Active Oxygen Functional Group Modification and the Combined Interface Engineering Strategy for Efficient Hydrogen Peroxide Electrosynthesis

Cathodic catalytic activity and interfacial mass transfer are key factors for efficiently generating hydrogen peroxide (H₂O₂) via a two-electron oxygen reduction reaction (ORR). In this work, a carbonized carboxymethyl cellulose (CMC)-reduced graphene oxide (rGO) synthetic fabric cathode was designed and constructed to improve two-electron ORR activity and interfacial mass transfer. Carbonized CMC exhibits abundant active carboxyl groups and excellent two-electron ORR activity with an H₂O₂ selectivity of approximately 87%, higher than that of rGO and other commonly used carbonaceous catalysts. Carbonizing CMC and the agglomerates formed from it restrain the restacking of rGO sheets and thus create abundant meso/macroporous channels for the interfacial mass transfer of oxygen and H₂O₂. Thus, the as-constructed carbonized CMC-rGO synthetic fabric cathode exhibits exceptional H₂O₂ electrosynthesis performance with 11.94 mg·h^-1·cm^-2 yield and 82.32% current efficiency. The sufficient active sites and mass-transfer channels of the cathode also ensure its practical application performance at high current densities, which is further illustrated by the rapid organic pollutant degradation via the H₂O₂-based electro-Fenton process.

Predicting the probability of malignant pathological type of kidney cancer based on mass size: A retrospective study

BACKGROUND

Different degrees of malignancy of renal cell carcinoma (RCC) correspond to dissimilar therapies, and the prediction of malignancy of kidney cancer based on tumor size is still not fully studied.

METHODS

We evaluated a total of 50,776 patients with T1-T2, N0, M0 RCC diagnosed between 2004 to 2015 based on the Surveillance, Epidemiology, and End Results database. Three and four fuhrman grade clear cell RCC, three and four fuhrman grade papillary RCC, collecting duct RCC, sarcomatoid differentiation RCC and unclassified RCC were classified as aggressive RCC. The other RCC was classified as indolent RCC. The probability of aggressive and indolent was estimated according to tumor size using a logistic regression model. Differences in survival between subgroups were assessed using the Kaplan-Meier method.

RESULTS

There were 38,003 cases of indolent tumor and 12,773 cases of aggressive tumor totally. As tumor size increases, the predicted probability of an aggressive tumor also increases. Concretely, kidney cancers of 2cm, 3cm and 4cm were estimated to be 19.6%, 21.6% and 23.7% more likely to be aggressive. And for the same tumor size, clear cell RCC in men is more likely to be invasive relative to women and other kidney cancer pathology types. In addition, both the overall and tumor-specific survival are longer for indolent tumors than for aggressive tumors.

CONCLUSION

We evaluated the degree of malignancy of different sizes RCC in a retrospective study. This result may be helpful in the choice of initial therapy strategies for kidney cancer patients.

A Magnesium/Lithium Hybrid-Ion Battery with Modified All-Phenyl-Complex-Based Electrolyte Displaying Ultralong Cycle Life and Ultrahigh Energy Density

Magnesium/lithium hybrid-ion batteries (MLHBs) combine the advantages of high safety and fast ionic kinetics, which enable them to be promising emerging energy-storage systems. Here, a high-performance MLHB using a modified all-phenyl complex with a lithium bis(trifluoromethanesulfonyl)imide electrolyte and a NiCo₂S₄ cathode on a copper current collector is developed. A reversible conversion involving a copper collector with NiCo₂S₄ efficiently avoids the electrolyte dissociation and diffusion difficulties of Mg²⁺ ions, enabling low polarization and fast redox, which is verified by X-ray absorption near edge structure analysis. Such combination affords the best MLHB among all those ever reported, with a reversible capacity of 204.7 mAh g^-1 after 2600 cycles at 2.0 A g^-1, and delivers an ultrahigh full electrode-basis energy density of 708 Wh kg^-1. The developed MLHB also achieves good rate performance and temperature tolerance at -10 and 50 °C with a low electrolyte consumption. The hybrid-ion battery system presented here could inspire a broad set of engineering potentials for high-safety battery technologies and beyond.

3D Hydrogel Evaporator with Vertical Radiant Vessels Breaking the Trade-Off between Thermal Localization and Salt Resistance for Solar Desalination of High-Salinity

Delivering sufficient water to the evaporation surface/interface is one of the most widely adopted strategies to overcome salt accumulation in solar-driven interfacial desalination. However, water transport and heat conduction loss are positively correlated, resulting in the trade-off between thermal localization and salt resistance. Herein, a 3D hydrogel evaporator with vertical radiant vessels is prepared to surmount the long-standing trade-off, thereby achieving high-rate and stable solar desalination of high-salinity. Experiments and numerical simulations reveal that the unique hierarchical structure, which consists of a large vertical vessel channel, radiant vessels, and porous vessel walls, facilitates strong self-salt-discharge and low longitudinal thermal conductivity. With the structure employed, a groundbreaking comprehensive performance, under one sun illumination, of evaporation rate as high as 3.53 kg m^-2  h^-1 , salinity of 20 wt%, and a continuous 8 h evaporation is achieved, which thought to be the best reported result from a salt-free system. This work showcases the preparation method of a novel hierarchical microstructure, and also provides pivotal insights into the design of next-generation solar evaporators of high-efficiency and salt tolerance.

Catalytic oxidation of polystyrene to aromatic oxygenates over a graphitic carbon nitride catalyst

The continuous increase in manufacturing coupled with the difficulty of recycling of plastic products has generated huge amounts of waste plastics. Most of the existing chemical recycling and upcycling methods suffer from harsh conditions and poor product selectivity. Here we demonstrate a photocatalytic method to oxidize polystyrene to aromatic oxygenates under visible light irradiation using heterogeneous graphitic carbon nitride catalysts. Benzoic acid, acetophenone, and benzaldehyde are the dominant products in the liquid phase when the conversion of polystyrene reaches >90% at 150 °C. For the transformation of 0.5 g polystyrene plastic waste, 0.36 g of the aromatic oxygenates is obtained. The reaction mechanism is also investigated with various characterization methods and procedes via polystyrene activation to form hydroxyl and carbonyl groups over its backbone via C-H bond oxidation which is followed by oxidative bond breakage via C-C activation and further oxidation processes to aromatic oxygenates.

[Long-term outcome follow-up of Oxford unicompartmental knee arthroplasty for medial compartment osteoarthropathy:a single center's experience for 10 years]

Objective: To investigate the long-term outcomes of minimally invasive Oxford phase Ⅲ unicompartmental knee arthroplasty (UKA) for patients with medial compartment osteoarthropathy. Methods: The clinical data of 594 patients (701 knees) who underwent minimally invasive UKA with Oxford phase Ⅲ unicompartmental prosthesis at Department of Orthopedics,the Affiliated Hospital of Qingdao University from January 2007 to January 2016 were retrospectively analyzed.There were 155 males and 439 females,aged (62.6±10.9) years (range: 44 to 81 years),with a body mass index of (26.9±3.8) kg/m² (range: 21.1 to 36.2 kg/m²).There were 359 left knees and 342 right knees,676 knees with osteoarthritis and 25 knees with idiopathic osteonecrosis of the medial femoral condyle.There were 487 cases underwent UKA (66 cases underwent UKA on one side and total knee arthroplasty on the other) and 107 cases underwent bilateral UKA.Patients' prosthetic survival,complications,range of motion(ROM) of the knee,visual analogue score (VAS),Western Ontario and McMaster University (WOMAC) osteoarthritis index,and American knee society score (KSS) were collected to assess clinical outcomes.Paired sample t test was used to compare the data before and after operation. Results: All patients completed the surgery successfully.There was no intraoperative fractures,postoperative infections or symptomatic vascular embolic disease occurred.The postoperative complications,including mobile bearing dislocation,prosthesis loosening,tibial plateau collapse,the lateral compartment degeneration and postoperative pain were occurred in 18 cases (3.0%,18/594).Thirteen patients suffered complications were transferred to total knee arthroplasty,4 underwent partial revision,if this was used as the endpoint of the study,the surgical success rate was 97.1% (577/594) and the prosthetic revision rate was 2.9%.The ROM was improved from(105.9±11.8)°preoperatively to (114.0±13.3)° at the last follow-up (t=10.796,P<0.01);the KSS clinical score was increased from 54.3±3.6 to 90.1±6.0 (P<0.01) and the functional score was increased from 55.9±3.9 to 87.5±5.7(t=124.325,P<0.01;t=110.985,P<0.01).The WOMAC osteoarthritis index was decreased from 54.8±6.7 to 9.2±3.1 at the last follow-up(t=150.860,P<0.01) and the VAS was decreased from 6.1±1.1 to 1.5±1.0 at the last follow-up(t=74.941,P<0.01). Conclusions: Minimally invasive Oxford phase Ⅲ UKA for medial compartment knee osteoarthritis has a favorable prosthesis survival rate,low revision rate,and few complications at long-term follow-up.Patients have significant improvement in knee function with satisfactory clinical outcomes.

[Functional outcomes of 100 patients with adenocarcinoma of the esophagogastric junction undergoing Cheng's GIRAFFE(®) reconstruction after proximal gastrectomy]

Objective: To investigate the functional outcomes and postoperative complications of Cheng's GIRAFFE reconstruction after proximal gastrectomy. Methods: A descriptive case series study was conducted. Clinical data of 100 patients with adenocarcinoma of the esophagogastric junction who underwent Cheng's GIRAFFE reconstruction after proximal gastrectomy in Cancer Hospital of University of Chinese Academy of Sciences (64 cases), Zhejiang Provincial Hospital of Chinese Medicine (24 cases), Lishui Central Hospital (10 cases), Huzhou Central Hospital (1 case) and Ningbo Lihuili Hospital (1 case) from September 2017 to June 2021 were retrospectively analyzed. Of 100 patients, 64 were males and 36 were females; the mean age was (61.3 ± 11.1) years and the BMI was (22.7±11.1) kg/m(2). For TNM stage, 68 patients were stage IA, 24 were stage IIA and 8 were stage IIB. Postoperative functional results and postoperative complications of radical gastrectomy with Giraffe reconstruction were analyzed and summarized. Gastroesophageal reflux disease questionnaire (RDQ) score and postoperative endoscopy were used to evaluate the occurrence of reflux esophagitis and its grade (grade N, grade A, grade B, grade C, and grade D from mild to severe reflux). The continuous data conforming to normal distribution were expressed as (mean ± standard deviation), and those with skewed distribution were presented as median (Q1, Q3). Results: All the 100 patients successfully completed R0 resection, including 77 patients undergoing laparoscopic surgery and 23 patients undergoing laparotomy. The Giraffe anastomosis time was (38.6±14.0) min; the blood loss was (73.0±18.4) ml; the postoperative hospital stay was 9.5 (8.2, 13.0) d; the hospitalization cost was (6.0±0.3) ten thousand yuan. Fourteen cases developed perioperative complications (14.0%), including 7 cases of pleural effusion or pneumonia, 3 cases of anastomotic leakage, 2 cases of gastric emptying disorder, 1 case of gastrointestinal hemorrhage and 1 case of anastomotic stenosis, who were all improved and discharged after symptomatic management. Patients were followed up for (33.3±1.6) months. Eight patients were found to have reflux symptoms by RDQ scale six months after surgery, and 11 patients (11/100,11.0%) were found to have reflux esophagitis by gastroscopy, including 6 in grade A, 3 in grade B, and 2 in grade C. All the patients could control their reflux symptoms with behavioral guidance or oral PPIs. Conclusion: Cheng's GIRAFFE reconstruction has good anti-reflux efficacy and gastric emptying function; it can be one of the choices of reconstruction methods after proximal gastrectomy.

[Impact of nonsteroidal anti-inflammatory drugs on efficacy of anti-PD-1 therapy for primary liver cancer]

OBJECTIVE

To assess the impact of nonsteroidal anti-inflammatory drugs (NSAIDs) on clinical outcomes of patients receiving anti-PD-1 immunotherapy for hepatocellular carcinoma.

METHODS

We conducted a retrospective study among 215 patients with primary liver cancer receiving immunotherapy between June, 2018 and October, 2020. The patients with balanced baseline characteristics were selected based on propensity matching scores, and among them 33 patients who used NSAIDs were matched at the ratio of 1∶3 with 78 patients who did not use NSAIDs. We compared the overall survival (OS), progression-free survival (PFS), and disease control rate (DCR) between the two groups.

RESULTS

There was no significant difference in OS between the patients using NSAIDs (29.7%) and those who did not use NSAIDs (70.2%). Univariate and multivariate analyses did not show an a correlation of NSAIDs use with DCR (univariate analysis: OR=0.602, 95% CI: 0.299-1.213, P=0.156; multivariate analysis: OR=0.693, 95% CI: 0.330-1.458, P=0.334), PFS (univariate analysis: HR=1.230, 95% CI: 0.789-1.916, P=0.361; multivariate analysis: HR=1.151, 95% CI: 0.732-1.810, P=9.544), or OS (univariate analysis: HR=0.552, 95% CI: 0.208-1.463, P=0.232; multivariate analysis: HR=1.085, 95% CI: 0.685-1.717, P=0.729).

CONCLUSION

Our results show no favorable effect of NSAIDs on the efficacy of immunotherapy in patients with advanced primary liver cancer, but this finding still needs to be verified by future prospective studies of large cohorts.

Probing the Gluonic Structure of the Deuteron with J/ψ Photoproduction in d+Au Ultraperipheral Collisions

Understanding gluon density distributions and how they are modified in nuclei are among the most important goals in nuclear physics. In recent years, diffractive vector meson production measured in ultraperipheral collisions (UPCs) at heavy-ion colliders has provided a new tool for probing the gluon density. In this Letter, we report the first measurement of J/ψ photoproduction off the deuteron in UPCs at the center-of-mass energy sqrt[s_{NN}]=200  GeV in d+Au collisions. The differential cross section as a function of momentum transfer -t is measured. In addition, data with a neutron tagged in the deuteron-going zero-degree calorimeter is investigated for the first time, which is found to be consistent with the expectation of incoherent diffractive scattering at low momentum transfer. Theoretical predictions based on the color glass condensate saturation model and the leading twist approximation nuclear shadowing model are compared with the data quantitatively. A better agreement with the saturation model has been observed. With the current measurement, the results are found to be directly sensitive to the gluon density distribution of the deuteron and the deuteron breakup process, which provides insights into the nuclear gluonic structure.

Single-Crystal Alkali Antimonide Photocathodes: High Efficiency in the Ultrathin Limit

The properties of photoemission electron sources determine the ultimate performance of a wide class of electron accelerators and photon detectors. To date, all high-efficiency visible-light photocathode materials are either polycrystalline or exhibit intrinsic surface disorder, both of which limit emitted electron beam brightness. In this Letter, we demonstrate the synthesis of epitaxial thin films of Cs_{3}Sb on 3C-SiC (001) using molecular-beam epitaxy. Films as thin as 4 nm have quantum efficiencies exceeding 2% at 532 nm. We also find that epitaxial films have an order of magnitude larger quantum efficiency at 650 nm than comparable polycrystalline films on Si. Additionally, these films permit angle-resolved photoemission spectroscopy measurements of the electronic structure, which are found to be in good agreement with theory. Epitaxial films open the door to dramatic brightness enhancements via increased efficiency near threshold, reduced surface disorder, and the possibility of engineering new photoemission functionality at the level of single atomic layers.

Catalytic Transformation of PET and CO2 into High-Value Chemicals

Polyethylene terephthalate (PET) and CO₂ , two chemical wastes that urgently need to be transformed in the environment, are converted simultaneously in a one-pot catalytic process through the synergistic coupling of three reactions: CO₂ hydrogenation, PET methanolysis and dimethyl terephthalate (DMT) hydrogenation. More interestingly, the chemical equilibria of both reactions were shifted forward due to a revealed dual-promotion effect, leading to significantly enhanced PET depolymerization. The overall methanol yield from CO₂ hydrogenation exceeded the original thermodynamic equilibrium limit since the methanol was in situ consumed in the PET methanolysis. The degradation of PET by a stoichiometric ratio of methanol was significantly enhanced because the primary product, DMT was hydrogenated to dimethyl cyclohexanedicarboxylate (DMCD) or p-xylene (PX). This synergistic catalytic process provides an effective way to simultaneously recycle two wastes, polyesters and CO₂ , for producing high-value chemicals.

High-Performance Dental Composites Based on Hierarchical Reinforcements

Use of high-performance fibers such as poly(p-phenylene-2,6-benzobisoxazole) (PBO) improves the mechanical properties of dental fiber-reinforced composites (FRCs). However, the surfaces of high-performance fibers are relatively inert, and the interface with the resin matrix is poor. This has become a limitation restricting the performance of PBO FRCs in dentistry. Nanomaterials were introduced onto PBO fibers to construct various hierarchical reinforcements to obtain a dental FRC with higher flexural performance and optimized interface bonding. Four hierarchical reinforcements were constructed: PBO-ZnO nanoparticles (NPs), PBO-ZnO nanowires (NWs), PBO-ZnO NPs–cage silsesquioxane (POSS), and PBO-ZnO NWs-POSS. Performance following this optimized method was evaluated at macroscale and microscale levels, including measurement of the interfacial properties and mechanical properties of FRCs. The physicochemical characteristics of PBO fibers before and after modification were measured to determine the interfacial bonding mechanisms and to verify the connection between the microinterface and macromechanical properties. The cytotoxicity of the preferred PBO FRC was evaluated using the CCK8 assay. In comparison to other designs, the interfacial shear strength (IFSS) of PBO-ZnO NWs-POSS was the highest (29.31 ± 2.40 MPa). The corresponding FRC had the highest flexural strength under a static load (925.0 ± 39.2 MPa), the flexural modulus (39.39 ± 1.41 GPa) was equivalent to that of human dentin, and in vitro cytotoxicity was acceptable. The interfacial bonding mechanisms of PBO-ZnO NWs-POSS resulted from mechanical interlocking, chemical bonds, hydrogen bonds, and van der Waals forces. In summary, the PBO-ZnO NWs-POSS hierarchical reinforcement was introduced in dental FRCs and showed remarkable enhancement of the IFSS and flexural properties. We verified that the PBO-ZnO NWs-POSS hierarchical reinforcement was successful. This PBO FRC may be applied in dentistry as a new option for endodontic posts. Our study provides an interface design strategy for developing high-performance FRCs reinforced with high-performance fibers for dental applications.

Lignocellulosic nanofibril aerogel via gas phase coagulation and diisocyanate modification for solvent absorption

Cellulose-based aerogels are considered to be carriers that can absorb oils and organic solvents owing to the merits of low density and high surface area. However, the natural hydrophility and poor mechanical strength often obstruct their widespread applications. In this work, Miscanthus-based dual cross-linked lignocellulosic nanofibril (LCNF) aerogels were prepared by gas phase coagulation and methylene diphenyl dissocyanate (MDI) modification. Due to physical and chemical cross-linking strategies, the optimally 4 M-LCNF aerogels had high surface area of 157.9 m²/g, water contact angle of 138.1°, and enhanced compression properties. Moreover, the modified aerogels exhibited absorption performance for various organic solvents, and the maximal absorption capacity of chloroform was 42 g/g aerogel. Because LCNF was directly produced from Miscanthus without using bleaching reagents, this research provided a more sustainable methodology to utilize lignocelluloses to design robust aerogels to deal with the leakage of oil and organic solvents in industrial applications.

Micromolar Metabolite Measurement in an Electronically Multiplexed Format

The detection of metabolites such as choline in blood are important in clinical care for patients with cancer and cardiovascular disease. Choline is only present in human blood at low concentrations hence accurate measurement in an affordable point-of-care format is extremely challenging. Integration of microfluidics on to complementary metal-oxide semiconductor (CMOS) technology has the potential to enable advanced sensing technologies with extremely low limit of detection that are well suited to multiple clinical metabolite measurements. Although CMOS and microfluidics are individually mature technologies, their integration has presented challenges that we overcome in a novel, cost-effective, single-step process. To demonstrate the process, we present the microfluidic integration of a metabolomics-on-CMOS point-of-care platform with four capillary microfluidic channels on top of a CMOS optical sensor array. The fabricated device was characterised to verify the required structural profile, mechanical strength, optical spectra, and fluid flow. As a proof of concept, we used the device for the in-vitro quantification of choline in human blood plasma with a limit of detection of 3.2 M and a resolution of 1.6 M.

Rotary table wobble error analysis and correction of a rotating accelerometer gravity gradiometer

In a rotating accelerometer gravity gradiometer (RAGG), rotary table wobble refers to the shift in the direction of the spin axis during operation. This motion causes errors in the output of the RAGG, but the mechanism is not clear. The purpose of this paper is to analyze the relationship between rotary table wobble and RAGG errors and to propose a method for rejecting these errors. We consider the influence of attitude changes, angular velocity, and angular acceleration caused by the wobble on the specific force, and we describe the error transmission process based on the accelerometer configuration and its measurement principle. Furthermore, we show through a simulated experiment that when the angular velocity noise caused by the wobble is 1 μrad/s, this will produce errors of tens of E. We propose a post-error correction method that is based on the higher-precision RAGG model and motion measurement. The errors in the two channels of the RAGG are reduced to 3.69 E and 1.85 E after error correction. The error analysis of the effects of wobble on a RAGG and the proposed error correction method are of great significance for the development of high-precision gradiometers.

Increased crystallinity of RuSe2/carbon nanotubes for enhanced electrochemical hydrogen generation performance

Ru-Based catalysts are significant in the green hydrogen generation via the electrochemical water-splitting reaction. Herein, it is found that the increased crystallinity of cubic RuSe₂ nanoparticles anchored over carbon nanotubes (RuSe₂/CNTs) could largely increase the hydrogen generation performance both in acidic and alkaline electrolytes. The freshly prepared RuSe₂/CNTs with low crystallinity had a very low catalytic performance for the HER, while the catalytic ability could be largely boosted by facile thermal annealing at 650 °C in an N₂ atmosphere, resulting from the increased crystallinity and electronic effect. The crystal structure enhancement of the RuSe₂ nanoparticles was well supported by the X-ray diffraction technique and the lattice fringes in the high-resolution transmission electron microscopy images. As a result, the catalyst exhibited largely improved catalytic performance compared to the freshly prepared RuSe₂/CNTs; specifically, the overpotentials of 48 and 64 mV were required to drive 10 mA cm^-2 in alkaline and acidic media when loaded on a glassy carbon electrode, much less than those of 109 and 120 mV for the freshly prepared RuSe₂/CNTs; the catalytic performance in the alkaline electrolyte was even close to that of the commercial Pt/C catalyst. Correspondingly, the improved catalytic stability, catalytic kinetics, charge transfer ability and catalytic efficiency of the active sites were also observed. The current work shows an effective approach and important understanding for catalytic performance enhancement via increased crystallinity by facile thermal annealing.

Photocurrent-driven transient symmetry breaking in the Weyl semimetal TaAs

Symmetry plays a central role in conventional and topological phases of matter, making the ability to optically drive symmetry changes a critical step in developing future technologies that rely on such control. Topological materials, like topological semimetals, are particularly sensitive to a breaking or restoring of time-reversal and crystalline symmetries, which affect both bulk and surface electronic states. While previous studies have focused on controlling symmetry via coupling to the crystal lattice, we demonstrate here an all-electronic mechanism based on photocurrent generation. Using second harmonic generation spectroscopy as a sensitive probe of symmetry changes, we observe an ultrafast breaking of time-reversal and spatial symmetries following femtosecond optical excitation in the prototypical type-I Weyl semimetal TaAs. Our results show that optically driven photocurrents can be tailored to explicitly break electronic symmetry in a generic fashion, opening up the possibility of driving phase transitions between symmetry-protected states on ultrafast timescales.

[Photothermal effect of nano-copper sulfide against tongue squamous cell carcinoma]

OBJECTIVE

To investigate the anti-tumor effect of BSA@CuS-PEG nanocomposites on tongue squamous cell carcinoma.

METHODS

Transmission electron microscopy, dynamic light scattering, Zeta potential and ultraviolet absorption spectroscopy were used to characterize the synthesized BSA@CuS-PEG nanocomposite, whose photothermal properties was assessed with near infrared Ⅱ region excitation light (1064 nm). The cytotoxicity of the nanocomposite in Cal27 and SCC9 cells was evaluated using CCK-8 assay, and its effect on cell cycle distribution was analyzed using flow cytometry. The in vivo antitumor effect of BSA@CuS-PEG was investigated in a Balb/c mouse model bearing subcutaneous Cal27 tumor xenograft.

RESULTS

The synthesized BSA@CuS-PEG nanocomposite showed a temperature variation (ΔT) of about 30 ℃ under near-infrared (NIR) irradiation (0.5 W/cm2), suggesting its excellent photothermal sensitivity. CCK-8 assay showed that BSA@CuS-PEG had no significant toxicity to tumor cells, but upon NIR irradiation, the nanocomposite produced a significant stronger inhibitory effect on Cal27 and SCC9 cells than free nanocomposites (P < 0.001). Cell cycle analysis showed that compared with free nanocomposites, BSA@CuS-PEG plus NIR irradiation caused more obvious cell cycle arrest at G2/M phase in tongue cancer cells (P < 0.001). In the tumor-bearing mice, BSA@CuS-PEG combined with NIR irradiation produced a significant anti-tumor effect as compared with saline treatment plus NIR irradiation (P < 0.001).

CONCLUSION

The BSA@CuS-PEG nanocomposite shows prominent photothermal properties and good anti-tumor effects both in vivo and in vitro, and thus provides a promising method for non-invasive early diagnosis and non-surgical treatment of primary tongue cancer.

A novel free-standing metal organic frameworks-derived cobalt sulfide polyhedron array for shuttle effect suppressive lithium-sulfur batteries

Metal-organic-frameworks-derived nanostructures have received broad attention for secondary batteries. However, many strategies focus on the preparation of dispersive materials, which need complicated steps and some additives for making electrodes of batteries. Here, we develop a novel free-standing Co₉S₈polyhedron array derived from ZIF-67, which grows on a three-dimensional carbon cloth for lithium-sulfur (Li-S) battery. The polar Co₉S₈provides strong chemical binding to immobilize polysulfides, which enables efficiently suppressing of the shuttle effect. The free-standing S@Co₉S₈polyhedron array-based cathode exhibits ultrahigh capacity of 1079 mAh g^-1after cycling 100 times at 0.1 C, and long cycling life of 500 cycles at 1 C, recoverable rate-performance and good temperature tolerance. Furthermore, the adsorption energies towards polysulfides are investigated by using density functional theory calculations, which display a strong binding with polysulfides.

Tsukushi and TSKU genotype in obesity and related metabolic disorders

PURPOSE

Whether Tsukushi (TSK) can protect against high-fat diet (HFD)-induced obesity and improve glucose metabolism remains controversial. Serum levels of TSK in the population have not been reported until now. We assessed the association among TSK level, TSKU genotype, and metabolic traits in humans.

METHODS

Associations between serum TSK levels and metabolic traits were assessed in 144 Han Chinese individuals. Loci in the TSKU gene region were further genotyped in 11,022 individuals. The association between the loci and serum TSK level was evaluated using the additive genetic model. The association between the loci and their metabolic traits in humans were also verified.

RESULTS

Lower TSK levels were observed in obese subjects than in control subjects (median and interquartile range 17.78:12.07-23.28 vs. 23.81:12.54-34.56, P < 0.05). However, in obese subjects, TSK was positively associated with BMI (β ± SE: 0.63 ± 0.31, P = 0.049), visceral fat area (β ± SE: 12.15 ± 5.94, P = 0.011), and deterioration of glucose metabolism. We found that rs11236956 was associated with TSK level in obese subjects (β 95% CI 0.17, 0.07-0.26; P = 0.0007). There was also a significant association between rs11236956 and metabolic traits in our population.

CONCLUSIONS

Our findings showed that serum TSK levels were associated with metabolic disorders in obese subjects. We also identified rs11236956 to be associated with serum TSK levels in obese subjects and with metabolic disorders in the total population.

Standard practice of presacral exposure during transvaginal natural orifice transluminal endoscopic surgery for sacrocolpopexy

We describe the standard practice of presacral exposure during transvaginal natural orifice transluminal endoscopic surgery (vNOTES) for sacrocolpopexy in women with uterine prolapse. In this video, we demonstrate the key techniques: identifying the right hypogastric nerve (rHN) before opening the pelvic peritoneum; removing the fat and loose connective tissue along the rHN to expose the presacral fascia; incising the presacral fascia to reach the presacral space to expose the middle sacral vasculature and the anterior longitudinal ligament (ALL) of the first sacral vertebra (S1) below the promontory; attaching the mesh to the ALL to avoid vessel injury; and completing the peritonealisation.

Clinical significance of PSMA, TERT and PDEF in malignant tumors of the prostate

The article "Clinical significance of PSMA, TERT and PDEF in malignant tumors of the prostate, by J. Situ, H. Zhang, L. Lu, K. Li, C. Hu, D.-J. Wang, published in Eur Rev Med Pharmacol Sci 2017; 21 (15): 3347-3352-PMID: 28829509" has been withdrawn from the authors due to inaccuracies in the research design. The Publisher apologizes for any inconvenience this may cause. https://www.europeanreview.org/article/13198.

Hydrolysis of waste polyethylene terephthalate catalyzed by easily recyclable terephthalic acid

Hydrolysis of polyethylene terephthalate (PET) is an efficient strategy for the depolymerization of waste PET to terephthalic acid (TPA), which can be used as a fundamental building block for the repolymerization of PET or for the synthesis of biodegradable plastics and metal-organic frameworks. However, most of the reported hydrolysis catalysts are strong acids or bases, which are soluble in reaction media and difficult to separate after the reaction, leading to high production costs and a profound influence on the environment. Herein, we propose the use of TPA, the basic unit of PET, as an acid catalyst to promote the hydrolysis of PET. Under optimized conditions, i.e., 2.5 g of PET, a TPA concentration of 0.1 g/mL, mass ratio PET:H₂O of 1:8, 220 °C of temperature, and 180 min of reaction time, a PET conversion of up to 100.0% and a TPA yield of 95.5% were achieved. Furthermore, the produced TPA exhibited a high purity of 99%, similar to that of fresh TPA, and was easily recoverable for PET hydrolysis without tedious workup and purification processes. More importantly, the hydrolysis efficiency was maintained over eight consecutive reaction cycles. Overall, this study provides a green, easy, and low-cost technology to recover and reuse TPA for waste PET hydrolysis.

Catalytic Amination of Polylactic Acid to Alanine

In comparison to the traditional petroleum-based plastics, polylactic acid, the most popular biodegradable plastic, can be decomposed into carbon dioxide and water in the environment. However, the natural degradation of polylactic acid requires a substantial period of time and, more importantly, it is a carbon-emitting process. Therefore, it is highly desirable to develop a novel transformation process that can upcycle the plastic trash into value-added products, especially with high chemical selectivity. Here we demonstrate a one-pot catalytic method to convert polylactic acid into alanine by a simple ammonia solution treatment using a Ru/TiO₂ catalyst. The process has a 77% yield of alanine at 140 °C, and an overall selectivity of 94% can be reached by recycling experiments. Importantly, no added hydrogen is used in this process. It has been verified that lactamide and ammonium lactate are the initial intermediates and that the dehydrogenation of ammonium lactate initiates the amination, while Ru nanoparticles are essential for the dehydrogenation/rehydrogenation and amination steps. The process demonstrated here could expand the application of polylactic acid waste and inspire new upcycling strategies for different plastic wastes.

A novel nanosphere-in-nanotube iron phosphide Li-ion battery anode displaying a long cycle life, recoverable rate-performance, and temperature tolerance

Currently, non-ideal anodes restricts the development of long-term stable Li-ion batteries. Several currently available high-capacity anode candidates are suffering from a large volumetric change during charge and discharge and non-stable solid interphase formation. Here, we develop a novel nanosphere-confined one-dimensional yolk-shell anode taking iron phosphide (FeP) as a demonstrating case study. Multiple FeP nanospheres are encapsulated inside an FeP nanotube through a magnetic field-assisted and templated approach, forming a nanosphere-in-nanotube yolk-shell (NNYS) structure. After long-term 1000 cycles at 2 A g^-1, the NNYS FeP anode shows a good capacity of 560 mA h g^-1, and a coulombic efficiency of 99.8%. A recoverable rate-performance is also obtained after three rounds of tests. Furthermore, the capacities and coulombic efficiency remain stable at temperatures of -10 °C and 45 °C, respectively, indicating good potential for use under different conditions.