Polyaniline-based 3D network structure promotes entrapment and detection of drug-resistant bacteria

Sensitive and accurate capture, enrichment, and identification of drug-resistant bacteria on human skin are important for early-stage diagnosis and treatment of patients. Herein, we constructed a three-dimensional hierarchically structured polyaniline nanoweb (3D HPN) to capture, enrich, and detect drug-resistant bacteria on-site by rubbing infected skins. These unique hierarchical nanostructures enhance bacteria capture efficiency and help severely deform the surface of the bacteria entrapped on them. Therefore, 3D HPN significantly contributes to the effective and reliable recovery of drug-resistant bacteria from the infected skin and the prevention of potential secondary infection. The recovered bacteria were successfully identified by subsequent real-time polymerase chain reaction (PCR) analysis after the lysis process. The molecular analysis results based on a real-time PCR exhibit excellent sensitivity to detecting target bacteria of concentrations ranging from 102 to 107 CFU/mL without any fluorescent signal interruption. To confirm the field applicability of 3D HPN, it was tested with a drug-resistant model consisting of micropig skin similar to human skin and Klebsiella pneumoniae carbapenemase-producing carbapenem-resistant Enterobacteriaceae (KPC-CRE). The results show that the detection sensitivity of this assay is 102 CFU/mL. Therefore, 3D HPN can be extended to on-site pathogen detection systems, along with rapid molecular diagnostics through a simple method, to recover KPC-CRE from the skin.

Surface-enhanced Raman scattering with gold-coated silicon nanopillars arrays: The influence of size and spatial order

Nanopillars have been extensively explored as promising substrates for surface-enhanced Raman scattering (SERS) owing to their high sensitivity and excellent reproducibility. Most of the researches have been focused on the fabrication methods of nanopillars, and the dependences of SERS effects on geometrical size and spatial order are rarely investigated. In this work, SERS properties of nanopillars with different sizes (115-185 nm) and spatial orders (square and rhombus orders) have been studied. The work has shown that the nanopillars not only have high enhancement capability and high signal reproducibility, but also the enhancement is insensitive to the size and spatial orders. The measured enhancement factors (EFs) are 2.3-4.0 × 10⁶ and signal reproducibility (relative standard deviation, RSD) are ∼ 5.2%-6.9%, which are among the best of the similar SERS substrates reported. The variation of SERS intensity was as low as approximately 4.8% with the variation of pillar size from 115, 135, 145, to 160 nm. The insensitiveness and high reproducibility have been ascribed to the combined excitation of localized surface plasmon resonance (LSPR) and propagating surface plasmons (SPPs) of the nanopillars. Optical properties of the nanopillars are studied both experimentally and numerically to understand the physics behind the SERS performance.

A smartphone-based electroporation system with highly robust and low-voltage silicon nanopillar chips

In this work, a novel smartphone-based electroporation (EP) system integrated with 3D scalable and robust gold-coated silicon-nanopillar Electroporation (Au-Si NP-EP) chip using projection photolithography is developed, for the first time, for both EP and electric cell lysing (ECL) at low voltages. Au-SiNP-EP chip consists of silicon nanopillars fabricated by using ASML stepper, Deep Reactive Ion Etching (DRIE) process and coated with a gold microelectrode. The silicon nanopillars were optimized based on theoretical analysis and numerical simulations to enhance the electrical field intensity and mechanical strength. The fabricated Au-SiNP-EP chips are tested with both permeable (Acridine Orange (AO) and impermeable (Propidium Iodide (PI)) molecules for HeLa cells at different volts (1-8 V) and pulse duration (1-9 μs). The fabricated chip achieved an optimized EP efficiency of 84.3% and cell viability of 81.4% at a much smaller voltage (4.5V) than reported planar electroporation (PEP) devices (8-100V). Compared with nanostructures-based devices (2-20 V), our devices show both higher mechanical strength and fabrication yield. Besides, a smartphone app integrated with a low-cost open-source portable Arduino-based system is developed to provide optimized electrical protocols for both EP and ECL. The electric cell lysing with ECL efficiency of 97.0% at 7 V and pulse duration of 9 ms has been successfully demonstrated. The experimental results show that the proposed smartphone-based EP system with Au-SiNP EP chips is promising for various applications, including intracellular delivery of various biomolecules, drugs, and release of DNA/RNA molecules from biological cells.

Topographical nanostructures for physical sterilization

The development in nanobiotechnology provides an in-depth understanding of cell-surface interactions at the nanoscale level. Particularly, several surface features have shown the ability to interrogate the bacterial behavior and fate. In the past decade, the mechanical and physical sterilization has attracted considerable attention, as paradigms of such do not rely on chemical substances to damage or kill bacteria, whereas it is associated with natural living organisms or synthetic materials. Of note, such antibacterial scenario does not cause bacterial resistance, as the morphology of nanometer can directly cause bacterial death through physical and mechanical interactions. In this review, we provide an overview of recently developed technologies of leveraging topographical nanofeatures for physical sterilization. We mainly discuss the development of various morphologic nanostructures, and colloidal nanostructures show casing the capacity of "mechanical sterilization." Mechanically sterilized nanostructures can penetrate or cut through bacterial membranes. In addition, surface morphology, such as mechanical bactericidal nanoparticles and nanoneedles, can cause damage to the membrane of microorganisms, leading to cell lysis and death. Although the research in the field of mechanical sterilization is still in infancy, the effect of these nanostructure morphologies on sterilization has shown remarkable antibacterial potential, which could provide a new toolkit for anti-infection and antifouling applications. The mechanical and physical sterilization has attracted considerable attention, as paradigms of such do not rely on chemical substances to damage or kill bacteria. Moreover, such antibacterial scenario does not cause bacterial resistance, as the morphology of nanometer can directly cause bacterial death through physical and mechanical interactions. In this review, we focus on the advanced development of various morphologic nanostructures and colloidal nanostructures that show the capacity of "mechanical sterilization."

Biomimetic Nanopillar-Based Biosensor for Label-Free Detection of Influenza A Virus

Since the first emergence of influenza viruses, they have caused the flu seasonally worldwide. Precise detection of influenza viruses is required to prevent the spreading of the disease. Herein, we developed an optical biosensor using peptide-immobilized nanopillar structures for the label-free detection of influenza viruses. The spin-on-glass nanopillar structures were fabricated by nanoimprint lithography. A sialic acid-mimic peptide, which can specifically bind to hemagglutinin on the surface of the influenza virus, was immobilized onto the nanopillars via polymerized dopamine. The constructed nanopillar sensor enabled us to detect influenza A viruses in the range of 10³-10⁵ plaque-forming units through simple measurements of reflectance. Our findings suggest that biomimetic modification of nanopillar structures can be an alternative method for the immunodiagnosis of influenza viruses.

Stem cell behaviors on periodic arrays of nanopillars analyzed by high-resolution scanning electron microscope images

The biocompatible polyurethane acrylate (PUA) nanopillars were fabricated by soft lithography using three different sizes of nanobeads (350, 500, and 1000 nm), and the human adipose-derived stem cells (hASCs) were cultured on the nanopillars. The hASCs and their various behaviors, such as cytoplasmic projections, migration, and morphology, were observed by high resolution images using a scanning electron microscope (SEM). With the accurate analysis by SEM for the controlled sizes of nanopillars, the deflections are observed at pillars fabricated with 350- and 500-nm nanobeads. These high-resolution images could offer crucial information to elucidate the complicated correlations between nanopillars and the cells, such as morphology and cytoplasmic projections.

Nanotopographical regulation of pancreatic islet-like cluster formation from human pluripotent stem cells using a gradient-pattern chip

Bioengineering approaches to regulate stem cell fates aim to recapitulate the in vivo microenvironment. In recent years, manipulating the micro- and nano-scale topography of the stem cell niche has gained considerable interest for the purposes of controlling extrinsic mechanical cues to regulate stem cell fate and behavior in vitro. Here, we established an optimal nanotopographical system to improve 3-dimensional (3D) differentiation of pancreatic cells from human pluripotent stem cells (hPSCs) by testing gradient-pattern chips of nano-scale polystyrene surface structures with varying sizes and shapes. The optimal conditions for 3D differentiation of pancreatic cells were identified by assessing the expression of developmental regulators that are required for pancreatic islet development and maturation. Our results showed that the gradient chip of pore-part 2 (Po-2, 200-300 nm diameter) pattern was the most efficient setting to generate clusters of pancreatic endocrine progenitors (PDX1+ and NGN3+) compared to those of other pore diameters (Po-1, 100-200 or Po-3, 300-400 nm) tested across a range of pillar patterns and flat surfaces. Furthermore, the Po-2 gradient pattern-derived clusters generated islet-like 3D spheroids and tested positive for the zinc-chelating dye dithizone. The spheroids consisted of more than 30% CD200 + endocrine cells and also expressed NKX6.1 and NKX2.2. In addition, pancreatic β- cells expressing insulin and polyhormonal cells expressing both insulin and glucagon were obtained at the final stage of pancreatic differentiation. In conclusion, our data suggest that an optimal topographical structure for differentiation to specific cell types from hPSCs can be tested efficiently by using gradient-pattern chips designed with varying sizes and surfaces. STATEMENT OF SIGNIFICANCE: Our study provides demonstrates of using gradient nanopatterned chips for differentiation of pancreatic islet-like clusters. Gradient nanopatterned chips are consisted of two different shapes (nanopillar and nanopore) in three different ranges of nano sizes (100-200, 200-300, 300-400 nm). We found that optimal nanostructures for differentiation of pancreatic islet-like clusters were 200-300 nm nano pores. Cell transplantation is one of the major therapeutic option for type 1 diabetes mellitus (DM) using stem cell-derived β-like cells. We generated 50 um pancreatic islet-like clusters in size, which would be an optimal size for cell transplantation. Futuremore, the small clusters provide a powerful source for cell therapy. Our findings suggest gradient nanopatterned chip provides a powerful tool to generate specific functional cell types of a high purity for potential uses in cell therapy development.

High performance flexible pH sensor based on polyaniline nanopillar array electrode

Flexible pH sensor technologies have attracted a great deal of attention in many applications, such as, wearable health care devices and monitors for chemical and biological processes. Here, we fabricated flexible and thin pH sensors using a two electrode configuration comprised of a polyaniline nanopillar (PAN) array working electrode and an Ag/AgCl reference electrode. In order to provide nanostructure, soft lithography using a polymeric blend was employed to create a flexible nanopillar backbone film. Polyaniline-sensing materials were deposited on a patterned-nanopillar array by electrochemical deposition. The pH sensors produced exhibited a near-Nernstian response (∼60.3mV/pH), which was maintained in a bent state. In addition, pH sensors showed other excellent sensor performances in terms of response time, reversibility, repeatability, selectivity, and stability.

Axial diffusion barriers in near-infrared nanopillar LEDs

The growth of GaAs/GaAsP axial heterostructures is demonstrated and implemented as diffusion current barriers in nanopillar light-emitting diodes at near-infrared wavelengths. The nanopillar light-emitting diodes utilize an n-GaAs/i-InGaAs/p-GaAs axial heterostructure for current injection. Axial GaAsP segments are inserted into the n- and p-GaAs portions of the nanopillars surrounding the InGaAs emitter region, acting as diffusion barriers to provide enhanced carrier confinement. Detailed characterization of growth of the GaAsP inserts and electronic band-offset measurements are used to effectively implement the GaAsP inserts as diffusion barriers. The implementation of these barriers in nanopillar light-emitting diodes provides a 5-fold increase in output intensity, making this a promising approach to high-efficiency pillar-based emitters in the near-infrared wavelength range.

Modal engineering of second-harmonic generation in single GaP nanopillars

We report on modal dispersion engineering for second-harmonic generation (SHG) from single vertical GaP nanopillars/nanowaveguides, fabricated by a top-down approach, using optical modal overlap between the pump (830 nm) and SHG (415 nm). We present a modal analysis for the SHG process in GaP nanopillars and demonstrate efficient utilization of the longitudinal component of the nonlinear polarization density. Our SHG measurements show quantitatively the presented model. We experimentally demonstrate that polarization beam shaping and field distribution modification of the radiated SHG light, at nanometer scale, can be achieved by tuning the pillar diameter and linear pump polarization. SHG from single pillars can be used as femtosecond nanoscopic light sources at visible wavelengths applicable for single cell/molecular imaging and interesting for future integrated nanophotonics components. While this work focuses on GaP nanopillars, the results are applicable to other semiconductor nanowire materials and synthesis methods.

Cell responses to metallic nanostructure arrays with complex geometries

Metallic nanopillar/nanowires are emerging as promising platforms for biological applications, as they allow for the direct characterization and regulation of cell function. Herein we study the response of cells to a versatile nanopillar platform. Nanopillar arrays of various shape, size, and spacing and different nanopillar-substrate interfacial strengths were fabricated and interfaced with fibroblasts and several unique cell-nanopillar interactions were observed using high resolution scanning electron microscopy. Nanopillar penetration, engulfment, tilting, lift off and membrane thinning, were observed by manipulating nanopillar material, size, shape and spacing. These unique cell responses to various nanostructures can be employed for a wide range of applications including the design of highly sensitive nano-electrodes for single-cell probing.