Influence of salinity on heavy metal and oil removal from hypersaline oilfield-produced water by electrocoagulation: mechanistic insights

The focus of the present study was to explore how and to what extent ultrahigh salinity affects the adsorption of cadmium and hydrocarbon pollutants onto aluminum hydroxide adsorbents formed in an electrocoagulation process. The changes in the nature and structure of the electro-generated aluminum particles and the possible removal mechanisms due to high salt content were investigated by using FE-SEM/EDS, FTIR, BET, and XRD analyses. The pseudo-second order and Freundlich models proved to fit the data for cadmium adsorption onto the aluminum hydroxides best. It was demonstrated that the adsorption capacities were significantly affected by the high salinity. With the rise of the salinity from 2 to 170 g/L, the cadmium and COD removal yields dropped from 81 to 60% and from 90 to 72%. The increase of the oil content led to the enhanced cadmium adsorption capacity due to surface complexation and ion exchange mechanisms. It was proved that Lagergren pseudo-first-order kinetic model could justify COD abatement trends. FTIR spectra depicted that the negative impact of high salinities on the adsorption was due to causing the formation of less stable adsorbents. According to BET analysis, the occurrence of much wider pore size distribution and smaller specific surface area in high salinity case was the main reason for the decreased adsorption capacity. Based on XRD analysis, the higher crystallinity of the produced aluminum hydroxide particles and their consequential smaller surface areas resulted in the lower adsorption capacity in the hypersaline environment. It was concluded that adsorption via inner-sphere and outer-sphere complexation and sweep flocculation were the possible removal mechanisms. Total treatment cost of 8.75 and 3.49 €/m3 were estimated for low and ultrahigh salinity conditions.

Improved waste-sourced biocomposite for simultaneous removal of crude oil and heavy metals from synthetic and real oilfield-produced water

Oil- and gas-produced water (PW) which contains various pollutants is an enormous threat to the environment. In this study, a novel low-cost bio-adsorbent was prepared from shrimp shell and acid-activated montmorillonite. The results of FT-IR spectroscopy, energy dispersive X-ray (EDX) analysis, and SEM-EDX technique indicated that the chitosan-activated montmorillonite (CTS-A-MMT) was prepared successfully. The synthesized CTS-A-MMT was applied to remove simultaneously five cationic and anionic metal species and crude oil from synthetic and real oilfield PW. The adsorption data indicated that crude oil and all studied metals (except As) were adsorbed to CTS-A-MMT in a monolayer model (best fitted by Langmuir model), while As adsorption fits well with Freundlich model. Kinetic models' evaluation demonstrated that the adsorption kinetics of metals on CTS-A-MMT are initially controlled by the chemical reaction (film diffusion) followed by intra-particle diffusion. Application of the prepared CTS-A-MMT in real oilfield PW indicated removal efficiency of 65 to 93% for metals and 87% for crude oil in simultaneous removal experiments. Presence of additional ions in PW decreased the removal of studied metals and crude oil considerably; however, the concentration of the investigated pollutants in treated PW is less than the ocean discharge criteria. It is concluded that the prepared CTS-A-MMT composite is a low-cost and effective adsorbent for treating wastewater contaminated with crude oil and heavy metals (i.e., PW).

Greenhouse gas emissions from oilfield-produced water in Shengli Oilfield, Eastern China

Greenhouse gas (GHG) emissions from oil and gas systems are an important component of the GHG emission inventory. To assess the carbon emissions from oilfield-produced water under atmospheric conditions correctly, in situ detection and simulation experiments were developed to study the natural release of GHG into the atmosphere in the Shengli Oilfield, the second largest oilfield in China. The results showed that methane (CH4) and carbon dioxide (CO2) were the primary gases released naturally from the oilfield-produced water. The atmospheric temperature and release time played important roles in determining the CH4 and CO2 emissions under atmospheric conditions. Higher temperatures enhanced the carbon emissions. The emissions of both CH4 and CO2 from oilfield-produced water were highest at 27°C and lowest at 3°C. The bulk of CH4 and CO2 was released from the oilfield-produced water during the first release period, 0-2hr, for each temperature, with a maximum average emission rate of 0.415gCH4/(m(3)·hr) and 3.934gCO2/(m(3)·hr), respectively. Then the carbon emissions at other time periods gradually decreased with the extension of time. The higher solubility of CO2 in water than CH4 results in a higher emission rate of CH4 than CO2 over the same release duration. The simulation proved that oilfield-produced water is one of the potential emission sources that should be given great attention in oil and gas systems.

Effects of untreated and treated oilfield-produced water on seed germination, seedling development, and biomass production of sunflower (Helianthus annuus L.)

This study aims to evaluate possible toxic effects of oil and other contaminants from oilfield-produced water from oil exploration and production, on seed germination, and seedling development of sunflower (Helianthus annuus L.). In comparison, as treated by electroflocculation, oilfield-produced water, with lower oil and organic matter content, was also used. Electroflocculation treatment of oilfield-produced water achieved significant removals of chemical oxygen demand (COD) (94 %), oil and grease (O&G) (96 %), color (97 %), and turbidity (99 %). Different O&G, COD, and salt levels of untreated and treated oilfield-produced water did not influence germination process and seedling biomass production. Normal seedlings percentage and vigor tended to decrease more intensely in O&G and COD levels, higher than 337.5 mg L(-1) and 1321 mg O2 L(-1), respectively, using untreated oilfield-produced water. These results indicate that this industrial effluent must be treated, in order to not affect adversely seedling development. This way, electroflocculation treatment appears as an interesting alternative to removing oil and soluble organic matter in excess from oilfield-produced water improving sunflower's seedling development and providing a friendly environmental destination for this wastewater, reducing its potential to harm water resources, soil, and biota.