Structural insights into catalytic promiscuity of chalcone synthase from Glycine max (L.) Merr.: Coenzyme A-induced alteration of product specificity

Catalytic promiscuity of enzymes plays a pivotal role in driving the evolution of plant specialized metabolism. Chalcone synthase (CHS) catalyzes the production of 2',4,4',6'-tetrahydroxychalcone (THC), a common precursor of plant flavonoids, from p-coumaroyl-coenzyme A (-CoA) and three malonyl-CoA molecules. CHS has promiscuous product specificity, producing a significant amount of p-coumaroyltriacetic lactone (CTAL) in vitro. However, mechanistic aspects of this CHS promiscuity remain to be clarified. Here, we show that the product specificity of soybean CHS (GmCHS1) is altered by CoA, a reaction product, which selectively inhibits THC production (IC50, 67 μM) and enhances CTAL production. We determined the structure of a ternary GmCHS1/CoA/naringenin complex, in which CoA is bound to the CoA-binding tunnel via interactions with Lys55, Arg58, and Lys268. Replacement of these residues by alanine resulted in an enhanced THC/CTAL production ratio, suggesting the role of these residues in the CoA-mediated alteration of product specificity. In the ternary complex, a mobile loop ("the K-loop"), which contains Lys268, was in a "closed conformation" placing over the CoA-binding tunnel, whereas in the apo and binary complex structures, the K-loop was in an "open conformation" and remote from the tunnel. We propose that the production of THC involves a transition of the K-loop conformation between the open and closed states, whereas synthesis of CTAL is independent of it. In the presence of CoA, an enzyme conformer with the closed K-loop conformation becomes increasingly dominant, hampering the transition of K-loop conformations to result in decreased THC production and increased CTAL production.

Directionally modulating the product chain length of an inulosucrase by semi-rational engineering for efficient production of 1-kestose

Microbial inulosucrase as a transfructosylation tool has been used to produce inulin and inulin-type fructooligosaccharides with various polymerization degrees. Tailor-made oligosaccharides could be generated by inulosucrase via chain length modulation. In this study, a semi-rational design based on the modeled structure of Lactobacillus reuteri 121 inulosucrase was carried out to screen and construct variants. The residues Arg541 and Arg544 were determined to be significant to the product chain elongation of L. reuteri 121 inulosucrase. The variant R544W altered the product specificity of inulosucrase and produced short-chain fructooligosaccharides with 1-kestose as the main component. Molecular dynamic simulations verified an increased binding free energy of variant R544W with 1-kestose than the wild-type enzyme with 1-kestose. After optimization, 1-kestose and total short-chain fructooligosaccharides production reached approximately 206 g/L and 307 g/L, respectively. This study suggests the great potential of variant R544W in the biotransformation from sucrose to functional sugar.

Plasticity engineering of plant monoterpene synthases and application for microbial production of monoterpenoids

Plant monoterpenoids with structural diversities have extensive applications in food, cosmetics, pharmaceuticals, and biofuels. Due to the strong dependence on the geographical locations and seasonal annual growth of plants, agricultural production for monoterpenoids is less effective. Chemical synthesis is also uneconomic because of its high cost and pollution. Recently, emerging synthetic biology enables engineered microbes to possess great potential for the production of plant monoterpenoids. Both acyclic and cyclic monoterpenoids have been synthesized from fermentative sugars through heterologously reconstructing monoterpenoid biosynthetic pathways in microbes. Acting as catalytic templates, plant monoterpene synthases (MTPSs) take elaborate control of the monoterpenoids production. Most plant MTPSs have broad substrate or product properties, and show functional plasticity. Thus, the substrate selectivity, product outcomes, or enzymatic activities can be achieved by the active site mutations and domain swapping of plant MTPSs. This makes plasticity engineering a promising way to engineer MTPSs for efficient production of natural and non-natural monoterpenoids in microbial cell factories. Here, this review summarizes the key advances in plasticity engineering of plant MTPSs, including the fundamental aspects of functional plasticity, the utilization of natural and non-natural substrates, and the outcomes from product isomers to complexity-divergent monoterpenoids. Furthermore, the applications of plasticity engineering for improving monoterpenoids production in microbes are addressed.

Dynamic coupling analysis on plant sesquiterpene synthases provides leads for the identification of product specificity determinants

Sesquiterpene synthases catalyse cyclisation of farnesyl pyrophosphate to produce diverse sesquiterpenes. Despite utilising the same substrate and exhibiting significant sequence and structural homology, these enzymes form different products. Previous efforts were based on identifying the effect of divergent residues present at the catalytic binding pocket on the product specificity of these enzymes. However, the rationales deduced for the product specificity from these studies were not generic enough to be applicable to other phylogenetically distant members of this family. To address this problem, we have developed a novel approach combining sequence, structural and dynamical information of plant sesquiterpene synthases (SSQs) to predict product modulating residues (PMRs). We tested this approach on the SSQs with known PMRs and also on sesquisabinene synthase 1 (SaSQS1), a SSQ from Indian sandalwood. Our results show that the dynamical sectors of SSQs obtained from molecular dynamics simulation and their hydrophobicity and vicinity indices together provide leads for the identification of PMRs. The efficacy of the technique was tested on SaSQS1 using mutagenesis. To the best of our knowledge, this is a first technique of this kind which provides cues on PMRs of SSQs, with divergent phylogenetic relationship.

Structure of maltotetraose-forming amylase from Pseudomonas saccharophila STB07 provides insights into its product specificity

The maltooligosaccharide-forming amylases (MFAses) degrade starch into maltooligosaccharides which potentially benefit human diet and grow popular in food processing, but little has been studied about their product specificity and structures. We focused on this topic and provide evidence through an X-ray crystal structure of the maltotetraose (G4)-forming amylase from Pseudomonas saccharophila STB07 (MFA_ps), as well as co-crystal structures of MFA_ps with G4 and with pseudo-maltoheptaose (pseudo-G7) determined at up to 1.1 Å resolution. G4 and pseudo-G7 occupy active cleft subsites -4 to -1 and -4 to +3 respectively. Binding induces conformational changes in the active sites except Asp193, working as the base catalyst. Comparison of the MFA_ps structure with those of other α-amylases revealed obvious differences in the loop structures providing dominant interactions between protein and substrate in the non-reducing side of the active sites cleft. These structures at the non-reducing end may govern the G4 specificity of MFA_ps and also be relevant to its exo-type action pattern.

Protein arginine methyltransferases: insights into the enzyme structure and mechanism at the atomic level

Protein arginine methyltransferases (PRMTs) catalyze the methyl transfer to the arginine residues of protein substrates and are classified into three major types based on the final form of the methylated arginine. Recent studies have shown a strong correlation between PRMT expression level and the prognosis of cancer patients. Currently, crystal structures of eight PRMT members have been determined. Kinetic and structural studies have shown that all PRMTs share similar, but unique catalytic and substrate recognition mechanism. In this review, we discuss the structural similarities and differences of different PRMT members, focusing on their overall structure, S-adenosyl-L-methionine-binding pocket, substrate arginine recognition and catalytic mechanisms. Since PRMTs are valuable targets for drug discovery, we also rationally classify the known PRMT inhibitors into five classes and discuss their mechanisms of action at the atomic level.

An analysis of characterized plant sesquiterpene synthases

Plants exhibit a vast array of sesquiterpenes, C15 hydrocarbons which often function as herbivore-repellents or pollinator-attractants. These in turn are produced by a diverse range of sesquiterpene synthases. A comprehensive analysis of these enzymes in terms of product specificity has been hampered by the lack of a centralized resource of sufficient functionally annotated sequence data. To address this, we have gathered 262 plant sesquiterpene synthase sequences with experimentally characterized products. The annotated enzyme sequences allowed for an analysis of terpene synthase motifs, leading to the extension of one motif and recognition of a variant of another. In addition, putative terpene synthase sequences were obtained from various resources and compared with the annotated sesquiterpene synthases. This analysis indicated regions of terpene synthase sequence space which so far are unexplored experimentally. Finally, we present a case describing mutational studies on residues altering product specificity, for which we analyzed conservation in our database. This demonstrates an application of our database in choosing likely-functional residues for mutagenesis studies aimed at understanding or changing sesquiterpene synthase product specificity.

The hemicellulose-degrading enzyme system of the thermophilic bacterium Clostridium stercorarium: comparative characterisation and addition of new hemicellulolytic glycoside hydrolases

BACKGROUND

The bioconversion of lignocellulosic biomass in various industrial processes, such as the production of biofuels, requires the degradation of hemicellulose. Clostridium stercorarium is a thermophilic bacterium, well known for its outstanding hemicellulose-degrading capability. Its genome comprises about 50 genes for partially still uncharacterised thermostable hemicellulolytic enzymes. These are promising candidates for industrial applications.

RESULTS

To reveal the hemicellulose-degrading potential of 50 glycoside hydrolases, they were recombinantly produced and characterised. 46 of them were identified in the secretome of C. stercorarium cultivated on cellobiose. Xylanases Xyn11A, Xyn10B, Xyn10C, and cellulase Cel9Z were among the most abundant proteins. The secretome of C. stercorarium was active on xylan, β-glucan, xyloglucan, galactan, and glucomannan. In addition, the recombinant enzymes hydrolysed arabinan, mannan, and galactomannan. 20 enzymes are newly described, degrading xylan, galactan, arabinan, mannan, and aryl-glycosides of β-d-xylose, β-d-glucose, β-d-galactose, α-l-arabinofuranose, α-l-rhamnose, β-d-glucuronic acid, and N-acetyl-β-d-glucosamine. The activities of three enzymes with non-classified glycoside hydrolase (GH) family modules were determined. Xylanase Xyn105F and β-d-xylosidase Bxl31D showed activities not described so far for their GH families. 11 of the 13 polysaccharide-degrading enzymes were most active at pH 5.0 to pH 6.5 and at temperatures of 57-76 °C. Investigation of the substrate and product specificity of arabinoxylan-degrading enzymes revealed that only the GH10 xylanases were able to degrade arabinoxylooligosaccharides. While Xyn10C was inhibited by α-(1,2)-arabinosylations, Xyn10D showed a degradation pattern different to Xyn10B and Xyn10C. Xyn11A released longer degradation products than Xyn10B. Both tested arabinose-releasing enzymes, Arf51B and Axh43A, were able to hydrolyse single- as well as double-arabinosylated xylooligosaccharides.

CONCLUSIONS

The obtained results lead to a better understanding of the hemicellulose-degrading capacity of C. stercorarium and its involved enzyme systems. Despite similar average activities measured by depolymerisation tests, a closer look revealed distinctive differences in the activities and specificities within an enzyme class. This may lead to synergistic effects and influence the enzyme choice for biotechnological applications. The newly characterised glycoside hydrolases can now serve as components of an enzyme platform for industrial applications in order to reconstitute synthetic enzyme systems for complete and optimised degradation of defined polysaccharides and hemicellulose.

Cell foundry with high product specificity and catalytic activity for 21-deoxycortisol biotransformation

Background

21-deoxycortisol (21-DF) is the key intermediate to manufacture pharmaceutical glucocorticoids. Recently, a Japan patent has realized 21-DF production via biotransformation of 17-hydroxyprogesterone (17-OHP) by purified steroid 11β-hydroxylase CYP11B1. Due to the less costs on enzyme isolation, purification and stabilization as well as cofactors supply, whole-cell should be preferentially employed as the biocatalyst over purified enzymes. No reports as so far have demonstrated a whole-cell system to produce 21-DF. Therefore, this study aimed to establish a whole-cell biocatalyst to achieve 21-DF transformation with high catalytic activity and product specificity.

Results

In this study, Escherichia coli MG1655(DE3), which exhibited the highest substrate transportation rate among other tested chassises, was employed as the host cell to construct our biocatalyst by co-expressing heterologous CYP11B1 together with bovine adrenodoxin and adrenodoxin reductase. Through screening CYP11B1s (with mutagenesis at N-terminus) from nine sources, Homo sapiens CYP11B1 mutant (G25R/G46R/L52 M) achieved the highest 21-DF transformation rate at 10.6 mg/L/h. Furthermore, an optimal substrate concentration of 2.4 g/L and a corresponding transformation rate of 16.2 mg/L/h were obtained by screening substrate concentrations. To be noted, based on structural analysis of the enzyme-substrate complex, two types of site-directed mutations were designed to adjust the relative position between the catalytic active site heme and the substrate. Accordingly, 1.96-fold enhancement on 21-DF transformation rate (to 47.9 mg/L/h) and 2.78-fold improvement on product/by-product ratio (from 0.36 to 1.36) were achieved by the combined mutagenesis of F381A/L382S/I488L. Eventually, after 38-h biotransformation in shake-flask, the production of 21-DF reached to 1.42 g/L with a yield of 52.7%, which is the highest 21-DF production as known.

Conclusions

Heterologous CYP11B1 was manipulated to construct E. coli biocatalyst converting 17-OHP to 21-DF. Through the strategies in terms of (1) screening enzymes (with N-terminal mutagenesis) sources, (2) optimizing substrate concentration, and most importantly (3) rational design novel mutants aided by structural analysis, the 21-DF transformation rate was stepwise improved by 19.5-fold along with 4.67-fold increase on the product/byproduct ratio. Eventually, the highest 21-DF reported production was achieved in shake-flask after 38-h biotransformation. This study highlighted above described methods to obtain a high efficient and specific biocatalyst for the desired biotransformation.

Electronic supplementary material

The online version of this article (doi:10.1186/s12934-017-0720-y) contains supplementary material, which is available to authorized users.

Characterization of the arabinoxylan-degrading machinery of the thermophilic bacterium Herbinix hemicellulosilytica-Six new xylanases, three arabinofuranosidases and one xylosidase

Herbinix hemicellulosilytica is a newly isolated, gram-positive, anaerobic bacterium with extensive hemicellulose-degrading capabilities obtained from a thermophilic biogas reactor. In order to exploit its potential as a source for new industrial arabinoxylan-degrading enzymes, six new thermophilic xylanases, four from glycoside hydrolase family 10 (GH10) and two from GH11, three arabinofuranosidases (1x GH43, 2x GH51) and one β-xylosidase (GH43) were selected. The recombinantly produced enzymes were purified and characterized. All enzymes were active on different xylan-based polysaccharides and most of them showed temperature-vs-activity profiles with maxima around 55-65°C. HPAEC-PAD analysis of the hydrolysates of wheat arabinoxylan and of various purified xylooligosaccharides (XOS) and arabinoxylooligosaccharides (AXOS) was used to investigate their substrate and product specificities: among the GH10 xylanases, XynB showed a different product pattern when hydrolysing AXOS compared to XynA, XynC, and XynD. None of the GH11 xylanases was able to degrade any of the tested AXOS. All three arabinofuranosidases, ArfA, ArfB and ArfC, were classified as type AXH-m,d enzymes. None of the arabinofuranosidases was able to degrade the double-arabinosylated xylooligosaccharides XA²⁺³XX. β-Xylosidase XylA (GH43) was able to degrade unsubstituted XOS, but showed limited activity to degrade AXOS.

QM/MM MD and Free Energy Simulation Study of Methyl Transfer Processes Catalyzed by PKMTs and PRMTs

Methyl transfer processes catalyzed by protein lysine methyltransferases (PKMTs) and protein arginine methyltransferases (PRMTs) control important biological events including transcriptional regulation and cell signaling. One important property of these enzymes is that different PKMTs and PRMTs catalyze the formation of different methylated product (product specificity). These different methylation states lead to different biological outcomes. Here, we review the results of quantum mechanics/molecular mechanics molecular dynamics and free energy simulations that have been performed to study the reaction mechanism of PKMTs and PRMTs and the mechanism underlying the product specificity of the methyl transfer processes.

Mutations enhance β-cyclodextrin specificity of cyclodextrin glycosyltransferase from Bacillus circulans

The effects of amino acid residue at position 31 in the neighborhood of calcium binding site I (CaI) on product specificity of cyclodextrin glycosyltransferase (EC 2.4.1.19, CGTase) were investigated by replacing Ala31 in the CGTase from Bacillus circulans STB01 with arginine, proline, threonine, serine and glycine. The results showed that the mutations A31R, A31P, and A31T resulted in the increases in β-cyclodextrin-forming activity and β-cyclodextrin production, indicating that these mutations enhanced β-cyclodextrin specificity of the CGTase. Especially the mutant A31R displayed approximately 26% increase in β-cyclodextrin production with a concomitant 41% decrease in α-cyclodextrin production when compared to the wild-type CGTase. Thus, it was much more suitable for the industrial production of β-cyclodextrin than the wild-type enzyme. The enhanced β-cyclodextrin specificity of the mutants might be a result of stabilizing CaI, which also suggested that CaI might play an important role in cyclodextrin product specificity of CGTase.

Site-saturation mutagenesis of central tyrosine 195 leading to diverse product specificities of an α-cyclodextrin glycosyltransferase from Paenibacillus sp. 602-1

Central tyrosine 195 plays an important role in the active site of cyclodextrin glycosyltransferase (CGTase) that is highly conservative among various CGTases. However, a detailed functional understanding of this subsite is lacking. In this study, we applied site-directed saturation mutagenesis to investigate the effect of tyrosine 195 on the hydrolytic activity and cyclization specificity of an α-CGTase. A total of 17 mutant CGTases were obtained and heterologously expressed in E. coli. The mutant Y195F α-CGTase showed similar characteristics with wild-type α-CGTase. The other mutant α-CGTases showed considerably lower activity for starch-degradation and cyclodextrin (CD) formation. Interestingly, we found that the main product of mutant Y195R α-CGTase was γ-CDs (50%), not α-CDs (35%). The mutant Y195I α-CGTase drastically altered the CD specificity of α-CGTase, which showed a switch toward the synthesis of both β- and γ-CDs with percentages of 34% and 38%, respectively. Other mutant CGTases retained the α-CD as the main product but with lower percentages than wild-type α-CGTase. Mutant Y195F, Y195I, and Y195R CGTases showed an optimal temperature of 50°C and pH 6.5. The mutants Y195I and Y195R also showed better thermostability. These findings suggested that aromatic amino acids Tyr or Phe at the 195 position were important for the amylolytic activity and cyclization specificity of α-CGTase. The mutants Y195I CGTase and Y195R CGTase have potential applications for γ-CD production in the future.