Trochanteric Claw Plate Fixation for Greater Trochanteric Fracture or Osteotomy in Total Hip Arthroplasty

This study retrospectively evaluated 41 consecutive open reductions and internal fixations following primary or revision total hip arthroplasty, which required trochanteric claw plate fixation for greater trochanteric fracture or osteotomy between January 2008 and December 2020. The mean duration of clinical follow-up was 4.2 years (range, 1-13 years). The patients included 13 men and 28 women, with a mean age of 68 years (range, 32-87 years). The indications for intervention included trochanteric osteotomy, intraoperative fracture, and non-union including postoperative fracture in 6, 9, and 26 cases, respectively. The mean Merle d'Aubigné Clinical Score improved from 9.4 points (range, 5-15 points) pre-operatively, to 14.3 points (range, 9-18 points) at the last follow-up. Bone union occurred in 35 cases (85%), while implant breakage occurred in four cases. At the last follow-up, the mean Merle d'Aubigné Clinical Scores of bone union and non-union were 15.3 and 14.1, respectively (p=0.48). The Kaplan-Meier survival rate, with the endpoint being revision surgery for pain, non-union, dislocation, or implant breakage, at 10 years was 80.0% (95% confidence interval: 62.6-97.4%). Greater trochanteric fixation using a trochanteric claw plate yielded successful results.

Cerclage wire fixation of trochanteric osteotomies in complex hip revision: our experience and comparison with cable-plate fixation

INTRODUCTION

Osteotomy of the greater trochanter is a commonly used procedure in complex revision hip arthroplasty in order to achieve a wide exposure to the femoral stem and acetabular components. There is no clinical evidence in favour of a specific fixation method. The aim of this study was to compare cable-plate with figure-of-eight cerclage wire fixation in patients requiring a trochanteric "slide" osteotomy.

MATERIAL AND METHODS

In a retrospective study, 51 greater trochanteric "slide" osteotomies in complex acetabular revision arthroplasties were included. Patients were divided into 2 groups: 28 hips were fixed with 1 of 2 cable-plate systems (Dall-Miles staple, Stryker or Cable-Ready plate, Zimmer) and 23 with a figure-of-eight cerclage wire.Consolidation, osteolysis, migration of greater trochanter, bursitis of the trochanteric area, Trendelenburg gait and removal of osteosynthesis material were studied at 6 months follow-up.

RESULTS

Both groups showed good union rates. The lysis rate was similar with 32% in the cable-plate group versus 29% in the cerclage wire group (p = 0.084). 43% of the hips with cable-plate and 22% of the cerclage wire had trochanteric migration (p = 0.297). Pain at the greater trochanter was less frequent in the cerclage wire group (9%) as compared to the cable-plate group (43%) (p = 0.007). Implant removal was more frequent in the cable-plate group (4 vs. 0 patients). Trendelenburg gait was found in 3 patients in the cerclage wire group as compared to 10 in the cable-plate group (p = 0.054).

CONCLUSIONS

The cerclage wiring had superior clinical outcomes with similar radiographic results. The authors recommend the use of figure-of-eight cerclage wire when fixing a greater trochanteric "slide" osteotomy in complex revision hip arthroplasty.

Trochanteric osteotomy in revision total hip arthroplasty

Trochanteric osteotomy is a technique that allows expanded exposure and access to the femoral canal and acetabulum for a number of indications.There has been renewed interest in variants of this technique, including the trochanteric slide osteotomy (TSO), extended trochanter osteotomy (ETO), and the transfemoral approach, for both septic and aseptic revision total hip arthroplasty (THA).Osteotomy fixation is crucial for achieving union, and wire and cable-plate systems are the most common techniques.TSO involves the creation of a greater trochanter fragment with preserved abductor attachment proximally and vastus lateralis attachment distally.This technique may be particularly useful in the setting of abductor deficiency or when augmented acetabular exposure is needed.ETO is a posterior-laterally based extensile approach that has been successfully utilized for aseptic and septic indications; most series report a greater than 90% rate of union.The transfemoral approach, as known as the Wagner osteotomy, is an extensile femoral approach and is more anterior-based than the alternate posterior-based ETO. It may be particularly useful for anterior-based approaches and anterior femoral remodelling; rates of union after this approach in most reports have been close to 100%. Cite this article: EFORT Open Rev 2020;5:477-485. DOI: 10.1302/2058-5241.5.190063.

Does Trochanteric Osteotomy Length Affect the Amount of Proximal Trochanteric Migration During Revision Total Hip Arthroplasty?

BACKGROUND

Nonunion and proximal trochanteric migration is a known complication of trochanteric osteotomy. This study examines the effect of osteotomy length on proximal greater trochanter (GT) migration.

METHODS

We analyzed 113 modified trochanteric slide osteotomies and 73 extended trochanteric osteotomies performed between 2008 and 2016. All osteotomies were fixed using cerclage wires and had minimum 6-month radiographic follow-up. Spearman correlations were used to assess association between osteotomy length and GT migration distance. Chi-squared test and logistic regression were used to assess association between patient and surgical factors and GT migration >1 cm. Receiver operating characteristic curves were constructed to determine the optimal cutoff osteotomy length for predicting GT migration >1cm.

RESULTS

Mean osteotomy length was 6.1 cm (range 3-12) for modified trochanteric slide osteotomies and 14.8 cm (range 8-23) for extended trochanteric osteotomies. Osteotomy length was negatively correlated (r = -0.340, P < .001) with GT migration distance. Longer osteotomy length was protective against GT migration >1 cm (odds ratio 0.67, P = .002). Receiver operating characteristic curve analysis demonstrated an optimal cutoff osteotomy length of 9.8 cm for predicting GT migration >1 cm (sensitivity 0.971, specificity 0.461). Among osteotomies <10 cm, those fixed using at least one distal wire below the lesser trochanter and vastus ridge demonstrated less mean GT migration (3.86 vs 7.12 mm, P = .009) and higher mean union rate (68.8% vs 31.2%, P < .001).

CONCLUSION

Osteotomies shorter than 10 cm are at higher risk of developing proximal GT migration >1 cm. A distal cerclage wire below the lesser trochanter and vastus ridge may help decrease the amount of GT migration.

LEVEL OF EVIDENCE

Prognostic Level IV.

Greater Trochanteric Reattachment Using the Third-Generation Cable Plate System in Revision Total Hip Arthroplasty

BACKGROUND

The purpose of the study is to evaluate the radiologic and functional results of greater trochanteric reattachment using the third-generation cable plate system in revision total hip arthroplasty (THA).

METHODS

A total of 47 trochanteric fixations (27 men and 18 women; mean age of 60.2 years) using the third-generation cable plate system in revision THA were retrospectively evaluated. The mean follow-up was 80.4 months (range 27-148 months). The osteotomized greater trochanter was reattached using the Cable-Ready system (Zimmer, Warsaw, IN) and the Dall-Miles cable system (Stryker, Mahwah, NJ). The clinical results with Harris hip score, visual analog scale, and radiologic outcomes were evaluated.

RESULTS

The mean Harris hip score was improved from 55.7 (range 17-72) preoperatively to 90.8 (range 68-100; P = .001) postoperatively, and the mean pain score was improved from 6.6 (range 3-10) to 2.5 (range 0-6; P = .001), respectively. Nonunion was observed in 6 hips (12.7%). Migration of the osteotomized greater trochanteric fragment (>1 cm) was seen in 8 hips (17.0%). Cable breakage occurred in 13 cases (27.6%). Although 5 cable plate systems were removed, there was no need for reattachment of the greater trochanter in this study.

CONCLUSION

This study showed a relatively high incidence of radiologic failure after greater trochanteric reattachment using the cable plate system in revision THA, although reattachments were not required and clinical outcome was relatively satisfactory. Periodic and close observation for the early detection of failure is necessary.

Surgical treatment for Pipkin type IV femoral head fracture

PURPOSE

Pipkin type IV femoral head (FH) fracture was thought as poor prognosis. There were several surgical approaches and treatments for this difficult fracture. However, there was no one treatment superior to another. We reviewed a serious of patients with Pipkin type IV FH fracture underwent surgery via a modified Gibson approach.

METHODS

We reviewed a consecutive series of nine patients with Pipkin type IV FH fracture under surgery via a modified Gibson approach between 2012 and 2013. The surgical procedure was completely described, and the radiological outcome and the functional outcome were also reviewed.

RESULTS

The mean follow-up duration was 17 (12-30) months. The mean Merle d'Aubigne score was 16 (8-19). Seven patients had anatomical reductions, and two had imperfect reductions by Matta's grading. There was no early posttraumatic osteoarthritis during the follow-up period. One patient with early post-traumatic osteonecrosis 3 months after index surgery underwent total hip arthroplasty.

CONCLUSIONS

Through this surgery approach to fix the FH and the acetabulum, the radiological and the functional results were satisfactory. We still need more patients with prospective study to find an optimal surgical approach for Pipkin type IV FH fracture.

An improved method for cable grip fixation of the greater trochanter after trochanteric slide osteotomy

This study proposes a novel method for reattachment of the trochanteric slide osteotomy. The strength of this new fixation system was compared to established configurations. Fifteen sawbone femurs were used. Our configuration used cables above and below the lesser trochanter with a third cable around the shaft of the femur while passing the loose ends through the inferior hole of the cable grip. Displacement of the trochanter was measured with increasing load. Force required for catastrophic failure was also measured. The 3-cable construct resulted in significantly less displacement with increasing load and required a larger force to cause failure (1 cm and 2 cm). We theorize that our configuration produces a biomechanically stronger construct than previously used methods.