Enhanced selective removal of arsenic(V) using a hybrid nanoscale zirconium molybdate embedded anion exchange resin

Selective removal of trace arsenic is crucial for obtaining safe drinking water. Here, the selective adsorptive performance of arsenate (As(V)) on a hybrid ZMAE (nanoscale zirconium molybdate embedded a macroporous anion exchange resin) was examined. It was found that the As(V) adsorption efficiency of ZMAE was almost retained in the presence of competing ions (NO₃^- or SO₄^2-) up an [SO₄^2-]/[As] or [NO₃^-]/[As] ratio of 150/1, whereas that of bare AE (anion exchange resin) was negligible for [SO₄]/[As] over 15/1. In addition, the As(V) maximum adsorption capacity of ZMAE was found to be 41.2 mg/g, which is in contrast with the negligible adsorption of bare AE under sulfate-rich condition. The enhanced arsenate selectivity of ZMAE can be attributed to the excellent selectivity of ZM NPs (zirconium molybdate nanoparticles), which contributed up to 45% of the adsorption capacity of ZMAE. The behavior of ZMAE towards arsenate was compared with that towards phosphate showing similar adsorption performances between them, which indicates the similar affinity of ZMAE towards arsenate and phosphate. Finally, ZMAE examined for fixed-bed column adsorption for As(V) removal from synthetic As(V) water was effective for up to 5100 BVs, treating As(V) from 0.1 mg/L to below 0.01 mg/L (meeting the WHO guidelines).

Development of nanoscale zirconium molybdate embedded anion exchange resin for selective removal of phosphate

Development of a selective adsorbent with an enhanced removal efficiency for phosphate from wastewater is urgently needed. Here, a hybrid adsorbent of nanoscale zirconium molybdate embedded in a macroporous anion exchange resin (ZMAE) is proposed for the selective removal of phosphate. The ZMAE consists of a low agglomeration of zirconium molybdate nanoparticles (ZM NPs) dispersed within the structure of the anion exchange (AE) resin. As major results, the phosphate adsorption capacity of the ZMAE (26.1 mg-P/g) in the presence of excess sulfate (5 mM) is superior to that of the pristine AE resin (1.8 mg-P/g) although their phosphate uptake capacity was similar in the absence of sulfate and these results were supported by the high selectivity coefficient of the ZMAE toward phosphate over sulfate (S_PO4/SO4) more than 100 times compared to the pristine AE resin. This superior selective performance of the ZMAE for phosphate in the presence of sulfate ions is well explained by the role of the ZM NPs that contributed to 69% of the phosphate capacity which is based on an observation that the phosphate adsorption capacity of the ZM NPs is not affected by the presence of sulfate. In addition, the behavior of the selective phosphate removal by the ZMAE was well demonstrated by not only in the batch mode experiment with simulated Mekong river water and representative wastewater effluent but also in a column test.