Laser-assisted synthesis of nano-hydroxyapatite and functionalization with bone active molecules for bone regeneration

The main goal of bone tissue engineering research is to replace the allogenic and autologous bone graft substitutes that can promote bone repair. Owing to excellent biocompatibility and osteoconductivity, hydroxyapatite is in extensive research and high demand for both medical and non-medical applications. Although various methods have been developed for the synthesis of hydroxyapatite, in the present study we have shown the use of nanosecond laser energy in the wet precipitation method of nano-hydroxyapatite (nHAP) synthesis without using ammonium solution or any other chemicals for pH maintenance. Here, the present study aimed to fabricate the nanohydroxyapatite using a nanosecond laser. The X-ray diffraction and Fourier transform infrared spectroscopy have confirmed the hydroxyapatite formation under laser irradiation in less time without aging. A transmission electron microscopy confirmed the nano size of synthesized nHAP, which is comparable to conventional nHAP. The length and width of the laser-assisted nHAP were found to be in the range of 50-200 nm and 15-20 nm, respectively, at various laser parameters. The crystallite size obtained by Debye Scherrer formulae was found to be in the range of ∼ 16-36 nm. In addition, laser-assisted nHAP based composite cryogel (nanohydroxyapatite/gelatin/collagen I) was synthesized and impregnated with bioactive molecules (bone morphogenic protein and zoledronic acid) that demonstrated significant osteogenic potential both in vitro in cell experiment and in vivo rat muscle pouch model (abdomen and tibia muscles). Dual-energy X-ray analysis, micro-CT, and histological analysis confirmed ectopic bone regeneration. Micro-CT based histomorphometry showed a higher amount (more than 10-fold) of mineralization for animal groups implanted with composite cryogels loaded with bioactive molecules compared to only composite cryogels groups. Our findings thus demonstrate a controlled and rapid synthetic method for the synthesis of nHAP with various physical, chemical, and biological properties exhibited as comparable to conventionally synthesized nHAP.

Preparation and characterization of starch-based nanocomposites reinforced by graphene oxide self-assembled on the surface of silanecouplingagent modified cellulose nanocrystals

The dispersion of cellulose nanocrystal (CNC) in starch matrix limited its application. In this study, CNC modified by silanecouplingagent before graphene oxide (GO) self-assembled on the surface of modified CNC, then CNC-GO as a filler was used to prepare starch-based nanocomposite films (CS/CNC-GO). The structure of CNC-GO and CS/CNC-GO films and the properties of CS/CNC-GO films were studied by FT-IR, Raman, SEM, surface potential, UV-Vis, moisture absorption and tensile tests. The results showed that GO was successfully self-assembled on the surface of CNC modified by silanecouplingagent. CNC-GO was superior to CNC in reinforcing the strength of starch film, improving the transmittance of starch film and decreasing moisture rate of starch film. Tensile strength, elongation at break and transmittance of CS/CNC-GO film with 5 wt% CNC-GO reached maximum, which was 53.96 MPa, 3.72% and 38.76%, respectively. Moisture rate of CS/CNC-GO film with 3 wt% CNC-GO reached minimum that was 12.13%. These were assigned to the more uniform dispersion of CNC-GO in the starch matrix and the stronger interfacial interaction between starch and CNC-GO.

Rapid ultrasound-induced transient-liquid-phase bonding of Al-50Si alloys with Zn interlayer in air for electrical packaging application

Al-50Si alloys were joined by rapid ultrasound-induced transient-liquid-phase bonding method using Zn foil as interlayer at 390°C in air, below the melt point of interlayer. The fracture of oxide films along the edge of Si particles led to contact and inter-diffusion between aluminum substrate and Zn interlayer, and liquefied Zn-Al alloys were developed. The width of Zn-Al alloys gradually decreased with increasing the ultrasonic vibration time due to liquid squeezing out and accelerated diffusion. A stage of isothermal solidification existed, and the completion time was significantly shortened. In the liquid metal, the acoustic streaming and ultrasonic cavitations were induced. As the process developed, much more Si particles, which were particulate-reinforced phases of Al-50Si, gradually migrated to the center of soldering seam. The highest average shear strength of joints reached to 94.2MPa, and the fracture mainly occurred at the base metal.