Inhibition Effect of Phosphorus Poisoning on the Dynamics and Redox of Cu Active Sites in a Cu-SSZ-13 NH3-SCR Catalyst for NOx Reduction

Phosphorus (P) stemming from biodiesel and/or lubricant oil additives is unavoidable in real diesel exhausts and deactivates gradually the Cu-SSZ-13 zeolite catalyst for ammonia-assisted selective catalytic NO_x reduction (NH₃-SCR). Here, the deactivation mechanism of Cu-SSZ-13 by P-poisoning was investigated by ex situ examination of the structural changes and by in situ probing the dynamics and redox of Cu active sites via a combination of impedance spectroscopy, diffuse reflection infrared Fourier transform spectroscopy, and ultraviolet-visible spectroscopy. We unveiled that strong interactions between Cu and P led to not only a loss of Cu active sites for catalytic turnovers but also a restricted dynamic motion of Cu species during low-temperature NH₃-SCR catalysis. Furthermore, the Cu^II ↔ Cu^I redox cycling of Cu sites, especially the Cu^I → Cu^II reoxidation half-cycle, was significantly inhibited, which can be attributed to the restricted Cu motion by P-poisoning disabling the formation of key dimeric Cu intermediates. As a result, the NH₃-SCR activity at low temperatures (200 °C and below) decreased slightly for the mildly poisoned Cu-SSZ-13 and considerably for the severely poisoned Cu-SSZ-13.

Combined Spatially Resolved Characterization of Antireflection and Antisoiling Coatings for PV Module Glass

Characterization of photovoltaic (PV) module materials throughout different stages of service life is crucial to understanding and improving the durability of these materials. Currently the large-scale of PV modules (>1 m²) is imbalanced with the small-scale of most materials characterization tools (≤1 cm²). Furthermore, understanding degradation mechanisms often requires a combination of multiple characterization techniques. Here, we present adaptations of three standard materials characterization techniques to enable mapping characterization over moderate sample areas (≥25 cm²). Contact angle, ellipsometry, and UV-vis spectroscopy are each adapted and demonstrated on two representative samples: a commercial multifunctional coating for PV glass and an oxide combinatorial sample library. Best practices are discussed for adapting characterization techniques for large-area mapping and combining mapping information from multiple techniques.

Defect Creation in Surface-Mounted Metal-Organic Framework Thin Films

Defect engineering is a strategy for tailoring the properties of metal-organic frameworks (MOFs). Plenty of efforts have been devoted to study the defect chemistry and structures of bulk MOFs; however, the reported example of a defect-engineered surface-mounted MOF (SURMOF) thin film is rare. In this work, defects were incorporated in SURMOF thin films by using defect-generating linkers and taking advantage of the liquid-phase stepwise epitaxial layer-by-layer growth (LBL). Two methods based on the LBL, named mixing method and alternating method, are proposed for incorporating defects in the prototypical SURMOF HKUST-1 by partially substituting the parent H₃btc (benzene-1,3,5-tricarboxylic acid) linker with a set of defect-generating linkers H₂ip (isophthalic acid), H₂OH-ip (5-hydroxyisophthalic acid), and H₂pydc (3,5-pyridinedicarboxylic acid). The crystallinity and phase purity of the obtained "defected" SURMOFs were confirmed by X-ray diffraction, infrared reflection absorption spectroscopy, and Raman spectroscopy. The incorporation of the defect-generating linkers and the types of induced defects were characterized by ultraviolet-visible spectroscopy, time-of-flight secondary ion mass spectrometry, methanol adsorption, scanning electron microscopy, and ¹H nuclear magnetic resonance spectroscopy (after digestion of the samples). These two methods provide avenues for controlling the defect formation in MOF thin films.

Online Monitoring of Solutions Within Microfluidic Chips: Simultaneous Raman and UV-Vis Absorption Spectroscopies

Microfluidics is an appealing analytical tool in the global effort to close the nuclear fuel cycle. Using a microfluidic chip permits the analysis of greatly reduced sample volumes compared to what is necessary for traditional analytical methods. There is a commensurate reduction in disposal volume and cost. The development of novel sensors is necessary to take full advantage of the microchip configuration, where optical-spectroscopy-based approaches offer a powerful route to characterize chemical composition. This study uses simultaneously applied UV-vis and micro-Raman spectroscopies adapted to function on the microscale to analyze in situ both the Nd³⁺ (UV-vis-active) and HNO₃ (Raman-active) concentrations in the same sample. An adjustable translation platform was designed to hold the micro-Raman probe above and perpendicular to the chip face and the UV-vis probe in the plane of the chip. These complimentary spectral techniques when processed through multivariate partial least-squares (PLS) models gave an accurate picture of the widely varying solution concentrations as a function of time for each solution component. Solution matrix effects can drastically alter analyte signatures as measured by both UV-vis absorbance and Raman spectroscopy. PLS methods successfully modeled these spectral changes and accurately measured concentrations of components of interest within the microfluidic chip.

Silver Nanoparticle Detection in Real-World Environments via Particle Impact Electrochemistry

Silver nanoparticles (AgNPs) suspended in bottled mineral water and in tap water were successfully detected via the nanoimpact method without the deliberate addition of electrolyte. The recorded spike charge was used to indicate the stability of the AgNPs in their suspensions. It is found that the AgNPs largely agglomerated in potable water within the first 20 min. Addition of high concentrations of citrate (>2 mM) improved the stability of the AgNPs and enabled the detection and sizing of the AgNPs monomers in these media. Aging of the potable water suspensions was independently confirmed via UV-vis spectroscopy, validating the electrochemical method for detecting nanoparticles in real-world media.

Improvement of the Color Stability of Cyanidin-3-glucoside by Fatty Acid Enzymatic Acylation

Anthocyanins are water-soluble pigments with limited application in lipophilic matrices such as lipid-based foods and cosmetic formulations. In this work, the liposolubility improvement of cyanidin-3-glucoside (cy3glc) was performed by enzymatic esterification with saturated fatty acids with variable chain lengths, and their thermostabilities were evaluated at different pH values in a lipophilic medium (an aqueous sodium dodecyl sulfate solution) by means of UV-vis spectroscopy. Overall, lipophilic cy3glc derivatives showed improved color stability and lowered sensitivity to thermal degradation than nonmodified cy3glc in an SDS micellar solution between pH 3 and 7.

Visible-Light-Driven Photocatalysts of Perfluorinated Silica-Based Fluorescent Carbon Dot/TiO2 for Tunable Hydrophilic-Hydrophobic Surfaces

In this study, a new hydrophilic-hydrophobic transition surface was designed via visible-light-induced photocatalytic perfluorinated silica-based fluorescent carbon nanoparticles (FNPs)/TiO₂. Perfluorinated silica-polydopamine hybrid FNPs (f-FNPs) were easily fabricated by carbonization in an emulsion system consisting of tetraethyl orthosilicate and dopamine, followed by the deposition of TiO₂ on f-FNPs, which demonstrated the reversal from hydrophobic to hydrophilic nature during successful photocatalysis. The synergistic effect of silica-carbon and the deposited TiO₂ NPs led to the decomposition of methylene blue under UV and visible light irradiation, demonstrating that FNPs/TiO₂ sustains photocatalytic activity. The profound contact angle with the catalytic kinetics curve and precise morphology and extension of cells detach antifouling exceptionally unrestricted the synergistic effect of silica-carbon on TiO₂ NPs on a coated paper substrate. Given the interest in the manipulation of hydrophobicity and hydrophilicity, this study can serve as a guideline for the fabrication of photocatalytic surfaces where water spreads completely.

Effect of Temperature on Acidity and Hydration Equilibrium Constants of Delphinidin-3-O- and Cyanidin-3-O-sambubioside Calculated from Uni- and Multiwavelength Spectroscopic Data

Delphinidin-3-O-sambubioside and cyanidin-3-O-sambubioside are the main anthocyanins of Hibiscus sabdariffa calyces, traditionally used to make a bright red beverage by decoction in water. At natural pH, these anthocyanins are mainly in their flavylium form (red) in equilibrium with the quinonoid base (purple) and the hemiketal (colorless). For the first time, their acidity and hydration equilibrium constants were obtained from a pH-jump method followed by UV-vis spectroscopy as a function of temperature from 4 to 37 °C. Equilibrium constant determination was also performed by multivariate curve resolution (MCR). Acidity and hydration constants of cyanidin-3-O-sambubioside at 25 °C were 4.12 × 10(-5) and 7.74 × 10(-4), respectively, and were significantly higher for delphinidin-3-O-sambubioside (4.95 × 10(-5) and 1.21 × 10(-3), respectively). MCR enabled the obtaining of concentration and spectrum of each form but led to overestimated values for the equilibrium constants. However, both methods showed that formations of the quinonoid base and hemiketal were endothermic reactions. Equilibrium constants of anthocyanins in the hibiscus extract showed comparable values as for the isolated anthocyanins.

Air-Exposure-Induced Gas-Molecule Incorporation into Spiro-MeOTAD Films

Combined photoemission and charge-transport property studies of the organic hole transport material 2,2',7,7'-tetrakis(N,N-di-p-methoxyphenylamine)-9,9'-spirobifluorene (spiro-MeOTAD) under air exposure and controlled environments of O2, H2O + N2, and N2 (1 atm and under dark conditions) reveal the incorporation of gas molecules causing a decrease in charge mobility. Ultraviolet photoelectron spectroscopy shows the Fermi level shifts toward the highest occupied molecular orbital of spiro-MeOTAD when exposed to air, O2, and H2O resembling p-type doping. However, no traces of oxidized spiro-MeOTAD(+) are observed by X-ray photoelectron spectroscopy (XPS) and UV-visible spectroscopy. The charge-transport properties were investigated by fabricating organic field-effect transistors with the 10 nm active layer at the semiconductor-insulator interface exposed to different gases. The hole mobility decreases substantially upon exposure to air, O2, and H2O. In the case of N2, XPS reveals the incorporation of N2 molecules into the film, but the decrease in the hole mobility is much smaller.

Effect of pH on the complexation of kaempferol-4'-glucoside with three β-cyclodextrin derivatives: isothermal titration calorimetry and spectroscopy study

The utilization of kaempferol and its glycosides in food and pharmaceutical industries could be improved by the formation of inclusion complexes with cyclodextrins at different pH. This study explores the complexation of kaempferol-4'-glucoside with sulfobutyl ether-β-cyclodextrin (SBE-β-CD), hydroxypropyl-β-cyclodextrin (HP-β-CD), and methylated-β-cyclodextrin (M-β-CD) in phosphate buffer solutions of different pH using isothermal titration calorimetry, UV-vis absorption and proton nuclear magnetic resonance spectroscopy at 298.2 K. Experimental results showed that kaempferol-4'-glucoside binds with the three β- cyclodextrins in the same 1:1 stoichiometry. The rank order of stability constants is SBE-β-CD > HP-β-CD > M-β-CD at the same pH level and pH 6.0 > pH 7.4 > pH 9.0 for the same cyclodextrin. The binding of kaempferol-4'-glucoside with the three β-cyclodextrin derivatives is synergistically driven by enthalpy and entropy at pH 6.0 and enthalpy-driven at pH 7.4 and 9.0. The possible inclusion mode was that in the cavity of β-CD is included the planar benzopyranic-4-one part of the kaempferol-4'-glucoside.