owing to their low cost and resultant remarkable performance that are highly attractive to non-enzymatic transducers. So far, only few works have been reported, but in the coming years, more and more research on this topic is foreseeable.

Insight into the surface composition of bimetallic nanocatalysts obtained from microemulsions

The enhancement of catalysts efficiency of bimetallic nanoparticles depends on the ability to exert control over surface composition. However, results relating surface composition and feeding solution of bimetallic nanoparticles synthesized in microemulsions are controversial and apparently contradictory. In order to comprehend how the resulting surface can be modified under different synthesis conditions and for different pairs of metals, a computer simulation study was carried out. The resulting surface compositions are explained based on the relative rates of deposition of the two metals, which depend on the particular metal pair, the concentration of reactants and the microemulsion composition. This study provides a satisfactory understanding of experimental results and allows us to identify the main factors affecting the nanoparticle's surface composition. Consequently, concrete and practical guidelines can be established to facilitate the experimental synthesis of bimetallic nanoparticles with tailored surfaces.

Green-synthesized nanocatalysts and nanomaterials for water treatment: Current challenges and future perspectives

Numerous hazardous environmental pollutants in water bodies, both organic and inorganic, have become a critical global issue. As greener and bio-synthesized versions of nanoparticles exhibit significant promise for wastewater treatment, this review discusses trends and future prospects exploiting the sustainable applications of green-synthesized nanocatalysts and nanomaterials for the removal of contaminants and metal ions from aqueous solutions. Recent trends and challenges about these nanocatalysts and nanomaterials and their potential applications in wastewater treatment and water purification are highlighted including toxicity and biosafety issues. This review delineates the pros and cons and critical issues pertaining to the deployment of these nanomaterials endowed with their superior surface area, mechanical properties, significant chemical reactivity, and cost-effectiveness with low energy consumption, for removal of hazardous materials and contaminants from water; comprehensive coverage of these materials for industrial wastewater remediation, and their recovery is underscored by recent advancements in nanofabrication, encompassing intelligent and smart nanomaterials.

Removal of heavy metals and radionuclides from water using nanomaterials: current scenario and future prospects

There is an increase in concern about the hazardous effects of radioactivity due to the presence of undesirable radioactive substances in our vicinity. Nuclear accidents such as Chernobyl (1986) and Fukushima (2011) have further raised concerns towards such incidents which have led to contamination of water bodies. Conventional methods of water purification are less efficient in decontamination of radioisotopes. They are usually neither cost-effective nor environmentally friendly. However, nanotechnology can play a vital role in providing practical solutions to this problem. Nano-engineered materials like metal oxides, metallic organic frameworks, and nanoparticle-impregnated membranes have proven to be highly efficient in treating contaminated water. Their unique characteristics such as high adsorption capacity, large specific surface area, high tensile strength, and excellent biocompatibility properties make them useful in the field of water purification. This review explores the present status and future prospects of nanomaterials as the next-generation water purification systems that can play an important role in the removal of heavy metals and radioactive contaminants from aqueous solutions.

A review on carbon-based materials for heterogeneous sonocatalysis: Fundamentals, properties and applications

Contamination of water resources by refractory organic pollutants is of great environmental and health concern because these compounds are not degraded in the conventional wastewater treatment plants. In recent years, sonocatalytic treatment has been considered as a promising advanced oxidation technique for the acceptable degradation and mineralization of the recalcitrant organic compounds. For this purpose, various sonocatalysts have been utilized in order to accelerate the degradation process. The present review paper provides a summary of published studies on the sonocatalytic degradation of various organic pollutants based on the application of carbon-based catalysts, including carbon nanotubes (CNTs), graphene (GR), graphene oxide (GO), reduced graphene oxide (rGO), activated carbon (AC), biochar (BC), graphitic carbon nitride (g-C₃N₄), carbon doped materials, buckminsterfullerene (C60) and mesoporous carbon. The mechanism of sonocatalytic degradation of different organic compounds by the carbon-based sonocatalysts has been well assessed based on the literature. Moreover, the details of experimental conditions such as sonocatalyst dosage, solute concentration, ultrasound power, applied frequency, initial pH and reaction time related to each study have also been discussed in this review. Finally, concluding remarks as well as future challenges in this research field regarding new areas of study are also discussed and recommended.

Non-biodegradable polymeric waste pyrolysis for energy recovery

Nowadays, increasing population, widespread urbanization, rise in living standards together with versatile use of polymers have caused non-biodegradable polymeric wastes affecting the environment a chronic global problem, simultaneously, the existing high energy demand in our society is a matter of great concern. Hence forth, this review article provides an insight into the technological approach of pyrolysis emphasizing catalytic pyrolysis for conversion of polymeric wastes into energy products and presents an alternative waste management technique which is a leap towards developing sustainable environment. Pyrolysis of waste non-biodegradable polymer materials involves controlled thermal decomposition in the absence of oxygen, cracking their macromolecules into lower molecular weight ones, resulting into the formation of a wide range of products from hydrogen, hydrocarbons to coke. Nanocatalyzed pyrolysis is a recommended solution to the low thermal conductivity of polymers, promoting faster reactions in breaking the C-C bonds at lower temperatures, denoting less energy consumption and enabling enhancement in the process selectivity, whereby higher value added products are generated with increased yield. Nanotechnology plays an indispensable role in academic research as well as in industrial applications. Existing reviews illustrate that one of the oldest application field of nanotechnology is in the arena of nanocatalysis. Nanocatalysis closes the gap between homo and heterogeneous catalyses while combines their advantageous characteristics and positive aspects, reducing the respective drawbacks. During the current nanohype, nanostructured catalysts are esteemed materials and their exploration provide promising solutions for challenges from the perspective of cost and factors influencing catalytic activity, due to their featured high surface area to volume ratio which render enhanced properties with respect to the bulk catalyst.

In situ redox-oxidation polymerization for magnetic core-shell nanostructure with polydopamine-encapsulated-Au hybrid shell

This work reports a facile one-step method for the fabricating Fe₃O₄@Au/polydopamine sandwich-like core-shell nanostructure, in which the Au/polydopamine (Au/PDA) hybrid shell is obtained via an in situ redox-oxidation polymerization between the HAuCl₄ and dopamine. The content of Au nanocrystals, shell thickness, and particle sizes are tunable by varying the experimental parameters. Intriguingly, this general method can be applied for different functional nanostructures such as the β-FeOOH@Au/PDA, SiO₂@Au/PDA, and CNT@Au/PDA nanocomposites. A possible formation mechanism is proposed and it is found that the surface interaction plays a key role in determining the final nanostructure. The as-prepared Fe₃O₄@Au/PDA exhibited eminent catalytic activity on the reduction of 4-nitrophenol. Since the external PDA shell prevents the Au nanocrystals from leaching during the reduction, the cycling activity has been maintained as high as 95% after seven times of catalytic reaction.

Probing Atomic Distributions in Mono- and Bimetallic Nanoparticles by Supervised Machine Learning

Properties of mono- and bimetallic metal nanoparticles (NPs) may depend strongly on their compositional, structural (or geometrical) attributes, and their atomic dynamics, all of which can be efficiently described by a partial radial distribution function (PRDF) of metal atoms. For NPs that are several nanometers in size, finite size effects may play a role in determining crystalline order, interatomic distances, and particle shape. Bimetallic NPs may also have different compositional distributions than bulk materials. These factors all render the determination of PRDFs challenging. Here extended X-ray absorption fine structure (EXAFS) spectroscopy, molecular dynamics simulations, and supervised machine learning (artificial neural-network) method are combined to extract PRDFs directly from experimental data. By applying this method to several systems of Pt and PdAu NPs, we demonstrate the finite size effects on the nearest neighbor distributions, bond dynamics, and alloying motifs in mono- and bimetallic particles and establish the generality of this approach.

Nanostructured Metal Catalysts for Selective Hydrogenation and Oxidation of Cellulosic Biomass to Chemicals

Conversion of biomass to chemicals provides essential products to human society from renewable resources. In this context, achieving atom-economical and energy-efficient conversion with high selectivity towards target products remains a key challenge. Recent developments in nanostructured catalysts address this challenge reporting remarkable performances in shape and morphology dependent catalysis by metals on nano scale in energy and environmental applications. In this review, most recent advances in synthesis of heterogeneous nanomaterials, surface characterization and catalytic performances for hydrogenation and oxidation for biorenewables with plausible mechanism have been discussed. The perspectives obtained from this review paper will provide insights into rational design of active, selective and stable catalytic materials for sustainable production of value-added chemicals from biomass resources.

Organic matter decomposition before arsenic speciation analysis of water sample - "Soft decomposition" using nano-photocatalysts

The applicability of photolysis in the speciation analysis of arsenic is investigated. The use of nano scale semiconductors (Fe₂O₃/WO₃/Fe₂O₃ at pH 6) as an active film during solar light irradiation of a water sample, containing some surfactants (SDS), results in the simplification of the organic matter and gives no speciation change in the arsenic. The reproducibility of active layer is shown to be high and the surface roughness of each photoactive sample and photocurrent do not differ by more than 6 and less than 8%, respectively. The procedure of sample pretreatment caused a minimum (8-10%) amount of speciation change, whilst the irradiation is no longer that 2 h. The study indicates that "soft decomposition" can be performed for as long as 4 h, and still give photostable arsenates (III) and methylarsenate species. However, the saturation of the water sample with Ar is required (to reduce the oxygen content) for the longer the decomposition time being applied.

An enzyme-free electrochemical biosensor combining target recycling with Fe3O4/CeO2@Au nanocatalysts for microRNA-21 detection

In this study, an electrochemical biosensor was proposed for microRNA-21 detection based on Fe₃O₄/CeO₂ @Au magnetite nanoparticles (Fe₃O₄/CeO₂ @Au MNPs) as nanocatalyst and catalytic hairpin assembly (CHA) for signal application. Firstly, target microRNA-21 hybridized with hairpin H₂ to form H₂-T duplex stranded DNA (dsDNA), which could further open the hairpin H₁ for the formation of H₁-H₂ dsDNA. Simultaneously, the Fe₃O₄/CeO₂ @Au-S₁ not only hybridized with single stranded fragment of H₁-H₂ dsDNA with producing long dsDNA to absorb a large amount of electroactive substances of methylene blue (MB), but also acted as nanocatalyst to directly catalyze the reduction of MB for amplifying the electrochemical signal. Herein, compared with pure Fe₃O₄ nanoparticles, Fe₃O₄/CeO₂ @Au MNPs exhibited excellent catalytic performance since the cerium oxide (CeO₂) nanoparticles and Au nanoparticles can greatly improve the catalytic activity of Fe₃O₄ nanoparticles and effectively prevent the agglomeration of Fe₃O₄ nanoparticles. Owing to the signal amplification strategy, the proposed biosensor provided a wide linear range of 1 fM to 1 nM with a low detection limit of 0.33 fM (defined as S/N = 3) for microRNA-21 detection, and exhibited excellent specificity and sensitivity. This strategy provided a novel avenue for the detection of other biomarkers in electrochemical biosensors.

Integrated Methods to Manufacture Hydrogel Microparticles Containing Viral-Metal Nanocomplexes with High Catalytic Activity

Controlled synthesis of small and catalytically active noble metal nanoparticles under mild aqueous conditions is an unmet challenge. Genetically modified tobacco mosaic virus (TMV) can serve as a preferential precursor adsorption and growth sites for the controlled synthesis of palladium (Pd) nanoparticles with high catalytic activity. Here we describe detailed methods for the synthesis of Pd-TMV nanocomplexes as well as their integration into polymeric hydrogel microparticle platforms with controlled dimensions via a simple replica molding process. Such Pd-TMV-containing hydrogel particles may be useful in environmental remediation of toxic chemicals such as carcinogenic dichromate ions.

Layered vanadium(IV) disulfide nanosheets as a peroxidase-like nanozyme for colorimetric detection of glucose

The authors have discovered that vanadium disulfide (VS₂) nanosheets, synthesized by a hydrothermal method, exert stable peroxidase-like activity. The catalytic activity, with H₂O₂ as a cosubstrate, follows Michaelis-Menten kinetics and varies with temperature, pH value and H₂O₂ concentration. Two-dimensional VS₂ sheets acting as peroxidase (POx) mimics can replace horseradish peroxidase due to their availability, robustness, and reusability. The POx-like activity of VS₂ sheets was exploited to design a colorimetric glucose assay by using 3,3',5,5'-tetramethylbenzidine as a substrate and by working at an analytical wavelength of 652 nm. The assay covers the 5 to 250 μM glucose concentration range with a 1.5 μM detection limit. It was applied to the analysis of glucose in fruit juice. In our perception, the peroxidase-like nanozyme out of the family of transition metal dichalcogenides presented here has a wide scope in that it may stimulate promising biocatalytic applications in biotechnology and analytical chemistry. Graphical abstract Layered VS₂ nanosheets were prepared via hydrothermal synthesis and are shown to exert superior peroxidase-mimicking activity. Using these POx nano-mimics, a sensitive colorimetric assay for glucose was developed and applied to fruit juice analysis. This work unlocks the access of VS₂ to biocatalysis and bioassays.

Promoting catalytic ozonation of phenol over graphene through nitrogenation and Co3O4 compositing

Catalytic ozonation is progressively becoming an attractive technique for quick water purification but efficient and stable catalysts remains elusive. Here we solvothermally synthesized highly-dispersed Co₃O₄ nanocrystals over microscale nitrogen-doping graphene (NG) nanosheets and tested it as a synthetic catalyst in the ozonation of phenol in aqueous solutions. Transmission electron microscopy, powder X-ray diffraction, Fourier transform infrared spectra and X-ray photoelectron spectroscopy were used to determine its morphology, crystallinity, elemental composition and molecular bonds, respectively. The comparative experiments confirmed the highest catalytic activity and oxidation degree (AOSC) of Co₃O₄/NG among four nanocomposites (G, NG, Co₃O₄/G, and Co₃O₄/NG). Co₃O₄/NG also has exhibited the highest degradation rate: complete conversion of a near-saturated concentration of phenol (941.1mg/L) was achieved within 30min under ambient conditions with only a small dosage of Co₃O₄/NG (50mg/L) and ozone (4mg/L, flow rate: 0.5L/min). It also resulted in 34.6% chemical oxygen demand (COD_Cr) and 24.2% total organic carbon (TOC) reduction. In this work, graphene nanosheets not only functioned as a support for Co₃O₄ nanocrystals but also functioned as a co-catalyst for the enhancement in phenol removal efficiency. The surface nitridation and Co₃O₄ modification treatment further improved the removal rate of the phenol pollutants and brought in the higher oxidation degree. Our finding may open new perspectives for pursuing exceptional activity for catalytic ozonation reaction.

Nanoalloying and phase transformations during thermal treatment of physical mixtures of Pd and Cu nanoparticles

Nanoscale alloying and phase transformations in physical mixtures of Pd and Cu ultrafine nanoparticles are investigated in real time with in situ synchrotron-based x-ray diffraction complemented by ex situ high-resolution transmission electron microscopy. The combination of metal-support interaction and reactive/non-reactive environment was found to determine the thermal evolution and ultimate structure of this binary system. At 300 °C, the nanoparticles supported on silica and carbon black intermix to form a chemically ordered CsCl-type (B2) alloy phase. The B2 phase transforms into a disordered fcc alloy at higher temperature (> 450 °C). The alloy nanoparticles supported on silica and carbon black are homogeneous in volume, but evidence was found of Pd surface enrichment. In sharp contrast, when supported on alumina, the two metals segregated at 300 °C to produce almost pure fcc Cu and Pd phases. Upon further annealing of the mixture on alumina above 600 °C, the two metals interdiffused, forming two distinct disordered alloys of compositions 30% and 90% Pd. The annealing atmosphere also plays a major role in the structural evolution of these bimetallic nanoparticles. The nanoparticles annealed in forming gas are larger than the nanoparticles annealing in helium due to reduction of the surface oxides that promotes coalescence and sintering.

Preparation and characterization of three dimensional graphene foam supported platinum-ruthenium bimetallic nanocatalysts for hydrogen peroxide based electrochemical biosensors

The large surface, the excellent dispersion and the high degrees of sensitivity of bimetallic nanocatalysts were the attractive features of this investigation. Graphene foam (GF) was a three dimensional (3D) porous architecture consisting of extremely large surface and high conductive pathways. In this study, 3D GF was used incorporating platinum-ruthenium (PtRu) bimetallic nanoparticles as an electrochemical nanocatalyst for the detection of hydrogen peroxide (H2O2). PtRu/3D GF nanocatalyst exhibited a remarkable performance toward electrochemical oxidation of H2O2 without any additional mediator showing a high sensitivity (1023.1 µA mM(-1)cm(-2)) and a low detection limit (0.04 µM) for H2O2. Amperometric results demonstrated that GF provided a promising platform for the development of electrochemical sensors in biosensing and PtRu/3D GF nanocatalyst possessed the excellent catalytic activity toward the H2O2 detection. A small particle size and a high degree of the dispersion in obtaining of large active surface area were important for the nanocatalyst for the best H2O2 detection in biosensing. Moreover, potential interference by ascorbic acid and uric acid appeared to be negligible.