Bell pepper derived nitrogen-doped carbon dots as a pH-modulated fluorescence switching sensor with high sensitivity for visual sensing of 4-nitrophenol

Recently, converting bio-waste into bio-asset and implementing a portable sensing instrument for pollutant monitoring has been highly desirable and challenging. Herein, biomass-derived nitrogen-doped carbon dots (CDs) are prepared hydrothermally and emit blue fluorescence (470 nm) with a high quantum yield of 23.2%. Significantly, CDs can serve as a pH-modulated fluorescence switching nano-sensor to detect 4-NP from 0.054 to 68 μM with low detection limit (LOD, 54 nM) and limit of quantification (LOQ, 181 nM) based on inner filter effect. Moreover, the satisfactory recovery of 101.8-107.5% is gained in practical sample monitoring. Furthermore, a smartphone-integrated optosensing device with CDs-based film is developed for detecting 4-NP with LOD and LOQ of 0.110 μM and 0.350 μM. Concomitantly, the practicability of this device is further validated in several crop samples with satisfactory recovery rates of 101.6-108.6%. Therefore, this work provides a reliable way and a prospective application for on-site 4-NP monitoring in food.

A label-free multicolor colorimetric and fluorescence dual mode biosensing of HIV-1 DNA based on the bifunctional NiFe2O4@UiO-66 nanozyme

Finding the DNA of the human immune deficiency virus (HIV) with simple and sensitive detection is the main challenge in early diagnosis of AIDS. Herein, two-point separation strategies based on the colorimetric and fluorescence are introduced. The naked-eye qualitative and semiquantitative colorimetric, and also accuracy fluorescence quantification of HIV-1 DNA were applied using label-free NiFe₂O₄@UiO-66 nanozyme with both functions of peroxidase-mimetic like and emitting fluorescence. The DNA probe-conjugated nanozyme is employed to hybridize a sequence of HIV-1. NiFe₂O₄@UiO-66 nanozymes catalyze the decomposition of H₂O₂ to ^•OH which can produce a remarkable fluorescent product 2-hydroxyterephthalic acid (TAOH) by the oxidation of the bridging ligand of weakly fluorescent terephthalic acid (TA). The accessibility of H₂O₂ toward confined-NiFe₂O₄ MNPs was reduced by increasing the HIV-1 target DNA concentration, resulting in the fluorescence intensity of TAOH being decreased. Meanwhile, remaining the unreacted H₂O₂ was transferred an acidic colorimetric solution containing FeSO₄ and gold nanorods (AuNRs). Increasing the amount of H₂O₂ available for longitudinal etching of AuNRs due to •OH-generating Fe⁺²-catalyzed H₂O₂ is reponsible for different colors from brownish to colorless depending on the HIV-1 target DNA concentration. The fluorescence intensity and obtained colors have offered the sensitive biosensing methods with a linear range from 0.05 to 300 and 1-200 pM, respectively with a detection limit as low as 1 fM. Our study revealed that the applied sensing assay provides a cost-effective and straightforward qualitative, semiquantitative, and sensitive quantitation visible monitoring without the necessity of high-end instruments for HIV-1 detection in a human blood plasma/serum samples.

Advanced visual sensing techniques for on-site detection of pesticide residue in water environments

Pesticide usage has increased to fulfil agricultural demand. Pesticides such as organophosphorus pesticides (OPPs) are ubiquitous in world food production. Their widespread usage has unavoidable detrimental consequences for humans, wildlife, water, and soil environments. Hence, the development of more convenient and efficient pesticide residue (PR) detection methods is of paramount importance. Visual detecting approaches have acquired a lot of interest among different sensing systems due to inherent advantages in terms of simplicity, speed, sensitivity, and eco-friendliness. Furthermore, various detections have been proven to enable real-life PR surveillance in environment water. Fluorometric (FL), colourimetric (CL), and enzyme-inhibition (EI) techniques have emerged as viable options. These sensing technologies do not need complex operating processes or specialist equipment, and the simple colour change allows for visual monitoring of the sensing result. Visual sensing techniques for on-site detection of PR in water environments are discussed in this paper. This paper further reviews prior research on the integration of CL, FL, and EI-based techniques with nanoparticles (NPs), quantum dots (QDs), and metal-organic frameworks (MOFs). Smartphone detection technologies for PRs are also reviewed. Finally, conventional methods and nanoparticle (NPs) based strategies for the detection of PRs are compared.

TiO2 Nano-test tubes as a solid visual platform for sensitive Pb2+ ion detection based on a fluorescence resonance energy transfer (FRET) process

A cost-effective, facile, and sensitive fluorescence sensing strategy for Pb²⁺ ion detection has been developed based on the fluorescence resonance energy transfer (FRET) between carbon quantum dots (CQDs) and Au nanoparticles (NPs). Glutathione (GSH)-synthesized CQDs acted as both the fluorescence donor and the sorbent to extract Pb²⁺ ions from the solution via Pb-GSH complexes. Pb²⁺ ions on CQDs reacted with -SH groups on AuNPs to generate sandwich-type Au-PdS-CQDs, leading to a dramatic decrease in the fluorescence of the CQDs. To expand the potential applications of this strategy, we constructed a sensing strategy using self-organized TiO₂ nanotube arrays (TiNTs). The high aspect ratio and transparency for light emitted from the CQDs enabled the TiNTs to serve as a sensitive solid visual platform for the highly selective detection of Pb²⁺ ions with a detection limit as low as 4.1 × 10^-8 mg mL^-1. More importantly, the long observation length combined with a small volume enabled a sample acquisition volume of only 2.1 × 10^-3 μL, which is smaller than the traditional fluorescence analysis in solution and on commercially available test paper, thus endowing this visual platform with the potential for use in single-cell diagnostics.

Porous silica and polymer monolith architectures as solid-state optical chemosensors for Hg2+ ions

We demonstrate a simple strategy to concoct a competent solid-state opto-chemosensor for the selective and sensitive visual detection of Hg²⁺ ions. The sensor fabrication involves the utilization of indigenously prepared mesoporous silica and polymer monoliths as probe anchoring templates and 8-hydroxy-7-(4-n-butylphenylazo) quinoline (HBPQ) as the chromo-ionophoric probe for Hg²⁺ sensing. Both the monoliths are designed with discrete structural and morphological features to serve as efficient host templates. The structural and surface features of the monoliths are characterized using p-XRD, TEM, SEM, SAED, EDAX, XPS, and N₂ isotherm analysis. The synergetic features of monolith structural hierarchy along with the probe's selective chelating ability enable rapid signal response and remarkable ion selectivity for Hg²⁺. The solid-state sensors evince a linear signal response from 0.6 to 150 μg/L for Hg²⁺ recognition, with superior data authenticity and replication that is preceded by an RSD value of ≤ 2.25% when tested with real water samples.Graphical abstract Mesoporous silica and polymer monolith architects hosting HBPQ probe molecules demonstrate an excellent visual sensing of ultra-trace (μg/L) Hg²⁺ in various water samples with a striking color transition from light orange to dark red upon complexation of probe with Hg²⁺. The solid-state sensors are Hg²⁺ ion selective, super-responsive, real-time applicable, and also reusable.

Construction of an effective ratiometric fluorescent sensing platform for specific and visual detection of mercury ions based on target-triggered the inhibition on inner filter effect

Sensitive and selective determination of mercury ion (Hg²⁺) is critical for human health and environmental monitoring. Herein we construct an effective ratiometric fluorescent sensing platform by combining green fluorescent polymer carbon dots (PCDs) and red fluorescent tetraphenylporphyrin tetrasulfonic acid hydrate (TPPS) for specific and visual detection of Hg²⁺. The fluorescence of PCDs can be quenched by TPPS through inner filter effect (IEF). In the presence of both Mn²⁺ and Hg²⁺, however, Hg²⁺ can expedite the complexation of TPPS and Mn²⁺, which causes the decrease in both fluorescence and absorption of TPPS, accompanied by the fluorescence recovery of PCDs due to the subdued IFE between TPPS and PCDs. Based on the change of fluorescence signal, a ratiometric fluorescent sensing platform is constructed for specific and visual detection of Hg²⁺. The proposed approach presents a fine linear range for Hg²⁺ over the range of 10-200 nM with a detection limit of 0.038 nM. Moreover, an easily distinguishable fluorescence color change from pink to green with the increase of Hg²⁺ concentration can be observed by the naked eye under a UV lamp. Such a simple and effective method shows great potential for visual sensing of Hg²⁺ in on-site and resource-limited settings.

Rapid visual sensing and quantitative identification of duck meat in adulterated beef with a lateral flow strip platform

A novel high-sensitivity authentication method has been demonstrated for the rapid visual detection of adulterated meat based on both the lateral flow strip (LFS) platform and on polymerase chain reaction (PCR). After the rapid extraction of genomic components from meat, the on-site amplification of the target DNA of adulterated duck meat is carried out with the rationally designed functional FITC- and biotin-modified primer set, thereby producing numerous double-stranded DNA (dsDNA) products dually labelled with FITC and biotin. The FITC-labelled terminal end of the products binds to the pre-immobilized FITC antibody on the test line of the strip, and the biotin-labelled terminal end binds to the streptavidin-conjugated gold nanoparticles, resulting in a visible test line on the LFS for the rapid identification of duck meat in adulterated beef. After optimization, an adulteration ratio as low as 0.05% can be easily measured, which is more sensitive than other common adulteration authentication methods and is even comparable to instrumental methods. Moreover, 22 commercial processed meat samples were tested with this new strategy, and 4 adulterated samples were successfully identified by both the classic method and our method. In essence, the present authentication method is simple in design, convenient in operation, and can be easily extended to the identification of other adulteration components just by replacing the modified primers.

Visual and sensitive fluorescent sensing for ultratrace mercury ions by perovskite quantum dots

Mercury ions sensing is an important issue for human health and environmental safety. A novel fluorescence nanosensor was designed for rapid visual detection of ultratrace mercury ions (Hg²⁺) by using CH₃NH₃PbBr₃ perovskite quantum dots (QDs) based on the surface ion-exchange mechanism. The synthesized CH₃NH₃PbBr₃ QDs can emitt intense green fluorescence with high quantum yield of 50.28%, and can be applied for Hg²⁺ sensing with the detection limit of 0.124 nM (24.87 ppt) in the range of 0 nM-100 nM. Furthermore, the interfering metal ions have no any influence on the fluorescence intensity of QDs, showing the perovskite QDs possess the high selectivity and sensitivity for Hg²⁺ detection. The sensing mechanism of perovskite QDs for Hg²⁺ is has also been investigated by XPS, EDX studies, showing Pb²⁺ on the surface of perovskite QDs has been partially replaced by Hg²⁺. Spot plate test shows that the perovskite QDs can also be used for visual detection of Hg²⁺. Our research indicated the perovskite QDs are promising candidates for the visual fluorescence detection of environmental micropollutants.