Optimization of water washing for mitigation of 3-monochloropropane 1,2 diol ester in palm oil physical refining process

The presence of 3-monochloropropane-1,2 diol ester (3-MCPDE) and glycidyl ester (GE) in processed palm oils is of concern, as these oils are widely used for edible purposes. The mitigation method studied here optimizes the removal of chloride through water washing of crude palm oil (CPO), to limit the formation of 3-MCPDE. The contaminant removal obtained via washing CPO supports the quantitative findings. By utilizing 5% water in the washing step, water-soluble chlorides in CPO are removed by up to 76%, resulting in a 71% reduction of 3-MCPDE to within statutory limits. In this study, a linear correlation was developed between the chloride and the corresponding 3-MCPDE with a correlation coefficient (R2) of 0.99. Using the correlations, 1.0 mg/kg of 3-MCPDE in refined, bleached and deodorized palm oil (RBDPO) will be obtained from CPO with 1.2 mg/kg chloride with 7% wash water usage. The study also showed minor GE reduction between 7 and 11% was attained after water washing.

Determination of process contaminants 2- and 3-MCPD esters and glycidyl esters in palm-based glycerol by indirect analysis using GC-MS

Esters of 2- and 3-monochloropropanediol (2-MCPDE, 3-MCPDE) and glycidol (GE) are regarded as process contaminants that are found in refined vegetable oils and oil-based foods. Since glycerol is produced during fat splitting, saponification and biodiesel production, it is important to have methods for determining contaminants that might be formed during these processes. Due to the use of glycerol as a food additive, data on the presence of compounds of toxicological concern, including 3-MCPD, are of interest. This study focuses on modifying the indirect analysis of 2-MCPDE, 3-MCPDE and GE using GC-MS based on the AOCS Official Method Cd 29a-13, validating the modified method, and quantifying 2-MCPDE, 3-MCPDE and GE in glycerol. The AOCS Cd 29a-13 method was modified at the initial stage of sample preparation in which the targeted esters were extracted from glycerol by vortex-assisted extraction before sample analysis. This modification was performed based on the polarity of all compounds involved. The calibration functions for all analytes were fitted to linear regression with R2 above 0.99. Limits of detection (LOD) 0.02, 0.01 and 0.02 mg kg-1 were obtained for 2-MCPDE, 3-MCPDE and GE, respectively. Spiked glycerol with 3-MCPDE and 2-MCPDE (0.25, 0.51 and 1.01 mg kg-1) and GE (0.58, 1.16 and 2.32 mg kg-1) were used for recovery and precision measurements. Recoveries of 100-108%, 101-103%, and 93-99% were obtained for 2-MCPDE, 3-MCPDE and GE, respectively. Acceptable precision levels with relative standard deviations ranged from 3.3% to 8.3% were obtained for repeatability and intermediate precision. The validated method was successfully applied for the analysis of the target compounds in refined glycerol from commercial plants, which showed that 2-MCPDE, 3-MCPDE and GE levels in the analysed samples were below the detection limit.

Simultaneous mitigation of 3-monochloropropane 1,2 diol ester and glycidyl ester in edible oils: a review

The rising concern about the presence of 3-monochloropropane 1,2 diol ester (3-MCPDE) and glycidyl ester (GE) in food has prompted much research to be conducted. Some process modifications and the use of specific chemicals have been employed to mitigate both 3-MCPDE and GE. Alkalisation using NaOH, KOH, alkali metals or alkaline earth metals and post sparging with steam or ethanol and short path distillation have shown simultaneous mitigation of 51-91% in 3-MCPDE and of 13-99% in GE, both contaminants achieved below 1000 µg/kg. Some of the mitigation methods have resulted in undesirable deterioration in other parameters of the refined oil. When the processed oil is used in food processing, it results in changes to 3-MCPDE and GE. Repeated deep frying above 170 °C in the presence of NaCl and baking at 200 °C with flavouring (dried garlic and onion), resulted in increased 3-MCPDE. Repeated frying in the presence of antioxidants (TBHQ, rosemary and phenolics) decreased 3-MCPDE in processed food. The GE content in foods tends to decline with time, indicating instability of GE's epoxide ring.

Risk assessment of 3-MCPD esters and glycidyl esters from the formulas for infants and young children up to 36 months of age

Esters of 2-monochloropropane-1,2-diol (2-MCPD), 3- monochloropropane-1,2-diol (3-MCPD), and glycidol are present in infant formulas, follow-on foods and similar compositions. They arise mainly from the vegetable oil content and may cause harmful effects in consumers. The contents of these substances in formulas were determined indirectly by converting the esters to the free form, followed by derivatization and analysis by gas chromatography-tandem mass spectrometry (GC-MS/MS). The validation results demonstrate that the method had sufficient specificity and adequate accuracy. The limits of detection (LOD) and limits of quantification (LOQ) for each of 2-MCPDE, 3-MCPDE, and GE were 1.5 and 5 µg/kg, respectively. Formula intake by children up to 36 months of age was surveyed, and the data was used to assess the risks due to 3-MCPD esters (3-MCPDE) and glycidyl esters (GE). The mean exposure dose of 3-MCPDE for different age groups ranged from 0.51 to 1.13 µg/kg bw per day. The corresponding mean GE exposure ranged from 0.031 to 0.069 µg/kg bw per day. Neither mean values nor the percentile 95% values of 3-MCPDE exposure doses exceed the recommended provisional maximum tolerable daily intake (PMTDI).

Simultaneous determination of 24 congeners of 2- and 3-monochloropropanediol esters and 7 congeners of glycidyl esters using direct multi-residue analytical LC-MS/MS methods in various food matrices

Glycidyl esters (GEs) and 2- and 3-monochloropropanediol esters (MCPDEs) are emerging process-generated food contaminants known as possible carcinogens. Herein, a direct method is developed and validated for the first time to simultaneously quantify seven GEs and twenty-four MCPDE congeners of processed foods using liquid chromatography-tandem mass spectrometry in a single sequence without ester cleavage or derivatisation, thereby allowing for the simultaneous analysis of numerous food matrices with high accuracy and precision. Our results show levels of GEs varying from <LOQ to 13486 ng/g, whereas those of MCPDEs range from <LOQ to 12019 ng/g, respectively.

Stable Isotope Tracer to Reveal the Interconversion between 3-Monochloro-1,2-propanediol Ester and Glycidyl Ester during the Deodorization Process

In this study, the effects of the deodorization process on the interconversion between 3-monochloro-1,2-propanediol ester (3-MCPDE) and glycidyl ester (GE) using 3-MCPDE or GE standards containing deuterium-labeled palmitic acid (*P), oleic acid (*O), or linoleic acid (*L) were examined. Deuterium-labeled 3-MCPDE or GE was added to palm oil then deodorized at 250 °C for 20, 40, or 60 min. In the 3-MCPDE-spiked palm oil, the deuterium-labeled 3-MCPDE content decreased with deodorization time. Moreover, GE containing *P or *O was detected, but there was no GE containing *L in the 3-MCPDE-spiked palm oil. In the GE-spiked oil, GE containing *O or *L decreased with deodorization time, but the content of GE containing *P did not change over the time. Furthermore, deuterium-labeled 3-MCPDE was not detected in the GE-spiked oil. These results suggest that 3-MCPDE is converted into GE and that fatty acid species bound to 3-MCPDE or GE may affect their interconversion.

The Formation of 3-Monochloropropanediol Esters and Glycidyl Esters during Heat-Induced Processing Using an Olive-Based Edible Oil

With the prevalence of edible diacylglycerol (DAG) oil, which is beneficial to human, the generation of 3-monochloropropanediol esters (3-MCPDE) and glycidyl esters (GE) as well as the stability of physical properties during heat-induced processing still need to be explored. In this study, the experiment used olive-based edible oil with different contents of DAG (40, 60, and 80%) to make crackers and fry chicken. They were heated at 160 and 180 °C to determine the changes in 3-MCPDE and GE, the crackers’ hardness and gumminess, and the physical properties of the oil. During baking and frying, 3-MCPDE decreased, while the content of GE slightly increased with the prolonged heating duration. Finally, 3-MCPDE and GE were lower than 1.25 mg/kg and 1.00 mg/kg, respectively. The AV increased proportionally as duration increased and POV was below 0.30 g/100 g. In general, the changes in 3-MCPDE and GE were related to the heating temperature and duration, and not significantly (p > 0.05) related to the content of DAG.