Identification of the Solid Stem Suppressor Gene Su-TdDof in Synthetic Hexaploid Wheat Syn-SAU-117

Lodging is one of the most important factors affecting the high and stable yield of wheat worldwide. Solid-stemmed wheat has higher stem strength and lodging resistance than hollow-stemmed wheat does. There are many solid-stemmed varieties, landraces, and old varieties of durum wheat. However, the transfer of solid stem genes from durum wheat is suppressed by a suppressor gene located on chromosome 3D in common wheat, and only hollow-stemmed lines have been created. However, synthetic hexaploid wheat can serve as a bridge for transferring solid stem genes from tetraploid wheat to common wheat. In this study, the F1, F2, and F2:3 generations of a cross between solid-stemmed Syn-SAU-119 and semisolid-stemmed Syn-SAU-117 were developed. A single dominant gene, which was tentatively designated Su-TdDof and suppresses stem solidity, was identified in synthetic hexaploid wheat Syn-SAU-117 by using genetic analysis. By using bulked segregant RNA-seq (BSR-seq) analysis, Su-TdDof was mapped to chromosome 7DS and flanked by markers KASP-669 and KASP-1055 within a 4.53 cM genetic interval corresponding to 3.86 Mb and 2.29 Mb physical regions in the Chinese Spring (IWGSC RefSeq v1.1) and Ae. tauschii (AL8/78 v4.0) genomes, respectively, in which three genes related to solid stem development were annotated. Su-TdDof differed from a previously reported solid stem suppressor gene based on its origin and position. Su-TdDof would provide a valuable example for research on the suppression phenomenon. The flanking markers developed in this study might be useful for screening Ae. tauschii accessions with no suppressor gene (Su-TdDof) to develop more synthetic hexaploid wheat lines for the breeding of lodging resistance in wheat and further cloning the suppressor gene Su-TdDof.

Spruce Balm-Based Semisolid Vehicles for Wound Healing: Effect of Excipients on Rheological Properties and Ex Vivo Skin Permeation

The treatment of chronic wounds, an important issue with the growing elderly population, is increasingly hindered by antibiotic resistance. Alternative wound care approaches involve the use of traditional plant-derived remedies, such as purified spruce balm (PSB), with antimicrobial effects and the promotion of cell proliferation. However, spruce balm is difficult to formulate due to its stickiness and high viscosity; dermal products with satisfying technological properties and the scientific literature on this topic are scarce. Thus, the aim of the present work was to develop and rheologically characterize a range of PSB-based dermal formulations with different hydrophilic/lipophilic compositions. Mono- and biphasic semisolid formulations based on different compounds (petrolatum, paraffin oil, wool wax, castor oil, and water) were developed and characterized by their organoleptic and rheological measurements. A chromatographic method of analysis was established, and skin permeation data were collected for pivotal compounds. The results showed that the dynamic viscosity ranged from 10 to 70 Pas at 10/s for the different shear-thinning systems. The best formulation properties were observed for water-free wool wax/castor oil systems with 20% w/w PSB followed by different water-in-oil cream systems. Skin permeation through porcine skin was observed for different PSB compounds (e.g., pinoresinol, dehydroabietic acid, and 15-hydroxy-dehydroabietic acid) using Franz-type diffusion cells. The permeation potential of wool wax/castor oil- and lard-based formulations was shown for all the analyzed substance classes. The varying content of pivotal compounds in different PSB batches collected at different timepoints from different spruce individuals might have contributed to observed differences in vehicle performance.

Realizing the High Q-Factor of a CSIW Microwave Resonator Based on an MDGS for Semisolid Material Characterization

In this work, the high-quality factor (Q-factor) and high sensitivity of a circular substrate-integrated waveguide (CSIW) are proposed for the characterization of semisolid materials. The modeled sensor was designed based on the CSIW structure with a mill-shaped defective ground structure (MDGS) to improve measurement sensitivity. The designed sensor oscillates at a single frequency of 2.45 GHz, which was simulated using an Ansys HFSS simulator. Electromagnetic simulation explains the basis of the mode resonance of all two-port resonators. Six variations of the materials under test (SUTs) were simulated and measured, including air (without an SUT), Javanese turmeric, mango ginger, black turmeric, turmeric, and distilled water (DI). A detailed sensitivity calculation was performed for the resonance band at 2.45 GHz. The SUT test mechanism was performed using a polypropylene tube (PP). The samples of dielectric material were filled into the channels of the PP tube and loaded into the center hole of the MDGS. The E-fields around the sensor affect the relationship with the SUTs, resulting in a high Q-factor value. The final sensor had a Q-factor of 700 and a sensitivity of 2.864 at 2.45 GHz. Due to the high sensitivity of the presented sensor for characterization of various semisolid penetrations, the sensor is also of interest for accurate estimation of solute concentration in liquid media. Finally, the relationship between the loss tangent, permittivity, and Q-factor at the resonant frequency were derived and investigated. These results make the presented resonator ideal for the characterization of semisolid materials.

Regulatory Requirements for the Development of Second-Entry Semisolid Topical Products in the European Union

The development of second-entry topical products is hampered by several factors. The excipient composition should be similar to the reference product because excipients may also contribute to efficacy. Conventional pharmacokinetic bioequivalence studies were not considered acceptable because drug concentrations are measured downstream after the site of action. There was no agreed methodology to characterize the microstructure of semisolids, and waivers of therapeutic equivalence studies with clinical endpoints were not possible. Only the vasoconstrictor assay for corticosteroids was accepted as a surrogate. This paper describes the implementation of the European Union's stepwise approach for locally acting products to cutaneous products, discusses the equivalence requirements of the EMA Draft Guideline on the Quality and Equivalence of Topical Products, and compares them with the US Food and Drug Administration recommendations. Step 1 includes the possibility of waivers for simple formulations based on in vitro data only (Q1 + Q2 + Q3 + IVRT). Step 2 includes step 1 requirements plus a kinetic study (TS/IVPT/PKBE) to compare the local availability of complex formulations. Step 3 refers to clinical studies with pharmacodynamic/clinical endpoints. As excipients may affect the local tolerability and efficacy of the products, the similarity of excipient composition is required in all steps, except where clinical endpoints are compared.

Tailoring thixotropic mixed-lipid nanoconstructs of voriconazole for the management of Vulvovaginal candidiasis: Formulation, statistical optimization, in vitro characterization and in vivo assessment

Vulvovaginal candidiasis is a pervasive gynecological condition among women worldwide due to infection recurrence and resistance to conventional drugs. This calls for a novel formulation of alternative medication and with enhanced efficacy. This study aimed to fabricate mixed-lipid nanoconstructs (MLNCs) of voriconazole (VCZ) with a low concentration of lipids applying high shear homogenization and ultrasonication to form a semisolid formulation. Tefose 63 and Gelot 64 were employed as emulsifiers that are specified for vaginal preparations; as per their mucoadhesive properties and their texture enhancing characters, although usually used as lipids in different lipid carriers. A 2⁴ factorial design was established and the optimized formulation was prepared using 10% total lipids, in which solid lipids (Sterotex NF: Glyceryl monostearate) ratio was 1.92:1 and the oils percentage was 30% (Maisine: Glyceryl monooleate, in the ratio of 1:1), and the emulsifiers mixture (Tefose 63: Gelot 64) ratio was 1:1, as 10% of total formulation weight. The optimized formulation with a viscosity of 964.49 ± 57.99 cp showed spherical nanoparticles (322.72 ± 15.11 nm) that entrapped 67.16 ± 3.45% of VCZ and exhibited release of 70.08 ± 2.87% in 8 h. The optimized formulation with high bioadhesive potentials significantly reduced the fungal burden in female Wistar rats infected with vaginal candidiasis, compared to the aqueous VCZ suspension (p < .05). Furthermore, in vivo histopathological findings proved the effectiveness and the safety of the optimized MLNCs formulation after vaginal application. Inclusively, MLNCs formulation could be a promising vaginal delivery system of VCZ for the treatment of vulvovaginal candidiasis.

High-Capacity CuSi2P3-Based Semisolid Anolyte for Redox Flow Batteries

Redox flow batteries (RFBs) have attracted more attention due to their ability of decoupling energy and power, but their low energy density has greatly restricted their applications. Semisolid flow batteries (SSFBs) are a kind of RFBs, but they have high energy density. However, there is a lack of research on semisolid anolytes, and thus the application of SSFBs is still in its infancy. In this work, a low-potential (0.6 V vs Li/Li⁺) CuSi₂P₃@C-LiPAA composite is synthesized through a simple high-energy mechanical ball milling and impregnation method based on the CuSi₂P₃ (CSP) compound; then, it is used to prepare a semisolid anolyte, which is able to achieve a high volumetric capacity of 400 Ah L^-1 in static mode and 320 Ah L^-1 in intermittent-flow mode. This is the highest volumetric capacity of anolyte so far. The effect of adding binder to a composite is also discussed for the first time, which makes the connection between the composite particles closer and the semisolid suspension more uniform so as to obtain stable electrochemical performance. At the same time, through pairing respectively with two types of catholytes, liquid 10-methylphenothiazine (MPT) and semisolid LiFePO₄ (LFP), a single-cell voltage of 3 V and more than 100 stable cycles with the Coulombic efficiency of 99% have been achieved by CSP-MPT and CSP-LFP full-cell systems. The result fully demonstrates the applicability of the prepared CSP semisolid anolyte. The synthesis method of adding a binder to the composite in this work also provides a direction for optimizing the suspension for other active materials to be applied to SSFBs in the future.

A Huge Hemorrhagic Epidermoid Cyst of the Perineum with Hypoechoic Semisolid Ultrasonographic Feature Mimicking Scar Endometriosis

Epidermoid cysts are small, solitary, and slow-growing lesions that rarely appear in the perineum and mostly arise because of trauma. This study examined a huge perineal epidermoid cyst that slowly grew over eight years in a premenopausal woman. Ultrasonography showed that the hemorrhage in the cyst was a semisolid hypoechoic mass, which mimicked endometrioma, and was tentatively diagnosed as scar endometriosis in the perineum after vaginal delivery. This case study highlights the importance of wide surgical excision and histopathologic diagnosis, even with typical ultrasonography and surgical findings.

Semisolid vs Liquid Nutrients and 30-Day Readmission in Gastrostomy Tube-Fed Patients: A Propensity-Matched Analysis

BACKGROUND

Semisolid nutrients have been widely used to prevent complications related to enteral nutrition (EN) in Japan. However, there are few data on the effect of feeding semisolid nutrient preparations. We compared 30-day readmission rates of gastrostomy tube-fed patients who had been prescribed semisolid vs liquid nutrients on discharge.

METHODS

This is a retrospective observational study using a Japanese nationwide inpatient database of data entered between June 2014 and March 2018. We identified patients aged ≥18 years who had received EN through gastrostomy during hospitalization. Patients were classified as having been prescribed semisolid vs liquid EN on discharge. After one-to-one propensity score matching, all-cause 30-day readmission rates were compared between the 2 groups.

RESULTS

In total, 5331 patients were identified, including a semisolid-nutrients group (n = 2089) and a liquid-nutrients group (n = 3242). Propensity score matching created 1912 pairs. The 30-day readmission rates were 15.6% and 13.9% in the semisolid-nutrients and liquid-nutrients groups, respectively. No significant difference was observed between the groups (risk difference, 1.7%; 95% CI, -0.6 to 4.0%; P = .14).

CONCLUSION

All-cause 30-day readmission of patients receiving gastrostomy tube feeding did not differ between those prescribed semisolid vs liquid nutrients on discharge. Randomized controlled trials are needed to accurately determine the effect of semisolid nutrients on clinical outcomes.

Perspectives on Physicochemical and In Vitro Profiling of Ophthalmic Ointments

Ophthalmic ointments are unique in that they combine features of topical drug delivery, the ophthalmic route and ointment (semisolid) formulations. Accordingly, these complex formulations are challenging to develop and evaluate and therefore it is critically important to understand their physicochemical properties as well as their in vitro drug release characteristics. Previous reports on the characterization of ophthalmic ointments are very limited. Although there are FDA guidance documents and USP monographs covering some aspects of semisolid formulations, there are no FDA guidance documents nor any USP monographs for ophthalmic ointments. This review summarizes the physicochemical and in vitro profiling methods that have been previously reported for ophthalmic ointments. Specifically, insight is provided into physicochemical characterization (rheological parameters, drug content and content uniformity, and particle size of the API in the finished ointments) as well as important considerations (membranes, release media, method comparison, release kinetics and discriminatory ability) in in vitro release testing (IVRT) method development for ophthalmic ointments. Graphical Abstract Summary of the physicochemcial profiling and in vitro drug release testing (IVRT) for ophthalmic ointments.

Tailoring Formulations for Intranasal Nose-to-Brain Delivery: A Review on Architecture, Physico-Chemical Characteristics and Mucociliary Clearance of the Nasal Olfactory Mucosa

The blood-brain barrier and the blood-cerebrospinal fluid barrier are major obstacles in central nervous system (CNS) drug delivery, since they block most molecules from entering the brain. Alternative drug delivery routes like intraparenchymal or intrathecal are invasive methods with a remaining risk of infections. In contrast, nose-to-brain delivery is a minimally invasive drug administration pathway, which bypasses the blood-brain barrier as the drug is directed from the nasal cavity to the brain. In particular, the skull base located at the roof of the nasal cavity is in close vicinity to the CNS. This area is covered with olfactory mucosa. To design and tailor suitable formulations for nose-to-brain drug delivery, the architecture, structure and physico-chemical characteristics of the mucosa are important criteria. Hence, here we review the state-of-the-art knowledge about the characteristics of the nasal and, in particular, the olfactory mucosa needed for a rational design of intranasal formulations and dosage forms. Also, the information is suitable for the development of systemic or local intranasal drug delivery as well as for intranasal vaccinations.

In vivo efficacy and properties of semisolid formulations containing panthenol

BACKGROUND

Panthenol is an active substance used in dermatology to protect the health of the skin, to treat defects in the morphology of the stratum corneum. In cosmetology, hydrating, softening, and barrier function of panthenol are utilized. Detailed studies evaluating the efficacy of panthenol in cosmetic and pharmaceutical semisolid formulations and establishing its optimum concentration are needed.

OBJECTIVES

To investigate whether an addition of 5-13 wt% panthenol in o/w and w/o emulsions increases hydration and supports the barrier properties of the skin. Rheological properties and sensory analysis of prepared formulations are supplemented.

METHODS

Noninvasive instrumental methods in vivo were used. The hydration and barrier effect of semisolid formulations on the skin were observed for 48 hour; testing was conducted on 40 women. The effect was compared with formulations without any content of panthenol. The rheological and organoleptic properties of the formulations were evaluated.

RESULTS

After applying either form of the formulations containing 7-11 wt% of panthenol hydration of the skin increased, transepidermal water loss decreased. pH of the skin shifted toward neutral after application of tested formulations. The rheological properties of the formulations were influenced by the type of vehicle, the amount of panthenol, and temperature. Sensory evaluation of both semisolid forms revealed statistically significant differences in o/w formulations with regard to spreadability.

CONCLUSIONS

The presence of panthenol in an o/w and w/o semisolid formulations significantly enhances skin barrier repair and hydration of the stratum corneum. Better vehicle for the active substance as regards hydration proved o/w formulations.

All-in-One Gel-Based Electrochromic Devices: Strengths and Recent Developments

Electrochromic devices (ECDs) have aroused great interest because of their potential applicability in displays and smart systems, including windows, rearview mirrors, and helmet visors. In the last decades, different device structures and materials have been proposed to meet the requirements of commercial applications to boost market entry. To this end, employing simple device architectures and achieving a competitive electrolyte are crucial to accomplish easily implementable, high-performance ECDs. The present review outlines devices comprising gel electrolytes as a single electroactive layer ("all-in-one") ECD architecture, highlighting some advantages and opportunities they offer over other electrochromic systems. In this context, gel electrolytes not only overcome the drawbacks of liquid and solid electrolytes, such as liquid's low chemical stability and risk of leaking and soil's slow switching and lack of transparency, but also exhibit further strengths. These include easier processability, suitability for flexible substrates, and improved stabilization of the chemical species involved in redox processes, leading to better cyclability and opening wide possibilities to extend the electrochromic color palette, as discussed herein. Finally, conclusions and outlook are provided.