Preparation and application of sulfated lily polysaccharide bridged polyhedral oligomeric silsesquioxane hybrid organosilicas as stationary phase

Periodic mesoporous organosilicas (PMO) hydrophilic microspheres were synthesized by co-condensation of sulfated polysaccharide from Lilum lancifolium Thunb. bridged silane (SLLTPBS) and polyhedral oligomeric silsesquioxane (POSS) as stationary phase (PMO(SLLTP-POSS)) for per aqueous liquid chromatography (PALC), which would overcome the disadvantages of using a large amount of acetonitrile on the hydrophilic interaction liquid chromatography (HILIC) columns. Average particle size of PMO (SLLTP-POSS) microspheres was 4.9 μm, which was suitable for stationary phase. The retention mechanism of the stationary phase in PALC was mainly hydrophobic interactions and also included some ion-exchange interactions and electrostatic interactions. The acid-base resistance was greatly improved compared to the C18 column. The PMO(SLLTP-POSS) column under PALC mode had increased the resolution when separating some hydrophilic compounds such as eight organic acids and eleven sweeteners compared with the C18 column and HILIC column. The new column was more efficient than the HILIC columns. Additionally, a PALC-triple quadrupole mass spectrometry approach for the simultaneous identification of the eleven sweeteners was developed. The averagere coveries of the eleven compounds were 70.20%-91.33% with the relative standard deviation (RSD) range of 1.74% to 4.27%. The results showed good precision and accuracy of the method.

Seminaphthorhodafluor Derivatives Bridged Periodic Mesoporous Organosilicas for Detection of Cu(2)

Seminaphthorhodafluor (SNARF) Schiff base (SNARF-SB) bridged periodic mesoporous organosilicas (SSPMOs) with "turn-on" fluorescence enhancement for sensing Cu²⁺ were synthesized via a template-directed co-condensation method. Small-angle x-ray scattering (SAXS) patterns, high resolution transmission electron microscope (HRTEM) images, and N₂ adsorption-desorption isotherms indicated the presence of mesoporous structure in the SSPMOs. FT-IR spectra and ²⁹Si MAS NMR data confirmed the successful incorporation of bridged organic groups in the framework of SSPMOs. The luminous properties that SSPMOs had a selective response to Cu²⁺ were investigated by UV-Vis absorption spectroscopy and fluorescence spectroscopy. The limit of detection (LOD) was 5.1 × 10^-7 M and binding stoichiometry was determined 1:1 between SNARF-SB and Cu²⁺. The fluorescence enhancement of SSPMOs towards Cu²⁺ was induced by ring-opening of the spirolactam in SNARF-SB in framework of SSPMOs, which was confirmed by FT-IR spectra of SNARF-SB with Cu²⁺. Moreover, SSPMOs have improved fluorescence lifetimes compared with that of SNARF-SB. Therefore, SSPMOs can be a progressive chemical sensor for Cu²⁺ due to its high selectivity, recyclability, and stability.

A new ionic liquid bridged periodic mesoporous organosilicas stationary phase for per aqueous liquid chromatography and its application in the detection of biogenic amines

In order to solve the problems of using a large proportion of acetonitrile on the hydrophilic interaction liquid chromatography (HILIC) columns that was not environmentally friendly, and the poor acid and base resistance of traditional bonded silica columns, we reported a novel stationary phase of Au nanoparticles (Au NPs) covalently bonded to ionic liquid (ILs) bridged periodic mesoporous organosilicas (PMO) hydrophilic microspheres (PMO-ILs-Au NPs) for per aqueous liquid chromatography (PALC). The PMO hydrophilic microspheres were prepared by condensation of 1,3-bis(trimethoxysilylpropyl)imidazoliumchloride and 1, 2-Bis (triethoxysilyl) ethane and then modified with Au NPs the surface. The obtained materials were characterized by elemental analysis, FT-IR spectra, scanning electron microscope and transmission electron microscopy. The retention behavior was evaluated by investigating the effect of various chromatographic factors on the retention of different types of solutes. The retention mechanism of the stationary phases in PALC was a mixed type of anion-exchange and hydrophobic interaction. Compared with C₁₈-SiO₂ column, the acid and base resistance of the stationary phase were greatly improved. Compared with the HILIC column and C₁₈ column, some hydrophilic compounds such as six organic acids and eight biogenic amines were baseline separated with the enhanced resolution of the PMO-ILs-Au NPs column under the PALC mode. The efficiency of the new column was significantly higher than that of the HILIC column. Furthermore, the analysis of PALC-triple quadrupole mass spectrometry was developed for simultaneous detection of eight biogenic amines. This method could improve detection efficiency, save reagent and reduce environmental pollution. PALC as a green chromatography analytical method was suitable for the replacement of HILIC.

Thiol-ethylene bridged PMO: A high capacity regenerable mercury adsorbent via intrapore mercury thiolate crystal formation

Highly ordered thiol-ethylene bridged Periodic Mesoporous Organosilicas were synthesized directly from a homemade thiol-functionalized bis-silane precursor. These high surface area materials contain up to 4.3mmol/g sulfur functions in the walls and can adsorb up to 1183mg/g mercury ions. Raman spectroscopy reveals the existence of thiol and disulfide moieties. These groups have been evaluated by a combination of Raman spectroscopy, Ellman's reagent and elemental analysis. The adsorption of mercury ions was evidenced by different techniques, including Raman, XPS and porosimetry, which indicate that thiol groups are highly accessible to mercury. Scanning transmission electron microscopy combined with EDX showed an even homogenous distribution of the sulfur atoms throughout the structure, and have revealed for the first time that a fraction of the adsorbed mercury is forming thiolate nanocrystals in the pores. The adsorbent is highly selective for mercury and can be regenerated and reused multiple times, maintaining its structure and functionalities and showing only a marginal loss of adsorption capacity after several runs.

Synthesis of highly phosphonic acid functionalized benzene-bridged periodic mesoporous organosilicas for use as efficient dye adsorbents

Periodic mesoporous organosilicas (PMOs) with benzene bridging groups in the silica wall were functionalized with a tunable content of phosphonic acid groups. These bifunctional materials were synthesized by co-condensation of two different organosilane precursors, that is, 1,4-bis(triethoxysilyl)benzene (BTEB) and sodium 3-(trihydroxysilyl)propyl methyl phosphate (SPMP), under acidic conditions using nonionic surfactant Brij-S10 as template. The materials exhibited well-ordered mesostructures and were characterized by X-ray diffraction, nitrogen sorption, TEM, TGA, FTIR, and solid-state NMR measurements. The materials thus obtained were employed as adsorbents to remove different types of dyes, for example, cationic dyes methylene blue and phenosafranine, anionic orange II, and amphoteric rhodamine B, from aqueous solutions. The materials exhibited a remarkably high adsorption capacity than activated carbon due to their ordered mesostructures, a large number of phosphonic acid groups, and high surface areas. The adsorption was mainly governed by electrostatic interaction, but also involved π-π stacking interaction as well as hydrogen bonding. The adsorption kinetics can be better fitted by the pseudo-second order model. The adsorption process was controlled by the mechanisms of external mass transfer and intraparticle diffusion. The materials retained more than 97% dye removal efficiency after use for five consecutive cycles.

Rapid sonochemical synthesis of MCM-41 type benzene-bridged periodic mesoporous organosilicas

Benzene-bridged periodic mesoporous organosilicas (PMOs) with the MCM-41 were synthesized by a rapid sonochemical process via co-condensation of tetraethoxysilane (TEOS) and 1,4-bis(triethoxysilyl) benzene (BTEB) under basic conditions within a few minutes using cetyltrimethylammoniumbromide (CTMABr) as a structure-directing agent. The molar ratio of the silicon precursors and the synthesis time were varied in order to investigate their influence on the structural ordering of the materials. The characteristics of the materials were evaluated by X-ray diffraction (XRD), N2-sorption, transmission electron microscopy (TEM) and solid-state NMR spectroscopy. The resultant materials exhibited well-ordered hexagonal mesostructures with surface areas in the range of 602-1237 m(2)/g, pore volumes of 0.37-0.68 cm(3)/g, and pore diameters in the range of 2.5-3.5 nm. Two dimensional (29)Si{(1)H} heteronuclear correlation (HETCOR) NMR spectra confirmed the formation of a single mesophase with various Q (from TEOS) and T (from BTEB) silicon species located randomly within the pore walls due to the co-condensation of BTEB and TEOS, which excluded the possibility of formation of island or two separate phases within such a short synthesis time. The prime advantage of the present synthesis route is that it can effectively reduce the total synthesis time from days to a few minutes, much shorter than the conventional benzene-bridged PMOs synthesis methods.

Simple systematic synthesis of periodic mesoporous organosilica nanoparticles with adjustable aspect ratios

One-dimensional periodic mesoporous organosilica (PMO) nanoparticles with tunable aspect ratios are obtained from a chain-type molecular precursor octaethoxy-1,3,5-trisilapentane. The aspect ratio can be tuned from 2:1 to >20:1 simply by variation in the precursor concentration in acidic aqueous solutions containing constant amounts of triblock copolymer Pluronic P123. The mesochannels are highly ordered and are oriented parallel to the longitudinal axis of the PMO particles. No significant Si-C bond cleavage occurs during the synthesis according to29Si MAS NMR. The materials exhibit surface areas between 181 and 936 m2 g-1.