An Efficient C-Si/C-H Cross-Coupling Reaction Enabled by a Radical Pathway

The methods for the cross-coupling of aryl(trialkyl)silanes are long-standing challenges due to the extreme inertness of C-Si(R3 ) bond, though the reaction is environmentally friendly and highly regioselective to synthesize biaryls. Herein, we report a copper-catalyzed cross-coupling of aryl(trialkyl)silanes and aryl via a radical mechanism. The reaction proceeds efficiently with aryl sulfonium salts as limiting reagents, exhibits broad substrate scope, and provides an important synthetic strategy to acquire biaryls, exemplified by unsymmetrical fluorescence probes and late-stage functionalization of drugs. Of note, the experimental and theoretical mechanistic studies revealed a radical mechanism where the copper catalyst and CsF play critical roles on the radical generation and desilylation process.

Linear-Structure Single-Atom Gold(I) Catalyst for Dehydrogenative Coupling of Organosilanes with Alcohols

A strategy for the synthesis of a gold-based single-atom catalyst (SAC) via a one-step room temperature reduction of Au(III) salt and stabilization of Au(I) ions on nitrile-functionalized graphene (cyanographene; G-CN) is described. The graphene-supported G(CN)-Au catalyst exhibits a unique linear structure of the Au(I) active sites promoting a multistep mode of action in dehydrogenative coupling of organosilanes with alcohols under mild reaction conditions as proven by advanced XPS, XAFS, XANES, and EPR techniques along with DFT calculations. The linear structure being perfectly accessible toward the reactant molecules and the cyanographene-induced charge transfer resulting in the exclusive Au(I) valence state contribute to the superior efficiency of the emerging two-dimensional SAC. The developed G(CN)-Au SAC, despite its low metal loading (ca. 0.6 wt %), appear to be the most efficient catalyst for Si-H bond activation with a turnover frequency of up to 139,494 h-1 and high selectivities, significantly overcoming all reported homogeneous gold catalysts. Moreover, it can be easily prepared in a multigram batch scale, is recyclable, and works well toward more than 40 organosilanes. This work opens the door for applications of SACs with a linear structure of the active site for advanced catalytic applications.

Methods of Formation of Protective Inhibited Polymer Films on Tungsten

A comparative study of anticorrosive inhibited polymer films on the tungsten surface formed from an aqueous solution of inhibited formulations (INFOR) containing organosilane and corrosion inhibitors was carried out by means of the prolonged exposure of a tungsten product in a modifying solution and by the method of cataphoretic deposition (CPD). Depending on the method of forming films on tungsten, the molecular organization of the near-surface layers was studied (ATR-FTIR), and the subprimary structure of the films was explored (TEM). The optimal modes of cataphoresis deposition (CPD duration and current density applied to the sample) for the formation of a protective inhibited polymer film on the tungsten surface were established by means of SEM. The energy and thermochemical characteristics (sessile drop and DSC methods), as well as operational (adhesive behavior) and protective filming ability (EIS and corrosion behavior), according to the method of formation of inhibited polymer film, were determined. Based on the combined characteristics of the films obtained by the two methods and the deposition modes, the CPD method showed better performance than the electroless dipping method.

Application of Electrophoretic Deposition as an Advanced Technique of Inhibited Polymer Films Formation on Metals from Environmentally Safe Aqueous Solutions of Inhibited Formulations

The presented paper analyzes polymer films formed from aqueous solutions of organosilanes, corrosion inhibitors and their compositions. Methods of depositing inhibited films on metal samples, such as dipping and exposure of the sample in a modifying solution, as well as an alternative method, electrophoretic deposition (EPD), are discussed. Information is provided on the history of the EPD method, its essence, production process, areas of application of this technology, advantages over existing analogues, as well as its varieties. The article considers the promise of using the EPD method to form protective inhibited polymer films on metal surfaces from aqueous solutions of inhibitor formulations consisting of molecules of organosilanes and corrosion inhibitors.

Barium Titanate Functionalization with Organosilanes: Effect on Particle Compatibility and Permittivity in Nanocomposites

Barium titanate (BT) recently gained new interest in the preparation of dielectric and piezoelectric lead-free materials for applications in sensors, electronics, energy harvesting and storage fields. Barium titanate nanocomposites can achieve attractive performance, provided that the compatibility between ceramic particles and polymeric matrices is enhanced to the benefit of the physical properties of the final composite. Tuning the particle-matrix interface through particle functionalization represents a viable solution. In this work, surface functionalization of BT nanoparticles (NPs), obtained by hydrothermal synthesis, with 3-glycidyloxypropyltrimethoxysilane, 2-[(acetoxy(polyethyleneoxy)propyl]triethoxysilane and triethoxysilylpropoxy(polyethyleneoxy)dodecanoate, was performed after optimizing the hydroxylation process of the NPs to improve their surface reactivity and increase the yield of grafting. Solid-state nuclear magnetic resonance and thermogravimetric analysis were used to quantify the molecules grafted onto the ceramic nanoparticles. Both bare and functionalized particles were employed in the realization of epoxy- and polydimethylsiloxane (PDMS)-based nanocomposites. Functionalization was proven to be beneficial for particle dispersibility and effective for particle alignment in the PDMS matrix. Moreover, the dielectric constant measurements revealed the potential of PDMS-based nanocomposites for applications in the field of dielectric elastomers.

Formation of Composite Coatings on Galvanized Steel from Organosilane Solutions Using Electrophoresis and Sol-Gel Technology

New hybrid composite coatings (HCCs) on hot-dip galvanized steel (HDGS) were obtained using electrophoresis (cathodic polarization (CP)) and sol–gel technology. For this purpose, a technique for the preparation of a cationic precursor based on TiCl₄ and aminopropyltriethoxysilane was developed. Electrophoresis of the charged particles of the precursor and organosilanes promotes the production of denser sol–gel coatings with improved adhesion. Using scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and electrochemical impedance spectroscopy (EIS) methods, the formation mechanism and protective properties of HCC on galvanized steel were investigated.

A Copper(I)-Catalyzed Sulfonylative Hiyama Cross-Coupling

An air-tolerant Cu-catalyzed sulfonylative Hiyama cross-coupling reaction enabling the formation of diaryl sulfones is described. Starting from aryl silanes, DABSO and aryliodides, the reaction tolerates a large variety of polar functional groups (amines, ketones, esters, aldehydes). Control experiments coupled with DFT calculations shed light on the mechanism, characterized by the formation of a Cu(I)-sulfinate intermediate via fast insertion of a SO₂ molecule.

Synthesis of Novel Dental Nanocomposite Resins by Incorporating Polymerizable, Quaternary Ammonium Silane-Modified Silica Nanoparticles

Diverse approaches dealing with the reinforcement of dental composite resins with quaternary ammonium compounds (QAC) have been previously reported. This work aims to investigate the physicochemical and mechanical performance of dental resins containing silica nanofillers with novel QAC. Different types of quaternary ammonium silane compounds (QASiC) were initially synthesized and characterized with proton nuclear magnetic resonance (¹H-NMR) and Fourier transform infrared (FTIR) spectroscopy. Silica nanoparticles were surface modified with the above QASiC and the structure of silanized products (S.QASiC) was confirmed by means of FTIR and thermogravimetric analysis. The obtained S.QASiC were then incorporated into methacrylate based dental resins. Scanning electron microscopy images revealed a satisfactory dispersion of silica nanoclusters for most of the synthesized nanocomposites. Curing kinetics disclosed a rise in both the autoacceleration effect and degree of conversion mainly induced by shorter QASiC molecules. Polymerization shrinkage was found to be influenced by the particular type of S.QASiC. The flexural modulus and strength of composites were increased by 74% and 19%, while their compressive strength enhancement reached up to 19% by adding 22 wt% S.QASiC nanoparticles. These findings might contribute to the proper design of multifunctional dental materials able to meet the contemporary challenges in clinical practice.

Cross-Electrophile C(sp2 )-Si Coupling of Vinyl Chlorosilanes

The cross-electrophile coupling has become a powerful tool for C-C bond formation, but its potential for forging the C-Si bond remains unexplored. Here we report a cross-electrophile Csp² -Si coupling reaction of vinyl/aryl electrophiles with vinyl chlorosilanes. This new protocol offers an approach for facile and precise synthesis of organosilanes with high molecular diversity and complexity from readily available materials. The reaction proceeds under mild and non-basic conditions, demonstrating a high step economy, broad substrate scope, wide functionality tolerance, and easy scalability. The synthetic utility of the method is shown by its efficient accessing of silicon bioisosteres, the design of new BCB-monomers, and studies on the Hiyama cross-coupling of vinylsilane products.

Improvement of White Spruce Wood Dimensional Stability by Organosilanes Sol-Gel Impregnation and Heat Treatment

Wood is a living material with a dimensional stability problem. White spruce wood is a Canadian non-permeable wood that is used for siding applications. To improve this property, white spruce wood was treated with organosilanes sol-gel treatment with different moisture content (oven dried, air dried, and green wood). No major morphological changes were observed after treatment. However, organosilanes were impregnated into the cell wall without densifying the wood and without modifying the wood structure. Si-O-C chemical bonds between organosilanes and wood and Si-O-Si bonds were confirmed by FTIR and NMR, showing the condensation of organosilanes. The green wood (41% moisture content) showed only 26% dimensional stability due to the presence of too much water for organosilanes treatment. With a moisture content of 14%–18% (oven dried or air dried wood), the treatment was adapted to obtain the best improvement in dimensional stability of 35% and a 25% reduction of water vapor sorption. Finally, impregnation with organosilanes combined with the appropriate heat treatment improved the dimensional stability of white spruce wood by up to 35%. This treated Canadian wood could be an interesting option to validate for siding application in Canada.

Effect of the Organic Functional Group on the Grafting Ability of Trialkoxysilanes onto Graphene Oxide: A Combined NMR, XRD, and ESR Study

The functional properties displayed by graphene oxide (GO)-polymer nanocomposites are strongly affected by the dispersion ability of GO sheets in the polymeric matrix, which can be largely improved by functionalization with organosilanes. The grafting to GO of organosilanes with the general formula RSi(OCH₃)₃ is generally explained by the condensation reactions of silanols with GO reactive groups. In this study, the influence of the organic group on the RSi(OCH₃)₃ grafting ability was analyzed in depth, taking into account the interactions of the R end chain group with GO oxidized groups. Model systems composed of commercial graphene oxide reacted with 3-aminopropyltrimethoxysilane (APTMS), 3-mercaptopropyltrimethoxysilane (MPTMS), and 3-methacryloxypropyltrimethoxysilane, (MaPTMS), respectively, were characterized by natural abundance ¹³C, ¹⁵N and ²⁹Si solid state nuclear magnetic resonance (NMR), x-ray diffraction (XRD), and electron spin resonance (ESR). The silane organic tail significantly impacts the grafting, both in terms of the degree of functionalization and direct interaction with GO reactive sites. Both the NMR and XRD proved that this is particularly relevant for APTMS and to a lower extent for MPTMS. Moreover, the epoxy functional groups on the GO sheets appeared to be the preferential anchoring sites for the silane condensation reaction. The characterization approach was applied to the GO samples prepared by the nitric acid etching of graphene and functionalized with the same organosilanes, which were used as a filler in acrylic coatings obtained by cataphoresis, making it possible to correlate the structural properties and the corrosion protection ability of the layers.

Surface Structuring and Water Interactions of Nanocellulose Filaments Modified with Organosilanes toward Wearable Materials

Colloidal dispersions of cellulose nanofibrils (CNFs) are viable alternatives to cellulose II dissolutions used for filament spinning. The porosity and water vapor affinity of CNF filaments make them suitable for controlled breathability. However, many textile applications also require water repellence. Here, we investigated the effects of postmodification of wet-spun CNF filaments via chemical vapor deposition (CVD). Two organosilanes with different numbers of methyl substituents were considered. Various surface structures were achieved, either as continuous, homogeneous coating layers or as three-dimensional, hairy-like assemblies. Such surface features reduced the surface energy, which significantly affected the interactions with water. Filaments with water contact angles of up to 116° were obtained, and surface energy measurements indicated the possibility of developing amphiphobicity. Dynamic vapor sorption and full immersion experiments were carried out to inquire about the interactions with water, whether in the liquid or gas forms. Mechanical tests revealed that the wet strength of the modified filaments were almost 3 times higher than that of the unmodified precursors. The hydrolytic and mechanical stabilities of the adsorbed layers were also revealed. Overall, our results shed light on the transformation of aqueous dispersions of CNFs into filaments that are suited for controlled interactions with water via concurrent hydrolysis and condensation reactions in CVD, while maintaining the moisture buffering capacity and breathability of related structures.

Understanding Site Selectivity in the Palladium-Catalyzed Cross-Coupling of Allenylsilanolates

Allenylsilanolates can undergo cross-coupling at the α- or γ-terminus, and site selectivity appears to be determined by the intrinsic transmetalation mechanism. Fine-tuning of concentration, nucleophilicity, and steric bulk of the silanolate moiety allows for the selective formation of one isomer over the other. Whereas the α-isomer can be obtained in synthetically useful yield, the γ-isomer is favored only when employing reaction conditions that are inevitably associated with diminished reactivity.

Anti-adhesion and Anti-biofilm Potential of Organosilane Nanoparticles against Foodborne Pathogens

Nowadays, modification of surfaces by nanoparticulate coatings is a simple process that may have applications in reducing the prevalence of bacterial cells both on medical devices and food processing surfaces. To this direction, biofilm biological cycle of Salmonella Typhimurium, Listeria monocytogenes, Escherichia coli O157:H7, Staphylococcus aureus, and Yersinia enterocolitica on stainless steel and glass surfaces, with or without nanocoating was monitored. To achieve this, four different commercial nanoparticle compounds (two for each surface) based on organo-functionalized silanes were selected. In total 10 strains of above species (two for each species) were selected to form biofilms on modified or not, stainless steel or glass surfaces, incubated at 37°C for 72 h. Biofilm population was enumerated by bead vortexing-plate counting method at four time intervals (3, 24, 48, and 72 h). Organosilane based products seemed to affect bacterial attachment on the inert surfaces and/or subsequent biofilm formation, but it was highly dependent on the species and material of surfaces involved. Specifically, reduced bacterial adhesion (at 3 h) of Salmonella and E. coli was observed (P < 0.05) in nanocoating glass surfaces in comparison with the control ones. Moreover, fewer Salmonella and Yersinia biofilm cells were enumerated on stainless steel coupons coated with organosilanes, than on non-coated surfaces at 24 h (P < 0.05). This study gives an insight to the efficacy of organosilanes based coatings against biofilm formation of foodborne pathogens, however, further studies are needed to better understand the impact of surface modification and the underlying mechanisms which are involved in this phenomenon.

Molecular Combing of λ-DNA using Self-Propelled Water Droplets on Wettability Gradient Surfaces

Surface wettability gradients were used to elongate and align double stranded λ-DNA. Gradients were prepared by vapor phase deposition of octyltrichlorosilane (C8-silane) and fluorinated octyltrichlorosilane (F-silane) precursors. Gradient formation was confirmed by water contact angle and ellipsometric film thickness measurements. Placement of a droplet of aqueous DNA solution on the hydrophobic end of each gradient led to spontaneous motion of the droplet toward the hydrophilic end and deposition of the DNA. Fluorescence imaging of surface-adsorbed YOYO-1 labeled DNA molecules revealed that they are elongated and aligned perpendicular to the droplet-surface contact line at all positions along the gradient, consistent with a dominant role played by surface tension forces in elongating the DNA. The density of adsorbed DNA was found to be greatest on the C8-silane gradient at its hydrophobic end. DNA density decreased toward the hydrophilic end, while the length of the elongated DNA was less dependent on position. The elongation of DNA molecules by spontaneous droplet motion on chemical gradient surfaces has possible applications in DNA barcoding and studies of DNA-protein interactions.

Mechanism of the Transmetalation of Organosilanes to Gold

Density functional theory (DFT) calculations were carried out to study the reaction mechanism of the first transmetalation of organosilanes to gold as a cheap fluoride‐free process. The versatile gold(I) complex [Au(OH)(IPr)] permits very straightforward access to a series of aryl‐, vinyl‐, and alkylgold silanolates by reaction with the appropriate silane reagent. These silanolate compounds are key intermediates in a fluoride‐free process that results in the net transmetalation of organosilanes to gold, rather than the classic activation of silanes as silicates using external fluoride sources. However, here we propose that the gold silanolate is not the active species (as proposed during experimental studies) but is, in fact, a resting state during the transmetalation process, as a concerted step is preferred.

Preparation and Reaction Chemistry of Novel Silicon-Substituted 1,3-Dienes

2-Silicon-substituted 1,3-dienes containing non transferrable groups known to promote transmetallation were prepared by Grignard chemistry and enyne metathesis. These dienes participated in one pot metathesis/Diels-Alder reactions in regio- and diastereoselective fashions. Electron-rich alkenes showed the fastest rates in metathesis reactions, and ethylene, a commonly used metathesis promoter slowed enyne metathesis. 2-Pyridyldimethylsilyl and 2-thienyldimethylsilyl substituted Diels-Alder cycloadducts participated in cross-coupling chemistry and the 2-thienyldimethylsilyl substituted cycloadducts underwent cross-coupling under very mild reaction conditions.

Organically Modified Silica Nanoparticles Interaction with Macrophage Cells: Assessment of Cell Viability on the Basis of Physicochemical Properties

Silica nanoparticles have drawn a lot of attention for nanomedicine application, and this is attributed to their biocompatibility and ease of surface functionalization. However, successful utilization of these inorganic systems for biomedical application depends on their physicochemical properties. This study, therefore, discusses in vitro toxicity of organically modified silica nanoparticles on the basis of size, shape, and surface properties of silica nanoparticles. Spherical- and oval-shaped nanoparticles having hydroxyl and amine groups were synthesized in Tween 80 micelles using different organosilanes. Nanoparticles of similar size and morphology were considered for comparative assessment. "As-prepared" nanoparticles were characterized in terms of size, shape, and surface properties using ZetaSizer, transmission electron microscopy, and Fourier transform infrared to establish the above parameters. In vitro analysis in terms of nanoparticle-based toxicity was performed on J-774 (macrophage) cell line using propidium iodide-4',6-diamidino-2-phenylindol and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assays. Fluorescent dye-entrapped nanoparticles were used to visualize the uptake of the nanoparticles by macrophage cells. Results from cell studies suggested low levels of toxicity for different nanoparticle formulations studied, therefore are suitable for nanocarrier application for poorly soluble molecules. On the contrary, the nanoparticles of similar size and shape, having amine groups and low net negative charge, do not exhibit any in vitro cytotoxicity.

Oxidation of organosilanes with nanoporous copper as a sustainable non-noble-metal catalyst

Although many noble-metal catalysts have been used for the oxidation of organosilanes, there has been less success with non-noble-metal catalysts. Here, unsupported nanoporous copper (np-Cu) is used to catalyze the oxidation of organosilanes under mild conditions. It is the first time that this reaction has been achieved with a heterogeneous copper catalyst with high activity and selectivity. Both water and alcohols are used as oxidants and the corresponding organosilanols and organosilyl ethers are obtained in high yield. The possible mechanism was obtained by kinetic studies. The catalyst could be reused at least five times without evident loss of activity. As a novel green catalyst np-Cu should play a unique role in organic synthesis.

Synthesization, Characterization, and in Vitro Evaluation of Cytotoxicity of Biomaterials Based on Halloysite Nanotubes

Halloysite is an aluminosilicate clay that has been widely used for controlled drug delivery, immobilization of enzymes, and for the capture of circulating tumor cells (CTCs). Surface modification of halloysite by organosilanes has been explored to improve their properties. In this study halloysite clay nanotubes (HNTs) were functionalized by two different organosilanes: Trimethoxy(propyl)silane (TMPS), and Triethoxy(octyl)silane (EOS). Untreated and modified samples were characterized by scanning electron microscopy (SEM), X-ray diffractometry (XRD), thermogravimetrical analysis (TGA), and Fourier transform infrared spectroscopy (FTIR). Results showed a strong interaction of organosilanes with the chemical groups present in HNTs. Biocompatibility and cytotoxicity of these nanomaterials were determined using C6 rat glioblastoma cells. Our results indicate that prior to functionalization, HNTs show a high biocompatibility and low cytotoxicity. However, HNTs functionalized with EOS and TMPS showed high cytotoxicity by inducing apoptosis. These results allow the identification of potential applications in biomedical areas for HNTs.

Property Relationship in Organosilanes and Nanotubes Filled Polypropylene Hybrid Composites

Polypropylene composites with different filler contents were prepared by creating a masterbatch containing 3 wt%. filler. A variety of silanol groups were used to synthetized three compounds in different media trough a sol-gel process with acetic acid, formic acid and ammonium hydroxide as catalysts. Besides, four different nanotubular fillers were also used to analyze their behavior and compare it with the effect caused by the silanol groups. These tubular structures comprise: unmodified halloysite, carbon nanotubes and functionalized halloysite and carbon nanotubes. Morphological characterization in SEM and STEM/TEM showed dispersion in the polypropylene matrix. According to TGA and DSC measurements thermal behavior remain similar for all the composites. Mechanical test in tension demonstrate that modulus of the composites increases for all samples with a major impact for materials containing silanol groups synthetized in formic acid. Rheological measurements show a significantly increment in viscosity for samples containing unmodified and modified carbon nanotubes. No difference was found for samples containing silanol groups and halloysite when compared to neat polypropylene. Finally, the oxygen transmission rate increased for all samples showing high barrier properties only for samples containing natural and functionalized halloysite nanotubes.

Surface-directed synthesis of erbium-doped yttrium oxide nanoparticles within organosilane zeptoliter containers

We introduce an approach to synthesize rare earth oxide nanoparticles using high temperature without aggregation of the nanoparticles. The dispersity of the nanoparticles is controlled at the nanoscale by using small organosilane molds as reaction containers. Zeptoliter reaction vessels prepared from organosilane self-assembled monolayers (SAMs) were used for the surface-directed synthesis of rare earth oxide (REO) nanoparticles. Nanopores of octadecyltrichlorosilane were prepared on Si(111) using particle lithography with immersion steps. The nanopores were filled with a precursor solution of erbium and yttrium salts to confine the crystallization step to occur within individual zeptoliter-sized organosilane reaction vessels. Areas between the nanopores were separated by a matrix film of octadecyltrichlorosilane. With heating, the organosilane template was removed by calcination to generate a surface array of erbium-doped yttria nanoparticles. Nanoparticles synthesized by the surface-directed approach retain the periodic arrangement of the nanopores formed from mesoparticle masks. While bulk rare earth oxides can be readily prepared by solid state methods at high temperature (>900 °C), approaches for preparing REO nanoparticles are limited. Conventional wet chemistry methods are limited to low temperatures according to the boiling points of the solvents used for synthesis. To achieve crystallinity of REO nanoparticles requires steps for high-temperature processing of samples, which can cause self-aggregation and dispersity in sample diameters. The facile steps for particle lithography address the problems of aggregation and the requirement for high-temperature synthesis.

Electrophilic alkylations of vinylsilanes: a comparison of α- and β-silyl effects

Kinetics of the reactions of benzhydrylium ions (Aryl2CH(+)) with the vinylsilanes H2C=C(CH3)(SiR3), H2C=C(Ph)(SiR3), and (E)-PhCH=CHSiMe3 have been measured photometrically in dichloromethane solution at 20 °C. All reactions follow second-order kinetics, and the second-order rate constants correlate linearly with the electrophilicity parameters E of the benzhydrylium ions, thus allowing us to include vinylsilanes in the benzhydrylium-based nucleophilicity scale. The vinylsilane H2C=C(CH3)(SiMe3), which is attacked by electrophiles at the CH2 group, reacts one order of magnitude faster than propene, indicating that α-silyl-stabilization of the intermediate carbenium ion is significantly weaker than α-methyl stabilization because H2C=C(CH3)2 is 10(3)  times more reactive than propene. trans-β-(Trimethylsilyl)styrene, which is attacked by electrophiles at the silylated position, is even somewhat less reactive than styrene, showing that the hyperconjugative stabilization of the developing carbocation by the β-silyl effect is not yet effective in the transition state. As a result, replacement of vinylic hydrogen atoms by SiMe3 groups affect the nucleophilic reactivities of the corresponding C=C bonds only slightly, and vinylsilanes are significantly less nucleophilic than structurally related allylsilanes.

The production of concentrated dispersions of few-layer graphene by the direct exfoliation of graphite in organosilanes

We report the formation and characterization of graphene dispersions in two organosilanes, 3-glycidoxypropyl trimethoxysilane (GPTMS) and phenyl triethoxysilane (PhTES) as new reactive solvents. The preparation method was mild and easy and does not produce any chemical modification. The dispersions, which exhibit the Tyndall effect, were characterized by TEM and Raman spectroscopy to confirm the presence of few-layer graphene. Concentrations as high as 0.66 and 8.00 mg/ml were found for PhTES and GPTMS, respectively. The latter is one of the highest values reported for a dispersion of graphene obtained by any method. This finding paves the way for the direct synthesis of polymer nanofiller-containing composites consisting of graphene and reactive silanes to be used in sol-gel synthesis, without any need for solvent removal, thus preventing graphene reaggregation to form graphite flakes.

Charge trapping by self-assembled monolayers as the origin of the threshold voltage shift in organic field-effect transistors

The threshold voltage is an important property of organic field-effect transistors. By applying a self-assembled monolayer (SAM) on the gate dielectric, the value can be tuned. After electrical characterization, the semiconductor is delaminated. The surface potentials of the revealed SAM perfectly agree with the threshold voltages, which demonstrate that the shift is not due to the dipolar contribution, but due to charge trapping by the SAM.