Optical Fiber Time Delay Comparison Between NIST and LAMETRO

We describe the results of a bilateral measurement comparison of optical fiber time delay between the National Institute of Standards and Technology (NIST, USA) and Laboratorio de Metrología, Instituto Costarricense de Electricidad (LAMETRO-ICE, Costa Rica), which was conducted on a single-mode optical fiber reference spool at wavelengths of 1310 nm and 1550 nm. The measurement results showed the largest difference to be less than 0.93 ns, which is within the combined standard uncertainty (coverage factor k = 1) for the measurement systems at the two laboratories.

Distributed Humidity Sensing in Concrete Based on Polymer Optical Fiber

We present a preliminary investigation on distributed humidity monitoring during the drying process of concrete based on an embedded polymer optical fiber (POF). The water dissipated into the POF changes several properties of the fiber such as refractive index, scattering coefficient and attenuation factor, which eventually alters the Rayleigh backscattered light. The optical time domain reflectometer (OTDR) technique is performed to acquire the backscattered signal at the wavelengths 650 nm and 500 nm, respectively. Experimental results show that the received signal increases at 650 nm while the fiber attenuation factor clearly increases at 500 nm, as the concrete dries out. In the hygroscopic range, the information retrieved from the signal change at 650 nm agrees well with the measurement result of the electrical humidity sensors also embedded in the concrete sample.

Durability tests of a fiber optic corrosion sensor

Steel corrosion is a major cause of degradation in reinforced concrete structures, and there is a need to develop cost-effective methods to detect the initiation of corrosion in such structures. This paper presents a low cost, easy to use fiber optic corrosion sensor for practical application. Thin iron film is deposited on the end surface of a cleaved optical fiber by sputtering. When light is sent into the fiber, most of it is reflected by the coating. If the surrounding environment is corrosive, the film is corroded and the intensity of the reflected signal drops significantly. In previous work, the sensing principle was verified by various experiments in laboratory and a packaging method was introduced. In this paper, the method of multiplexing several sensors by optical time domain reflectometer (OTDR) and optical splitter is introduced, together with the interpretation of OTDR results. The practical applicability of the proposed sensors is demonstrated in a three-year field trial with the sensors installed in an aggressive marine environment. The durability of the sensor against chemical degradation and physical degradation is also verified by accelerated life test and freeze-thaw cycling test, respectively.