Surface molecularly imprinted polymer/covalent organic framework/silica composite material with specific recognition ability and excellent chromatographic performance

Facing with the difficulty of specific chromatographic separation of nucleoside drugs, this study prepared a surface molecularly imprinted polymer (SMIP) modified covalent organic framework (COF) coated silica stationary phase based on the specificity of molecular imprinting technology and the powerful chromatographic separation performance of COF. This novel SMIP-COF@SiO2 stationary phase can not only specifically identify template molecule and structural analogs, but can also be used to separate multiple types of analytes, such as B vitamins, sulfonamides, alkylbenzenes, phenyl ketones, polycyclic aromatic hydrocarbons and environmental endocrine disruptors, which satisfies the need for complex sample separation. Various retention mechanisms have been investigated and multiple interactions between the SMIP-COF@SiO2 stationary phase and the analytes are discovered. The chromatographic performance of SMIP-COF@SiO2 is far superior to that of the SMIP@SiO2 and COF@SiO2. Furthermore, the SMIP-COF@SiO2 stationary phase can be successfully used to analyze polycyclic aromatic hydrocarbons in the environmental water sample and detect whitening ingredient in skincare product, indicating its great potential for application in various fields.

Molecularly imprinted polymers-isolated AuNP-enhanced CdTe QD fluorescence sensor for selective and sensitive oxytetracycline detection in real water samples

A molecularly imprinted polymers (MIPs)-isolated AuNP-enhanced fluorescence sensor, AuNP@MIPs-CdTe QDs, was developed for highly sensitive and selective detection of oxytetracycline (OTC) in aqueous medium. The developed sensor combined the advantages of strong fluorescence signal of metal-enhanced fluorescence (MEF), high selectivity of MIPs, and stability of CdTe QDs. The MIPs shell with specific recognition served as an isolation layer to adjust the distance between AuNP and CdTe QDs to optimize the MEF system. The sensor demonstrated the detection limit as low as 5.22 nM (2.40 μg/L) for a concentration range of 0.1-3.0 μM OTC and good recovery rates of 96.0-103.0% in real water samples. In addition, high specificity recognition for OTC over its analogs was achieved with an imprinting factor of 6.10. Molecular dynamics (MD) simulation was utilized to simulate the polymerization process of MIPs and revealed H-bond formation as the mainly binding sites of APTES and OTC, and finite-difference time-domain (FDTD) analysis was employed to obtain the distribution of electromagnetic field (EM) for AuNP@MIPs-CdTe QDs. The experimental results combined with theoretical analyses not only provided a novel MIP-isolated MEF sensor with excellent detection performance for OTC but also established a theoretical basis for the development of a new generation of sensors.

Surface molecularly imprinted-based matrix-assisted laser desorption/ionization time-of-flight mass spectrometry for highly selective and sensitive direct analysis of paraquat in complicated samples

Herein, a novel surface molecularly imprinted-based matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (SMI-MALDI-TOF MS) method for direct target paraquat (PQ) analysis in complicated samples is reported. Notably, a captured analyte-imprinted material can be directly detected via MALDI-TOF MS by using imprinted material as nanomatrix. Using this strategy, the molecular specific affinity performance of surface molecularly imprinted polymers (SMIPs) and the high-sensitivity detection capability of MALDI-TOF MS was integrated. The introduction of SMI endowed the nanomatrix with the capacity for rebinding the target analyte and ensuring specificity, prevented the interfering organic matrix, and enhanced the analyzing sensitivity. By using paraquat (PQ) as a template, dopamine as a monomer, and covalent organic frameworks with a carboxyl group (C-COFs) as a substrate, polydopamine (PDA) was decorated on C-COFs via a simple self-assembly procedure to generate an analyte-based surface molecularly imprinted polymer (C-COF@PDA-SMIP), which served the dual function of SMIP capturing the target analytes and high-efficiency ionization. Thus, a reliable MALDI-TOF MS detection PQ with high selectivity and sensitivity as well as an interference-free background was achieved. The synthesis and enrichment conditions of C-COF@PDA-SMIPs were optimized, and its structure and property were characterized. Under optimal experimental conditions, the proposed method achieved highly selective and ultrasensitive detection of PQ from 5 to 500 pg mL^-1, and the limit of detection was as low as 0.8 pg mL^-1, which is at least three orders of magnitude lower than that achieved without enrichment. In addition, the specificity of the proposed method was superior to that of C-COFs and nonimprinted polymers. Moreover, this method exhibited reproducibility, stability, and high salt tolerance. Lastly, the practical applicability of the method was successfully verified by analyzing complicated samples, such as grass and orange.

A SiO2@MIP electrochemical sensor based on MWCNTs and AuNPs for highly sensitive and selective recognition and detection of dibutyl phthalate

A molecularly imprinted sensor for highly sensitive and selective determination of dibutyl phthalate (DBP) was fabricated by combining multi-walled carbon nanotubes (MWCNTs) and Au nanoparticles (AuNPs) with surface molecularly imprinted polymer (SMIPs). The MWCNTs and AuNPs were designed to modify the electrode surface to accelerate the electron transfer rate and enhance the chemical stability. SMIPs were synthesized using SiO₂ microspheres as carriers. By loading SMIPs capable of identifying DBP on the surface of modified electrodes of MWCNTs and AuNPs, an electrochemical sensor for detecting DBP was successfully constructed. After optimizing the experimental conditions, the modified electrode SiO₂-COOH@MIP/AuNPs/MWCNTs/GCE can recognize DBP in the range of 10^-7g L^-1 to 10^-2g L^-1, and the detection limit achieved to 5.09 × 10^-9 g L^-1 (S/N = 3). The results demonstrate that the proposed MIP electrochemical sensor may be a promising candidate electrochemical strategy for detecting DBP in complex samples.

A novel surface imprinted resin for the selective removal of metal-complexed dyes from aqueous solution in batch experiments: ACB GGN as a representative contaminant

Metal-complexed dyes are harmful to the environment and human health because they contain heavy metals and complex organic ligands. It is difficult to separate and recover these dyes from wastewater owing to their complex components and poor selectivity of common adsorbents. In this study, a novel surface molecularly imprinted polymer (SMIP) was prepared using 4-vinyl pyridine as the functional monomer and polystyrene resin as the carrier. SMIP showed better adsorption performance than non-imprinted polymer (SNIP) in the whole pH range with the best adsorption capacity at pH 1.5. The correlation coefficients (R²) fitted by Langmuir and Temkin models were greater than 0.97, and the adsorption was a spontaneous exothermic process. The pseudo-second-order and Elovich models fitted the adsorption kinetic curves well. The adsorption capacity of SMIP was approximately 20% higher than that of SNIP in the salt concentration ranging from 2 to 80 mg/L. In selective adsorption experiments, the relative selectivity coefficients (I) of SMIP for competitors were all greater than 2.41, and the Cr (Ⅲ) components of ACB GGN played a more important role in the recognition performance of SMIP than the sulfonic groups. Adsorption mechanism tests revealed that although the adsorption of ACB GGN by SMIP mainly relied on electrostatic attraction, hydrophobic interactions, π-π conjugation, and Cr (Ⅲ) coordination were also involved. These results show that SMIP has excellent selective adsorption properties for ACB GGN and a promising application potential in the treatment of metal-complexed dye wastewater.

Reasonable design and sifting of microporous carbon nanosphere-based surface molecularly imprinted polymer for selective removal of phenol from wastewater

Highly selective surface molecularly imprinted polymer (SMIP) was prepared on glucose-derived microporous carbon nanospheres (GMCNs) by surface molecular imprinting technology for the removal of phenol from wastewater. GMCNs with rich pore structure and surface oxygenic functional groups were adopted as support materials, on which the active layers were constructed by grafting silane coupling agent 3-(methacryloyloxy) propyltrimethoxysilane. Then with phenol as template molecule, different types and amounts of functional monomer (including methacrylic acid and 4-vinylpyridine (4-VP)) were screened for optimizing imprinting conditions suitable for phenol adsorption, and a series of SMIP was obtained through crosslinking polymerization. The adsorption behaviors of SMIP were evaluated by UV spectrophotometry. The results show that, when 4-VP is used as functional monomer, the resultant 4-VP/SMIP exhibites an excellent adsorption capacity of 85.72 mg g^-1. The relative selectivity factor for phenol against hydroquinone, p-nitrophenol and p-tert-butylphenol is 8.38, 7.96 and 6.67, respectively, indicating outstanding adsorption capacity and selectivity of 4-VP/SMIP. The pseudo-second-order model and Langmuir‒Freundlich model fit better than other models for the adsorption of phenol. 4-VP/SMIP is promising for selective removal and enrichment recovery towards phenol in wastewater.

The development of a new optical sensor based on the Mn doped ZnS quantum dots modified with the molecularly imprinted polymers for sensitive recognition of florfenicol

The Mn doped ZnS quantum dots (Mn:ZnS QDs) capped with the florfenicol molecularly imprinted polymer (Mn:ZnS QDs@MIP) were prepared via the sol-gel surface imprinting approach using 3-aminopropyltriethoxysilane (APTES) as the functional monomer and tetraethoxysilane (TEOS) as the cross-linker for the optosensing of the florfenicol. Transmission electron microscopy (TEM), X-ray diffractometer, IR spectroscopy, UV-Vis absorption spectrophotometry, and spectrofluorometry were used to elucidate the formation, morphology, and identification of the products. To illustrate the usefulness of the new imprinted material, the non-imprinted coated Mn:ZnS QDs (Mn:ZnS QDs@NIP) were synthesized without the presence of the florfenicol. It was revealed that the fluorescence (FL) intensity of the Mn:ZnS QDs@MIP increased with increasing the FF concentration. Under the optimal conditions, changes in the FL intensity in the presence of the target molecule showed a linear response in the concentration range of 30-700 μmol L(-1) with a detection limit of 24 μmol L(-1). The developed method was finally applied successfully to the determination of FF in different meat samples with satisfactory recoveries.

Detection of λ-cyhalothrin by a core-shell spherical SiO2-based surface thin fluorescent molecularly imprinted polymer film

A fluorescent core-shell molecularly imprinted polymer based on the surface of SiO2 beads was synthesized and its application in the fluorescence detection of ultra-trace λ-cyhalothrin (LC) was investigated. The shell was prepared by copolymerization of acrylamide with allyl fluorescein in the presence of LC to form recognition sites. The experimental results showed that the thin fluorescent molecularly imprinted polymer (FMIP) film exhibited better selective recognition ability than fluorescent molecularly non-imprinted polymer (FNIP). A new nonlinear relationship between quenching rate and concentration was found in this work. In addition, the nonlinear relationship allowed a lower concentration range of 0-5.0 nM to be described by the Stern-Volmer equation with a correlation coefficient of 0.9929. The experiment results revealed that the SiO2@FMIP was satisfactory as a recognition element for determination of LC in soda water samples. Therefore this study demonstrated the potential of MIP for the recognition and detection of LC in food.

A novel core-shell magnetic nano-sorbent with surface molecularly imprinted polymer coating for the selective solid phase extraction of dimetridazole

A novel core-shell magnetic nano-sorbent with surface molecularly-imprinted polymer coating was prepared via a sol-gel process. Methyltrimethoxysilane and 3-aminopropyltriethoxysilane were used as functional monomers, tetraethyl orthosilicate as cross-linker, and Al(3+) as dopant to generate Lewis acid sites in the silica matrix for the metal coordinate interactions with the template dimetridazole (DMZ). The ratios of the monomers, the dopant, and the cross-linker, were optimised by a OA9 (3(4)) orthogonal array design. The resultant sorbent was characterised by scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, powder X-ray diffraction, and magnetometry. The binding performances of the sorbent were evaluated by static, kinetic and selective adsorption experiments. The nano-sorbent was successfully applied to solid phase extraction followed by spectrophotometric determination of DMZ in real samples. Spiked recoveries ranged from 90.33% to 106.20% for egg, milk powder, and pig feed samples, with relative standard deviations of less than 4.54%.