Search for Boosted Dark Matter in COSINE-100

We search for energetic electron recoil signals induced by boosted dark matter (BDM) from the galactic center using the COSINE-100 array of NaI(Tl) crystal detectors at the Yangyang Underground Laboratory. The signal would be an excess of events with energies above 4 MeV over the well-understood background. Because no excess of events are observed in a 97.7  kg·yr exposure, we set limits on BDM interactions under a variety of hypotheses. Notably, we explored the dark photon parameter space, leading to competitive limits compared to direct dark photon search experiments, particularly for dark photon masses below 4 MeV and considering the invisible decay mode. Furthermore, by comparing our results with a previous BDM search conducted by the Super-Kamionkande experiment, we found that the COSINE-100 detector has advantages in searching for low-mass dark matter. This analysis demonstrates the potential of the COSINE-100 detector to search for MeV electron recoil signals produced by the dark sector particle interactions.

Self-Assembled Nanostructures of Homo-Oligopeptide as a Potent Ice Growth Inhibitor

This study reports the formation of self-assembled nanostructures with homo-oligopeptides consisting of amino acids (i.e., alanine, threonine, valine, and tyrosine), the resulting morphologies (i.e., spherical shape, layered structure, and wire structure) in aqueous solution, and their potential as ice growth inhibitors. Among the homo-oligopeptides investigated, an alanine homo-oligopeptide (n = 5) with a spherical nanostructure showed the highest ice recrystallization inhibition (IRI) activity without showing a burst ice growth property and with low ice nucleation activity. The presence of nanoscale self-assembled structures in the solution showed superior IRI activity compared to an amino acid monomer because of the higher binding affinity of structures on the growing ice crystal plane. Simulation results revealed that the presence of nanostructures induced a significant inhibition of ice growth and increased lifetime of hydrogen bonding compared with unassembled homo-oligopeptide. These results envision extraordinary performance for self-assembled nanostructures as a desirable and potent ice growth inhibitor.

First Dark Matter Search Results from the LUX-ZEPLIN (LZ) Experiment

The LUX-ZEPLIN experiment is a dark matter detector centered on a dual-phase xenon time projection chamber operating at the Sanford Underground Research Facility in Lead, South Dakota, USA. This Letter reports results from LUX-ZEPLIN's first search for weakly interacting massive particles (WIMPs) with an exposure of 60 live days using a fiducial mass of 5.5 t. A profile-likelihood ratio analysis shows the data to be consistent with a background-only hypothesis, setting new limits on spin-independent WIMP-nucleon, spin-dependent WIMP-neutron, and spin-dependent WIMP-proton cross sections for WIMP masses above 9  GeV/c^{2}. The most stringent limit is set for spin-independent scattering at 36  GeV/c^{2}, rejecting cross sections above 9.2×10^{-48}  cm at the 90% confidence level.

Detection efficiency calibration for an array of fourteen HPGe detectors

The CUP array of germanium (CAGe) is an array of fourteen high-purity germanium (HPGe) detectors. The detection efficiency of full-energy-peak emitted from the various samples assayed on the CAGe was calculated using the Monte Carlo simulation toolkit GEANT4. If the dead layer on the surface of the crystal is treated in the simulation as a continuous part of the active crystal, then the detection efficiency will be overestimated. Thus, the detection efficiency of the CAGe was adjusted using multi-nuclide source data and Monte Carlo simulations. The gamma spectra of the known activity source were obtained for each HPGe detector of the CAGe. The detection efficiency measured by the multi-source data was smaller than that of simulation data if the simulation treated the whole volume of germanium crystals as active for gamma detection. By optimizing the dead layers' thicknesses in the simulation, the detection efficiency calculated by the simulation could be matched to that of multi-source data.

Precise control over the silica shell thickness and finding the optimal thickness for the peak heat diffusion property of AuNR@SiO2

Silica-coated gold nanorods (AuNRs) exhibit significantly enhanced photothermal effects and photoacoustic (PA) signal intensities, which is beneficial for various nanophotonic applications in materials science. However, the silica shell thickness for optimum enhancement is not fully understood and is even controversial depending on the physical state of the silica shell. This is because of the lack of systematic investigations of the nanoscale silica shell thickness and the photothermal effect. This study provides a robust synthetic method to control the silica shell thickness at the nanoscale and the physical state-dependent heat diffusion property. The selected base and solvent system enabled the production of silica-coated AuNRs (AuNR@SiO₂) with silica shell thicknesses of 5, 10, 15, 20, 25, 30, 35, and 40 nm. AuNRs with a 20 nm silica shell showed the highest photothermal effect with a 1.45-times higher photothermal efficiency than that of AuNRs without a silica shell. The low density of the silica shell on the AuNRs showed a low photothermal effect and photostability. It was found that the disruption of cetyltrimethyl ammonium bromide (CTAB) layers on the AuNRs was responsible for the low photostability of the AuNRs. The simulation study for the heat diffusion property showed facilitated heat diffusion in the presence of a 20 nm silica shell. In a cell-based study, AuNRs with a 20 nm silica shell showed the most sensitive photothermal effect for cell death. The results of this robust study can provide conclusive conditions for the optimal silica shell thickness to obtain the highest photothermal effect, which will be useful for the future design of nanomaterials in various fields of application.

Real-time surface-enhanced Raman scattering-based live cell monitoring of the changes in mitochondrial membrane potential

Obtaining molecular information on cells in real time has been a critical challenge in studying the interaction between molecules of interest and intracellular components. Fluorescence-based methods have long served as excellent tools to study such important interactions. In this paper, we introduce a Raman scattering-based method as a promising platform to achieve the real-time monitoring of subtle molecular changes occurring within cells. We found that the Raman scattering-based method enabled monitoring changes in the mitochondrial membrane potential at the single-cell level in rheumatoid arthritis synovial fibroblasts induced by tumor necrosis factor-alpha (TNF-α) protein, various chemicals (MgCl₂, FCCP, and sodium pyruvate), and a non-chemical stimulus (i.e., light). The triphenylphosphine-modified gold nanoparticles were selectively localized in the mitochondria and showed the characteristic Raman spectrum of cytochrome C and other Raman spectra of molecular components inside the cell. The surface-enhanced Raman spectrum originating from mitochondria was sensitively changed over time when mitochondrial depolarization was induced by the addition of TNF-α, or chemicals known to induce mitochondrial depolarization. The Raman-based signal changes were well matched with results of the conventional fluorescence-based analysis. However, in contrast to the conventional approach, the Raman-based method enables monitoring such changes in real time and provides detailed molecular information in terms of the interaction of molecules. Therefore, these results highlight the possibility of surface-enhanced Raman scattering-based live cell analysis for future proteomics or drug-screening applications.

Solution-Based One-Step Preparation of Three-Dimensional Self-Assembled Octadecyl Silica Nanosquare Plate and Microlamella Structures for Superhydrophobic and Icephobic Surfaces

Icephobic surfaces have gained immense attention owing to their significant roles in decreasing the energy consumption of refrigerators and in improving safety issues by preventing the formation of ice on them. Superhydrophobic surfaces incorporating micro- or nanoscale roughness and hydrophobic functional groups have been shown to prevent ice accumulation. Herein, we report a simple, low-cost, and solution-based one-step process for the production of superhydrophobic surfaces with three-dimensional (3D) self-assembled structures. The controlled hydrolysis and polycondensation of n-octadecyltrichlorosilane (OTS-Cl) in an acetone solution produced a highly uniform superhydrophobic surface on various substrates such as glass, metals, and polymers without the limitation of the surface curvature structure. The as-prepared 3D self-assembled surface exhibited a very high contact angle of 161.7° and a low contact hysteresis of 1.47°. The solvent type, H₂O content in acetone, and carbon chain length of the silane compound were critical in the formation of self-assembled nanostructures. The thickness of the superhydrophobic 3D self-assembled structure could be varied by controlling the surface properties of the glass substrate. In addition, a novel octadecyl silica nanosquare plate structure was formed as an intermediate for the microlamella structure. The water drop impact experiments on the 3D self-assembled superhydrophobic glass substrates at low temperatures (T < -25 °C) showed that the as-prepared superhydrophobic glass possessed a high impalement threshold for water contact, resulting in excellent and stable icephobic properties. The preparation method proposed in this study is scalable and can be used on a flat glass surface or in a glass vial inside a glass tube. Moreover, it can be applied to various substrates such as metals and polyurethane surfaces with curvature. Therefore, the solution-based self-assembly method proposed in this study is a promising approach to produce superhydrophobic and icephobic surfaces on a wide range of substrates regardless of their structure and properties.

Hyperattenuating lesions after mechanical thrombectomy in acute ischaemic stroke: factors predicting symptomatic haemorrhage and clinical outcomes

AIM

To evaluate the clinical significance of hyperattenuating lesions on CT after mechanical thrombectomy for acute ischaemic stroke, and to identify imaging factors that predict symptomatic haemorrhage and unfavourable outcomes.

MATERIALS AND METHODS

Seventy-eight patients with acute ischaemic stroke in the anterior circulation who underwent mechanical thrombectomy were evaluated. All patients underwent post-interventional unenhanced computed tomography (CT) within 24 h and follow-up CT or magnetic resonance imaging (MRI) within 7 days. Baseline characteristics and clinical outcomes were compared between patients with and without hyperattenuating lesions. In patients with hyperattenuating lesions, clinical and imaging factors that predict symptomatic haemorrhage and unfavourable outcomes were determined.

RESULTS

Fifty-six of 78 patients (71.8%) demonstrated hyperattenuating lesions on post-interventional CT. Patients with hyperattenuating lesions showed lower Alberta Stroke Program Early CT score (ASPECTS), persistent/symptomatic haemorrhage, and unfavourable outcomes than those without. In patients with hyperattenuating lesions, larger hyperattenuating lesion volume (>21.3 ml; OR, 55.60, p<0.001) and perilesional oedema (OR, 46.04, p=0.015) were independent factors predicting symptomatic haemorrhage. Older age (OR, 1.2, p=0.006) and lower ASPECTS (OR, 0.45, p=0.046) were independent factors predicting unfavourable outcomes in patients with hyperattenuating lesions. Adding the volume of the hyperattenuating lesion to age and ASPECTS increased the predictive performance of unfavourable outcomes (area under the curve 0.874 versus 0.934, p=0.043).

CONCLUSIONS

Hyperattenuating lesions on post-interventional CT are associated with increased risk of symptomatic haemorrhage and unfavourable outcomes. Larger hyperattenuating lesion volume is an independent factor of symptomatic haemorrhage and it has added predictive value for unfavourable outcomes.

Morphologic and morphometric characteristics of the adductor minimus in Korean: its topographic relationship with respect to neighboring anatomical structure and clinical significance

BACKGROUND

The aim of this study was to clarify the morphologic and morphometric characteristics of the adductor minimus (AMi) and to observe its topographic relationships relative to the adjacent anatomical structures.

MATERIALS AND METHODS

This study investigated 54 thighs of 27 Korean cadavers.

RESULTS

The AMi was a small and flat muscle observed in 94.4% of the specimens. It originated from the inferior ramus of the pubis as the upper part of the adductor magnus (AMa), and inserted from the lesser trochanter to the upper part of the linea aspera. The AMi was completely separate from the AMa in 63.0% of the specimens. The medial circumflex femoral artery was always found at the superior border of the AMi, while the first and second perforating arteries were found inferior to the muscle in 55.6% and 37.0% of specimens, respectively. A supernumerary muscle (SM) was found with the AMi in 42.6% of the specimens, and it originated from the inferior ramus of the pubis and inserted into the posterior side of the lesser trochanter. The obturator externus and AMi were found superoposterior and inferior to the SM, respectively, while the posterior branch of the obturator nerve passed underneath it.

CONCLUSIONS

The results of this study may provide physicians with the accurate anatomical knowledge that they require for managing groin pain and applying a regional nerve block with ultrasound guidance in this adductor region.

Association between body mass index and stroke severity in acute ischaemic stroke with non-valvular atrial fibrillation

BACKGROUND AND PURPOSE

The objective of this study was to investigate the association between body mass index (BMI) and both initial stroke severity at presentation and functional outcomes after acute ischaemic stroke (AIS) in patients with non-valvular atrial fibrillation (NVAF).

METHODS

Patients were categorized on the basis of their BMI into underweight (BMI <18.5, n = 111), normal (18.5 ≤ BMI <25, n = 1036) and overweight to obese (BMI ≥25, n = 472) groups. Initial stroke severity was assessed using the National Institutes of Health Stroke Scale (NIHSS) score and functional outcomes were assessed using the modified Rankin Scale score at discharge. The differences in stroke severity and functional outcomes were compared between groups using robust log-linear regression with a Poisson distribution and binary logistic regression analysis.

RESULTS

A total of 1619 AIS patients with NVAF from six hospitals were included. Compared with the NIHSS scores [median 5, interquartile range (IQR) 2-14] of normal-weight patients, the NIHSS scores (median 9, IQR 4-19) of underweight patients were more likely to be higher, whereas those of overweight to obese patients were lower (median 4, IQR 1-12) (P < 0.001). In terms of functional outcomes after stroke, underweight patients had a higher risk of poor functional outcomes (odds ratio 1.78, 95% confidence interval 1.09-2.56, P = 0.01) but overweight to obese patients had no significant difference in functional outcomes compared with normal-weight patients.

CONCLUSION

An inverse association was found between BMI and stroke severity in AIS patients with NVAF. This suggests the presence of an obesity paradox for short-term outcomes in patients with NVAF.

P997Improving left atrial appendage occluder size determination by using 3-dimensional printing model of the left atrial appendage

Introduction

Given the complexity of left atrial appendage (LAA) structure, current 2D based LAA occluder (LAAO) size prediction system using transesophageal echocardiography (TEE) has limitations.

Objective

To assess the accuracy of LAAO size determination method by implantation simulation using a 3D printed model compared with a conventional method based on TEE.

Methods

We retrospectively reviewed 57 cases with percutaneous LAAO using Amplatzer Cardiac Plug and Amulet from 2014 to 2018. We excluded cases without cardiac CT (21 cases) or with peri-device leakage or inappropriate position of the device on six months follow up TEE (6 cases), or with paroxysmal atrial fibrillation (2 cases). We finally included 28 cases with anatomically and physiologically properly implanted LAAO, using the final size of the implanted devices as a standard for the size prediction accuracy. We generated 3D printing model from cardiac CT images. LAAO size was determined with device implantation simulation using 3D printing model and occluder devices (Figure C), and conventional 2D TEE measurements by two experienced cardiologists who were blinded to the size of the finally implanted device.

Results

The accuracy in size of 3D printed left atrium (LA) models, compared with CT image sources, were validated by measuring the distance between artifacts which were intentionally implanted to LA model during image processing. There was minimal bias (−0.11 mm) between 3D images and printed LA models (Figure A). As plotted in Figure B, LAAO sizing by implantation simulation with 3D printing model showed excellent agreement with actually implanted LAAO size (r=0.927; bias=0.7±2.5), while LAAO sizing by 2D TEE measurements remained poor (r=0.544; bias 2.3±6.7).

Conclusions

LAAO size determination by using 3D printing model of LAA showed excellent accuracy. A prospective study to evaluate the clinical utility of this method should be done in future.

Search for a Dark Matter-Induced Annual Modulation Signal in NaI(Tl) with the COSINE-100 Experiment

We present new constraints on the dark matter-induced annual modulation signal using 1.7 years of COSINE-100 data with a total exposure of 97.7 kg yr. The COSINE-100 experiment, consisting of 106 kg of NaI(Tl) target material, is designed to carry out a model-independent test of DAMA/LIBRA's claim of WIMP discovery by searching for the same annual modulation signal using the same NaI(Tl) target. The crystal data show a 2.7  cpd/kg/keV background rate on average in the 2-6 keV energy region of interest. Using a χ-squared minimization method we observe best fit values for modulation amplitude and phase of 0.0092±0.0067  cpd/kg/keV and 127.2±45.9  d, respectively.

Raman-Based in Situ Monitoring of Changes in Molecular Signatures during Mitochondrially Mediated Apoptosis

Obtaining molecular information from inside cells is an important topic to understand the outcome of molecular interactions between potential drug molecules and biomolecules inside cells. To envision this goal, we investigated the surface-enhanced Raman scattering-based single-cell spectroscopic method to monitor changes in intracellular molecular signatures during mitochondrially mediated apoptosis in real time. Triphenylphosphine-modified gold nanoparticles were localized successfully to the mitochondria and greatly enhanced to obtain the intrinsic Raman scattering spectrum of mitochondria and cytochrome c in the live cell. Photothermally induced apoptosis showed a moderate decrease in the disulfide bond and a sharp increase in β-sheet structures depending on the input-laser power, along with morphological changes. However, chemical drug induced-apoptosis showed more subtle changes in the disulfide bond, as well as changes in Raman peaks corresponding to cytochrome c, and the appearance of a new peak at 1420 cm-1, which enabled us to study the molecular interactions within the mitochondria in real time from a single cell, following treatment with a novel pyruvate dehydrogenase kinase inhibitor.

First Direct Search for Inelastic Boosted Dark Matter with COSINE-100

A search for inelastic boosted dark matter (IBDM) using the COSINE-100 detector with 59.5 days of data is presented. This relativistic dark matter is theorized to interact with the target material through inelastic scattering with electrons, creating a heavier state that subsequently produces standard model particles, such as an electron-positron pair. In this study, we search for this electron-positron pair in coincidence with the initially scattered electron as a signature for an IBDM interaction. No excess over the predicted background event rate is observed. Therefore, we present limits on IBDM interactions under various hypotheses, one of which allows us to explore an area of the dark photon parameter space that has not yet been covered by other experiments. This is the first experimental search for IBDM using a terrestrial detector.

Dielectric function, critical points, and Rydberg exciton series of WSe2 monolayer

The complex dielectric function ([Formula: see text]) of WSe₂ monolayer grown by atomic layer deposition is investigated using spectroscopic ellipsometry. Band structure parameters are obtained by standard line-shape analysis of the second-energy-derivative of [Formula: see text] spectra. The fundamental band gap is observed at 2.26 eV, corresponds to transition between valence band (VB) maximum at the K point and conduction band (CB) minimum at Q point in the Brillouin zone (BZ). Two strong so-called A and B excitonic peaks in [Formula: see text] spectra originate from vertical transitions from spin-orbit split (0.43 eV) VB to CB at K point of the BZ. Binding energies of A and B exactions are 0.71 and 0.28 eV, respectively. Well resolved five excited excitons states has been detected within the spectral region between A and B. Energy profile of the Rydberg series shows significant deviation from the hydrogenic behavior, discussed in connection with the 2D hydrogen model. Results presented here will improve our understanding about the optical response of 2D materials and will help to design better optoelectronic applications and validate theoretical considerations.

Patients and Their Caregivers' Burdens for Parkinson's Disease in Korea

Objective

Many patients with Parkinson’s disease (PD) suffer from motor and non-motor symptoms. According to these variable symptoms of PD, patients or caregivers have a poorer quality of life than patients with other neurodegenerative diseases. Since the difficulties are varied for all patients, prioritizing their difficulties differs among all cases. The goal of this study was to investigate the burdens of PD among the caregivers as well as patients and to identify areas requiring aid from the government.

Methods

We surveyed the awareness and perceptions of PD in patients and caregivers of PD by a face-to-face questionnaire. The questionnaire was divided into three sections: symptoms of PD (part A), desire for policies (part B), and difficulties faced by their caregivers (part C). Part A comprised 8 questions, Part B had 2 questions, and Part C had 3 questions.

Results

In total, 853 subjects (702 patients and 151 caregivers) were enrolled in this study. The major difficulties experienced by PD patients were physical (67%), psychiatric (60%) and socio-economic (52%). Assessing the physical difficulties, more than half the patients experienced severe difficulties (29% very severe, 39% severe). Psychiatric difficulties were assessed as severe (35%) and very severe (21%) among the patients. Severe difficulties were also experienced socio-economically, at 52% in patients and 49% in caregivers, especially among patients in their fifties (58%) and those with their spouse (65%) as caregivers. The topmost need was the introduction of new technology for treatment of PD (62%), followed by relief of costs for treatment (38%) and a family support system (31%). The majority (91%) of the patients were diagnosed with PD within two years after onset of symptoms.

Conclusion

We know that the difficulties of PD and the needs for government assistance are different between patients and caregivers. These results emphasize that perceiving the difficulties and needs of patients and caregivers early can help to prevent and ameliorate the burden of disease.

Catheter probe endoscopic ultrasonography by using cold lubricating jelly-filled method for esophageal subepithelial tumors

Catheter probe endoscopic ultrasonography (C-EUS) by ultrasonographic jelly-filled method has been used to evaluate esophageal subepithelial tumors (SETs). Ultrasonographic jelly is safe on the skin, but its internal safety has not been demonstrated. The jelly stored at room temperature is easily injected into the esophagus through the instrument channel of the endoscope. However, using jelly stored at room temperature remains problematic because the jelly is drained rapidly. We used cold lubricating jelly and an intravenous extension tube to resolve these problems. In this study, we evaluated the safety and efficacy of cold lubricating jelly-filled method. The medical records of patients who underwent C-EUS by using water or cold lubricating jelly-filled method for esophageal SETs from March 2013 to September 2016 in Gangneung Asan hospital were reviewed. Clinical characteristics and EUS findings were evaluated retrospectively. Image quality and procedure time between water and cold lubricating jelly-filled method were compared retrospectively. This study included 138 patients (74 males, 64 females) with esophageal SET with a mean age of 57.1 ± 11.1 years. Thirty-four patients had lesions in the upper esophagus, 58 patients had lesions in the middle esophagus, and 46 patients had lesions in the lower esophagus. The EUS diagnoses were leiomyoma (82.6%), hemangioma (4.3%), extrinsic compressive lesion (3.6%), granulosa cell tumor (2.9%), ectopic calcification (1.4%), cyst (1.4%), lipoma (0.7%), varix (0.7%), and inconclusive lesion (2.2%). The mean image score in the cold lubricating jelly filled-method group was higher than that in the water-filled method group (3.2 ± 0.7 vs. 2.8 ± 0.7, P = 0.002). The procedure time in the cold lubricating jelly filled-method group was shorter than that in the water-filled method group (10 minutes 27 seconds ± 4 minutes 22 seconds versus 13 minutes 20 seconds ± 6 minutes 20 seconds, P = 0.045). No procedure-related complication was observed. C-EUS using the cold lubricating jelly-filled method seems to provide better image quality and shorter procedure time compared with C-EUS using the water-filled method.

Development of a simple computerized torsion test to quantify subjective ocular torsion

PurposeThe double Maddox-rod test (DMRT) and Lancaster red-green test (LRGT) are the most widely used tests worldwide to assess subjective ocular torsion. However, these tests require equipment and the quantified results of ocular torsion are only provided in rough values. Here we developed a novel computerized torsion test (CTT) for individual assessment of subjective ocular torsion and validated the reliability and accuracy of the test compared with those of the DMRT and LRGT.MethodsA total of 30 patients with cyclovertical strabismus and 30 controls were recruited. The CTT was designed using Microsoft Office PowerPoint. Subjects wore red-green filter spectacles and viewed gradually tilted red and cyan lines on an LCD monitor and pressed the keyboard to go through the slides, until both lines seemed parallel. All subjects underwent the CTT, DMRT, and LRGT. Intraclass correlation coefficients and Bland-Altman plots were analyzed to assess the acceptability of the CTT compared with that of the DMRT.ResultsBoth the DMRT and CTT showed no significant test-retest differences in the strabismus and control groups. The DMRT and CTT results demonstrated an acceptable agreement. The reliability of the CTT was better than that of the DMRT. The LRGT showed low sensitivity for the detection of ocular torsion compared with the DMRT (40.0%) and CTT (39.1%).ConclusionOur results suggest that the assessment of subjective ocular torsion using the CTT based on PowerPoint software is simple, reproducible, and accurate and can be applied in clinical practice.

Sterile Neutrino Search at the NEOS Experiment

An experiment to search for light sterile neutrinos is conducted at a reactor with a thermal power of 2.8 GW located at the Hanbit nuclear power complex. The search is done with a detector consisting of a ton of Gd-loaded liquid scintillator in a tendon gallery approximately 24 m from the reactor core. The measured antineutrino event rate is 1976 per day with a signal to background ratio of about 22. The shape of the antineutrino energy spectrum obtained from the eight-month data-taking period is compared with a hypothesis of oscillations due to active-sterile antineutrino mixing. No strong evidence of 3+1 neutrino oscillation is found. An excess around the 5 MeV prompt energy range is observed as seen in existing longer-baseline experiments. The mixing parameter sin^{2}2θ_{14} is limited up to less than 0.1 for Δm_{41}^{2} ranging from 0.2 to 2.3 eV^{2} with a 90% confidence level.