Applying Existing Particle Paradigms to Inhaled Microplastic Particles

Ambient particulate pollution originating from plastic contaminates air, including indoor and urban environments. The recent discovery of ambient microplastic (MP) particles of a size capable of depositing in the thoracic region of the airway, if inhaled, has raised concern for public exposure and health impacts following lessons learned from other particle domains. Current microplastic exposure estimates are relatively low compared to total ambient particulate matter, but optimal analytical techniques and therefore data for risk and health impact assessments are lacking. In the absence of such an evidence base, this paper explores paradigms, metrics and dose-response curves developed in other particle domains as a starting point for predicting whether microplastic are of concern. Bio-persistence, presence of reactive sites and soluble toxicants are likely key properties in microplastic toxicity, but these are not measured in environmental studies and hence are challenging to interpret in exposure. Data from a MP inhalation study in rats is available but the study was conducted using conditions that do not replicate the known human health effects of PM_2.5 or surrogate exposures: compromised, aged animal models are recommended to investigate potential parallels between MPs and PM_2.5. One of these parallels is provided by tire wear particles (TWP), which form part of current ambient PM and are sometimes regarded as microplastic. A connection to epidemiological studies where PM filters are still available is recommended and consequently analytical advances are required. In summary, established particle domains and existing paradigms provide valuable insight and data that can be used to predict MP toxicity, and direct study design and key properties to consider in this emerging field.

Organomodified nanoclays induce less inflammation, acute phase response, and genotoxicity than pristine nanoclays in mice lungs

Surface modification by different quaternary ammonium compounds (QAC) makes nanoclays more compatible with various polymeric matrices, thereby expanding their potential applications. The growing industrial use of nanoclays could potentially pose a health risk for workers. Here, we assessed how surface modification of nanoclays modulates their pulmonary toxicity. An in vitro screening of the unmodified nanoclay Bentonite (montmorillonite) and four organomodified nanoclays (ONC); coated with various QAC, including benzalkonium chloride (BAC), guided the selection of the materials for the in vivo study. Mice were exposed via a single intratracheal instillation to 18, 54, and 162 µg of unmodified Bentonite or dialkyldimethyl-ammonium-coated ONC (NanofilSE3000), or to 6, 18, and 54 µg of a BAC-coated ONC (Nanofil9), and followed for one, 3, or 28 days. All materials induced dose- and time-dependent responses in the exposed mice. However, all doses of Bentonite induced larger, but reversible, inflammation (BAL neutrophils) and acute phase response (Saa3 gene expression in lung) than the two ONC. Similarly, highest levels of DNA strand breaks were found in BAL cells of mice exposed to Bentonite 1 day post-exposure. A significant increase of DNA strand breaks was detected also for NanofilSE3000, 3 days post-exposure. Only mice exposed to Bentonite showed increased Tgf-β gene expression in lung, biomarker of pro-fibrotic processes and hepatic extravasation, 3 days post-exposure. This study indicates that Bentonite treatment with some QAC changes main physical-chemical properties, including shape and surface area, and may decrease their pulmonary toxicity in exposed mice.

28-Day inhalation toxicity of graphene nanoplatelets in Sprague-Dawley rats

Graphene, a two-dimensional engineered nanomaterial, is now being used in many applications, such as electronics, biological engineering, filtration, lightweight and strong nanocomposite materials, and energy storage. However, there is a lack of information on the potential health effects of graphene in humans based on inhalation, the primary engineered nanomaterial exposure pathway in workplaces. Thus, an inhalation toxicology study of graphene was conducted using a nose-only inhalation system for 28 days (6 h/day and 5 days/week) with male Sprague-Dawley rats that were then allowed to recover for 1-, 28-, and 90-day post-exposure period. Animals were separated into 4 groups (control, low, moderate, and high) with 15 male rats (5 rats per time point) in each group. The measured mass concentrations for the low, moderate, and high exposure groups were 0.12, 0.47, and 1.88 mg/m(3), respectively, very close to target concentrations of 0.125, 0.5, and 2 mg/m(3). Airborne graphene exposure was monitored using several real-time instrumentation over 10 nm to 20 μm for size distribution and number concentration. The total and respirable elemental carbon concentrations were also measured using filter sampling. Graphene in the air and biological media was traced using transmission electron microscopy. In addition to mortality and clinical observations, the body weights and food consumption were recorded weekly. At the end of the study, the rats were subjected to a full necropsy, blood samples were collected for blood biochemical tests, and the organ weights were measured. No dose-dependent effects were recorded for the body weights, organ weights, bronchoalveolar lavage fluid inflammatory markers, and blood biochemical parameters at 1-day post-exposure and 28-day post-exposure. The inhaled graphenes were mostly ingested by macrophages. No distinct lung pathology was observed at the 1-, 28- and 90-day post-exposure. The inhaled graphene was translocated to lung lymph nodes. The results of this 28-day graphene inhalation study suggest low toxicity and a NOAEL of no less than 1.88 mg/m(3).

Proteomic analyses of early response of unicellular eukaryotic microorganism Tetrahymena thermophila exposed to TiO₂ particles

Key biological functions involved in cell survival have been studied to understand the difference between the impact of exposure to TiO2 nanoparticles (TiO2-NPs) and their bulk counterparts (bulk-TiO2). By selecting a unicellular eukaryotic model organism and applying proteomic analysis an overview of the possible impact of exposure could be obtained. In this study, we investigated the early response of unicellular eukaryotic protozoan Tetrahymena thermophila exposed to TiO2-NPs or bulk-TiO2 particles at subtoxic concentrations for this organism. The proteomic analysis based on 2DE + nLC-ESI-MS/MS revealed 930 distinct protein spots, among which 77 were differentially expressed and 18 were unambiguously identified. We identified alterations in metabolic pathways, including lipid and fatty acid metabolism, purine metabolism and energetic metabolism, as well as salt stress and protein degradation. This proteomic study is consistent with our previous findings, where the early response of T. thermophila to subtoxic concentrations of TiO2 particles included alterations in lipid and fatty acid metabolism and ion regulation. The response to the lowest TiO2-NPs concentration differed significantly from the response to higher TiO2-NPs concentration and both bulk-TiO2 concentrations. Alterations on the physiological landscape were significant after exposure to both nano- and bulk-TiO2; however, no toxic effects were evidenced even at very high exposure concentrations. This study confirms the relevance of the alteration of the lipid profile and lipid metabolism in understanding the early impact of TiO2-NPs in eukaryotic cells, for example, phagocytosing cells like macrophages and ciliated cells in the respiratory epithelium.

5-Day repeated inhalation and 28-day post-exposure study of graphene

Graphene has recently been attracting increasing attention due to its unique electronic and chemical properties and many potential applications in such fields as semiconductors, energy storage, flexible electronics, biosensors and medical imaging. However, the toxicity of graphene in the case of human exposure has not yet been clarified. Thus, a 5-day repeated inhalation toxicity study of graphene was conducted using a nose-only inhalation system for male Sprague-Dawley rats. A total of three groups (20 rats per group) were compared: (1) control (ambient air), (2) low concentration (0.68 ± 0.14 mg/m(3) graphene) and (3) high concentration (3.86 ± 0.94 mg/m(3) graphene). The rats were exposed to graphene for 6 h/day for 5 days, followed by recovery for 1, 3, 7 or 28 days. The bioaccumulation and macrophage ingestion of the graphene were evaluated in the rat lungs. The exposure to graphene did not change the body weights or organ weights of the rats after the 5-day exposure and during the recovery period. No statistically significant difference was observed in the levels of lactate dehydrogenase, protein and albumin between the exposed and control groups. However, graphene ingestion by alveolar macrophages was observed in the exposed groups. Therefore, these results suggest that the 5-day repeated exposure to graphene only had a minimal toxic effect at the concentrations and time points used in this study.

Effects of nickel-oxide nanoparticle pre-exposure dispersion status on bioactivity in the mouse lung

Nanotechnology is emerging as one of the world's most promising new technologies. From a toxicology perspective, nanoparticles possess two features that promote their bioactivity. The first involves physical-chemical characteristics of the nanoparticle, which include the surface area of the nanoparticle. The second feature is the ability of the nanoparticle to traverse cell membranes. These two important nanoparticle characteristics are greatly influenced by placing nanoparticles in liquid medium prior to animal exposure. Nanoparticles tend to agglomerate and clump in suspension, making it difficult to reproducibly deliver them for in vivo or in vitro experiments, possibly affecting experimental variability. Thus, we hypothesize that nanoparticle dispersion status will correlate with the in vivo bioactivity/toxicity of the particle. To test our hypothesis, nano-sized nickel oxide was suspended in four different dispersion media (phosphate-buffered saline (PBS), dispersion medium (DM), a combination of dipalmitoyl-phosphatidyl choline (DPPC) and albumin in concentrations that mimic diluted alveolar lining fluid), Survanta®, or pluronic (Pluronic F-68). Well-dispersed and poorly dispersed suspensions were generated in each media by varying sonication time on ice utilizing a Branson Sonifer 450 (25W continuous output, 20 min or 5 min, respectively). Mice (male, C57BL/6J, 7-weeks-old) were given 0-80 µg/mouse of nano-sized nickel oxide in the different states of dispersion via pharyngeal aspiration. At 1 and 7 d post-exposure, mice underwent whole lung lavage to assess pulmonary inflammation and injury as a function of dispersion status, dose and time. The results show that pre-exposure dispersion status correlates with pulmonary inflammation and injury. These results indicate that a greater degree of pre-exposure dispersion increases pulmonary inflammation and cytotoxicity, as well as decreases in the integrity of the blood-gas barrier in the lung.

A fruit fly in the nanoworld: once again Drosophila contributes to environment and human health

Drosophila was the most important model organism used in the fields of medicine and biology over the last century. Recently, Drosophila was successfully used in several studies in the field of nanotoxicology. However, only a part of its potential has been exploited in this field until now. In fact, apart from macroscopic observations of the effect due to the interaction between nanomaterials and living organism (i.e. lifespan, fertility, phenotypic aberrations, etc.), Drosophila has the potential to be a very useful tool to deeply analyze the molecular pathways involved in response to the interactions at nano-bio level. The aim of this editorial is to encourage the use of Drosophila by the different research groups working in the fields of nanotoxicology and nanomedicine, in order to define the effects induced by nanomaterials at molecular level for their subsequent exploitation in the field of nanomedicine.

Meeting report: hazard assessment for nanoparticles--report from an interdisciplinary workshop

In this report we present the findings from a nanotoxicology workshop held 6-7 April 2006 at the Woodrow Wilson International Center for Scholars in Washington, DC. Over 2 days, 26 scientists from government, academia, industry, and nonprofit organizations addressed two specific questions: what information is needed to understand the human health impact of engineered nanoparticles and how is this information best obtained? To assess hazards of nanoparticles in the near-term, most participants noted the need to use existing in vivo toxicologic tests because of their greater familiarity and interpretability. For all types of toxicology tests, the best measures of nanoparticle dose need to be determined. Most participants agreed that a standard set of nanoparticles should be validated by laboratories worldwide and made available for benchmarking tests of other newly created nanoparticles. The group concluded that a battery of tests should be developed to uncover particularly hazardous properties. Given the large number of diverse materials, most participants favored a tiered approach. Over the long term, research aimed at developing a mechanistic understanding of the numerous characteristics that influence nanoparticle toxicity was deemed essential. Predicting the potential toxicity of emerging nanoparticles will require hypothesis-driven research that elucidates how physicochemical parameters influence toxic effects on biological systems. Research needs should be determined in the context of the current availability of testing methods for nanoscale particles. Finally, the group identified general policy and strategic opportunities to accelerate the development and implementation of testing protocols and ensure that the information generated is translated effectively for all stakeholders.

Instillation of six different ultrafine carbon particles indicates a surface area threshold dose for acute lung inflammation in mice

Increased levels of particulate air pollution are associated with increased respiratory and cardiovascular mortality and morbidity. Some epidemiologic and toxicologic research suggests ultrafine particles (UFPs) (< 100 nm) to be more harmful per unit mass than larger particles. Our study was aimed at a quantitative comparison of acute adverse effects of different types of carbonaceous UFPs at a dose range that causes a moderate inflammatory response in lungs. We used six different particle types (primary particle size 10-50 nm, specific surface area 30-800 m2/g, and organic content 1-20%): PrintexG, Printex90, flame soot particles with different organic content (SootL, SootH), spark-generated ultrafine carbon particles (ufCP), and the reference diesel exhaust particles (DEP) SRM1650a. Mice were instilled with 5, 20, and 50 microg of each particle type, and bronchoalveolar lavage was analyzed 24 hr after instillation for inflammatory cells and the level of proinflammatory cytokines. At respective mass-doses, particle-caused detrimental effects ranked in the following order: ufCP > SootL > or = SootH > Printex90 > PrintexG > DEP. Relating the inflammatory effects to the particle characteristics--organic content, primary particle size, or specific surface area--demonstrates the most obvious dose response for particle surface area. Our study suggests that the surface area measurement developed by Brunauer, Emmett, and Teller is a valuable reference unit for the assessment of causative health effects for carbonaceous UFPs. Additionally, we demonstrated the existence of a threshold for the particle surface area at an instilled dose of approximately 20 cm2, below which no acute proinflammatory responses could be detected in mice.