Pb nanospheres encapsulated in metal-organic frameworks-derived porous carbon as anode for high-performance sodium-ion batteries

Alloying-type anode materials are considered promising candidates for sodium-ion batteries (SIBs) due to their high theoretical capacities. However, their application is limited by the severe capacity decay stemming from dramatic volume changes during Na+ insertion/extraction processes. Here, Pb nanospheres encapsulated in a carbon skeleton (Pb@C) were successfully synthesized via a facile metal-organic frameworks (MOFs)-derived method and used as anodes for SIBs. The nanosized Pb particles are uniformly incorporated into the porous carbon framework, effectively mitigating volume changes and enhancing Na+ ion transport during discharging/charging. Benefiting from this unique architecture, a reversible capacity of 334.2 mAh g-1 at 2 A g-1 is achieved after 6000 cycles corresponding to an impressive 88.2 % capacity retention and a minimal capacity loss of 0.00748 % per cycle. Furthermore, a high-performance full sodium-ion battery of Pb@C//NVPF was constructed, demonstrating a high energy density of 291 Wh kg-1 and power density of 175 W kg-1. This facile MOFs-derived method offers insights into the design of high-capacity alloy-type anode materials using Pb sources, opening up new possibilities for innovative approaches to Pb recycling and pollution prevention.

Designing hard carbon microsphere structure via halogenation amination and oxidative polymerization reactions for sodium ion insertion mechanism investigation

Hard carbon as a negative electrode material for sodium-ion batteries (SIBs) has great commercial potential and has been widely studied. The sodium-ion intercalation in graphite domains and the filling of closed pores in the low voltage platform region still remain a subject of controversy. We have successfully constructed hard carbon materials with a pseudo-graphitic structure by using polymerizable p-phenylenediamine and dichloromethane as carbon sources. This was achieved by a halogenated amination reaction and oxidative polymerization. It was found that the capacity of hard carbon materials mainly originates from intercalation into graphite domains. The study found that the prepared hard carbon could store 339.33 mAh g-1 of sodium in a reversible way at a current density of 25 mA g-1, and it had an initial coulomb efficiency of 80.23%. It even maintained a reversible sodium storage capacity of 125.53 mAh g-1 at a high current density of 12.8 A g-1. Based on the analysis of hard carbon structure and electrochemical performance, it was shown that the materials conform with an "adsorption-intercalation" mechanism for sodium storage.

Enhanced redox kinetics in hierarchical tubular FeSe2 by incorporating Se quantum dots towards high-performance sodium-ion batteries

Metal selenides have emerged as promising Na-storage anode materials owing to their substantial theoretical capacity and high cost-effectiveness. However, the application of metal selenides is hindered by inferior electronic conductivity, huge volume variation, and sluggish kinetics of ionic migration. In response to these challenges, herein, a hierarchical hollow tube consisting of FeSe2 nanosheets and Se quantum dots anchored within a carbon skeleton (HT-FeSe2/Se/C) is strategically engineered and synthesized. The most remarkable feature of HT-FeSe2/Se/C is the introduction of Se quantum dots, which could lead to high electron density near the Fermi level and significantly enhance the overall charge transfer capability of the electrode. Moreover, the distinctive hollow tubular structure enveloped by the carbon skeleton endows the HT-FeSe2/Se/C anode with robust structural stability and fast surface-controlled Na-storage kinetics. Consequently, the as-synthesized HT-FeSe2/Se/C demonstrates a reversible capacity of 253.5 mAh/g at a current density of 5 A/g and a high specific capacity of 343.9 mAh/g at 1 A/g after 100 cycles in sodium-ion batteries (SIBs). Furthermore, a full cell is assembled with HT-FeSe2/Se/C as the anode, and a vanadium-based cathode (Na3V2(PO4)2O2F), showcasing a high specific capacity of 118.1 mAh/g at 2 A/g. The excellent performance of HT-FeSe2/Se/C may hint at future material design strategies and advance the development and application of SIBs.

Compositing pine pollen derived carbon matrix with Na4FeV(PO4)3 nanoparticle for cost-effective sodium-ion batteries cathode

Na super-ion conductor type material Na3V2(PO4)3 has been widely researched as the cathode of sodium-ion batteries (SIBs) in recent years, but the unsatisfying cost of Na3V2(PO4)3 impedes its wide application in SIBs. In this study, iron element is used to replace part of vanadium in Na3V2(PO4)3 to reduce its expense, and pine pollen is applied for the first time as a very effective carbon source to improve the performance of Na4FeV(PO4)3. The fabricated composite material achieves a capacity of 105 mA h g-1 under 0.2 C and fascinating cycling stability over 94 % under 2 C for 500 cycles and 98 % under 10 C for 1000 cycles. The excellent cycle performance is caused by the involvement of pine pollen that acts as a carbon matrix to enhance the electron conductivity and block the agglomeration of active material effectively, thus the well-dispersed nano sized Na4FeV(PO4)3 shortens the diffusion path of sodium ion and gains a remarkable rate capability. Moreover, the distinguished reversibility during the charge and discharge procedures is ascribed also to the robust structure of Na4FeV(PO4)3. This work provides an efficient route to realize the economic cathode material of SIBs with good performance.

Micro-mesoporous cobalt phosphosulfide (Co3S4/CoP/NC) nanowires for ultrahigh rate capacity and ultrastable sodium ion battery

The construction of heterostructure materials has been demonstrated as the promising approach to design high-performance anode materials for sodium ion batteries (SIBs). Herein, micro-mesoporous cobalt phosphosulfide nanowires (Co3S4/CoP/NC) with Co3S4/CoP hetero-nanocrystals encapsulating into N-doped carbon frameworks were successfully synthesized via hydrothermal reaction and subsequent phosphosulfidation process. The obtained micro-mesoporous nanowires greatly improve the charge transport kinetics from the facilitation of the charge transport into the inner part of nanowire. When evaluated as SIBs anode material, the Co3S4/CoP/NC presents outstanding electrochemical performance and battery properties owing to the synergistic effect between Co3S4 and CoP nanocrystals and the conductive carbon frameworks. The electrode material delivers outstanding reversible rate capacity (722.33 mAh/g at 0.1 A/g) and excellent cycle stability with 522.22 mAh/g after 570 cycles at 5.0 A/g. Besides, the Ex-situ characterizations including XRD, XPS, and EIS further revealed and demonstrated the outstanding sodium ion storage mechanism of Co3S4/CoP/NC electrode. These findings pave a promising way for the development of novel metal phosphosulfide anodes with unexpected performance for SIBs and other alkali ion batteries.

An advanced high-rate capability sodium-ion anode: Few-layered NbSe2 with a mechanism of parallel running intercalation and conversion

The unique superconductivity and charge density wave transition characteristics of NbSe2 make it worthy of exploring its electrochemical performance and potential applications in the field of batteries. Herein, the bulk NbSe2 was successfully exfoliated into few-layered NbSe2 nanostructures by wet grinding exfoliation approach, which solved the issues of its long activation period and poor cycle stability. The strong Nb-Se bond in the plane and weak van der Waals force between the adjacent layers could render the fast Na+ diffusion, provide abundant reaction sites and multi-directional migration paths, thus accelerate the ionic conductivity. The theoretical calculations verified the high Na+ adsorption tendency between the NbSe2 interlayers stemming from the continuous region of charge accumulation. Thanks to the unique electronic and two-dimensional few-layered structures, the exfoliated NbSe2 exhibited a high cyclic stability with a capacity of 502 mA h g-1 over 2800 cycles at 10 A/g. In addition, the reaction mechanism was studied by in-situ X-ray diffraction and other tests, indicating a reaction mechanism containing of simultaneous intercalation (NbSe2↔NaxNbSe2↔NaNbSe2↔Na1+xNbSe2) and conversion processes in NbSe2. This parallelly running mechanism not only alleviates the volume change but also ensures a high specific capacity. Additionally, different lattice planes of the NaNbSe2 intermediate in the intercalation process experience varying degrees of contraction and expanding in d-spacing due to the influence of Coulombic force.

Heterogeneous engineering and carbon confinement strategy to synergistically boost the sodium storage performance of transition metal selenides

Transition metal selenides (TMSs) stand out as a promising anode material for sodium-ion batteries (SIBs) owing to their natural resources and exceptional sodium storage capacity. Despite these advantages, their practical application faces challenges, such as poor electronic conductivity, sluggish reaction kinetics and severe agglomeration during electrochemical reactions, hindering their effective utilization. Herein, the dual-carbon-confined CoSe2/FeSe2@NC@C nanocubes with heterogeneous structure are synthesized using ZIF-67 as the template by ion exchange, resorcin-formaldehyde (RF) coating, and subsequent in situ carbonization and selenidation. The N-doped porous carbon promotes rapid electrolyte penetration and minimizes the agglomeration of active materials during charging and discharging, while the RF-derived carbon framework reduces the cycling stress and keeps the integrity of the material structure. More importantly, the built-in electric field at the heterogeneous boundary layer drives electron redistribution, optimizing the electronic structure and enhancing the reaction kinetics of the anode material. Based on this, the nanocubes of CoSe2/FeSe2@NC@C exhibits superb sodium storage performance, delivering a high discharge capacity of 512.6 mA h g-1 at 0.5 A g-1 after 150 cycles and giving a discharge capacity of 298.2 mA h g-1 at 10 A g-1 with a CE close to 100.0 % even after 1000 cycles. This study proposes a viable method to synthesize advanced anodes for SIBs by a synergy effect of heterogeneous interfacial engineering and a carbon confinement strategy.

Cation/Anion-Dual regulation in Na3MnTi(PO4)3 cathode achieves the enhanced electrochemical properties of Sodium-Ion batteries

Na3MnTi(PO4)3 (NMTP) emerges as a promising cathode material with high-performance for sodium-ion batteries (SIBs). Nevertheless, its development has been limited by several challenges, including poor electronic conductivity, the Mn3+ Jahn-Teller effect, and the presence of a Na+/Mn2+ cation mixture. To address these issues, we have developed a cation/anion-dual regulation strategy to activate the redox reactions involving manganese, thereby significantly enhancing the performance of NMTP. This strategy simultaneously enhances the structural dynamics and facilitates rapid ion transport at high rates by inducing the formation of sodium vacancy. The combined effects of these modifications lead to a substantial improvement in specific capacity (79.1 mAh/g), outstanding high-rate capabilities (35.9 mAh/g at 10C), and an ultralong cycle life (only 0.040 % capacity attenuation per cycle over 250 cycles at 1C for Na3.34Mn1.2Ti0.8(PO3.98F0.02)3) when used as a cathode material in SIBs. Furthermore, its performance in full cell demonstrates impressive rate capability (44.4 mAh/g at 5C) and exceptional cycling stability (with only 0.116 % capacity decay per cycle after 150 cycles at 1C), suggesting its potential for practical applications. This work presents a dual regulation strategy targeting different sites, offering a significant advancement in the development of NASICON phosphate cathodes for SIBs.

Rod-like Ni-CoS2@NC@C: Structural design, heteroatom doping and carbon confinement engineering to synergistically boost sodium storage performance

Currently, conversion-type transition metal sulfides have been extensively favored as the anodes for sodium-ion batteries due to their excellent redox reversibility and high theoretical capacity; however, they generally suffer from large volume expansion and structural instability during repeatedly Na+ de/intercalation. Herein, spatially dual-confined Ni-doped CoS2@NC@C microrods (Ni-CoS2@NC@C) are developed via structural design, heteroatom doping and carbon confinement to boost sodium storage performance of the material. The morphology of one-dimensional-structured microrods effectively enlarges the electrode/electrolyte contact area, while the confinement of dual-carbon layers greatly alleviates the volume change-induced stress, pulverization, agglomeration of the material during charging and discharging. Moreover, the introduction of Ni improves the electrical conductivity of the material by modulating the electronic structure and enlarges the interlayer distance to accelerate Na+ diffusion. Accordingly, the as-prepared Ni-CoS2@NC@C exhibits superb electrochemical properties, delivering the satisfactory cycling performance of 526.6 mA h g-1 after 250 cycles at 1 A g-1, excellent rate performance of 410.9 mA h g-1 at 5 A g-1 and superior long cycling life of 502.5 mA h g-1 after 1,500 cycles at 5 A g-1. This study provides an innovative idea to improve sodium storage performance of conversion-type transition metal sulfides through the comprehensive strategy of structural design, heteroatom doping and carbon confinement.

Boosting sodium-ion battery performance by anion doping in NASICON Na4MnCr(PO4)3 cathode

Na superionic conductor (NASICON)-structured Na4MnCr(PO4)3 (NMCP) possessing unique three-electron transfer process renders admirable energy density for sodium ion batteries (SIBs). However, the current issues like its sluggish Na+ diffusion kinetics, deficient intrinsic conductivity, and unsatisfactory structural stability, hinder its practical application. Herein, a selective replacement of O elements in PO4 group by Cl anions in the NMCP system was developed to significantly enhance its electrochemical performance. The results affirm that the enhanced performance of Cl doped samples can be attributed to the enlargement of cell size, the creation of Na vacancies and the weakness of Na2O bond after Cl doping. The as-prepared Na3.85□0.15MnCr(PO3.95Cl0.05)3/C (NMCPC - 15/C) cathode delivers a high capacity (128.0 mAh/g at 50 mA g-1) and excellent rate performance (73.0 mAh/g at 1000 mA g-1) in contrast to NMCP/C that merely provides 105.2 mAh/g at 50 mA g-1 and reduces to 47.4 mAh/g at 1000 mA g-1. Meanwhile, NMCPC - 15/C shows a capacity retention of 60.7 % at 1000 mA g-1 after 500 cycles, while only 37.1 % for NMCP/C in the same test conditions. Moreover, the satisfactory performance and energy density of NMCPC - 15/C||hard carbon (HC) full cell confirm the potential practicality of NMCPC - 15. Therefore, chloride ions doping into NMCP has practical application prospects in the preparation of high-performance cathode materials and our work also offers new inspiration to apply anion doping strategies in promoting the performance of the other NASICON-structured cathodes for SIBs.

2D Exfoliation Chemistry Towards Covalent Pseudo-Layered Phosphate Framework Derived by Radical/Strain-Synergistical Process

2D compounds exfoliated from weakly bonded bulk materials with van der Waals (vdW) interaction are easily accessible. However, the strong internal ionic/covalent bonding of most inorganic crystal frameworks greatly hinders 2D material exfoliation. Herein, we first proposed a radical/strain-synergistic strategy to exfoliate non-vdW interacting pseudo-layered phosphate framework. Specifically, hydroxyl radicals (•OH) distort the covalent bond irreversibly, meanwhile, H2O molecules as solvents, further accelerating interlayered ionic bond breakage but mechanical expansion. The innovative 2D laminar NASICON-type Na3V2(PO4)2O2F crystal, exfoliated by •OH/H2O synergistic strategy, exhibits enhanced sodium-ion storage capacity, high-rate performance (85.7 mA h g-1 at 20 C), cyclic life (2300 cycles), and ion migration rates, compared with the bulk framework. Importantly, this chemical/physical dual driving technique realized the effective exfoliation for strongly coupled pseudo-layered frameworks, which accelerates 2D functional material development.

Improved Compatibility of α-NaMnO2 Cathodes at the Interface with Safer and more Reliable Electrolytes

The behaviour and compatibility of monoclinic sodium manganite, α-NaMnO2, cathodes at the interface with electrolytes based on the 1-ethyl-3-methylimidazolium bis(fluorosulfonyl)imide (EMIFSI) and N-trimethyl-N-butylammonium bis(fluorosulfonyl)imide (N1114FSI) ionic liquids is presented and discussed. The Na+ insertion process was analysed through cyclic voltammetry tests combined with impedance spectroscopy measurements and the cell performance was tested by charge-discharge cycles. XPS and FIB-SEM measurements allowed analysis of the surface composition and the morphology of post-mortem cathodes. Overall, the α-NaMnO2 cathode showed high reversibility in N1114FSI-based electrolyte, delivering 60 % of the initial capacity after 1200 cycles in conjunction with a Coulombic efficiency above 99%. To our knowledge, these very promising results are the best result obtained till now for monolithic α-NaMnO2 cathodes, are ascribable to the formation of a stable passive layer onto the electrode surface, as confirmed by spectroscopic analysis.

Multifunctional Fe-S bonds assist poly(3,4-ethylenedioxythiophene) to enhance iron diselenide for ultra-long sodium storage lifetime

Transition metal selenides (TMS) have been used to prepare hundreds of electrode materials for ion batteries due to their superior theoretical capacity, but have been repeatedly limited by the sluggish reaction kinetics and the enormous volume change during the repeated charge/discharge process. Here, we report a facile strategy to fabricate organic-inorganic composites by engineering a unique chemical bonding interface between TMS and conductive polymers. For the first time, poly(3,4-ethylenedioxythiophene) (PEDOT) is utilized to encapsulate iron diselenide (FeSe2) nanoparticles by in situ polymerization, and the Fe-S bonds are meanwhile formed at the interface of FeSe2 and PEDOT. The experimental analysis demonstrates the stability of Fe-S bonds during the sodiation/desodiation process and after long cycling, which can serve as a "bridge" for fast charge transfer and also serve as a "rivet" to stabilize the composite structure. When used for sodium ion storage, the composite offers an exceptionally long lifetime of up to 17,000 loops at 10 A/g without capacity degradation. In addition, it delivers a high specific capacity of 490.4 mAh/g and retains 60 % when the current density is amplified 150 times. The assembled full cell also exhibits excellent cycling stability. This work will provide a feasible way to improve the metal oxide/sulfide/selenides for long-life ion batteries.

Facile synthesis of NiCoSe2@carbon anode for high-performance sodium-ion batteries

Sodium-ion batteries offer significant advantages in terms of low-temperature performance and safety. In this study, we present a straightforward synthetic approach to produce bimetallic selenide NiCoSe2 nanoparticles grown on a three-dimensional porous carbon framework for application as anode materials in sodium-ion batteries. This unique architecture enhances reaction kinetics and structural stability. The three-dimensional interconnected porous carbon network establishes a continuous pathway of electronic conductive, while increasing specific surface area and mitigating volume expansion. Consequently, these features expedite ion transfer and enhance electrolyte interaction. Notably, compared to CoSe, NiCoSe2 exhibits reduced ion transport distances and lower sodium diffusion barriers. Leveraging these attributes, NiCoSe2/N, Se co-doped carbon composite materials (NiCoSe2/NSC) demonstrate a high specific capacity of 320.8 mAh/g, even after 1000 cycles at 5.0 A/g, with a capacity retention rate of 85.1%. The study further delves into the revelation of the reaction mechanism and ion transport pathway through in-situ X-ray diffraction (XRD) analysis and theoretical calculations. The development of these anode materials is poised to pave the way for advancements in sodium-ion battery technology.

N-doped 3D carbon encapsulating nickel selenide nanoarchitecture with cation defect engineering: An ultrafast and long-life anode for sodium-ion batteries

Transition metal chalcogenides (TMCs) hold great potential for sodium-ion batteries (SIBs) owing to their multielectron conversion reactions, yet face challenges of poor intrinsic conductivity, sluggish diffusion kinetics, severe phase transitions, and structural collapse during cycling. Herein, a self-templating strategy is proposed for the synthesis of a class of metal cobalt-doped NiSe nanoparticles confined within three-dimensional (3D) N-doped macroporous carbon matrix nanohybrids (Co-NiSe/NMC). The cation defect engineering within the developed Co-NiSe and 3D N-doped carbon plays a crucial role in enhancing intrinsic conductivity, reinforcing structural stability, and reducing the barrier to sodium ion diffusion, which are verified by a series of electrochemical kinetic analyses and density functional theory calculations. Significantly, such cation defect engineering not only reduces overpotential but also accelerates conversion reaction kinetics, ensuring both exceptional high-rate capability and extended durability. Consequently, the optimally engineered Co-NiSe/NMC demonstrates a remarkable rate performance, delivering 390 mAh g-1 at 10 A g-1. Moreover, it exhibits an unprecedented lifespan, maintaining a remarkable capacity of 403 mAh g-1 after 1400 cycles and 318 mAh g-1 after 4000 cycles, even at high rates of 1.0 and 2.0 A g-1, respectively. This work marks a substantial advancement in achieving both high performance and prolonged cycle life in sodium-ion batteries.

Optimizing electrochemical performance of Na0.67Ni0.17Co0.17Mn0.66O2 with P2 structure via preparing concentration-gradient particles for sodium-ion batteries

P2-type layered oxides for rechargeable sodium-ion batteries have drawn a lot of attention because of their excellent electrochemical performance. However, these types of cathodes usually suffer from poor cyclic stability. To overcome this disadvantage, in this work, novel ball-shaped concentration-gradient oxide Na0.67Ni0.17Co0.17Mn0.66O2 with P2 structure modified by Mn-rich surface is successfully prepared using co-precipitation method. The concentration of Mn increased from the inner core to the surface, endowing the material with an excellent cyclic stability. The cathode exhibits enhanced electrochemical properties than that of the sample synthesized by solid-state method and concentration-constant material. It shows 143.2 mAh/g initial discharge capacity and retains 131 mAh/g between 2 V and 4.5 V after 100 rounds. The significant improvement in the electrochemical properties of the sample benefits from the unique concentration-gradient structure, and the Mn-rich surface that effectively stabilizes the basic P2 structure. The relatively higher Ni content in the core leads to a slight improvement in the discharge capacity of the sample. This strategy may provide new insights for preparing layered cathodes for sodium-ion batteries with high electrochemical performance.

Organic polymer coating induced multiple heteroatom-doped carbon framework confined Co1-xS@NPSC core-shell hexapod for advanced sodium/potassium ion batteries

Synthesis of advanced structure and multiple heteroatom-doped carbon based heterostructure materials are the key to the preparation of high-performance energy storage electrode materials. Herein, the hexapod-shaped Co1-xS@NPSC has been triumphantly prepared using hexapod ZIF-67 as the sacrificial template to prepare Co1-xS inner core and N, P, and S tri-doped carbon (NPSC) as the shell through the carbonization of the organic polymer precursor. When applied as anode for Na+ batteries (SIBs) and K+ batteries (PIBs), Co1-xS@NPSC presents the high reversible specific capability of 747.4 mAh/g at 1.0 A/g after 235 cycles and 387.8 mAh/g at 5.0 A/g after 760 cycles for SIBs, as well as 326.7 mAh/g at 1.0 A/g after 180 cycles for PIBs. The excellent storage capacity and rate capability of Co1-xS@NPSC is ascribed to hexapod structure of ZIF-67 unlike the common dodecahedron, which is constructed with interior porous and exterior framework repository, donating supplemental active sites, and doping of multiple heteroatoms forming organic polymer coating inhibiting the volume expansion and restrains the agglomeration of Co1-xS nanoparticles. This approach has paved a bright avenue to exploit promising anode materials with novel structure and hetero-atom doping for high-performance energy storage devices.

Morphology design and electronic configuration of MoSe2 anchored on TiO2 nanospheres for high energy density sodium-ion half/full batteries

Molybdenum selenide (MoSe2) has shown potential sodium storage properties due to its large layer spacing (0.646 nm) and high theoretical capacity and narrow band gap. However, as the anode material of sodium ion batteries (SIBs), the MoSe2's performance is not ideal, especially due to the layer agglomeration and stacking caused by volume expansion and low intrinsic conductivity. Hence, morphology design and electronic configuration of MoSe2 is proposed via building MoSe2 nanosheets and auxiliary sulfur doping on the surface of the TiO2 hollow nanosphere (S-MoSe2@TiO2). The hierarchical shaped S-MoSe2@TiO2 effectively overcomes the shortcomings of high surface energy and weak interlayer van der Waals force of MoSe2. As anode for SIBs, S-MoSe2@TiO2 delivers enhanced cycling life and rate capability (308 mAh/g at 10 A/g after 1000 cycles) with the comparison of MoSe2@TiO2 or pure MoSe2 and TiO2. Such excellent sodium storage performance is due to the fast diffusion kinetics of Na+. When it is applied in sodium ion full batteries, the S-MoSe2@TiO2 anode based cell can reach a high energy density of 187.8 W h kg-1 at 148.3 W kg-1. The design of the new MoSe2-based hybrid provides a novel scheme for the preparation of advanced anode in SIBs.

Cobalt-vanadium sulfide yolk-shell nanocages from surface etching and ion-exchange of ZIF-67 for ultra-high rate-capability sodium ion battery

Development of high-performance metal sulfides anode materials is a great challenge for sodium-ion batteries (SIBs). In this work, a cobalt-based imidazolate framework (ZIF-67) were firstly synthesized and applied as precursor. After the successive surface etching, ion exchange and sulfidation processes, the final cobalt-vanadium sulfide yolk-shell nanocages were obtained (CoS2/VS4@NC) with VS4 shell and CoS2 yolk encapsulated into nitrogen doped carbon frameworks. This yolk-shell nanocage structure effectively increases the specific surface area and provides enough space for inhibiting the volume change during charge/discharge processes. Besides, the nitrogen doped carbon skeleton greatly improves the ionic conductivity and facilitates ion transport. When used as the anode materials for SIBs, the yolk-shell nanocages of CoS2/VS4@NC electrode exhibits excellent rate capability and stable cycle performance. Notably, it displays a long-term cycling stability with excellent capacity of 417.28 mA h g-1 after 700 cycles at a high current density of 5 A/g. This developed approach here provides a new route for the design and synthesis of various yolk-shell nanocages nanomaterials from enormous MOFs with multitudinous compositions and morphologies and can be extended to the application into other secondary batteries and energy storage fields.

Promoting threshold voltage of P2-Na0.67Ni0.33Mn0.67O2 with Cu2+ cation doping toward high-stability cathode for sodium-ion battery

P2-type Na0.67Ni0.33Mn0.67O2 has attracted considerable attraction as a cathode material for sodium-ion batteries owing to its high operating voltage and theoretical specific capacity. However, when the charging voltage is higher than 4.2 V, the Na0.67Ni0.33Mn0.67O2 cathode undergoes a detrimental irreversible phase transition of P2-O2, leading to a drastic decrease in specific capacity. To address this challenge, we implemented a Cu-doping strategy (Na0.67Ni0.23Cu0.1Mn0.67O2) in this work to stabilize the structure of the transition metal layer. The stabilization strategy involved reinforcing the transition metal-oxygen (TMO) bonds, particularly the MnO bond and inhibiting interlayer slip during deep desodiation. As a result, the irreversible phase transition voltage is delayed, with the threshold voltage increasing from 4.2 to 4.4 V. Ex-situ X-ray diffraction measurements revealed that the Na0.67Ni0.23Cu0.1Mn0.67O2 cathode maintains the P2 phase within the voltage window of 2.5-4.3 V, whereas the P2-Na0.67Ni0.33Mn0.67O2 cathode transforms entirely into O2-type Na0.67Ni0.33Mn0.67O2 when the voltage exceeds 4.3 V. Furthermore, absolute P2-O2 phase transition of the Na0.67Ni0.23Cu0.1Mn0.67O2 cathode occurred at 4.6 V, indicating that Cu2+ doping enhances the stability of the layer structure and increases the threshold voltage. The resulting Na0.67Ni0.23Cu0.1Mn0.67O2 cathode exhibited superior electrochemical properties, demonstrating an initial reversible specific capacity of 89.1 mAh/g at a rate of 2C (360 mA g-1) and retaining more than 78 % of its capacity after 500 cycles.

Confining Co1.11Te2 nanoparticles within mesoporous hollow carbon combination sphere for fast and ultralong sodium storage

Co1.11Te2 nanoparticles are in-situ uniformly grown within mesoporous hollow carbon combination sphere (MHCCS@Co1.11Te2) using a hard-template and spray drying process, solution impregnation and pyrolysis tellurization. Material characterizations reveal that Co1.11Te2, with a diameter of ∼ 20 nm, is attached to the internal walls of the unit spheres or embedded in the mesopore shells of the unit spheres, presenting a distinctive "ships-in-combination-bottles" nanoencapsulation structure. In sodium-ion half-cells, MHCCS@Co1.11Te2 exhibits excellent cycling stability, achieving reversible capacities of 257 mAh/g at 0.5 A/g after 250 cycles, 235 mAh/g at 1.0 A/g after 300 cycles and 161 mAh/g at 10.0 A/g after 1900 cycles. Electrochemical kinetic analyses and ex-situ characterizations reveal rapid electron/Na+ transport kinetics, prominent surface pseudocapacitive behavior, robust nanocomposite structure, and multi-step conversion reactions of sodium polytellurides. In sodium-ion full-cells, MHCCS@Co1.11Te2 still demonstrates stable cycling performance at 1.0 and 5.0 A/g and excellent rate capability. The superior electrochemical performance is associated with the nanoencapsulation structure based on mesoporous hollow carbon combination spheres, which promotes electron conduction and Na+ transport. The space-confined effect maintains the high electrochemical activity and cycling stability of Co1.11Te2.

Structural regulation of asphalt-based hard carbon microcrystals based on liquid-phase crosslinking to enhance sodium storage

Air-oxidation is an effective strategy to obtain promising carbon materials from asphalt for sodium-ion batteries. However, this method would generate a vast amount of gaseous pollutant, which pose challenges for recycling. Herein, a simple, cost-effective and environmentally friendly liquid-phase oxidation method is proposed. The oxygen-containing functional groups (-NO2) are introduced into asphalt, which effectively prevents the melting of asphalt and rearrangement of carbon layers during subsequent carbonization process. As a result, a carbon material with notable disorder degree, large interlayer spacing and abundant closed pores, is prepared. The as-prepared product demonstrates an impressive initial Coulombic efficiency of 88.3 % and an enhanced specific capacity of 317.0 mA h g-1, which is 2.6 times that of the pristine product. Moreover, when assembled with a Na3.32Fe2.34(P2O7)2 cathode, the full-cell delivers a high reversible capacity of 271.7 mA h g-1 at 30 mA g-1 with superb cycle life. This study offers a novel oxidation strategy and provides a solution for producing highly disordered carbon anodes from soft carbon precursors.

Recent Progress in Improving Rate Performance of Cellulose-Derived Carbon Materials for Sodium-Ion Batteries

Cellulose-derived carbon is regarded as one of the most promising candidates for high-performance anode materials in sodium-ion batteries; however, its poor rate performance at higher current density remains a challenge to achieve high power density sodium-ion batteries. The present review comprehensively elucidates the structural characteristics of cellulose-based materials and cellulose-derived carbon materials, explores the limitations in enhancing rate performance arising from ion diffusion and electronic transfer at the level of cellulose-derived carbon materials, and proposes corresponding strategies to improve rate performance targeted at various precursors of cellulose-based materials. This review also presents an update on recent progress in cellulose-based materials and cellulose-derived carbon materials, with particular focuses on their molecular, crystalline, and aggregation structures. Furthermore, the relationship between storage sodium and rate performance the carbon materials is elucidated through theoretical calculations and characterization analyses. Finally, future perspectives regarding challenges and opportunities in the research field of cellulose-derived carbon anodes are briefly highlighted.

Resolving the Origins of Superior Cycling Performance of Antimony Anode in Sodium-ion Batteries: A Comparison with Lithium-ion Batteries

Alloying-type antimony (Sb) with high theoretical capacity is a promising anode candidate for both lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs). Given the larger radius of Na+ (1.02 Å) than Li+ (0.76 Å), it was generally believed that the Sb anode would experience even worse capacity degradation in SIBs due to more substantial volumetric variations during cycling when compared to LIBs. However, the Sb anode in SIBs unexpectedly exhibited both better electrochemical and structural stability than in LIBs, and the mechanistic reasons that underlie this performance discrepancy remain undiscovered. Here, using substantial in situ transmission electron microscopy, X-ray diffraction, and Raman techniques complemented by theoretical simulations, we explicitly reveal that compared to the lithiation/delithiation process, sodiation/desodiation process of Sb anode displays a previously unexplored two-stage alloying/dealloying mechanism with polycrystalline and amorphous phases as the intermediates featuring improved resilience to mechanical damage, contributing to superior cycling stability in SIBs. Additionally, the better mechanical properties and weaker atomic interaction of Na-Sb alloys than Li-Sb alloys favor enabling mitigated mechanical stress, accounting for enhanced structural stability as unveiled by theoretical simulations. Our finding delineates the mechanistic origins of enhanced cycling stability of Sb anode in SIBs with potential implications for other large-volume-change electrode materials.

Simultaneously promoting the surface/bulk structural stability of Fe/Mn-based layered cathode for sodium ion batteries

Layered sodium iron manganese oxide cathodes have attracted great interest owing to their high specific capacity and cost-effective metal resources, while the detrimental phase transitions and surface structural degradation severely limit their commercial applications. In this work, the bulk and surface structure stability of a P2-Na0.67Fe0.5Mn0.5O2 cathode can be synergically enhanced by a one-step Li/Nb co-doping strategy. Structural characterizations reveal that Li doping promotes the formation of P2/O3 biphasic structure and makes the unfavorable P2-OP4 phase transition convert into a smooth solid-solution reaction. Nb doping enhances the mobility of sodium ions and forms strong Nb-O bonds, thereby enhancing the stability of the TMO2 layer structure. In particular, the Nb element induces the surface reorganization of an atomic-scale NaNbO3 coating layer, which could effectively prevent the dissolution of metals and surface side reactions. The synergistic mechanism of enhanced electrochemical performance is proved by multiple characterizations during cycling. As a result, the as-prepared Na0.67Li0.1Fe0.5Mn0.38Nb0.02O2 exhibits improved capacity retention of 85.4 % than raw material (45.7 %) after 100 cycles at 0.5C (1C = 174 mA g-1) within 2.0-4.0 V. This co-regulating strategy provides a promising approach to designing highly stable sodium-ion battery cathodes. Furthermore, a full cell of Na0.67Li0.1Fe0.5Mn0.38Nb0.02O2 with hard carbon displays excellent cycling stability (85.1 % capacity retention after 100 cycles), making its commercial operation possible. This synergistic strategy of biphasic structure and surface reorganization is a critical route to accelerate the application of layer oxide cathodes.

Bulk bismuth anodes for wide-temperature sodium-ion batteries enabled by electrolyte chemistry modulation

Sodium ion batteries (SIBs) are considered reliable supplies for next-generation energy devices. However, there is a limited understanding of strategies to prevent the performance deterioration of SIBs under extreme temperature conditions. This study aimed to address this challenge by developing modified electrolyte chemistry to achieve stable wide-temperature SIBs. Weakly Na+-solvating solvent 2-methyltetrahydrofuran (MeTHF) was used to promote the kinetics of Na+ de-solvation. Moreover, 1,2-dimethoxyethane (DME) was introduced as a co-solvent because of the high solubility for Na salts and the coupling reaction mechanism with the Bi electrode. The formulated electrolyte not only endows an anion-dominated NaF-rich solid electrolyte interface (SEI) layer, but also reduces the energy required for the Na+ across the SEI layer (from 291.2 to 89.6 meV). Consequently, Na||Bi half batteries achieve stable cycles at 400 mA g-1 at -20, 20 and 60 °C, respectively. Meanwhile, the extreme operating temperature of the batteries can be extended to -40 and 80 °C, which exceeds those of most current lithium/sodium-based batteries. Furthermore, full batteries employing Na3V2(PO4)3 as the cathode material exhibit stable operation over a wide temperature range of -20 to 60 °C. This electrolyte design strategy presented in this study shows significant promise for enabling wide-temperature SIBs with improved performance.

Boosting the sodium storage performance of iron selenides by a synergetic effect of vacancy engineering and spatial confinement

Recently, iron selenides have been considered as one of the most promising candidates for the anodes of sodium-ion batteries (SIBs) due to their cost-effectiveness and high theoretical capacity; however, their practical application is limited by poor conductivity, large volume variation and slow reaction kinetics during electrochemical reactions. In this work, spatially dual-carbon-confined VSe-Fe3Se4-xSx/FeSe2-xSx nanohybrids with abundant Se vacancies (VSe-Fe3Se4-xSx/FeSe2-xSx@NSC@rGO) are constructed via anion doping and carbon confinement engineering. The three-dimensional crosslinked carbon network composed of the nitrogen-doped carbon support derived from polyacrylic acid (PAA) and reduced graphene enhances the electronic conductivity, provides abundant channels for ion/electron transfer, ensures the structure integrity, and alleviates the agglomeration, pulverization and volume change of active material during the chemical reactions. Moreover, the introduction of S into iron selenides induces a large number of Se vacancies and regulates the electron density around iron atoms, synergistically improving the conductivity of the material and reducing the Na+ diffusion barrier. Based on the aforementioned features, the as-synthesized VSe-Fe3Se4-xSx/FeSe2-xSx@NSC@rGO electrode possesses excellent electrochemical properties, exhibiting the satisfactory specific capacity of 630.1 mA h g-1 after 160 cycles at 0.5 A/g and the reversible capacity of 319.8 mA h g-1 after 500 cycles at 3 A/g with the low-capacity attenuation of 0.016 % per cycle. This investigation provides a feasible approach to develop high-performance anodes for SIBs via a synergetic strategy of vacancy engineering and carbon confinement.

Constructing P2/O3 biphasic structure of Fe/Mn-based layered oxide cathode for high-performance sodium-ion batteries

Fe/Mn-based layered oxide cathode is regarded as a competitive candidate for sodium-ion batteries (SIBs) because of its high theoretical capacity, earth abundance and low cost. However, its poor cycling stability still remains a major bottleneck. Herein, P2/O3 biphasic Na0.67Fe0.425Mn0.425Cu0.15O2 layered oxide is successfully synthesized via a sol-gel method. It is observed that Cu substitution can facilitate the conversion of P2 to O3 phase, and the P2/O3 composite structure can be obtained with an appropriate amount of Cu. Meanwhile, in-situ XRD reveals that constructing P2/O3 composite structure can realize the highly reversible phase transition process of P2/O3-P2/P3-OP4/OP2 and decrease the lattice mismatch during Na+ insertion/extraction. Consequently, the biphasic P2/O3-Na0.67Fe0.425Mn0.425Cu0.15O2 electrode exhibits 87.1 % capacity retention after 100 cycles at 1C, while the single phase P2-Na0.67Fe0.5Mn0.5O2 electrode has only 36.4 %. Therefore, the constructing biphasic structure is proved to be an effective strategy for designing high-performance Fe/Mn-based layered oxide cathodes.

A high-energy-density NASICON-type Na3V1.25Ga0.75(PO4)3 cathode with reversible V4+/V5+ redox couple for sodium ion batteries

The stable three-dimensional framework and high operating voltage of sodium superionic conductor (NASICON)-type Na3V2(PO4)3 has the potential to work with long cycle life and high-rate performance; however, it suffers from the poor intrinsic electronic conductivity and low energy density. Herein, Ga3+ is introduced into Na3V2(PO4)3 to activate the V4+/V5+ redox couple at a high potential of 4.0 V for enhancing energy density of the materials (Na3V2-xGax(PO4)3). After the partial substitution of Ga3+ for V3+, three redox couples (V2+/V3+, V3+/V4+ and V4+/V5+) of V are reversibly converted in the voltage range of 1.4-4.2 V, suggesting multi-electrons (>2e-) involved in the reversible reaction, and simultaneously the electronic conductivity of the materials is effectively enhanced. As a result, the cathode with x = 0.75 exhibits excellent electrochemical properties: in the voltage range of 2.2-4.2 V, delivering an initial capacity of 105 mAh/g at 1C with a capacity retention rate of 92.3% after 400 cycles, and providing a stable reversible capacity of 88.3 mAh/g at 40C; and in the voltage range of 1.4-4.2 V, presenting the reversible capacity 152.3 mAh/g at 1C (497.6 Wh kg-1), and cycling stably for 1000 cycles at 20C with a capacity decay of 0.02375% per cycle. It is found that the Na3V2-xGax(PO4)3 cathodes possess the sodium storage mechanism of single-phase and bi-phase reactions. This investigation presents a useful strategy to enhance the energy density and cycling life of NASICON-structured polyanionic phosphates by activating high-potential V4+/V5+ redox couple.

Waste biomass garlic stem-derived porous carbon materials as high-capacity and long-cycling anode for lithium/sodium-ion batteries

Carbon materials are promising anode materials for rechargeable lithium and sodium-ion batteries, due to their low cost, high capacity, and structural designability. In this work, we selected a waste biomass, garlic stem, as the carbon precursor, and we systematically investigated the effect of pyrolysis temperature and time on their battery performance. We find that 800 °C and 2 h are the best pyrolysis conditions, which leads to the optimal carbon material (800C-2H) with a large layer spacing, abundant defect sites, high surface area, and sufficient micro/meso-porous structures. Due to these favorable properties, this carbon anode exhibits an impressive performance for Lithium-ion batteries, with a very high capacity of 480 mAh g-1 and no significant capacity fading after 3000 cycles. Besides, this anode also shows promising performance for Sodium-ion batteries, where a good capacity of 151.9 mAh g-1 and reasonable cycling of 100 cycles are achievable. We also carried out in-situ X-ray diffraction and in-situ Raman spectroscopy experiments to understand the relationship between carbon microstructures and their Li-ion storage.

Rational engineering of a carbon skeleton supported tin dioxide nanocomposite from MOF on graphene precursor for superior lithium and sodium ion storage

Tin dioxide (SnO2) is being investigated as a promising anode material for both lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs). Effectively dispersing small sized SnO2 crystals in well-designed carbonaceous matrices using eco-friendly materials and simplified methods is an urgent task. Herein, gallic acid (GA) molecules, abundant in plant kingdom, are firstly selected to react with few-layered graphene oxide (GO) in mild hydrothermal condition, and the GA modulated reduced graphene oxide (GA@RGO) supporting skeleton can be obtained. Then Sn-GA metal-organic framework (MOF) domains can be directly engineered on the surface of the GA@RGO sheets with controlled size and improved dispersion. Finally, the well-designed Sn-GA@RGO precursor is converted to the SnO2/C/RGO nanocomposite with significantly optimized microstructure. The SnO2/C/RGO sample delivers an excellent specific capacity of 823.6 mAh·g-1 after 700 cycles at 1000 mA·g-1 in half-cells and 741.3 mAh·g-1 after 50 cycles at 200 mA·g-1 in full-cells for LIBs, a specific capacity of 370.3 mAh·g-1 after 600 cycles at 200 mA·g-1 in half-cells for SIBs. The sample preparation strategy is rationally established by comprehensively understanding the interactions between GO sheets, Sn2+ ions and GA molecules, and the engineered SnO2/C/RGO nanocomposite has good prospects in wider fields.

High-performance Ni-free sustainable cathode Na0.67 Mg0.05 Fe0.1 Mn0.85 O2 for sodium-ion batteries

Having in mind the remarkable economic and environmental issues involved in the presence of nickel and cobalt metals in electrode compositions, new Na0.67 Mg0.05 Fe0.1 Nix Mn0.85-x O2 (x=0.0, 0.05, 0.1, 0.15) with a P2 type layered structure, are synthesized to be essayed as positive electrodes in sodium-ion batteries. The sol-gel route here proposed favors the obtention of highly pure and crystalline samples with a homogeneous distribution of the constituting elements. Both galvanostatic and voltammetric tests reveal a superior electrochemical behavior for the Ni-free sample, which delivers 94 mA h g-1 at 5C. This excellent performance is associated with a good kinetic response in terms of low charge and discharge hysteresis, high Na+ diffusivity, and low cell resistance. Ex-situ measurements evidenced the combined contribution of both the reversible electrolyte insertion and the formation of peroxo species. These advantageous properties allow this electrode to reach a remarkable behavior when is cycled either to low temperatures or high rates.

Metal-organic-framework derived Zn-V-based oxide with charge storage mechanism as high-performance anode material to enhance lithium and sodium storage

Transition metal oxides have been extensively studied due to their large theoretical capacities, but their practical application has been hampered by low electrical conductivity and dramatic volume fluctuation during cycling. In this work, we synthesized Zn3V2O8 material using Zn-V-MOF (metal-organic framework) as a sacrificial template to improve the electrochemical characteristics of lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs). Unique dodecahedral structure, larger specific surface area and higher ability to mitigate volume changes, improve the electrochemical reaction active site while accelerating ion transport. Zn3V2O8 with 2-methylimidazole as a ligand demonstrated a discharge capacity of 1225.9 mAh/g in LIBs and 761.6 mAh/g in SIBs after 300 cycles at 0.2 C. Density functional theory (DFT) calculation illustrates the smaller diffusion barrier energy and higher specific capacity in LIBs that is ascribed to the fact that Li has a smaller size and hence its diffusion is easier. This study may lead to a path for the manufacturing of high-performance LIBs and SIBs.

Aliovalent doping and structural design of MoSe2 with fast reaction kinetics for high-stable sodium-ion half/full batteries

The development of high-quality anode materials is critical for the advancement of sodium-ion batteries (SIBs). MoSe2 is a candidate anode for SIBs, while its inherent limitations, such as the agglomeration of nanosheets, poor electron conductance and mechanical strain due to volume changes during cycling, which can lead to decreased performance and durability in SIBs. To overcome the challenges, a novel aliovalent doping and structural engineering was taken to prepare reduced graphene oxide (rGO) functionalized and phosphorus-doped MoSe2 flake (P-MoSe2@rGO) via in situ growth technique. The unique structural design of P-MoSe2@rGO addresses material limitations and optimizes performance by providing a high conductive grid for ion/electron transfer, a large surface area for full electrolyte penetration, and effective suppression of MoSe2 nanosheet agglomeration and mechanical strain due to volume change during charge/discharge in SIBs. The P-MoSe2@rGO inherits the enhanced electronic conductivity and enlarged layer spacing (from 0.652 to 0.668 nm), which boosts the reaction kinetics and facilitates the insertion/extraction of sodium ions. The P-MoSe2@rGO exhibits excellent long-cycle properties with a high reversible capacity of 384 mAh/g at 2 A/g and 338 mAh/g at 10 A/g after 1450 circulations. Detailed discussion of reaction kinetics is conducted. Theoretical calculations prove that doping of P atoms in MoSe2 reduces the forbidden band gap from 1.443 to 1.397 eV and accelerates ion and electron migration. Furthermore, the full cell P-MoSe2@rGO//Na3V2(PO4)3@C (NVP@C) demonstrates a remarkable cycling durability of 326 mAh/g after 200 cycles and a high energy density of 159.6 Wh kg-1. This process provides a reference for the adjustment and modification of MoSe2 to adapt to high performance SIBs anode.

Invasive alien plant biomass-derived hard carbon anode for sodium-ion batteries

In the context of rampant growth of invasive plants, finding suitable ways for resource utilization has become the optimal choice for invasive plant management. In the field of energy storage, sodium-ion batteries have been limited by the lack of appropriate anode materials, and hard carbon stands out as the most promising candidate. Therefore, this study focuses on the preparation of biomass-derived carbons from three invasive plant species, namely Spartina alterniflora Loisel., Solidago canadensis L., and Erigeron canadensis L., through high-temperature carbonization. The resulting biomass carbons are then subjected to cleaning and activation processes to prepare sodium-ion anode materials. The internal structure of the materials was characterized using SEM, TEM, XRD, XPS, Raman spectroscopy, and BET. The materials exhibited a significant amount of pore structures, with interlayer spacing around 0.37 nm, which is larger than the original graphite interlayer spacing. The plant anode materials were assembled into full batteries for cyclic charge/discharge tests. The results show that all three anode materials have good multiplicative performance and excellent cyclable charge/discharge. After 100 cycles at a current of 50 mA in the voltage range of 0-3.0 V, the reversible capacities of the three materials reached 245.3, 207.19, and 227.12 mAh/g, respectively. Among them, the material derived from Spartina alterniflora maintained a capacity of 141.63 mAh/g even after 1000 cycles at a current of 200 mA, demonstrating the best capacity performance.

Cu/Ti co-doping boosting P2-type Fe/Mn-based layered oxide cathodes for high-performance sodium storage

Environmentally friendly P2-type layered iron manganese oxides appear to be one of the most potential cathode materials for sodium-ion batteries (SIBs). However, their practical application is hindered by the unfavorable phase transitions, dissolution of transition metals, and poor air stability. One effective strategy by either single-cation doping or high-cost Li involved co-doping is used to alleviate the problems. Here, low-cost Cu/Ti co-doping is introduced to boost P2-Na0.7Cu0.2Fe0.2Mn0.5Ti0.1O2 as an air and electrochemical stable cathode material for SIBs. The resulting electrode delivers an initial capacity of 130 mAh g-1 at 0.1C within 2.0-4.2 V, a reversible discharge capacity of 61.0 mAh g-1 at a high rate of 5C and a capacity retention ratio exceeding 71.1% after 300 cycles. In particular, the co-doped crystal structure is well-maintained after 1 month of exposure to air, and even 3 days of soaking in water. Furthermore, the enhancement is elucidated by the effectively mitigated P2-Z and the completely suppressed P2-P'2 phase transitions, the decreased volume variation proved by in-situ X-ray diffraction (XRD), as well as the lowered transition-metal dissolution evidenced by inductively coupled plasma optical emission spectrometer (ICP-OES) and X-ray photoelectron spectroscopy (XPS). The low-lost Cu/Ti doping strategy could thus be effective for designing and preparing environmentally friendly and high-performance cathode materials for SIBs.

In-situ constructing porous N-doped carbon skeleton with rich defects from modified polyamide acid to boost the high performance of Na3V2(PO4)3 cathode for full sodium-ion batteries

Generally, the transport of electrons and Na+ is seriously constrained in Na3V2(PO4)3 (NVP) due to intense interactions of V-O and PO bonds. Besides, polyamide acid (PAA) is hardly used in the sol-gel route due to insolubility. This work develops a facile liquid synthesis strategy based on modified PAA, achieving in-situ construction of a porous N-doped carbon framework with rich defects to improve the kinetics of NVP. The addition of triethylamine (TEA) reacts with carboxyls in PAA to achieve acid-base neutralization, turning PAA into polyamide salts with good solubility. The special morphology construction mechanism of this unique system was observed by ex-situ scanning electron microscopy (SEM) and Transmission electron microscopy (TEM). Specifically, PAA undergoes in-situ conversion into chain-like polyimide (PI) through a thermal polymerization mechanism during the pre-sintering process. Meanwhile, NVP precursors are evenly dispersed in the PI fibers, efficiently reducing the particle size. After the final treatment, the favorable porous carbon skeleton could be generated derived from the partial decomposition of PI, on which small active grains are in situ grown. The resulting N-doped carbon substrate contains rich defects, benefiting from the migration of Na+. Furthermore, the porous construction is conducive to alleviating the stress and strain generated by the high current impact, increasing the contact area between electrodes/electrolytes to improve the utilization efficiency of active substances. Comprehensively, the optimized samples exhibit a capacity of 82.1 mAh g-1 at 15C with a retention rate of 95.45 % after 350 cycles. It submits a capacity of 67.6 mAh g-1 at 90C and remains 52.2 mAh g-1 after 1500 cycles. Even in full cells, it reveals a value of 110.6 mAh g-1. This work guides the application of in-situ multiple modifications of polymers in electrode materials.

Structural regulation enabled stable hollow molybdenum diselenide nanosheet anode for ultrahigh energy density sodium ion pouch cell

For the continued use of sodium-ion batteries (SIBs), which require matching anode materials, it is crucial to create high energy density energy storage devices. Here, hollow nanoboxes shaped carbon supported sulfur-doped MoSe2 nanosheets (S-MoSe2@NC) are fabricated by in situ growth and heterodoping strategy. This ensures that the MoSe2 nanosheets are tightly anchored to the nanoboxes carbon, and the structure can effectively buffer the volume stress caused by sodium ion (de)intercalation, as well as providing abundant ion/electron migration transportations. As anode for SIBs, the S-MoSe2@NC shows a higher rate capability and excellent cycling stability (431.1 mAh/g after 1100 cycles at 10 A/g). This excellent cycle life and high rate ability are due to the structural stability and outstanding electronic conductance with reduced band gap of the S-MoSe2@NC, as evidenced by the diffusion analysis and theoretical calculation. In order to promote the application of SIBs, the S-MoSe2@NC and NaNi1/3Fe1/3Mn1/3O2 were assembled into a pouch cell, and the test found that besides the excellent cycle rate performance, the ultrahigh energy density of 256 Wh kg-1 and flexible characteristics can be achieved. This study has proven that building a structure with a rock-steady foundation and quick ion migration may efficiently control sodium storage and pave the way for novel applications of high-performance transition metal dichalcogenides in sodium storage.

Ultrahigh initial coulombic efficiency for deep sodium storage enabled by carbon-free vanadium-doping MoS2 hierarchical nanostructure

Molybdenum disulfide (MoS2) has garnered attention as a promising anode material for sodium-ion batteries due to its high theoretical capacity and unique lamellar texture. Nevertheless, unmodified MoS2 suffers from inferior electrical conductivity, poor reaction reversibility, and suboptimal cycle life upon repeated sodiation/desodiation. In this study, a novel carbon-free V-heteroatom doping MoS2 composite (abbr. VMS) with hierarchical laurustinus-like structure was synthesized by a facile one-step hydrothermal process. Specifically, the rational doping of V-atoms can effectively modulate the intrinsic electronic structure of pure MoS2, resulting in enhanced Na-ion diffusion rate, improved reaction kinetics and reduced activation energy compared to bare MoS2. Additionally, the hierarchical structure of the VMS composite, with sufficient spacing, effectively mitigates mechanical stress and ensures the integrity of active materials. Consequently, the prepared VMS composite possesses exceptional reaction reversibility (average ICE value of 92 %) and remarkable capacity retention (92.1 % after 450 cycles at 10 A/g). These findings contribute valuable insights into the development of advanced MoS2-based anode for sodium ion batteries.

3D flower-like hollow MXene@MoS2 heterostructure for fast sodium storage

Constructing an anode with fast electron transport and high cycling stability is important but challenging for large-scale applications of sodium-ion batteries (SIB). In this study, hierarchical flower-like MXene structures were synthesized using poly (methyl methacrylate) (PMMA) microsphere as templates. Subsequently, a straightforward hydrothermal reaction was utilized to anchor small-sized MoS2 nanosheets. The resulting MXene@MoS2 heterostructure exhibits a distinctive three-dimensional (3D) porous hollow architecture. This structure effectively addresses challenges related to self-aggregation of MoS2 nanosheets and volume expansion of the electrode material during Na+ insertion/extraction processes. Furthermore, the robust hetero-interface supports fast and stable electron transfer, thereby enhancing electrochemical reaction kinetics. The prepared MXene@MoS2 electrode demonstrates the specific capacity of 682.1 mA h g-1 at 0.2 A/g and the reversible capacity of 494.4 mA h g-1 after 1000 cycles at 5 A/g. It is noteworthy that the full battery assembled with the composite material as the anode can still maintain the capacity of 456.2 mA h g-1 after 80 cycles at 0.5 A/g. This outstanding reversible capacity and sustained stability over numerous cycles highlights its potential for a wide range of applications.

Interface ion-exchange strategy of MXene@FeIn2S4 hetero-structure for super sodium ion half/full batteries

Herein, a well-designed hierarchical architecture of bimetallic transition sulfide FeIn2S4 nanoparticles anchoring on the Ti3C2 MXene flakes has been prepared by cation exchange and subsequent high-temperature sulfidation processes. The introduction of MXene substrate with excellent conductivity not only accelerates the migration rate of Na+ to achieve fast reaction dynamics but provides abundant deposition sites for the FeIn2S4 nanoparticles. In addition, this hierarchical structure of MXene@FeIn2S4 can effectively restrain the accumulation of MXene to guarantee the maximized exposure of redox active sites into the electrolyte, and simultaneously relieve the volume expansion in the repeated discharging/charging processes. The MXene@FeIn2S4 displays outstanding rate capability (448.2 mAh g-1 at 5 A g-1) and stable long cycling performance (428.1 mAh g-1 at 2 A g-1 after 200 cycles). Moreover, the Nay-In6S7 phase detected by ex-situ XRD and XPS characterization may be regarded as a "buffer" to maintain the stability of the Fe-based components and enhance the reversibility of the electrochemical reaction. This work confirms the practicability of constructing the hierarchical structure bimetallic sulfides with the promising electrochemical performance.

Hetero-structural and hetero-interfacial engineering of MXene@Bi2S3/Mo7S8 hybrid for advanced sodium/potassium-ion batteries

Herein, heterogeneous bimetallic sulfides Bi2S3/Mo7S8 nanoparticles anchored on MXene (Ti3C2Tx) nanosheets (MXene@Bi2S3/Mo7S8) were prepared through a solvothermal process and subsequent chemical vapor deposition process. Benefiting from the heterogeneous structure between Bi2S3 and Mo7S8 and the high conductivity of the Ti3C2Tx nanosheets, the Na+ diffusion barrier and charge transfer resistance of this electrode are effectively decreased. Simultaneously, the hierarchical architectures of Bi2S3/Mo7S8 and Ti3C2Tx not only effectively inhibit the re-stacking of MXene and the agglomeration of bimetallic sulfides nanoparticles, but also dramatically relieve the volume expansion during the periodic charge/discharge processes. As a result, the MXene@Bi2S3/Mo7S8 heterostructure demonstrated remarkable rate capability (474.9 mAh/g at 5.0 A/g) and outstanding cycling stability (427.3 mAh/g after 1400 cycles at 1.0 A/g) for sodium ion battery. The Na+ storage mechanism and the multiple-step phase transition in the heterostructures are further clarified by the ex-situ XRD and XPS characterizations. This study paves a new way to design and exploit conversion/alloying type anodes of sodium ion batteries with hierarchical heterogeneous architecture and high-performance electrochemical properties.

Tuning oxygen release of sodium-ion layered oxide cathode through synergistic surface coating and doping

Layered transition metal oxides have the greatest potential for commercial application as cathode materials for sodium-ion batteries. However, transition metal oxides inevitably undergo an irreversible oxygen loss process during cycling, which leads to structural changes in the material and ultimately to severe capacity degradation. In this work, using density function theory (DFT) calculations, the Ni-O bond is revealed to be the weakest of the M-O bonds, which may lead to structural failure. Herein, the synergistic surface CeO2 modification and the trace doping of Ce elements stimulate oxygen redox and improve its reversibility, thus improving the structural stability and electrochemical performance of the material. Theoretical calculations prove that Na0.67Mn0.7Ni0.2Co0.1O2 (MNC) obtains electrons from CeO2, avoiding destruction of the Ni-O bond by over-energy released during the charging process and inhibiting oxygen loss. The capacity retention was 77.37% for 200 cycles at 500 mA g-1, compared to 33.84% for the unmodified Na0.67Mn0.7Ni0.2Co0.1O2. Overall, the present work demonstrates that the synergistic effect of surface coating and doping is an effective strategy for realizing tuning oxygen release and high electrochemical performance.

Co quantum dots embedded in modified montmorillonite loaded with graphitized carbon as an ultra-stable anode material for sodium-ion battery

Carbonaceous materials are competitive anodes in sodium-ion batteries (SIBs) due to their advantages, such as low cost, abundant active sites, and porosity. However, this type of material still suffers from slow rate capability and low capacity, which greatly hinders its application. In this work, the biomass-derived carbon is optimized based on a layered montmorillonite (Mt) skeleton and the cobalt quantum dots (Co QDs). A three-dimensional (3D) combination, specifically a 3D flower-like structure, of 0D material (Co QDs) and a two-dimensional (2D) material (Mt) has been achieved. The optimization and local limited effects of the Co QDs on the electronic properties have been demonstrated by density functional theory (DFT). The metallic Co QDs and carbon could form a Mott-Schottky junction, enhancing the conductivity and Na+ adsorption. Due to the synergetic improvement of structure and conductivity, the stripped Mt embedded with Co QDs loaded with nitrogen doped carbon (FMt@Co-NC) shows ultra-stable cycle stability (99.12% retention after 10,000 cycles at 10 A/g). This is the first time that Mt has been employed in high performance SIBs, which incubates a grand blueprint for effectively utilizing similar inactive energy-storage materials, through a simple and reliable approach.

A thermodynamically stable O2-type cathode with reversible O2-P2 phase transition for advanced sodium-ion batteries

Low-cost sodium-ion batteries (SIBs) have shown very promise in the applications of renewable energy and low-speed electric vehicles. The development of a new O2-type cathode in SIBs is very challenging in that this compound is only stable as an intermediate product of P2-type oxides during redox reactions. Here, we report a thermodynamically stable O2-type cathode obtained by Na/Li ion exchange from P2-type oxide in a binary molten salt system. It is demonstrated that the as-prepared O2-type cathode exhibits a highly reversible O2-P2 phase transition during Na+ de-intercalation. The unusual O2-P2 transition has a low volume change of ∼11%, much lower than that of 23.2% for P2-O2 transformation in the P2-type cathode. The lowered lattice volume change of this O2-type cathode gives rise to superior structural stability upon cycling. Therefore, the O2-type cathode possesses a reversible capacity of about 100 mAh/g with a good capacity retention of 87.3% even after 300 cycles at 1C, indicating outstanding long-term cycling stability. These achievements will promote the development new class of cathode materials with high capacity and structural stability for advanced SIBs.

NbO2 a Highly Stable, Ultrafast Anode Material for Li- and Na-Ion Batteries

Anode materials with fast charging capabilities and stability are critical for realizing next-generation Li-ion batteries (LIBs) and Na-ion batteries (SIBs). The present work employs a simple synthetic strategy to obtain NbO2 and studies its applications as an anode for LIB and SIB. In the case of the LIB, it exhibited a specific capacity of 344 mAh g-1 at 100 mA g-1. It also demonstrated remarkable stability over 1000 cycles, with 92% capacity retention. Additionally, it showed a unique fast charging capability, which takes 30 s to reach a specific capacity of 83 mAh g-1. For the SIB, NbO2 exhibited a specific capacity of 244 mAh g-1 at 50 mA g-1 and showed 70% capacity retention after 500 cycles. Furthermore, detailed density functional theory reveals that various factors like bulk and surface charging processes, lower ion diffusion energy barriers, and superior electronic conductivity of NbO2 are responsible for the observed battery performances.

Revealing the structural chemistry in Na6-2xFex(SO4)3 (1.5 ≤ x ≤ 2.0) for low-cost and high-performance sodium-ion batteries

Fe-based polyanionic sulfate materials are one of the most promising candidates for large-scale applications in sodium-ion batteries due to their low cost and excellent electrochemical performance. Although great achievements have been gained on a series of Na6-2xFex(SO4)3 (NFSO-x, 1.5 ≤ x ≤ 2.0) materials such as Na2Fe2(SO4)3, Na2Fe1.5(SO4)3, and Na2.4Fe1.8(SO4)3 for sodium storage, the phase and structure characteristics on these NFSO-x are still controversial, making it difficult to achieve phase-pure materials with optimal electrochemical properties. Herein, six NFSO-x samples with varied x are investigated via both experimental methods and density functional theory calculations to analyze the phase and structure properties. It reveals that a pure phase exists in the 1.6 ≤ x ≤ 1.7 region of the NFSO-x, and part of Na ions tend to occupy Fe sites to form more stable frameworks. The NFSO-1.7 exhibits the best electrochemical performance among the NFSO-x samples, delivering a high discharge capacity (104.5 mAh g-1 at 0.1 C, close to its theoretical capacity of 105 mAh g-1), excellent rate performance (81.5 mAh g-1 at 30 C), and remarkable cycle stability over 10,000 cycles with high-capacity retention of 72.4%. We believe that the results are useful to clarify the phase and structure characteristics of polyanionic materials to promote their application for large-scale energy storage.

Enhancing High-Capacity and High-Rate Sodium-Ion Storage through Synergistic N,S Dual Doping of Hard Carbon

Hard carbon, as the most promising commercial anode materials of sodium-ion batteries (SIBs), has suffered from the coupling limitations on initial Coulombic efficiency (ICE), capacity, and rate capability. Herein, to break such coupling limitations, sulfur-rich nitrogen-doped carbon nanomaterials (S-NC) were synthesized by a synergistic modification strategy, including structure/morphology regulation and dual heteroatom doping. The small specific surface area of S-NC is beneficial for inhibiting excessive growth of solid electrolyte interphase (SEI) film and irreversible interfacial reaction. The covalent S can serve as active electrochemical sites by Faradaic reactions and provide extra capacity. Benefit by N, S co-doping, S-NC shows large interlayer spacing, high defects, good electronic conductivity, strong ion adsorption performance, and fast Na+ ion transport, which combined with a more significant pore volume result in speedier reaction kinetics. Hence, S-NC possesses a high reversible specific capacity of 464.7 mAh g-1 at 0.1 A g-1 with a high ICE of 50.7%, excellent rate capability (209.8 mAh g-1 at 10.0 A g-1 ), and superb long-cycle capability delivering a capacity of 229.0 mAh g-1 (85% retention) after 1800 cycles at 5.0 A g-1 .

Advances in Mn-Based Electrode Materials for Aqueous Sodium-Ion Batteries

Aqueous sodium-ion batteries have attracted extensive attention for large-scale energy storage applications, due to abundant sodium resources, low cost, intrinsic safety of aqueous electrolytes and eco-friendliness. The electrochemical performance of aqueous sodium-ion batteries is affected by the properties of electrode materials and electrolytes. Among various electrode materials, Mn-based electrode materials have attracted tremendous attention because of the abundance of Mn, low cost, nontoxicity, eco-friendliness and interesting electrochemical performance. Aqueous electrolytes having narrow electrochemical window also affect the electrochemical performance of Mn-based electrode materials. In this review, we introduce systematically Mn-based electrode materials for aqueous sodium-ion batteries from cathode and anode materials and offer a comprehensive overview about their recent development. These Mn-based materials include oxides, Prussian blue analogues and polyanion compounds. We summarize and discuss the composition, crystal structure, morphology and electrochemical properties of Mn-based electrode materials. The improvement methods based on electrolyte optimization, element doping or substitution, optimization of morphology and carbon modification are highlighted. The perspectives of Mn-based electrode materials for future studies are also provided. We believe this review is important and helpful to explore and apply Mn-based electrode materials in aqueous sodium-ion batteries.

The applications of solid-state NMR and MRI techniques in the study of rechargeable sodium-ion batteries

In order to develop new electrode and electrolyte materials for advanced sodium-ion batteries (SIBs), it is crucial to understand a number of fundamental issues. These include the compositions of the bulk and interface, the structures of the materials used, and the electrochemical reactions in the batteries. Solid-state NMR (SS-NMR) has unique advantages in characterizing the local or microstructure of solid electrode/electrolyte materials and their interfaces-one such advantage is that these are determined in a noninvasive and nondestructive manner at the atomic level. In this review, we provide a survey of the recent advances in the understanding of the fundamental issues of SIBs using advanced NMR techniques. First, we summarize the applications of SS-NMR in characterizing electrode material structures and solid electrolyte interfaces (SEI). In particular, we elucidate the key role of in-situ NMR/MRI in revealing the complex reactions and degradation mechanisms of SIBs. Next, the characteristics and shortcomings of SS-NMR and MRI techniques in SIBs are also discussed in comparison to similar Li-ion batteries. Finally, an overview of SS-NMR and MRI techniques for sodium batteries are briefly discussed and presented.