The Butterfly Effect: Multifaceted Consequences of Sensitizer Concentration Change in Phase Transition-based Luminescent Thermometer of LiYO2:Er3+,Yb3

In response to the ongoing quest for new, highly sensitive upconverting luminescent thermometers, this article introduces, for the first time, upconverting luminescent thermometers based on thermally induced structured phase transitions. As demonstrated, the transition from the low-temperature monoclinic to the high-temperature tetragonal structures of LiYO2:Yb3+,Er3+ induces multifaceted modification in the spectroscopic properties of the examined material, influencing the spectral positions of luminescence bands, energy gap values between thermally coupled energy levels, and the red-to-green emission intensities ratio. Moreover, as illustrated, both the color of the emitted light and the phase transition temperature (from 265 K, for LiYO2:Er3+, 1%Yb3+, to 180 K, for 10%Yb3+), and consequently, the thermometric parameters of the luminescent thermometer can be modulated by the concentration of Yb3+ sensitizer ions. Establishing a correlation between the phase transition temperature and the mismatch of ion radii between the host material and dopant ions allows for smooth adjustment of the thermometric performance of such a thermometer following specific application requirements. Three different thermometric approaches were investigated using thermally coupled levels (SR = 1.8%/K at 180 K for 1%Yb3+), green to red emission intensities ratio (SR = 1.5%/K at 305 K for 2%Yb3+), and single band ratiometric approach (SR = 2.5%/K at 240 K for 10%Yb3+). The thermally induced structural phase transition in LiYO2:Er3+,Yb3+ has enabled the development of multiple upconverting luminescent thermometers. This innovative approach opens avenues for advancing the field of luminescence thermometry, offering enhanced relative thermal sensitivity and adaptability for various applications.

Influence of Tartrate Ligand Coordination over Luminescence Properties of Chiral Lanthanide-Based Metal-Organic Frameworks

The present work reports on a detailed discussion about the synthesis, characterization, and luminescence properties of three pairs of enantiopure 3D metal-organic frameworks (MOFs) with general formula {[Ln₂(L/D-tart)₃(H₂O)₂]·3H₂O}_n (3D_Ln-L/D, where Ln = Sm(III), Eu(III) or Gd(III), and L/D-tart = L- or D-tartrate), and ten pairs of enantiopure 2D coordination polymers (CPs) with general formula [Ln(L/D-Htart)₂(OH)(H₂O)₂]_n (2D_Ln-L/D, where Ln = Y(III), Sm(III), Eu(III), Gd(III), Tb(III), Dy(III), Ho(III), Er(III), Tm(III) or Yb(III), and L/D-Htart = hydrogen L- or D-tartrate) based on single-crystal X-ray structures. Enantiopure nature of the samples has been further corroborated by Root Mean Square Deviation (RMSD) as well as by circular dichroism (CD) spectra. Solid-state emission spectra of Eu(III), Tb(III), and Dy(III)-based compounds confirm the occurrence of ligand-to-metal charge transfers in view of the characteristic emissions for these lanthanide ions, and emission decay curves were also recorded to estimate the emission lifetimes for the reported compounds. A complete theoretical study was accomplished to better understand the energy transfers occurring in the Eu-based counterparts, which allows for explaining the different performances of 3D-MOFs and 2D-layered compounds. As inferred from the colorimetric diagrams, emission characteristics of Eu-based 2D CPs depend on the temperature, so their luminescent thermometry has been determined on the basis of a ratiometric analysis between the ligand-centered and Eu-centered emission. Finally, a detailed study of the polarized luminescence intensity emitted by the samples is also accomplished to support the occurrence of chiro-optical activity.

Exploration of the Temperature Sensing Ability of La2MgTiO6:Er3+ Double Perovskites Using Thermally Coupled and Uncoupled Energy Levels

This work aimed to explore the temperature-sensing performance of La2MgTiO6:Er3+ double perovskites based on thermally coupled and uncoupled energy levels. Furthermore, the crystal structure, chemical composition, and morphology of the samples were investigated by powder X-ray diffraction, energy-dispersive X-ray spectroscopy, and scanning electron microscopy, respectively. The most intense luminescence was observed for the sample doped with 5% Er3+. The temperature-dependent emission spectra of La2MgTiO6:5% Er3+ were investigated in the wide range of 77-398 K. The highest sensitivity of the sample was equal to 2.98%/K corresponding to the thermally coupled energy level 2H11/2 → 4I15/2 and 4S3/2 → 4I15/2 as compared to 1.9%/K, obtained for the uncoupled energy level 2H11/2 → 4I15/2 and 2H9/2 → 4I15/2. Furthermore, the 300 K luminescent decay profiles were analyzed using the Inokuti-Hirayama model. The energy transfer among Er3+ ions was mainly regulated by the dipole-dipole mechanism. The critical transfer distance R0, critical concentration C0, energy transfer parameter Cda, and energy transfer probability Wda were 9.81 Å, 2.53×1020 ions·cm-3, 5.38×10-39 cm6·s-1, and 6020 s-1, respectively.

Luminescent PMMA Films and PMMA@SiO2 Nanoparticles with Embedded Ln3+ Complexes for Highly Sensitive Optical Thermometers in the Physiological Temperature Range*

In recent years, luminescent materials doped with Ln³⁺ ions have attracted much attention for their application as optical thermometers based on both downshifting and upconversion processes. This study presents research done on the development of highly sensitive optical thermometers in the physiological temperature range based on poly(methyl methacrylate) (PMMA) films doped with two series of visible Ln³⁺ complexes (Ln³⁺ =Tb³⁺ , Eu³⁺ , and Sm³⁺ ) and SiO₂ nanoparticles (NPs) coated with these PMMA films. The best performing PMMA film doped with Tb³⁺ and Eu³⁺ complexes was the PMMA[TbEuL₁ tppo]1 film (L₁ =4,4,4-trifluoro-1-phenyl-1,3-butadionate; tppo=triphenylphosphine oxide), which showed good temperature sensing of S_r =4.21 % K^-1 at 313 K, whereas for the PMMA films doped with Tb³⁺ and Sm³⁺ complexes the best performing was the PMMA[TbSmL₂ tppo]3 film (L₂ =4,4,4-trifluoro-1-(4-chlorophenyl)-1,3-butadionate), with S_r =3.64 % K^-1 at 313 K. Additionally, SiO₂ NPs coated with the best performing films from each of the series of PMMA films (Tb-Eu and Tb-Sm) and their temperature-sensing properties were studied in water, showing excellent performance in the physiological temperature range (PMMA[TbEuL₁ tppo]1@SiO₂ : S_r =3.84 % °C at 20 °C; PMMA[TbSmL₂ tppo]3@SiO₂ : S_r =3.27 % °C at 20 °C) and the toxicity of these nanoparticles on human cells was studied, showing that they were nontoxic.

Implementing Defects for Ratiometric Luminescence Thermometry

In luminescence thermometry enabling temperature reading at a distance, an important challenge is to propose new solutions that open measuring and material possibilities. Responding to these needs, in the nanocrystalline phosphors of yttrium oxide Y₂O₃ and lutetium oxide Lu₂O₃, temperature-dependent emission of trivalent terbium Tb³⁺ dopant ions was recorded at the excitation wavelength 266 nm. The signal of intensity decreasing with temperature was monitored in the range corresponding to the ⁵D₄ → ⁷F₆ emission band. On the other hand, defect emission intensity obtained upon 543 nm excitation increases significantly at elevated temperatures. The opposite thermal monotonicity of these two signals in the same spectral range enabled development of the single band ratiometric luminescent thermometer of as high a relative sensitivity as 4.92%/°C and 2%/°C for Y₂O₃:Tb³⁺ and Lu₂O₃:Tb³⁺ nanocrystals, respectively. This study presents the first report on luminescent thermometry using defect emission in inorganic phosphors.

In Vivo Spectral Distortions of Infrared Luminescent Nanothermometers Compromise Their Reliability

Luminescence nanothermometry has emerged over the past decade as an exciting field of research due to its potential applications where conventional methods have demonstrated to be ineffective. Preclinical research has been one of the areas that have benefited the most from the innovations proposed in the field. Nevertheless, certain questions concerning the reliability of the technique under in vivo conditions have been continuously overlooked by most of the scientific community. In this proof-of-concept, hyperspectral in vivo imaging is used to explain how unverified assumptions about the thermal dependence of the optical transmittance of biological tissues in the so-called biological windows can lead to erroneous measurements of temperature. Furthermore, the natural steps that should be taken in the future for a reliable in vivo luminescence nanothermometry are discussed together with a perspective view of the field after the findings here reported.

LiAl5O8:Fe3+ and LiAl5O8:Fe3+, Nd3+ as a New Luminescent Nanothermometer Operating in 1st Biological Optical Window

New types of contactless luminescence nanothermometers, namely, LiAl₅O₈:Fe³⁺ and LiAl₅O₈:Fe³⁺, Nd³⁺ are presented for the first time, revealing the potential for applications in biological systems. The temperature-sensing capability of the nanocrystals was analyzed in wide range of temperature (-150 to 300 °C). The emission intensity of the Fe³⁺ ions is affected by the change in temperature, which induces quenching of the ⁴T₁ (⁴G) → ⁶A₁ (⁶S) Fe³⁺ transition situated in the 1^st biological window. The highest relative sensitivity in the temperature range (0 to 50 °C) was found to be 0.82% °C (at 26 °C) for LiAl₅O₈: 0.05% Fe³⁺ nanoparticles that are characterized by long luminescent lifetime of 5.64 ms. In the range of low and high temperatures the S_max was calculated for LiAl₅O₈:0.5% Fe³⁺ to be 0.92% °C at -100 °C and for LiAl₅O₈:0.01% Fe³⁺ to be 0.79% °C at 150 °C. The cytotoxicity assessment carried out on the LiAl₅O₈:Fe³⁺ nanocrystals, demonstrated that they are biocompatible and may be utilized for in vivo temperature sensing. The ratiometric luminescent nanothermometer, LiAl₅O₈:Fe³⁺, Nd³⁺, which was used as a reference, possesses an S_max = 0.56%/°C at -80 °C, upon separate excitation of Fe³⁺ and Nd³⁺ ions using 266 nm and 808 nm light, respectively.

Upconverting LuVO4:Nd3+/Yb3+/Er3+@SiO2@Cu2S Hollow Nanoplatforms for Self-monitored Photothermal Ablation

Self-monitored photothermal therapy (PTT) with minimal collateral damages has emerged as a challenging strategy for antibacterial and cancer treatments, which could be fulfilled via the rational integration of luminescent thermometry and photothermal ablation within a single upconverting (UC) nanoplatform. Herein, 808 nm light-driven dual-functional nanoplatforms LuVO₄:Nd³⁺/Yb³⁺/Er³⁺@SiO₂@Cu₂S were successfully developed using olivelike LuVO₄:Nd³⁺/Yb³⁺/Er³⁺ hollow nanoparticles as the thermal-sensing core and ultrasmall Cu₂S nanoparticles as the photothermal satellite. Irradiated by 808 nm laser, thermal-sensing behaviors of samples were evaluated based on the high-purity Er³⁺ green emissions, while the surface-attached Cu₂S exhibited superior photothermal effects due to the efficient absorption of incident laser and near-infrared emissions from the luminescent core. The feasibility of bifunctional samples acting as self-monitored photothermal agents in subtissues and antibacterial agents against drug-resistant bacteria was separately assessed. Results provide deeper insights into the desirable design of 808 nm-driven multifunctional nanoplatforms with intense UC emission, sensitive thermometry, and effective photothermal conversion toward self-monitored PTT with high therapeutic accuracy.

Phosphor-Assisted Temperature Sensing and Imaging Using Resonant and Nonresonant Photoexcitation Scheme

Phosphor-assisted luminescent thermometry relies on studying, often subtle, temperature-dependent spectral properties, such as luminescence spectra, bands shifts, or luminescence lifetimes. Although this is feasible with high-resolution spectrometers or time-resolved detectors, technical implementation of such temperature mapping or wide-field imaging is complex and cumbersome. Therefore, a new approach for noncontact ratiometric temperature detection has been proposed based on comparison of emission properties of bright Cr³⁺-doped phosphors at single emission band upon two, resonant and nonresonant, optical excitation bands. The proposed method of temperature readout was examined for three different host materials: YAlO₃, Y₃Al₅O₁₂, and LiLaP₄O₁₂ nanocrystals. The highest relative sensitivity in physiological temperature range was found for YAlO₃ nanocrystals reaching 0.35%/K, which is related to the highest crystal field found for this phosphor. The proposed methodology and the obtained materials enabled to not only reliably measure temperature in the range of -150 to 300 °C but also significantly simplify the technical detection scheme. In consequence, lamp-photoexcited, wide-field, micron-resolution microscopy imaging became possible, which is of special interest for many remote temperature studies in technology and biomedical applications.