A comparative study on persistence and viability of SARS-CoV-2 wild-type and omicron variant on artificially contaminated surfaces: the role of fomites

Indirect transmission of Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) has been investigated but it is still not completely understood. The present study aimed to compare the persistence and viability of the lineage B.1 and omicron BA.1 subvariant in five daily use materials to evaluate the role of fomites as possible source of infection. Artificial contamination in a first set of experimental assay on ethylene vinyl acetate (EVA), cardboard, polystyrene, aluminium and plastic were carried out. Further experiments using omicron variant on five different surfaces (glass, plexiglass, cotton, polyester and tetrapak) were also conducted. The persistence, viability on Vero E6 cell cultures and the residual infectivity of the two lineages were evaluated over 5 days post contamination (p.c.). Results showed different stability between the tested matrices. Except for cotton and polyester, where the RNA was not detectable in 24 and 48h p.c., respectively, and the virus was not viable as soon as 30 min, in the other tested surfaces both lineages RNA was detectable until 120h p.c. A rapid decay of the viral load was revealed on cardboard, more evidently for the omicron variant. Furthermore, longer stability of BA.1 was demonstrated, but showing a less severe subtotal CPE on cell monolayers than the wild-type on all the tested materials. EVA was the material that better sustained virus stability, as the virus was able to develope CPE on the cells up to 72h p.c. In conclusion, it is conceivable to speculate about the potential spread of SARS-CoV-2, albeit it is difficult to establish the real capacity to infect people through indirect contact but such these information are of fundamental importance to help to adopt the appropriate measures to mitigate the spread of SARS-CoV-2 and its variants.

Occurrence of bacteria belonging to the genus Enterococcus and Staphylococcus on inanimate surfaces of selected hospital facilities and their nosocomial significance

OBJECTIVES

This work aimed to determine the representation and resistance of bacteria belonging to the genus Staphylococcus and Enterococcus on inanimate surfaces of two selected workplaces of the University Hospital of L. Pasteur in Košice (UHLP) and to investigate their importance in the hospital environment. The men's ward of the Department of Internal Medicine (DIM) and the Department of Anaesthesiology and Intensive Care (DAIC) were chosen.

METHODS

Using sterile sampling kits, a total of 182 swabs were collected from the inanimate surfaces of both UHLP workplaces. The swabs were then transported to a microbiological laboratory and inoculated onto sterile culture media (blood agar containing 5% ram erythrocytes). After culturing (24-48 hours, in a thermostat at constant temperature 37 °C), bacterial colonies were identified by mass spectrometry on a MALDI TOF MS. Bacteria belonging to the genera Staphylococcus and Enterococcus were subsequently separated from the spectrum of identified bacteria. Nosocomial significant strains of staphylococci (Staphylococcus epidermidis, Staphylococcus haemolyticus, Staphylococcus aureus) and all isolated enterococci were subjected to susceptibility testing for selected antibiotics using the disk diffusion method - E-tests.

RESULTS

Several members of the genus Staphylococcus were identified from the inanimate surfaces of both workplaces. These were mainly coagulase-negative strains - Staphylococcus epidermidis (45), Staphylococcus capitis (34), Staphylococcus haemolyticus (20), Staphylococcus hominis (45), Staphylococcus pasteuri (2), Staphylococcus sroph (1), Staphylococcus simulans (3), and Staphylococcus warneri (4). Staphylococcus aureus strains were also identified (2). Nosocomial significant isolates were tested for susceptibility to the antibiotics cefoxitin (FOX) and oxacillin (OXA). Two members of the genus Enterococcus - Enterococcus faecium (7) and Enterococcus faecalis (8) were isolated. All strains were subject to vancomycin susceptibility testing using the disk method.

CONCLUSION

Environmental Detection of SARS-CoV-2 Virus RNA in Health Facilities in Brazil and a Systematic Review on Contamination Sources

SARS-CoV-2 environmental monitoring can track the rate of viral contamination and can be used to establish preventive measures. This study aimed to detect by RT-PCR the presence of SARS-CoV-2 from inert surface samples in public health settings with a literature review about surface contamination and its burden on spread virus. Samples were collected from health settings in Curitiba, Brazil, between July and December 2020. A literature review was conducted using PRISMA. A total of 711 environmental surface samples were collected from outpatient areas, dental units, doctors' offices, COVID-19 evaluation areas, and hospital units, of which 35 (4.9%) were positive for SARS-CoV-2 RNA. The frequency of environmental contamination was higher in primary care units than in hospital settings. The virus was detected on doctors' personal items. Remarkably, the previously disinfected dental chair samples tested positive. These findings agree with those of other studies in which SARS-CoV-2 was found on inanimate surfaces. Detection of SARS-CoV-2 RNA on surfaces in public health settings, including those not meant to treat COVID-19, indicates widespread environmental contamination. Therefore, the intensification of disinfection measures for external hospital areas may be important for controlling community COVID-19 dissemination.

Stability of SARS-CoV-2 and other coronaviruses in the environment and on common touch surfaces and the influence of climatic conditions: A review

Although the unprecedented efforts the world has been taking to control the spread of the human coronavirus disease (COVID-19) and its causative aetiology [severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2)], the number of confirmed cases has been increasing drastically. Therefore, there is an urgent need for devising more efficient preventive measures, to limit the spread of the infection until an effective treatment or vaccine is available. The preventive measures depend mainly on the understanding of the transmission routes of this virus, its environmental stability, and its persistence on common touch surfaces. Due to the very limited knowledge about SARS-CoV-2, we can speculate its stability in the light of previous studies conducted on other human and animal coronaviruses. In this review, we present the available data on the stability of coronaviruses (CoVs), including SARS-CoV-2, from previous reports to help understand its environmental survival. According to available data, possible airborne transmission of SARS-CoV-2 has been suggested. SARS-CoV-2 and other human and animal CoVs have remarkably short persistence on copper, latex and surfaces with low porosity as compared to other surfaces like stainless steel, plastics, glass and highly porous fabrics. It has also been reported that SARS-CoV-2 is associated with diarrhoea and that it is shed in the faeces of COVID-19 patients. Some CoVs show persistence in human excrement, sewage and waters for a few days. These findings suggest a possible risk of faecal-oral, foodborne and waterborne transmission of SARS-CoV-2 in developing countries that often use sewage-polluted waters in irrigation and have poor water treatment systems. CoVs survive longer in the environment at lower temperatures and lower relative humidity. It has been suggested that large numbers of COVID-19 cases are associated with cold and dry climates in temperate regions of the world and that seasonality of the virus spread is suspected.

Persistence of Pathogens on Inanimate Surfaces: A Narrative Review

For the prevention of infectious diseases, knowledge about transmission routes is essential. In addition to respiratory, fecal-oral, and sexual transmission, the transfer of pathogens via surfaces plays a vital role for human pathogenic infections-especially nosocomial pathogens. Therefore, information about the survival of pathogens on surfaces can have direct implications on clinical measures, including hygiene guidelines and disinfection strategies. In this review, we reviewed the existing literature regarding viral, bacterial, and fungal persistence on inanimate surfaces. In particular, the current knowledge of the survival time and conditions of clinically relevant pathogens is summarized. While many pathogens persist only for hours, common nosocomial pathogens can survive for days to weeks under laboratory conditions and thereby potentially form a continuous source of transmission if no adequate inactivation procedures are performed.

Stability of SARS-CoV-2 and other coronaviruses in the environment and on common touch surfaces and the influence of climatic conditions: A review

Although the unprecedented efforts the world has been taking to control the spread of the human coronavirus disease (COVID‐19) and its causative aetiology [severe acute respiratory syndrome coronavirus 2 (SARS‐CoV‐2)], the number of confirmed cases has been increasing drastically. Therefore, there is an urgent need for devising more efficient preventive measures, to limit the spread of the infection until an effective treatment or vaccine is available. The preventive measures depend mainly on the understanding of the transmission routes of this virus, its environmental stability, and its persistence on common touch surfaces. Due to the very limited knowledge about SARS‐CoV‐2, we can speculate its stability in the light of previous studies conducted on other human and animal coronaviruses. In this review, we present the available data on the stability of coronaviruses (CoVs), including SARS‐CoV‐2, from previous reports to help understand its environmental survival. According to available data, possible airborne transmission of SARS‐CoV‐2 has been suggested. SARS‐CoV‐2 and other human and animal CoVs have remarkably short persistence on copper, latex and surfaces with low porosity as compared to other surfaces like stainless steel, plastics, glass and highly porous fabrics. It has also been reported that SARS‐CoV‐2 is associated with diarrhoea and that it is shed in the faeces of COVID‐19 patients. Some CoVs show persistence in human excrement, sewage and waters for a few days. These findings suggest a possible risk of faecal–oral, foodborne and waterborne transmission of SARS‐CoV‐2 in developing countries that often use sewage‐polluted waters in irrigation and have poor water treatment systems. CoVs survive longer in the environment at lower temperatures and lower relative humidity. It has been suggested that large numbers of COVID‐19 cases are associated with cold and dry climates in temperate regions of the world and that seasonality of the virus spread is suspected.

Hospital textiles, are they a possible vehicle for healthcare-associated infections?

Textiles are a common material in healthcare facilities; therefore it is important that they do not pose as a vehicle for the transfer of pathogens to patients or hospital workers. During the course of use hospital textiles become contaminated and laundering is necessary. Laundering of healthcare textiles is most commonly adequate, but in some instances, due to inappropriate disinfection or subsequent recontamination, the textiles may become a contaminated inanimate surface with the possibility to transfer pathogens. In this review we searched the published literature in order to answer four review questions: (1) Are there any reports on the survival of microorganisms on hospital textiles after laundering? (2) Are there any reports that indicate the presence of microorganisms on hospital textiles during use? (3) Are there any reports that microorganisms on textiles are a possible source infection of patients? (4) Are there any reports that microorganisms on textiles are a possible source infection for healthcare workers?