Dual-template synthesis of SFO-type aluminophosphate with enhanced water-sorption-driven cooling performance

Water-based adsorption chillers (ADC) driven by low-grade thermal energy are environment-friendly alternatives to the traditional compression ones to realize the net zero carbon target. Aluminophosphates molecular sieve (AlPOs) is an excellent material for water-based adsorption applications. However, AlPOs suffers from relatively high cost attributed to the extensive use of expensive structure direct agents (SDAs). This study employed a dual-template method, using cheap organic amine as a dual-template, to synthesize low-cost and excellent adsorbent AlPOs with SFO topology (AlPO-SFO). AlPO-SFO synthesized with dual templates shows high crystallinity, large micropore volume, excellent water uptake, and low regeneration temperature. AlPO-SFO guided by 4-dimethylaminopyridine (4-DMAPy) and diethanolamine (DEOA) molar composition of 0.4 and 0.1 exhibits large microporous volume (0.30 ml g-1), high water uptake (0.26 g g-1 at P/P0 = 0.25) and low regeneration temperature (65 °C). Importantly, this AlPO-SFO exhibits a high coefficient of performance (COP) of 0.89 for cooling at a low driven temperature of 64 °C. The additive amine providing alkaline medium ensures the practical synthesis of AlPO-SFO when expensive 4-DMAPy decreases, endowing the 42 % reduction of the raw material cost. The results provide a cheaper synthesis route of AlPO-SFO, which is conducive to its large-scale production as a distinguished adsorbent for adsorption chillers.

Water adsorption characteristic and its impact on pore structure and methane adsorption of various rank coals

Coalbed methane not only is a new clean energy source, but also has potential damage to ecological environment. Water and methane coexist in coal reservoir; understanding the adsorption of water on coal and its impact on pore structure and methane adsorption of coal is vital to evaluate the reserves and productivity of coalbed methane. In the paper, water adsorption characteristics of various rank coals are firstly investigated by ten mathematical models. The modified Dent model provides a best fit, followed by GAB and Dent models. For GAB model, the primary site adsorption is more difficult to reach saturation, and the contribution rate of the secondary site adsorption is surprisingly high at P/P₀ approaching 0, which can be attributed to the possible overestimation of GAB monolayer adsorption capacity and secondary site adsorption. Besides, the low-rank coal sample YZG2 exhibits more prominent hysteresis than middle- to high-rank coals. The low-pressure hysteresis can be attributed to the water-water interactions over the primary site and the strengthened binding forces of water molecules in the water desorption process. In contrast, the high-pressure hysteresis largely depends on pore structure of coal such as ink-bottle pores, especially for the studied sample YZG2. Besides, pore analyses by low-temperature nitrogen adsorption method show that the pre-adsorbed water has remarkable influence on micropores smaller than 10 nm, and the micropores smaller than 4 nm almost disappear for water-equilibrated coals, which is closely related to the formed water clusters and capillary water in pore throats. This finding reveals that more methane gas can only be adsorbed in the larger pores of moist coal, and provides an explanation for water weakening methane adsorption capacity.

Impact of heteroatom addition into mesoporous silica for water adsorption in the low partial pressure range

Mesoporous silicas are known to be high-performing water adsorbents in high humidity levels due to their large pore volumes. However, for low humidity conditions, these materials typically present a less expressive performance, which is a drawback for many applications. In the present report, mesoporous silica SBA-15 was functionalized with Al, Ti, Zr and Li in order to improve their performance in this condition. The influence of functionalization in porosity, morphology and acidic sites was investigated. Samples with an increased number of acidic sites and with higher microporosity when compared to pure silica were produced. This was responsible for their enhanced performance for water adsorption in low moisture conditions. Sample functionalized with zirconium in SBA-15 synthesis improved the water adsorption capacity of pure silica by three times, reaching up to 127 g kg⁻¹ at a relative pressure of 0.2 and 570 g kg⁻¹ close to saturation pressure. This sample was found to be a promising material to be applied in processes which require high adsorption capacities in both low and high water partial pressure ranges. Moreover, the understanding of the mechanisms behind the heteroatom functionalization can be applied to any silica material in order to enhance its attractiveness towards any polar molecule.

Ultrahigh water sorption on highly nitrogen doped carbonaceous materials derived from uric acid

HYPOTHESIS

Developing materials for thermally driven adsorption chillers and adsorption heat pumps is a growing research field due to the potential of these technologies to address up to 50% of the world's total energy demand. These materials must be abundant, easy to synthesize, hydrophilic, and low in cost. Bare carbon materials are hydrophobic and therefore usually not considered for these applications. However, by introducing heteroatoms and tuning their porosity, the hydrophilicity of carbonaceous networks can be increased significantly.

EXPERIMENTAL

Herein, a series of highly nitrogen doped carbonaceous materials (CNs) have been synthesized by submitting uric acid to heat treatment at different temperatures in the presence of an inorganic salt mix as solvent and pore template. The effect of the thermal treatment on the materials composition, pore network, and water sorption capability has been studied.

FINDINGS

At 800 °C, a nitrogen depleted carbonaceous material with a maximal water uptake of 1.38g_H2O g^-1 is obtained. Condensation at 750 °C creates an ultra-hydrophilic CN with a water uptake of 0.8 g_H2O g^-1 at already much lower partial pressures. While the maximum uptake is mainly ascribed to the mesopore volume of the material, the differences in hydrophilicity can be controlled by functionality.

Role of cation size on swelling pressure and free energy of mica pores

The ion exchange capacity of clay plays an important role in many industrial applications ranging from radioactive waste disposal to cosmetics. However, swelling or shrinking of clay platelets due to water and ions adsorption in the interstitial zone is also a well-known phenomenon. For their applications, it is crucial to understand the stability of these layered materials, especially after exchange of interstitial ions with surrounding ions having different properties. Here, we probed the role of cation size on swelling pressure and free energy profile. We used molecular simulations to investigate the stability of mica pore, having K⁺, Rb⁺, and Cs⁺ ions. We performed a series of grand canonical Monte Carlo simulations at various pore widths. We probed water adsorption in mica pores from which disjoining pressure, grand potential (swelling free energy), and structural properties of confined water and ions were calculated. While the behavior of these three systems is similar qualitatively because of similar hydration properties of ions, significant differences are observed at the quantitative level due to changes in the hydration structure of cations. The global minimum in swelling free energy is found to be at the smaller pore widths (first minimum) for Rb- and K-mica and at bigger pore widths (second minimum) for Cs-mica pores. We find that ±0.1 Å change in the interstitial cation size leads to a -15 to 5% change in equilibrium loading of adsorbed water and -2 to 35% change in swelling. Our thermodynamic analysis reveals an intricate interplay between enthalpic and entropic contributions caused by the structural change of water in the pores due to the hydration of interstitial cations.

Controlled drug release: On the evolution of physically entrapped drug inside the electrospun poly(lactic-co-glycolic acid) matrix

The drug loading and releasing properties of poly(lactic-co-glycolic acid) (PLGA) were approached with the application of neutron techniques. The neutron reflection (NR) study on the response of PLGA material to vapor and to bulk water revealed that the hydration of PLGA origins from the molecular compatibility between water and PLGA. Hydration is reversible with regard to the change in humidity and temperature. Capecitabine as drug was embedded in the electrospun PLGA fibers. Small angle neutron scattering (SANS) was able to disclose the domain of entrapped drug inside the fibers and trace its evolution over time when the electrospun membrane was incubated in D₂O buffer solution. The evolution of drug domains is discussed in terms of the concentration dependence, the temperature dependence, and the relevance between the drug diffusion inside the polymer matrix and the drug release out to the medium. It was observed that, at 20 °C the drug-related domains are relatively small (~ 100 Å) and relax extremely slow while at 37 °C the drug-related domains are relatively larger (~ 200 Å) and relax faster. These behaviors can be related to the glassy property of structural material. The transportation of drug through the polymer matrix relies on the global relaxation of PLGA chains. The variation of fiber diameter vs. incubation time was followed by ultra-small angle neutron scattering (USANS). The bi-phasic or tri-phasic release kinetics from a series of fibers with different drug loading (2%, 5%, 10%, 20%, 30%, 40%, 50%) were discussed based on the SANS and USANS discovery.

Thermal, hygric, and environmental performance evaluation of thermal insulation materials for their sustainable utilization in buildings

As energy use in the building sector is increasing worldwide, building materials with characteristics that save energy are becoming increasingly important; in addition, there is an emerging need for high-performance insulation materials with low thermal conductivity. However, thermal insulation should consider thermal conductivity, which is the main performance parameter, in addition to the water adsorption rate, acidity, and deformation and expansion due to drying conditions. This study evaluated the main performance of 21 insulation materials used at construction sites to objectively and clearly evaluate their overall performance, including their thermal conductivity. Thermal conductivity was measured by the heat flow meter method according to ASTM C518 and ISO 8301 standards; it was also evaluated according to the drying conditions. The water absorption rate was evaluated by ISO 2896 to ensure the sustainability and long-term thermal conductivity performance of the material. Acidity was evaluated with ASTM E861 to reduce the environmental load of the buildings and soil. The results of this study reviewed an appropriate method to measure the main performance according to the type of insulation.

Quantification and prediction of water uptake by soot deposited on ventilation filters during fire events

Soot samples from different fuels were produced in small and pilot combustion test benches at various O₂ concentrations, and were then characterized in terms of primary particle diameter, specific surface area and oxygen content/speciation. Water sorption measurements were then carried out for soot compacted into pellet form and in powder form, using both a gravimetric microbalance and a manometric analyser. Water adsorption isotherms are all found to be Type V, and reveal the central role of the specific surface area and the oxygen content of soot. A single parametrization of the second Dubinin-Serpinsky model gives a proper fit for all isotherms. To the best of our knowledge, this is the first study to provide physico-chemical parameters and water sorption results for fire soot. This enables a better description of the soot cake formed on filters during a fire, in particular in industrial confined facilities as simulated in this study. Humidity can be then explicitly considered in the same way as other parameters influencing the aeraulic resistance of soot cakes. These results can be used to improve predictions of the consequences of fires on the containment of toxic materials within industrial facilities.

IRC data for a mechanistic route starting with H2O adsorption and finishing with H2 desorption from graphene

Intrinsic reaction coordinate (IRC) data regarding the interactions of water with a carbene-like active site located at the edge of a polyaromatic hydrocarbon [1-3] has been obtained using density functional theory (DFT) and the 6-31g(d) basis set as implemented in the Gaussian 16 software [4]. The data is presented as two videos (frontal and lateral mechanism views) combining four consecutive IRC calculations corresponding to the four different transition states presented on "https://doi.org/10.1016/j.carbon.2020.01.011" [3] (Figure 6, side approach). These videos provide powerful insights on two key aspects: a) the rotational process that occurs during water adsorption and b) the hydrogen gas desorption process during water gasification of carbons.

New insights into the heat of adsorption of water, acetonitrile, and n-hexane in porous carbon with oxygen functional groups

Isosteric heat of adsorption is exquisitely sensitive to structural changes in carbon surfaces based on the energetic behavior of the interactions between adsorbates and carbon materials. We discuss the relationships between porous structures, oxygen functional groups, and heat of adsorption based on the behavior of the heat of adsorption of polar and non-polar fluids on porous carbon materials with oxygen functional groups. The porosity and functional groups of porous carbon materials were estimated from N₂ adsorption isotherms at 77 K and temperature-programmed desorption. High-resolution adsorption isotherms of water, acetonitrile (polar fluid), and n-hexane (non-polar fluid) were measured on porous carbon materials with different pore size distributions and amounts of oxygen functional groups at various temperatures. The heats of adsorption were determined by applying the Clausius-Clapeyron equation to the adsorption isotherms. The heat of adsorption curves directly reflect the effects of interactions of fluid-oxygen functional groups, fluid-basal planes of pore walls, and fluid-fluid interfaces. In particular, the heat of adsorption curve of water is very sensitive to surface oxygen functional groups. This finding indicates the possibility of estimating the relative amounts of oxygen functional groups on porous carbon materials based on the amounts of water adsorbed at specific relative pressures.

Inhibition of water adsorption into polar solid-phase microextraction materials with ultrathin polydimethylsiloxane coating for thermal desorption-gas chromatography analysis

Solid-phase microextraction (SPME) coupled with thermal desorption-gas chromatography (TD-GC) has become a powerful analysis tool for volatile organic compounds (VOCs) and semi-volatile organic compounds (SVOCs) in water samples. However, water adsorption into polar microextraction phase is usually unavoidable during the extraction process, and the burst of large amounts of water vapour during thermal desorption will cause serious problems to GC separation and detectors. Pawliszyn's group had demonstrated that the tens of micron-thick, defect-free polydimethylsiloxane (PDMS) coating could act as a perfect barrier for water adsorption and offer much better compatibility in complex matrices. However, the PDMS overcoat largely decreased the uptake rate of polar analytes into the inner sorbent. In order to quantify the effect of PDMS coating thickness on water adsorption amount and the extraction kinetics, ultrathin PDMS layer was used to coat the polar extraction phase with polyimide (PI) as a model in this work. It was surprising to find that the PDMS coating with the thickness less than one micron can decrease the water adsorption by 96%, while the extraction efficiency for polar analytes (phenolic compounds and nitroaromatic explosives) was decreased by less than 20% at the extraction time of 30 min. Moreover, the kinetic data showed that the thinner the PDMS coating was, the less the uptake rate of polar analytes into PI extraction phase decreased. Finally, polar poly (phthalazine ether sulfone ketone) (PPESK) extraction phase was also coated with ultrathin PDMS coating to verify the universality of the strategy. Generally, the water adsorption problem in polar SPME was overcome to a great extent, and the extraction efficiency of polar analytes was mainly preserved with this ultrathin PDMS coating, which could broaden the application of SPME in the environmental field.

Water as probe molecule for midgap states in nanocrystalline strontium titanate by conventional and synchronous luminescence spectroscopy under ambient conditions

Alkaline earth metal titanates are broad bandgap semiconductors with applications in electronic devices, as catalysts, photocatalysts, sorbents, and sensors. Strontium titanate SrTiO₃ is of interest in electronic devices, sensors, in the photocatalytic hydrogen generation, as catalyst and sorbent. Both photocatalysis and operation of electronic devices rely upon the pathways of relaxation of excited charge in the semiconductor, including relaxation through the midgap states. We report characterization of nanocrystalline SrTiO₃ at room temperature by "conventional" vs. synchronous luminescence spectroscopy and complementary methods. We determined energies of radiative transitions in the visible range through the two midgap states in the nanocrystalline SrTiO₃. Further, adsorption and desorption of vapor of water as "probe molecule" for midgap states in the nanocrystalline SrTiO₃ was studied, for the first time, by luminescence spectroscopy under ambient conditions. Emission of visible light from the nanocrystalline SrTiO₃ is significantly increased upon desorption of water and decreased (quenched) upon adsorption of water vapor, due to interactions with the surface midgap states.

DFT study of water adsorption on lignite molecule surface

High moisture content is a main characteristic of low-rank coal, such as lignite. Numerous oxygen containing functional groups in lignite make it represent some special properties, and these functional groups affect the adsorption mechanisms of water molecules on lignite surface. This study reports some typical water · · · lignite conformations, along with a detailed analysis of the geometry, electrostatic potential distribution, reduced density gradient of interaction, and interaction energy decomposition. The results show that water molecules tend to aggregate around functional groups, and hydrogen bonds play a dominant role in the interaction. The adsorption energy of water cluster on lignite surface is larger than that of isolated water molecule, a good linear relationship between the interaction distance and adsorption energy of layers has been found. Since water is a polar molecule, the local minima and maxima of electrostatic potential in conformations increase along with more water adsorbing on lignite surface. Reduced density gradient analysis shows that H-bonds, van der Waals interaction, and a little steric make up the interaction between water cluster and lignite molecule. In these studied conformations which mainly are H-bond complexes, electrostatic and exchange repulsion play a dominant role, whereas polarization and dispersion make relatively small contribution to the interaction. Attractive and repulsive interaction both affect the stability of water · · · lignite conformations.

Spectroscopic study of water adsorption on Li(+), TMA(+) and HDTMA(+) exchanged montmorillonite

The potential of IR and NMR spectroscopy in characterization the interaction of water with natural and organically modified montmorillonites was introduced. Organoclays were prepared from Li-saturated montmorillonite (Li-S) and tetramethylammonium (TMA) or hexadecyltrimethylammonium (HDTMA) salts. The influence of organic cation size on the water vapour uptake was examined and a comparative study with natural clay mineral was provided. The near-IR spectra confirmed the reduced water content in TMA-S and HDTMA-S. After exposure of the samples to water vapour under various relative humidities (RH) the H2O content was determined. According to the adsorption isotherms the amount of water decreased in order Li-S>TMA-S>HDTMA-S. The intensities of the 2νOH and [Formula: see text] bands, corresponding to the vibrations of H2O, gradually increased in hydrated samples. The (13)C MAS NMR and near-IR of hydrated organoclays confirmed the presence of H2O close to the cation's headgroup. NMR signals of inner -CH2- groups in HDTMA-S were also affected by hydration: the intensity of disordered gauche conformers (31.1 ppm) overtook the intensity of ordered all-trans conformers (33.0 ppm).