Starch-fibers composites, a study of all-polysaccharide foams from microwave foaming to biodegradation

Sustainable composite foams based on rice starch and cellulosic long fibers were successfully fabricated using microwave irradiation. They were presented as a promising method to recycle some of the textile industry waste. A deep study of the processability and functionality of the composites revealed the performance improvement of starch with the addition of long cellulosic fibers, especially with 6 wt% of Arbocel®, in terms of foamability, water, and mechanical resistance features. Moreover, sodium bicarbonate, which acted as a blowing and pulping agent, led to a lower density and better fiber distribution that resulted in an improvement of the foams' functionalities. The range of the study is new in the domain of long fiber foam composites in terms of the foaming capability, and mechanical, thermal, and water resistance properties. Furthermore, all foams showed excellent biodegradability properties against a fungus commonly found in the environment; for example, values around 60 % weight loss after 33 days. Finally, the assessment of the CO2 emission during the process underlines the environmental benefits of the method employed.

Specific ion effects on lignin adsorption and transport through cellulose confinements

The presence of ions in a solution is anticipated to induce distinct effects on macromolecules. Consequently, the tuning of adsorption and mass transfer of lignin molecules can be achieved by incorporating ions with chaotropic or kosmotropic characteristics. This study examines the adsorption and mass transfer behavior of lignin molecules across model cellulose membranes in presence of ions from the Hofmeister series. Experimental investigations encompassed the use of diffusion cells to quantify lignin's mass transfer through the membranes, and quartz crystal microbalance with dissipation (QCM-D) monitoring was used for adsorption studies. Notably, at high ion concentrations, the mass transport rate of lignin was observed to be lower in the presence of highly hydrated (kosmotropic) sulfate ions, conforming to the Hofmeister series. Intriguingly, this relationship was not apparent at lower ion concentrations. Furthermore, QCM-D experiments indicated that lignin displayed higher adsorption onto the cellulose surface when exposed to less hydrated (chaotropic) nitrate anions. This behavior can be rationalized by considering the system's increased entropy gain, facilitated by the release of adsorbed ions and water molecules from the cellulose surface upon lignin adsorption. This study highlights the complexity of ion-specific effects on mass transfer and adsorption processes and their dependency on ion concentrations.

Gamma-valerolactone biorefinery: Catalyzed birch fractionation and valorization of pulping streams with solvent recovery

In this study, we propose a full gamma-valerolactone (GVL) organosolv biorefinery concept including the utilization of all pulping streams, solvent recovery, and preliminary material and energy balances. GVL is a renewable and non-toxic solvent that fractionates woody biomass. The silver birch chips were pulped (45-65 wt% GVL, 150 °C, 2 h) under a series of acid-catalyzed conditions (5-12 kg H₂SO₄/t), and the fully bleached pulp was spun into fibers by the IONCELL® process and knitted into the fabric. The dissolved lignin was precipitated by water from spent liquor (1:1) and processed into polyhydroxyurethane. Most of the dissolved hemicelluloses were in the form of xylose, therefore, the crystallization efficiency of xylose from spent liquor in the presence of residual GVL was studied. The GVL recovery rate in the lab column was 66%, however by increasing the number of equilibrium stages, 99% recovery could be achieved.

Enhanced lignin degradation of paddy straw and pine needle biomass by combinatorial approach of chemical treatment and fungal enzymes for pulp making

Paddy straw (PS) and pine needles (PN) are one of the challenging biomasses in terms of disposal and compost making due to their high silica and tannin contents. Particulate air pollution, loss of biodiversity and respiratory impairments are some of disastrous outcomes caused by burning. However, high percentage of cellulose and hemicellulose makes them potential substrate for paper and pulp industries. The main aim of work was to study and utilize a combinatorial approach of weak chemical treatment and lignin degrading fungal species as agents of effective production of lignin modifying enzymes (LME's) for lignin depolymerisation from the biomasses. Phanerochaete chrysosporium was found to be the best degrader of lignin (47.11 % in PS + PN in 28 days) with maximum LME's production between 10th-17th days. Efficient lignin degradation in the PS and PN biomass will aid further application in pulp production supporting the transition to a circular economy in a greener way.

Characterization of municipal biowaste categories for their capacity to be converted into a feedstock aqueous slurry to produce methane by anaerobic digestion

Biowaste material is a good candidate for the production of energy in urban territories. The presence of undesirable or constituents mixed with the biowaste collected by municipalities makes it difficult to recycle organic matter of sufficient quality for agricultural uses. Methane production is particularly attractive for energy recovery notably because this energy vector can be distributed using the grid already in place for natural gas in many cities. Depending on the origin and biochemical composition of biowaste, methane can be produced using thermochemical (gasification then syngas methanation) or biological processes (anaerobic digestion). The objective of this work was to characterize the ability of biowaste to be used as a feedstock for anaerobic digestion. Based on considerations such as the quantities produced and the availability, four categories of biowaste produced in the city of Lyon were identified as potential key resources: Garden biowaste (GBW), restauration biowaste (RBW), household biowaste (HBW) and supermarkets biowaste (SMBW). Representative samples were taken from the sites of production and analyzed for parameters including biomethane potential (BMP). Each sample was then fractioned by leaching and the distribution of the BMP between the particulate fraction and the readily soluble fraction was assessed. GBW organic matter exhibited high hemicellulose content (over 81% of VS) and a low BMP which was very poorly distributed into its soluble fraction (2 NL·kg_TS^-1). RBW, HBW and SMBW showed a much higher BMP with a strong distribution in the soluble fraction (100 NL·kg_TS^-1). Plastic materials were found to account for up to 40% of the mass of SMBW sample. Altogether, GBW was identified as non-favorable for anaerobic digestion and recommended rather for thermochemical conversion. HBW, RBW and SMBW revealed adapted to anaerobic. Pulping was shown to be applicable in order to convert the 3 biowaste materials into a pumpable slurry with high biomethane potential.

Kraft lignin biorefinery: A perspective

Lignin is a huge energy and carbon reserve but owing to its highly biologically recalcitrant nature it is commonly regarded as a waste in lignocellulosic biomass biorefinery. To realize the lignin biorefinery, it is proposed to use Kraft lignin, isolated from black liquor from Kraft pulping mills, as starting material to be fragmented by fast pyrolysis or selective catalysis to aromatic sub-units and to be post-refining with additional cleavage reaction and separation/purification as commodity aromatics pool in chemical industries. This Note calls for research efforts on detailed investigation of the feasibility of this proposed scenario.

Enzymatic degradation of sulfite-pulped softwoods and the role of LPMOs

BACKGROUND

Recent advances in the development of enzyme cocktails for degradation of lignocellulosic biomass, especially the discovery of lytic polysaccharide monooxygenases (LPMOs), have opened new perspectives for process design and optimization. Softwood biomass is an abundant resource in many parts of the world, including Scandinavia, but efficient pretreatment and subsequent enzymatic hydrolysis of softwoods are challenging. Sulfite pulping-based pretreatments, such as in the BALI™ process, yield substrates that are relatively easy to degrade. We have assessed how process conditions affect the efficiency of modern cellulase preparations in processing of such substrates.

RESULTS

We show that efficient degradation of sulfite-pulped softwoods with modern, LPMO-containing cellulase preparations requires the use of conditions that promote LPMO activity, notably the presence of molecular oxygen and sufficient reducing power. Under LPMO activity-promoting conditions, glucan conversion after 48-h incubation with Cellic^® CTec3 reached 73.7 and 84.3% for Norway spruce and loblolly pine, respectively, at an enzyme loading of 8 mg/g of glucan. The presence of free sulfite ions had a negative effect on hydrolysis efficiency. Lignosulfonates, produced from lignin during sulfite pretreatment, showed a potential to activate LPMOs. Spiking of Celluclast^®, a cellulase cocktail with low LPMO activity, with monocomponent cellulases or an LPMO showed that the addition of the LPMO was clearly more beneficial than the addition of any classical cellulase. Addition of the LPMO in reactions with spruce increased the saccharification yield from approximately 60% to the levels obtained with Cellic^® CTec3.

CONCLUSIONS

In this study, we have demonstrated the importance of LPMOs for efficient enzymatic degradation of sulfite-pulped softwood. We have also shown that to exploit the full potential of LPMO-rich cellulase preparations, conditions promoting LPMO activity, in particular the presence of oxygen and reducing equivalents are necessary, as is removal of residual sulfite from the pretreatment step. The use of lignosulfonates as reductants may reduce the costs related to the addition of small molecule reductants in sulfite pretreatment-based biorefineries.

Synthesis and characterization of carboxymethyl cellulose from office waste paper: a greener approach towards waste management

In the present study, functionalization of mixed office waste (MOW) paper has been carried out to synthesize carboxymethyl cellulose, a most widely used product for various applications. MOW was pulped and deinked prior to carboxymethylation. The deinked pulp yield was 80.62 ± 2.0% with 72.30 ± 1.50% deinkability factor. The deinked pulp was converted to CMC by alkalization followed by etherification using NaOH and ClCH2COONa respectively, in an alcoholic medium. Maximum degree of substitution (DS) (1.07) of prepared CMC was achieved at 50 °C with 0.094 M and 0.108 M concentrations of NaOH and ClCH2COONa respectively for 3h reaction time. The rheological characteristics of 1-3% aqueous solution of optimized CMC product showed the non-Newtonian pseudoplastic behavior. Fourier transform infra red (FTIR), nuclear magnetic resonance (NMR) and scanning electron microscope (SEM) study were used to characterize the CMC product.

Combining the effects of pulping severity and alkali concentration to optimize the lignocellulose-based AlkaPolP biorefinery concept

Within the framework of the development of a novel lignocellulose biorefinery concept alkaline polyol pulping (AlkaPolP) of Pinus sylvestris was performed at different alkali concentrations. The obtained experimental data were used to develop simple mathematical models that allow the prediction of product yields and properties in dependence on a single parameter combining the effects of time, temperature and catalyst concentration. For this purpose the usual approach expressing the pulping severity R0 had to be complemented by the alkali concentration resulting in a modified severity factor R₀('). The found regression models in the form of functions f(R₀(')) can be used as a tool for the identification of those pulping conditions giving the desired product characteristics. Because the yields of the biorefinery products reach their maxima at different pulping conditions the optimization of the whole process turned out to be a multi-objective optimization problem.

Facile pulping of lignocellulosic biomass using choline acetate

Treating ground bagasse or Southern yellow pine in the biodegradable ionic liquid (IL), choline acetate ([Cho][OAc]), at 100°C for 24h led to dissolution of hemicellulose and lignin, while leaving the cellulose pulp undissolved, with a 54.3% (bagasse) or 34.3% (pine) reduction in lignin content. The IL solution of the dissolved biopolymers can be separated from the undissolved particles either by addition of water (20 wt% of IL) followed by filtration or by centrifugation. Hemicellulose (19.0 wt% of original bagasse, 10.2 wt% of original pine, containing 14-18 wt% lignin) and lignin (5.0 wt% of original bagasse, 6.0 wt% of original pine) could be subsequently precipitated. The pulp obtained from [Cho][OAc] treatment can be rapidly dissolved in 1-ethyl-3-methylimidazolium acetate (e.g., 17 h for raw bagasse vs. 7h for pulp), and precipitated as cellulose-rich material (CRM) with a lower lignin content (e.g., 23.6% for raw bagasse vs. 10.6% for CRM).