Spatially selective catalysis of OSA starch for preparation of Pickering emulsions with high emulsification properties

The traditional strategies of chemical catalysis and biocatalysis for producing octenyl succinic anhydride modified starch can only randomly graft hydrophobic groups on the surface of starch, resulting in unsatisfactory emulsification performance. In this work, a lipase-inorganic hybrid catalytic system with multi-scale flower like structure is designed and applied to spatially selective catalytic preparation of ocenyl succinic anhydride modified starch. With the appropriate floral morphology and petal density, lipases distributed in the "flower center" can selectively catalyze the grafting of hydrophobic groups in a spatial manner, the hydrophobic groups are concentrated on one side of starch particles. The obtaining OSA starch exhibits excellent emulsifying property, and the pickering emulsion has good protective effect on the embedded curcumin. This work provides a direction for the development of high-performance starch-based emulsifiers for the food and pharmaceutical industries, which is of great significance for improving the preparation and emulsification theory research of modified starch.

Effects of polysaccharides on colonic targeting and colonic fermentation of ovalbumin-ferulic acid based emulsion

Rutin is a polyphenol with beneficial pharmacological properties. However, its bioavailability is often compromised due to low solubility and poor stability. Encapsulation technologies, such as emulsion systems, have been proven to be promising delivery vehicles for enhancing the bioavailability of bioactive compounds. Thus, this study was proposed and designed to investigate the colonic targeting and colonic fermentation characteristics of rutin-loaded ovalbumin-ferulic acid-polysaccharide (OVA-FA-PS) complex emulsions. The results indicate that OVA-FA-PS emulsion effectively inhibits the degradation of rutin active substances and facilitates its transport of rutin to the colon. The analysis revealed that the OVA-FA-κ-carrageenan emulsion loaded with rutin exhibited superior elasticity and colon targeting properties compared to the OVA-FA-hyaluronic acid or OVA-FA-sodium alginate emulsions loaded with rutin in the composite emulsion. Additionally, it was observed that the rutin loaded within the OVA-FA-κ-carrageenan emulsion underwent degradation and was converted to 4-hydroxybenzoic acid during colonic fermentation.

Hot-water soluble fraction of starch as particle-stabilizers of oil-in-water emulsions: Effect of dry heat modification

Dry heat treatment (DHT) ranging from 130 to 190 °C was employed to modify corn starch. The hot-water soluble fraction (HWS) of the DHT-modified starch was isolated, and its capacity and mechanism for stabilizing O/W emulsions were investigated. Corn starch underwent a significant structural transformation by DHT at 190 °C, characterized by a 7.3 % reduction in relative crystallinity, a tenfold decrease in weight-average molecular weight from 95.21 to 8.11 × 106 g/mol, and a degradation of over one-third of the extra-long chains of amylopectin (DP > 36) into short chains (DP 6-12). These structural modifications resulted in a substantial formation of soluble amylopectin, leading to a sharp increase in the HWS content of corn starch from 3.16 % to 85.06 %. This augmented HWS content surpassed the critical macromolecule concentration, prompting the formation of HWS nanoaggregates. These nanoaggregates, with an average particle size of 33 nm, functioned as particle stabilizers, ensuring the stability of the O/W emulsion through the Pickering mechanism. The O/W emulsion stabilized by HWS nanoaggregates exhibited noteworthy centrifugal and storage stability, with rheological properties remaining nearly unchanged over a storage period of 180 days. Given its straightforward preparation process, the HWS of DHT-modified starch could be a promising natural emulsifier.

Different interfaces for stabilizing liquid-liquid, liquid-gel and gel-gel emulsions: Design, comparison, and challenges

Interfaces play essential roles in the stability and functions of emulsion systems. The quick development of novel emulsion systems (e.g., water-water emulsions, water-oleogel emulsions, hydrogel-oleogel emulsions) has brought great progress in interfacial engineering. These new interfaces, which are different from the traditional water-oil interfaces, and are also different from each other, have widened the applications of food emulsions, and also brought in challenges to stabilize the emulsions. We presented a comprehensive summary of various structured interfaces (stabilized by mixed-layers, multilayers, particles, nanodroplets, microgels etc.), and their characteristics, and designing strategies. We also discussed the applicability of these interfaces in stabilizing liquid-liquid (water-oil, water-water, oil-oil, alcohol-oil, etc.), liquid-gel, and gel-gel emulsion systems. Challenges and future research aspects were also proposed regarding interfacial engineering for different emulsions. Emulsions are interface-dominated materials, and the interfaces have dynamic natures, as the compositions and structures are not constant. Biopolymers, particles, nanodroplets, and microgels differed in their capacity to get absorbed onto the interface, to adjust their structures at the interface, to lower interfacial tension, and to stabilize different emulsions. The interactions between the interface and the bulk phases not only affected the properties of the interface, but also the two phases, leading to different functions of the emulsions. These structured interfaces have been used individually or cooperatively to achieve effective stabilization or better applications of different emulsion systems. However, dynamic changes of the interface during digestion are only poorly understood, and it is still challenging to fully characterize the interfaces.

Regulation of fat crystals in water-in-oil emulsions by high-intensity ultrasound: Crystal size and tracing of droplet distribution

In this paper, two emulsion systems with high and low solid fat contents were prepared from 20 % water phase and 80 % oil phase by adjusting the palm oil/palm stearin/soybean oil ratio. Different ultrasonic power and time were used for the pretreatment of emulsion with different solid fat content, and the application characteristics of ultrasonic in W/O emulsions were explored and evaluated. Directly using high-intensity ultrasound to prepare fatty emulsions would weaken the hardness and storage modulus G' of the samples. Although ultrasound reduced the size of fat crystals in emulsions, the interaction between water droplets and fat crystals needs to be considered. After ultrasonic treatment, water droplets were difficult to immobilize on the crystal surface and thus acted as an active filler to stabilize the emulsion together with the fat crystal network. In high solid fat emulsion systems, an increase in ultrasound power (from 100 W to 200 W) could more affect the crystallization behavior of fats than an increase in ultrasound duration (from 30 s to 60 s), and the distribution of crystals and droplets was more uniform. In the low solid fat emulsion system, the texture of the sample after ultrasonic treatment was softer, and the surface was more delicate and smoother. However, the higher ultrasonic intensity (200 W) was not conducive to the preparation of the spread. Although the ultrasound with excessive intensity promoted the formation of small crystals, it would also lead to the aggregation of small crystals. These small crystals cannot form a uniform crystal network, which increases the fluidity of emulsions.

Effects of molecular structure and charge state on the foaming and emulsifying properties of Spirulina protein isolates

Microalgae protein holds great potential for various applications in the food industry. However, the current knowledge regarding microalgae protein remains limited, with little information available on its functional properties. Furthermore, the relationship between its molecular structure and functional properties is not well defined, which limits its application in food processing. This study aims to addresses these gaps though an analysis of the emulsibility and foamability of various soluble protein isolates from two species of Spirulina (Arthospira platensis and Spirulina platensis), and the functional properties of Spirulina protein isolates in relation to its molecular structure and charge state. Results revealed that the degree of cross-linking and aggregation or folding and curling of protein tertiary structures was higher in the highly soluble Spirulina protein isolates (AP50% and SP50%) than in the low-solubility isolates (AP30% and SP30%). The foaming capacity (FC) of AP50% and SP50% was found to be lower than that of AP30% and SP30%. Spirulina protein isolates can stably adsorb at the air-water interface for at least 20 min and possessed good interfacial activity. A high pH value was found to promote cross-linking of protein particles at the oil-water interface, thereby reinforcing the internal network structure of emulsions and increasing viscosity. These findings provide preliminary insights for potential applications of Spirulina protein isolates in food production, especially towards quality improvement.

Non-covalent interactions between rice protein and three polyphenols and potential application in emulsions

Rice protein (RP) and polyphenols are often used in functional foods. This study investigated the non-covalent interactions between RP and three polyphenols (curcumin, CUR; quercetin, QUE; resveratrol, RES) and used the complexes as emulsifiers to create emulsions. Three polyphenols interacted with RP to varying extents, with QUE showing the greatest binding affinity and inducing the greatest alterations in its secondary structure. Molecular docking analysis elucidated the driving forces between them including hydrophobic interactions, hydrogen bonding, and van der Waals forces. Combination with QUE or RES induced structural changes of RP, increasing particle size of complexes. The synergistic effect of polyphenols and protein also enhanced radical scavenging capacity of complexes. Compared to pure protein, all complexes successfully created emulsions with smaller particle size (378-395 nm vs. 470 nm), higher absolute potential (37.43-38.26 mV vs. 35.62 mV), and greater lipid oxidation stability by altering protein conformation.

High-pressure microfluidization enhanced the stability of sodium caseinate-EGCG complex-stabilized fish oil emulsion

Improving the emulsion-stabilizing effect of protein by chemical or physical modification has been paid much attention recently. Here, sodium caseinate (CS) was treated by high-pressure-microfluidization (HPM) under 0-100 MPa, and was further complexed with (-)-epigallocatechin-3-gallate (EGCG) to form an excellent emulsifier that stabilized fish oil emulsions. Results showed that HPM treatment (especially 80 MPa) significantly changed the secondary structure of CS, and 80 MPa-PCS-EGCG had the best emulsifying and antioxidant activities. In addition, after HPM treatment and EGCG bonding, CS formed a thicker interface layer on the surface of oil droplets, which could better protect the fish oil from the influence by oxygen, temperature and ion concentration. Moreover, the fish oil emulsion stabilized by PCS-EGCG complex significantly delayed the release of free fatty acids subjected to in vitro digestion. Conclusively, HPM-treated CS-EGCG complex could be a potential emulsifier to improve the stability of fish oil emulsions.

Formation mechanism of quinoa protein hydrolysate-EGCG complexes at different pH conditions and its effect on the protein hydrolysate-lipid co-oxidation in emulsions

This study aimed to investigate the interaction, structure, antioxidant, and emulsification properties of quinoa protein hydrolysate (QPH) complexes formed with (-)-epigallocatechin gallate (EGCG) at pH 3.0 and 7.0. Additionally, the effect of pH conditions and EGCG complexation on protein hydrolysate-lipid co-oxidation in QPH emulsions was explored. The results indicated that QPH primarily interacted with EGCG through hydrophobic interactions and hydrogen bonds. This interaction led to alterations in the secondary structure of QPH, as well as a decrease in surface hydrophobicity and free SH content. Notably, the binding affinity between QPH and EGCG was observed to be higher at pH 7.0 compared to pH 3.0. Consequently, QPH-EGCG complexes exhibited more significant enhancement in antioxidant and emulsification properties at pH 7.0 than pH 3.0. The pH level also influenced the droplet size, ζ-potential, and interfacial composition of emulsions formed by QPH and QPH-EGCG complexes. Compared to QPH stabilized emulsions, QPH-EGCG stabilized emulsions were more capable of mitigating destabilization during storage and displayed fewer lipid oxidation products, carbonyl generation, and sulfhydryl groups and fluorescence loss, which implied better oxidative stability of the emulsions. Furthermore, the QPH-EGCG complexes formed at pH 7.0 exhibited better inhibition of protein hydrolysate-lipid co-oxidation. Overall, these findings provide valuable insights into the potential application of QPH and its complexes with EGCG in food processing systems.

Interactions between partially gelatinized starch and nonstarch components in potato flour and their performance in emulsification

To develop natural complex materials as starch-dominated emulsifiers, pregelatinization was conducted on potato flour. The effects of gelatinization degrees (GDs, 0 %-50 %) on the structural characteristics, physicochemical properties, and emulsifying potentials of potato flour were investigated. Increasing GD of potato flour promoted protein aggregation on starch granules surfaces and transformed starch semicrystalline structures into melted networks. The emulsion stabilized with 50 % GD potato flour exhibited excellent storage stability (7 d) and gel-like behavior. With increasing GD from 0 to 50 %, the respective apparent viscosities and elastic moduli of emulsion increased from 21.4 Pa to 1126.7 Pa, and from 0.133 Pa·s to 1176.6 Pa·s, promoting the formation of a stable network structure in the emulsion. Fourier transform infrared spectra from emulsions with a continuous phase of >20 % GD displayed a new peak around 1740 cm-1, suggesting improved covalent interactions between droplets, thereby facilitating emulsion stability. Confocal laser scanning microscopy images indicated that droplets could be anchored in the melted networks and broken starch granules, inhibiting droplets coalescence. These results suggest that pregelatinization is a viable strategy for customizing natural starch-dominated emulsions.

Banana peel nanocellulose and soy protein hydrolysate complexed colloidal nanoparticles synthesis using ultrasonic interventions: characterization and stable pickering emulsion formation

Pickering based emulsion system are been gaining interest in active delivery of encapsulated molecules in food system. In the present study, cellulose nanoparticles (CNPs) were isolated from food waste (banana peel) using acid hydrolysis followed by high-intensity ultrasonication. The complex colloidal nanoparticles (CNPSPH) were fabricated using hydrogen bonding and electrostatic interactions between cellulose nanoparticles and soy protein hydrolysates. With 400 W power level for 30 min, size of 53.11 ± 1.45 nm with polydispersity index of 0.21 ± 0.21 and Zeta potential of - 34.33 ± 0.77 were noted for generated CNPs. The three-phase contact angle (o/w) of CNPSPH at a mass ratio of 1:1 CNPs to SPHs (CNPSPH 1:1) was approximately 89.07°, indicating as effective Pickering emulsifiers. Furthermore, the stability of the Pickering emulsion stabilised by CNPSPH complex was investigated under various pH and temperature conditions. The findings will provide solution in development of nanocellulose-soy protein complex particles for a stabilized Pickering emulsion formation.

Supplementary Information

The online version contains supplementary material available at 10.1007/s10068-023-01477-w.

Effects of catechin on the stability of myofibrillar protein-soybean oil emulsion and the adsorbed properties of myosin at the oil-water interface

The effects of different concentrations of catechin on the stability of myofibrillar protein-soybean oil emulsions and the related mechanisms were investigated. Adding 10 μmol/g catechin had no obvious effects on the emulsion stability and myosin structure, but 50, 100 and 200 μmol/g catechin decreased the emulsion stability. The microstructure observations showed that 10 μmol/g catechin caused a dense and uniform emulsion to form, whereas 50, 100 and 200 μmol/g catechin induced the merging of oil droplets. The addition of 50, 100 and 200 μmol/g catechin caused a decline in both the total sulfhydryl content and surface hydrophobicity, suggesting protein aggregation, which decreased the adsorption capacity of myosin and the elasticity of interfacial film. These results suggested that higher concentrations of catechin were detrimental to the emulsifying properties of myosin and that the dose should be considered when it is used as an antioxidant.

Water-in-oil Pickering emulsion using ergosterol as an emulsifier solely

As a crucial component of the fungal cell membranes, ergosterol has been demonstrated to possess surface activity attributed to its hydrophobic region and polar group. However, further investigation is required to explore its emulsification behavior upon migration to the oil-water interface. Therefore, this study was conducted to analyze the interface properties of ergosterol as a stabilizer for water in oil (W/O) emulsion. Moreover, the emulsion prepared under the optimal conditions was utilized to load the water-soluble bioactive substance with the chlorogenic acid as the model molecules. Our results showed that the contact angle of ergosterol was 117.017°, and its dynamic interfacial tension was obviously lower than that of a pure water-oil system. When the ratio of water to oil was 4: 6, and the content of ergosterol was 3.5 % (ergosterol/oil phase, w/w), the W/O emulsion had smaller particle size (438 nm), higher apparent viscosity, and better stability. Meanwhile, the stability of loaded chlorogenic acid was improved under unfavorable conditions (pH 1.2, 90 °C, ultraviolet irradiation, and oxidation), which were 73.87 %, 59.53 %, 62.53 %, and 69.73 %, respectively. Additionally, the bioaccessibility of chlorogenic acid (38.75 %) and ergosterol (33.69 %), and the scavenging rates of the emulsion on DPPH radicals (81.00 %) and hydroxyl radicals (82.30 %) were also enhanced. Therefore, a novel W/O Pickering emulsion was prepared in this work using ergosterol as an emulsifier solely, which has great potential for application in oil-based food and nutraceutical formulations.

Effect of modified cellulose-based emulsion on gel properties and protein conformation of Nemipterus virgatus surimi

Microcrystalline cellulose was modified by TEMPO oxidation combined with ultrasound to prepare modified cellulose-based emulsion. The effect of different emulsion concentration on gel properties and protein conformation of surimi was investigated. The results showed the length and width of microcrystalline cellulose were reduced, and a large amount of -COOH was introduced into modified cellulose. Direct addition of flaxseed oil decreased the gel strength and WHC from 3640.49 g·mm and 76.94% to 2702.95 g·mm and 75.89%, respectively, while 5% modified cellulose-based emulsion could improve the gel properties of surimi. Surimi gel containing 5% emulsion had the highest hydrophobic interaction, disulfide bond and β-sheet content. Moreover, protein network structure was the densest in 5% emulsion group. Therefore, modified cellulose-based emulsion could be used to compensating for the negative impact of direct addition of flaxseed oil on surimi, which provided a new idea for the development of healthy and new emulsified surimi products.

Sustainable application of surfactants in soil remediation: Selective pollutants adsorption and hydrogen peroxide-driven adsorbent regeneration

The uncontrolled disposal of the liquid lindane wastes have led to the formation of dense non-aqueous phase liquids (DNAPL), consisting of 28 chlorinated organic compounds (COCs), contaminating soil and groundwater. Surfactant-enhanced aquifer remediation is proposed as technology to treat these sites. However, the polluted emulsion generated must be manged on-site. In this work a two-step process is applied to treat emulsion composed of E-Mulse® 3 (4 g·L-1) as surfactant and a DNAPL (2 gCOCs·L-1). In the first, the COCs were selectively adsorbed in a granular activated carbon (GAC) column with Fe (II) previously adsorbed (10-20mg·g-1) onto the carbon surface, recovering an aqueous phase with surfactant for their reuse. In the second step, the spent GAC was regenerated with a 40 g·L-1 solution of hydrogen peroxide fed to the column at 2 mL·min-1 to promote the oxidation of the COCs adsorbed in the GAC. The kinetic and adsorption model in a multisolute (surfactant and DNAPL) system has been proposed. Five successive cycles of regeneration/adsorption have been successfully applied in the column process. About 50 % of the COCs were retained from the emulsion, and more than 70 % of the surfactant was recovered. The consumption of unproductive oxidants decreased with the number of regeneration cycles. The water effluent obtained after regeneration of GAC did not present chlorinated compounds desorbed and nontoxic by-products generated, such as short-chain acids.

Milk fat globule membrane regulates the physicochemical properties and surface composition of infant formula powders by improving the stability of the emulsion

The milk fat globules in infant formula (IF) are encapsulated by a component known as milk fat globule membrane (MFGM). However, it is currently unclear whether the improved emulsion stability of MFGM can have a profound effect on the finished IF. Therefore, this study investigated the effects of MFGM on the particle size, stability, rheology, and microstructure of emulsions prepared by dairy ingredients via wet mixing. Further, IF were processed using such emulsions, the physicochemical properties, surface composition of the powders were examined. The results showed that MFGM reduced the particle size of the emulsion, increased the viscosity, and improved the microstructure of the MFGM. Furthermore, MFGM reduced the moisture content of the powder, increased the glass transition temperature, and reduced the presence of surface fat. In conclusion, the addition of MFGM enhance the finished powder stability by improving the emulsion stability prepared during IF manufacturing.

Design, characterization and digestibility of β-carotene-loaded emulsion system stabilized by whey protein with chitosan and potato starch addition

The physicochemical properties and gastrointestinal fate of β-carotene-loaded emulsions and emulsion gels were examined. The emulsion was emulsified by whey protein isolate and incorporated with chitosan, then the emulsion gels were produced by gelatinizing potato starch in the aqueous phase. The rheology properties, water distribution, and microstructure of emulsions and emulsion gels were modulated by chitosan combination. A standardized INFOGEST method was employed to track the gastrointestinal fate of emulsion systems. Significant changes in droplet size, zeta-potential, and aggregation state were detected during in vitro digestion, including simulated oral, stomach, and small intestine phases. The presence of chitosan led to a significantly reduced free fatty acids release in emulsion, whereas a slightly increasing released amount in the emulsion gel. β-carotene bioaccessibility was significantly improved by hydrogel formation and chitosan addition. These results could be used to formulate advanced emulsion systems to improve the gastrointestinal fate of hydrophobic nutraceuticals.

Stability and gastrointestinal behavior of curcumin-loaded emulsion stabilized by multi-conformation soy proteins: Influence of oil volume fraction

The aim of this work was to assess the potential of nanoemulsions stabilized by mixed soy protein with multi-conformation as curcumin carrier, and the influence of oil volume fraction on stability and gastrointestinal behavior of curcumin-loaded emulsion was investigated. Loading efficiency showed a slight increase with higher oil content, though the difference was not statistically significant. With the increase of oil, the viscosity (Pa‧s), thixotropy (area of hysteresis loop) and particle size of the emulsion increased, which facilitated the physical and chemical stability of curcumin-loaded emulsion. However, the free fatty acid release rate and bioaccessibility of curcumin was negatively correlated with the oil volume fraction and the particle size of emulsion after gastric digestion. Notably, the digestion in stomach did not affect the structure of interfacial protein, demonstrating that protein-based nanoemulsions exhibited resistance to gastric digestion. This study provides theoretical guidance for the application of protein-based emulsion in curcumin delivery.

Physical and oxidative stability of flaxseed oil-in-water emulsions prepared by natural lignin-carbohydrate complex

Flaxseed oil, rich in α-linolenic acid, plays a crucial role in various physiological processes. However, its stability presents certain challenges. In this study, the natural lignin-carbohydrate complex (LCC) was used to prepare the physical and oxidative stability of flaxseed oil-in-water emulsions. The LCC was characterized by HPLC, GPC, and FT-IR. The stability of emulsions was evaluated by viscosity, modulus, and micro-morphology changes. Then, the oxidation products were monitored by UV-vis spectrophotometer and HPLC. The results revealed that the high internal phase emulsion (HIPE) was successfully prepared with 2.5 wt% LCC at an oil/water ratio of 75/25 (v/v). Small droplet size (13.361 μm) and high viscosity (36,500 mPa·s) were found even after 30-day storage. Steric interactions of the LCC play a crucial role in ensuring stability, intricately linked to the interfacial properties of the emulsion. Meanwhile, the oxidative stability of α-linolenic acid in the encapsulated flaxseed oil was significantly higher than that in the bulk flaxseed oil. The results revealed that the LCC as a suitable emulsifier opens a new window for the storage of functional lipids rich in polyunsaturated fatty acids.

Fabrication, structure, characterization and emulsion application of citrate agar

In this study, citric acid successfully reacted with agar through the dry heat method, and citrate agar (CA) gel was used to stabilize O/W emulsions. The mechanisms of the CA structure and emulsion pH that affected emulsion stabilization were analyzed, and the application of CA gel emulsion (CAGE) was explored. Compared with native agar (NA), CA showed lower gel strength, higher transparency, and higher water contact angle. These changes indicate that a cross-linking reaction occurred, and it was demonstrated via FTIR and NMR. The emulsion properties were evaluated using particle size, ζ-potential, and the emulsification activity index. Results showed that CAGEs had a smaller particle size and lower ζ-potential than the native agar gel emulsion (NAGE). Meanwhile, confocal laser scanning microscopy confirmed that the CA gels stabilized the emulsions by forming a protective film around the oil droplets. Stability experiments revealed that CAGE (prepared with CA gel [DS = 0.145]) exhibited better stability than NAGE in the pH range of 3-11, and the rheological results further confirmed that the stability of the emulsions was influenced by the network structure and oil droplet interaction forces. Afterward, the application prospect of CAGE was evaluated by encapsulating vitamin D3 and curcumin.

Effects of high-pressure homogenization and ultrasound on the composition, structure, and physicochemical properties of proteins extracted from Nannochloropsis Oceania

This study examined the effects of high-pressure homogenization (HPH) and ultrasonication pre-treatment on the structural and physicochemical properties of proteins extracted from defatted Nannochloropsis Oceania biomass (DNOB). HPH treatment was found to enhance the solubility of protein extracted from DNOB compared to ultrasound, where samples pretreated with three passes (3P) of HPH exhibited lower solubility than two passes (2P). The morphology of extracted samples was visualized by scanning electron microscopy, which HPH pre-treatment, especially with more passes, were able to breakdown DNOB into fragments. Alternatively, more holes were displayed on the surface of the extracts pretreated with ultrasound especially when higher amplitude applied. The particle size of extracts from HPH3P (129.5 µm) significant dropped from HPH2P (314.25 µm), where samples pretreated with ultrasound at 20 % amplitude (US20) also decreased in particle size compared to 40 % amplitude (US40), from 115.25 µm to 78.22 µm. Protein flexibility of DNOB extracts were enhanced by both HPH2P and HPH3P but decreased for ultrasound samples. β-sheets were found to be the most abundant protein secondary structure for all samples, where samples treated with HPH3P contained the highest percentage of β-sheets (72 %) than control, HPH2P, ultrasonication at 20 and 40 % amplitude (52-62 %). The high percentage of β-sheets found in HPH3P sample also contributed to its outstanding emulsifying properties which stood out among all, especially at concentrations over 1 mg/ml. Results obtained from this study helped to direct the application of DNOB extracts as functional food ingredient for future food innovation.

Ultraviolet spectrophotometry as method to determine the concentration of β-myrcene released from chitosan in aqueous medium

Myrcene (β-myrcene), found in essential oils from plant species such as hops and cannabis, has many advantageous properties, but its use is limited due to volatility and low solubility in water. One way to circumvent these limitations is to encapsulate the essential oils in a polymer matrix. However, these hydrophobic molecules are difficult to quantify when dispersed in water. Seeking to study the release of this terpene in drug release tests from polymeric matrices, this work aimed to develop an easy and cheap UV spectrophotometric method for the quantification of β-myrcene in aqueous medium. To achieves this goal, samples were prepared in 0.05% (w/v) polysorbate 80 solution, with concentrations of β-myrcene ranging from 0.01% to 0.1% (v/v), and were analyzed at 226 nm. Each sample was analyzed in triplicate and repeated on three different days, to evaluate the repeatability of the results. The results were subjected to Q, F and Student's t-tests. The regression parameters obtained for β-myrcene were above 0.99 and through statistical analysis, it was possible to confirm the repeatability for the results. The values of the limits of detection and quantification indicated that the method is not affected by intrinsic factors of the equipment. The results of accuracy, robustness and selectivity showed recovery rates within acceptable limits. This demonstrates that the quantification of β-myrcene in aqueous medium by UV spectrophotometry is feasible.

External factors affecting the linear and nonlinear rheological behavior of oleogel-based emulsions

This study reported oleogel-based emulsions (OGEs, W/O) stabilized by carnauba wax. The effects of different external factors (heating temperature, crystallization temperature, and shear application during crystallization) on the microstructure and linear/nonlinear rheological properties of OGEs were investigated. Microstructural observation suggested that the OGEs had a uniform droplet distribution, and the carnauba wax crystals trapped oil in the continuous phase. The gelatinized oil phase allowed the OGEs to have a solid appearance and typical yielding behavior. The small amplitude oscillation shear analysis showed that lower heating temperature, higher crystallization temperature, and suitable shear application resulted in a stronger, more stable, and tighter packed network structure and better resistance to deformation of the OGEs. For nonlinear behavior, the elastic dominant behavior of OGEs transformed into viscous dominant behavior at large strain amplitudes, accompanied by more energy dissipation, strain stiffening, and a transition from shear thickening to shear thinning.

Bile conjugation and its effect on in vitro lipolysis of emulsions

Bile Salts (BS) are responsible for stimulating lipid digestion in our organism. Gut microbiota are responsible for the deconjugation process of primary conjugated to secondary unconjugated BS. We use two structurally distinct BS and characterize the rate of lipolysis as a compound parameter. A static in-vitro digestion model as well as meta-analysis of literature data has been performed to determine the most influential factors affecting the lipid digestion process. The results demonstrate that lipolysis of emulsions using conjugated BS (NaTC, FFA = 60.0 %, CMC in SIF = 5.58 mM, MSR of linoleic acid = 0.21, rate of adsorption = -0.057 mN/m.s) enhances the release of FFA compared to deconjugated BS (NaDC, FFA = 49.5 %, CMC in SIF = 2.49 mM, MSR of linoleic acid = 0.16 rate of adsorption = -0.064 mN/m.s). These results indicate that conjugation plays an important role in controlling the rate of lipolysis in our organism which can be in turn, tuned by the microflora composition of our gut, ultimately controlling the rate of deconjugation of the BS.

Phototoxicity in vitro and safety in vivo of the emulsion photosensitizer based on furanocoumarins of Heracleum sosnowskyi

The use of plants such as giant hogweed as raw materials for the manufacture of dosage forms has been little explored. In this study, we utilized furanocoumarins from the Heracleum sosnowskyi plant to create an experimental emulsion dosage form (EmFHS). The EmFHS was finely dispersed (481.8 nm ± 71.1 nm), shelf-stable, and contained predominantly 8-methoxypsoralen at a concentration of 1 mg/ml. Phototoxicity analysis of EmFHS for THP-1 cells under UV (365 nm) irradiation showed an IC50 of 19.1 µg/ml (24 h) and 6.3 µg/ml (48 h). In relation to spheroids (L929), EmFHS exhibited a phototoxic effect in the concentration range of 31.25-125 µg/ml8-MOP. A full phototoxic effect was observed 48 h after UV irradiation. The phototoxic effect of EmFHS in vitro was dose-dependent and comparable to the effect of emulsion synthetic 8-methoxypsoralen and chlorin e6 solution. EmFHS cytotoxicity was caused solely by UV radiation, and toxicity in the dark was minimal. EmFHS, administered at a dose of 3 mg/kg8-MOP, was found to be safe after a single intravenous administration to rats. It had a photosensitizing effect in the form of local photodermatitis when exposed to UV irradiation at a dose of 44 J/cm2. The biokinetics of emulsion furanocoumarins showed that the phototoxic effect of EmFHS is due to the high penetration ability of the emulsion into cells of spheroids. At the same time, it has a low degree of cumulation when administered intravenously. The obtained data suggest that EmFHS may be a promising treatment for PUVA therapy of various dermatological diseases. Additionally, the plant Heracleum sosnowskyi shows potential as a basis for creating new dosage forms with phototherapeutic effects.