Magnetic particle templating of hydrogels: engineering naturally derived hydrogel scaffolds with 3D aligned microarchitecture for nerve repair

OBJECTIVE

Hydrogel scaffolds hold promise for a myriad of tissue engineering applications, but often lack tissue-mimetic architecture. Therefore, in this work, we sought to develop a new technology for the incorporation of aligned tubular architecture within hydrogel scaffolds engineered from the bottom-up.

APPROACH

We report a platform fabrication technology-magnetic templating-distinct from other approaches in that it uses dissolvable magnetic alginate microparticles (MAMs) to form aligned columnar structures under an applied magnetic field. Removal of the MAMs yields scaffolds with aligned tubular microarchitecture that can promote cell remodeling for a variety of applications. This approach affords control of microstructure diameter and biological modification for advanced applications. Here, we sought to replicate the microarchitecture of the native nerve basal lamina using magnetic templating of hydrogels composed of glycidyl methacrylate hyaluronic acid and collagen I.

MAIN RESULTS

Magnetically templated hydrogels were characterized for particle alignment and micro-porosity. Overall MAM removal efficacy was verified by 96.8% removal of iron oxide nanoparticles. Compressive mechanical properties were well-matched to peripheral nerve tissue at 0.93 kPa and 1.29 kPa, respectively. In vitro, templated hydrogels exhibited approximately 36% faster degradation over 12 h, and were found to guide axon extension from dorsal root ganglia. Finally, in a pilot in vivo study utilizing a 10 mm rat sciatic nerve defect model, magnetically templated hydrogels demonstrated promising results with qualitatively increased remodeling and axon regeneration compared to non-templated controls.

SIGNIFICANCE

This simple and scalable technology has the flexibility to control tubular microstructure over long length scales, and thus the potential to meet the need for engineered scaffolds for tissue regeneration, including nerve guidance scaffolds.

Tunable methacrylated hyaluronic acid-based hydrogels as scaffolds for soft tissue engineering applications

Hyaluronic acid (HA)-based biomaterials have been explored for a number of applications in biomedical engineering, particularly as tissue regeneration scaffolds. Crosslinked forms of HA are more robust and provide tunable mechanical properties and degradation rates that are critical in regenerative medicine; however, crosslinking modalities reported in the literature vary and there are few comparisons of different scaffold properties for various crosslinking approaches. In this study, we offer direct comparison of two methacrylation techniques for HA (glycidyl methacrylate HA [GMHA] or methacrylic anhydride HA [MAHA]). The two methods for methacrylating HA provide degrees of methacrylation ranging from 2.4 to 86%, reflecting a wider range of properties than is possible using only a single methacrylation technique. We have also characterized mechanical properties for nine different tissues isolated from rat (ranging from lung at the softest to muscle at the stiffest) using indentation techniques and show that we can match the full range of mechanical properties (0.35-6.13 kPa) using either GMHA or MAHA. To illustrate utility for neural tissue engineering applications, functional hydrogels with adhesive proteins (either GMHA or MAHA base hydrogels with collagen I and laminin) were designed with effective moduli mechanically matched to rat sciatic nerve (2.47 ± 0.31 kPa). We demonstrated ability of these hydrogels to support three-dimensional axonal elongation from dorsal root ganglia cultures. Overall, we have shown that methacrylated HA provides a tunable platform with a wide range of properties for use in soft tissue engineering.

Oligonucleotide-functionalized hydrogels for sustained release of small molecule (aptamer) therapeutics

Natural and synthetic hydrogels have been widely investigated as biomaterial scaffolds to promote tissue repair and regeneration. Nevertheless, the scaffold alone is often insufficient to drive new tissue growth, instead requiring continuous delivery of therapeutics, such as proteins or other biomolecules that work in concert with structural support provided by the scaffold. However, because of the high-water content, hydrogels tend to be permeable and cause rapid release of the encapsulated drug, which could lead to serious complications from local overdose and may result in the significant waste of encapsulated therapeutic(s). To this end, we designed an oligonucleotide-functionalized hydrogel that can provide sustained and controlled delivery of therapeutics for up to 4 weeks. To prove this concept, we successfully achieved sustained release (for over 28 days) of model anti-Nogo receptor (anti-NgR) RNA aptamer from oligonucleotide-functionalized hyaluronic acid-based hydrogel by changing the complementarity between the short antisense sequences and the aptamer. Furthermore, the released aptamer successfully blocked neuro-inhibitory effects of myelin-derived inhibitors and promoted neurite outgrowth from rat dorsal root ganglia in vitro. Because antisense sequences can be designed to bind to proteins, peptides, and aptamer, our oligonucleotide-functionalized hydrogel offers a promising therapeutic delivery system to obtain controlled release (both bolus and sustained) of various therapeutics for the treatment of complex diseases and injury models, such as spinal cord injury. STATEMENT OF SIGNIFICANCE: Producing a therapeutic effect often requires the administration of multiple injections with high dosages. This regimen causes discomfort to the patient and raises cost of treatment. Additionally, systemic delivery of therapeutics often results in adverse effects; therefore, local delivery at the site of injury is desirable. Therefore, in this study, we designed an oligonucleotide-functionalized biomaterial platform using ssDNA oligonucleotides (immobile species) as antisense sequences to increase residence time and fine-tune the release of anti-nogo receptor aptamer (mobile species) for spinal cord injury application. Because antisense sequences can be designed to bind proteins, peptides, and aptamer, our hydrogel offers a promising delivery system to obtain controlled release of various therapeutics for the treatment of complex diseases and injury models.

Preparation and evaluation of microfluidic magnetic alginate microparticles for magnetically templated hydrogels

Our aim is to develop a hydrogel-based scaffold containing porous microchannels that mimic complex tissue microarchitecture and provide physical cues to guide cell growth for scalable, cost-effective tissue repair. These hydrogels are patterned through the novel process of magnetic templating where magnetic alginate microparticles (MAMs) are dispersed in a hydrogel precursor and aligned in a magnetic field before hydrogel crosslinking and subsequent MAM degradation, leaving behind an aligned, porous architecture. Here, a protocol for fabricating uniform MAMs using microfluidics was developed for improved reproducibility and tunability of templated microarchitecture. Through iron quantification, we find that this approach allows control over magnetic iron oxide loading of the MAMs. Using Brownian dynamics simulations and nano-computed tomography of templated hydrogels to examine MAM chain length and alignment, we find agreement between simulated and measured areal densities of MAM chains. Oscillatory rheology and stress relaxation experiments demonstrate that magnetically templated microchannels alter bulk hydrogel mechanical properties. Finally, in vitro studies where rat Schwann cells were cultured on templated hydrogels to model peripheral nerve injury repair demonstrate their propensity for providing cell guidance along the length of the channels. Our results show promise for a micro-structured biomaterial that could aid in tissue repair applications.

Lymphatic-to-blood vessel transition in adult microvascular networks: A discovery made possible by a top-down approach to biomimetic model development

OBJECTIVE

Emerging areas of vascular biology focus on lymphatic/blood vessel mispatterning and the regulation of endothelial cell identity. However, a fundamental question remains unanswered: Can lymphatic vessels become blood vessels in adult tissues? Leveraging a novel tissue culture model, the objective of this study was to track lymphatic endothelial cell fate over the time course of adult microvascular network remodeling.

METHODS

Cultured adult Wistar rat mesenteric tissues were labeled with BSI-lectin and time-lapse images were captured over five days of serum-stimulated remodeling. Additionally, rat mesenteric tissues on day 0 and day 3 and 5 post-culture were labeled for PECAM + LYVE-1 or PECAM + podoplanin.

RESULTS

Cultured networks were characterized by increases in blood capillary sprouting, lymphatic sprouting, and the number of lymphatic/blood vessel connections. Comparison of images from the same network regions identified incorporation of lymphatic vessels into blood vessels. Mosaic lymphatic/blood vessels contained lymphatic marker positive and negative endothelial cells.

CONCLUSIONS

Our results reveal the ability for lymphatic vessels to transition into blood vessels in adult microvascular networks and discover a new paradigm for investigating lymphatic/blood endothelial cell dynamics during microvascular remodeling.

Recent advances in nanotherapeutic strategies for spinal cord injury repair

Spinal cord injury (SCI) is a devastating and complicated condition with no cure available. The initial mechanical trauma is followed by a secondary injury characterized by inflammatory cell infiltration and inhibitory glial scar formation. Due to the limitations posed by the blood-spinal cord barrier, systemic delivery of therapeutics is challenging. Recent development of various nanoscale strategies provides exciting and promising new means of treating SCI by crossing the blood-spinal cord barrier and delivering therapeutics. As such, we discuss different nanomaterial fabrication methods and provide an overview of recent studies where nanomaterials were developed to modulate inflammatory signals, target inhibitory factors in the lesion, and promote axonal regeneration after SCI. We also review emerging areas of research such as optogenetics, immunotherapy and CRISPR-mediated genome editing where nanomaterials can provide synergistic effects in developing novel SCI therapy regimens, as well as current efforts and barriers to clinical translation of nanomaterials.

Advances in ex vivo models and lab-on-a-chip devices for neural tissue engineering

The technologies related to ex vivo models and lab-on-a-chip devices for studying the regeneration of brain, spinal cord, and peripheral nerve tissues are essential tools for neural tissue engineering and regenerative medicine research. The need for ex vivo systems, lab-on-a-chip technologies and disease models for neural tissue engineering applications are emerging to overcome the shortages and drawbacks of traditional in vitro systems and animal models. Ex vivo models have evolved from traditional 2D cell culture models to 3D tissue-engineered scaffold systems, bioreactors, and recently organoid test beds. In addition to ex vivo model systems, we discuss lab-on-a-chip devices and technologies specifically for neural tissue engineering applications. Finally, we review current commercial products that mimic diseased and normal neural tissues, and discuss the future directions in this field.

Decellularized peripheral nerve supports Schwann cell transplants and axon growth following spinal cord injury

Schwann cell (SC) transplantation has been comprehensively studied as a strategy for spinal cord injury (SCI) repair. SCs are neuroprotective and promote axon regeneration and myelination. Nonetheless, substantial SC death occurs post-implantation, which limits therapeutic efficacy. The use of extracellular matrix (ECM)-derived matrices, such as Matrigel, supports transplanted SC survival and axon growth, resulting in improved motor function. Because appropriate matrices are needed for clinical translation, we test here the use of an acellular injectable peripheral nerve (iPN) matrix. Implantation of SCs in iPN into a contusion lesion did not alter immune cell infiltration compared to injury only controls. iPN implants were larger and contained twice as many SC-myelinated axons as Matrigel grafts. SC/iPN animals performed as well as the SC/Matrigel group in the BBB locomotor test, and made fewer errors on the grid walk at 4 weeks, equalizing at 8 weeks. The fact that this clinically relevant iPN matrix is immunologically tolerated and supports SC survival and axon growth within the graft offers a highly translational possibility for improving efficacy of SC treatment after SCI. To our knowledge, it is the first time that an injectable PN matrix is being evaluated to improve the efficacy of SC transplantation in SCI repair.

The Open Source GAITOR Suite for Rodent Gait Analysis

Locomotive changes are often associated with disease or injury, and these changes can be quantified through gait analysis. Gait analysis has been applied to preclinical studies, providing quantitative behavioural assessment with a reasonable clinical analogue. However, available gait analysis technology for small animals is somewhat limited. Furthermore, technological and analytical challenges can limit the effectiveness of preclinical gait analysis. The Gait Analysis Instrumentation and Technology Optimized for Rodents (GAITOR) Suite is designed to increase the accessibility of preclinical gait analysis to researchers, facilitating hardware and software customization for broad applications. Here, the GAITOR Suite’s utility is demonstrated in 4 models: a monoiodoacetate (MIA) injection model of joint pain, a sciatic nerve injury model, an elbow joint contracture model, and a spinal cord injury model. The GAITOR Suite identified unique compensatory gait patterns in each model, demonstrating the software’s utility for detecting gait changes in rodent models of highly disparate injuries and diseases. Robust gait analysis may improve preclinical model selection, disease sequelae assessment, and evaluation of potential therapeutics. Our group has provided the GAITOR Suite as an open resource to the research community at www.GAITOR.org, aiming to promote and improve the implementation of gait analysis in preclinical rodent models.

Biomimetic hydrogels direct spinal progenitor cell differentiation and promote functional recovery after spinal cord injury

OBJECTIVE

Demyelination that results from disease or traumatic injury, such as spinal cord injury (SCI), can have a devastating effect on neural function and recovery. Many researchers are examining treatments to minimize demyelination by improving oligodendrocyte availability in vivo. Transplantation of stem and oligodendrocyte progenitor cells is a promising option, however, trials are plagued by undirected differentiation. Here we introduce a biomaterial that has been optimized to direct the differentiation of neural progenitor cells (NPCs) toward oligodendrocytes as a cell delivery vehicle after SCI.

APPROACH

A collagen-based hydrogel was modified to mimic the mechanical properties of the neonatal spinal cord, and components present in the developing extracellular matrix were included to provide appropriate chemical cues to the NPCs to direct their differentiation toward oligodendrocytes. The hydrogel with cells was then transplanted into a unilateral cervical contusion model of SCI to examine the functional recovery with this treatment. Six behavioral tests and histological assessment were performed to examine the in vivo response to this treatment.

MAIN RESULTS

Our results demonstrate that we can achieve a significant increase in oligodendrocyte differentiation of NPCs compared to standard culture conditions using a three-component biomaterial composed of collagen, hyaluronic acid, and laminin that has mechanical properties matched to those of neonatal neural tissue. Additionally, SCI rats with hydrogel transplants, with and without NPCs, showed functional recovery. Animals transplanted with hydrogels with NPCs showed significantly increased functional recovery over six weeks compared to the media control group.

SIGNIFICANCE

The three-component hydrogel presented here has the potential to provide cues to direct differentiation in vivo to encourage regeneration of the central nervous system.

Injectable hydrogels of optimized acellular nerve for injection in the injured spinal cord

OBJECTIVE

Spinal cord injury (SCI) affects a quarter million individuals in the United States, and there is currently no clinical treatment. Both fresh and acellular peripheral nerve grafts can induce spinal axon regeneration and support functional recovery in experimental injury models. Nonetheless, a scaffold that can be injected into a spinal contusion would be far less invasive to apply. We aimed to develop the first injectable acellular nerve graft for promoting repair after contusion SCI.

APPROACH

We report a method to enzymatically solubilize optimized acellular (OA) nerve-a decellularized peripheral nerve graft developed in our laboratory and currently used clinically-to obtain an injectable solution that undergoes thermal gelation under physiological conditions. We quantified multiple physical and compositional properties of this novel material as well as tested its efficacy at acute and chronic time points following cervical contusion SCI.

MAIN RESULTS

This injectable optimized acellular (iOA) nerve graft retains native chemical cues such as collagens and glycosaminoglycans. By varying hydrogel concentration, the rheological properties and compressive modulus of iOA were similar to that previous reported for rat central nervous tissue. iOA solution was compatible with rat Schwann cells in culture, and hydrogel injection into a rat cervical contusion model significantly reduced the ratio of M1:M2 macrophages after one week, favoring regenerative phenotypes (p < 0.05). Furthermore, while iOA treatment did not affect locomotor or respiratory recovery over an eight week period, the percentage of axonal coverage increased at the distal tissue interface (p < 0.05), suggesting enhanced axonal extension within this region.

SIGNIFICANCE

Our data indicate that this novel injectable form of acellular nerve grafts is amenable for use after contusion SCI and may bolster a simultaneous therapy by acutely modulating the inflammatory milieu and supporting axonal growth.

Tissue-Engineered Peripheral Nerve Interfaces

Research on neural interfaces has historically concentrated on development of systems for the brain; however, there is increasing interest in peripheral nerve interfaces (PNIs) that could provide benefit when peripheral nerve function is compromised, such as for amputees. Efforts focus on designing scalable and high-performance sensory and motor peripheral nervous system interfaces. Current PNIs face several design challenges such as undersampling of signals from the thousands of axons, nerve-fiber selectivity, and device-tissue integration. To improve PNIs, several researchers have turned to tissue engineering. Peripheral nerve tissue engineering has focused on designing regeneration scaffolds that mimic normal nerve extracellular matrix composition, provide advanced microarchitecture to stimulate cell migration, and have mechanical properties like the native nerve. By combining PNIs with tissue engineering, the goal is to promote natural axon regeneration into the devices to facilitate close contact with electrodes; in contrast, traditional PNIs rely on insertion or placement of electrodes into or around existing nerves, or do not utilize materials to actively facilitate axon regeneration. This review presents the state-of-the-art of PNIs and nerve tissue engineering, highlights recent approaches to combine neural-interface technology and tissue engineering, and addresses the remaining challenges with foreign-body response.

Processing-Size Correlations in the Preparation of Magnetic Alginate Microspheres Through Emulsification and Ionic Crosslinking

Magnetic alginate microspheres are biocompatible due to their alginate matrix, and motion-controllable by applied magnetic fields due to their magnetic character. Therefore, they have the potential of being used as vessels to a broad variety of materials, including drugs and therapeutic agents, facilitating entry to biological systems in a relatively non-invasive manner. Here, magnetic alginate microspheres were prepared through an emulsification and ionic cross-linking process, where a mixture of alginate and iron oxide magnetic nanoparticles was initially dispersed in a continuous phase, followed by gelation of this dispersed phase into microspheres by cross-linking the dispersion with calcium ions. The resulting magnetic alginate microspheres were found to be superparamagnetic and to respond to applied magnetic fields by chain formation. The effect of shear rate, alginate concentration, and magnetic nanoparticle concentration on microsphere size was investigated with the aim to control the size of microspheres with respect to process and formulation parameters. Two of these parameters, shear rate and alginate concentration, were used to correlate experimental results with a theoretical model for the case where the dispersed phase is more viscous than the continuous phase.

Creation of an injectable in situ gelling native extracellular matrix for nucleus pulposus tissue engineering

BACKGROUND CONTEXT

Disc degeneration is the leading cause of low back pain and is often characterized by a loss of disc height, resulting from cleavage of chondroitin sulfate proteoglycans (CSPGs) present in the nucleus pulposus. Intact CSPGs are critical to water retention and maintenance of the nucleus osmotic pressure. Decellularization of healthy nucleus pulposus tissue has the potential to serve as an ideal matrix for tissue engineering of the disc because of the presence of native disc proteins and CSPGs. Injectable in situ gelling matrices are the most viable therapeutic option to prevent damage to the anulus fibrosus and future disc degeneration.

PURPOSE

The purpose of this research was to create a gentle decellularization method for use on healthy nucleus pulposus tissue explants and to develop an injectable formulation of this matrix to enable therapeutic use without substantial tissue disruption.

STUDY DESIGN

Porcine nuclei pulposi were isolated, decellularized, and solubilized. Samples were assessed to determine the degree of cell removal, matrix maintenance, gelation ability, cytotoxic residuals, and native cell viability.

METHODS

Nuclei pulposi were decellularized using serial detergent, buffer, and enzyme treatments. Decellularized nuclei pulposi were solubilized, neutralized, and buffered. The efficacy of decellularization was assessed by quantifying DNA removal and matrix preservation. An elution study was performed to confirm removal of cytotoxic residuals. Gelation kinetics and injectability were quantified. Long-term in vitro experiments were performed with nucleus pulposus cells to ensure cell viability and native matrix production within the injectable decellularized nucleus pulposus matrices.

RESULTS

This work resulted in the creation of a robust acellular matrix (>96% DNA removal) with highly preserved sulfated glycosaminoglycans (>47%), and collagen content and microstructure similar to native nucleus pulposus, indicating preservation of disc components. Furthermore, it was possible to create an injectable formulation that gelled in situ within 45 minutes and formed fibrillar collagen with similar diameters to native nucleus pulposus. The processing did not result in any remaining cytotoxic residuals. Solubilized decellularized nucleus pulposus samples seeded with nucleus pulposus cells maintained robust viability (>89%) up to 21 days of culture in vitro, with morphology similar to native nucleus pulposus cells, and exhibited significantly enhanced sulfated glycosaminoglycans production over 21 days.

CONCLUSIONS

A gentle decellularization of porcine nucleus pulposus followed by solubilization enabled the creation of an injectable tissue-specific matrix that is well tolerated in vitro by nucleus pulposus cells. These matrices have the potential to be used as a minimally invasive nucleus pulposus therapeutic to restore disc height.

[Otorhinolaryngology in the field of demography, growing outpatient care and regionalization]

BACKGROUND

Otorhinolaryngology (ENT) departments are strongly affected by current changes in the reimbursement schemes for inpatients. The study was designed to investigate these effects on the ENT Department in Rostock and selected comparison clinics, as well as to outline solutions.

METHODS

We analyzed diagnosis-related group (DRG) reports of the ENT Clinic at Rostock University Medical Center from 2013 to 2015, according to the size of the outpatient potential. Comparisons were made with other surgical departments such as maxillofacial surgery and ophthalmology in terms of average length of stay and the resulting deductibles. We also compared billing as day surgery and complete outpatient surgery for the main small surgical procedures such as tonsillectomy and septum surgery. Finally, we compared the discounts with 22 ENT departments in other maximum care hospitals.

RESULTS

The average case mix index of an ENT department in Germany is 0.75, case load average of 2,500 patients and common length of stay 4.1 days. In a typical academic ENT department as in Rostock, health plans usually discount around 500 T€ (thousand euro), which is considerably higher than comparable departments, e.g., oral and maxillofacial surgery or ophthalmology departments. However, discounts on a DRG for inpatient surgery is still approximately 1,000 € more revenue than surgery in an outpatient setting. The benchmark analysis shows that health plans in rural areas are more likely to accept inpatient surgery with discounts for small procedures than strict billing according to outpatient reimbursement schemes.

CONCLUSION

These effects can result in an insufficient cost effectiveness of ENT departments in Germany. As a consequence, substantial restructuring of the in- and outpatient treatment seems necessary, also for academic ENT departments, e.g., in the form of day surgery or ambulatory surgical centers, outpatient clinics with special contracts and specialized inpatient surgery. However, this results in greater demands on the training of young physicians and management of patient flows within the department.

Ultrasound-guided photoacoustic imaging-directed re-endothelialization of acellular vasculature leads to improved vascular performance

As increasing effort is dedicated to investigating the regenerative capacity of decellularized tissues, research has progressed to recellularizing these tissues prior to implantation. The delivery and support of cells seeded throughout acellular scaffolds are typically conducted through the vascular axis of the tissues. However, it is unclear how cell concentration and injection frequency can affect the distribution of cells throughout the scaffold. Furthermore, what effects re-endothelialization have on vascular patency and function are not well understood. We investigated the use of ultrasound-guided photoacoustic (US/PA) imaging as a technique to visualize the distribution of microvascular endothelial cells within an optimized acellular construct upon re-endothelialization and perfusion conditioning. We also evaluated the vascular performance of the re-endothelialized scaffold using quantitative vascular corrosion casting (qVCC) and whole-blood perfusion. We found US/PA imaging was an effective technique to visualize the distribution of cells. Cellular retention following perfusion conditioning was also detected with US/PA imaging. Finally, we demonstrated that a partial recovery of vascular performance is possible following re-endothelialization-confirmed by fewer extravasations in qVCC and improved blood clearance following whole-blood perfusion.

STATEMENT OF SIGNIFICANCE

Re-endothelialization is a method that enables decellularized tissue to become useful as a tissue engineering construct by creating a nutrient delivery and waste removal system for the entire construct. Our approach utilizes a decellularization method that retains the basement ECM of a highly vascularized tissue upon which endothelial cells can be injected to form an endothelium. The US/PA method allows for rapid visualization of cells within a construct several cm thick. This approach can be experimentally used to observe changes in cellular distribution over large intervals of time, to help optimize cell seeding parameters, and to verify cell retention within re-endothelialized constructs. This approach has temporal and depth advantages compared to section reconstruction and imaged fluorophores respectively.

Localized and sustained release of brain-derived neurotrophic factor from injectable hydrogel/microparticle composites fosters spinal learning after spinal cord injury

Injectable hydrogel allows for sustained delivery of growth factor resulting in spinal mediated learning after injury.

Conductive interpenetrating networks of polypyrrole and polycaprolactone encourage electrophysiological development of cardiac cells

Conductive and electroactive polymers have the potential to enhance engineered cardiac tissue function. In this study, an interpenetrating network of the electrically-conductive polymer polypyrrole (PPy) was grown within a matrix of flexible polycaprolactone (PCL) and evaluated as a platform for directing the formation of functional cardiac cell sheets. PCL films were either treated with sodium hydroxide to render them more hydrophilic and enhance cell adhesion or rendered electroactive with PPy grown via chemical polymerization yielding PPy-PCL that had a resistivity of 1.0 ± 0.4 kΩ cm, which is similar to native cardiac tissue. Both PCL and PPy-PCL films supported cardiomyocyte attachment; increasing the duration of PCL pre-treatment with NaOH resulted in higher numbers of adherent cardiomyocytes per unit area, generating cell densities which were more similar to those on PPy-PCL films (1568 ± 126 cells mm(-2), 2880 ± 439 cells mm(-2), 3623 ± 456 cells mm(-2) for PCL with 0, 24, 48 h of NaOH pretreatment, respectively; 2434 ± 166 cells mm(-2) for PPy-PCL). When cardiomyocytes were cultured on the electrically-conductive PPy-PCL, more cells were observed to have peripheral localization of the gap junction protein connexin-43 (Cx43) as compared to cells on NaOH-treated PCL (60.3 ± 4.3% vs. 46.6 ± 5.7%). Cx43 gene expression remained unchanged between materials. Importantly, the velocity of calcium wave propagation was faster and calcium transient duration was shorter for cardiomyocyte monolayers on PPy-PCL (1612 ± 143 μm/s, 910 ± 63 ms) relative to cells on PCL (1129 ± 247 μm/s, 1130 ± 20 ms). In summary, PPy-PCL has demonstrated suitability as an electrically-conductive substrate for culture of cardiomyocytes, yielding enhanced functional properties; results encourage further development of conductive substrates for use in differentiation of stem cell-derived cardiomyocytes and cardiac tissue engineering applications.

STATEMENT OF SIGNIFICANCE

Current conductive materials for use in cardiac regeneration are limited by cytotoxicity or cost in implementation. In this manuscript, we demonstrate for the first time the application of a biocompatible, conductive polypyrrole-polycaprolactone film as a platform for culturing cardiomyocytes for cardiac regeneration. This study shows that the novel conductive film is capable of enhancing cell-cell communication through the formation of connexin-43, leading to higher velocities for calcium wave propagation and reduced calcium transient durations among cultured cardiomyocyte monolayers. Furthermore, it was demonstrated that chemical modification of polycaprolactone through alkaline-mediated hydrolysis increased overall cardiomyocyte adhesion. The results of this study provide insight into how cardiomyocytes interact with conductive substrates and will inform future research efforts to enhance the functional properties of cardiomyocytes, which is critical for their use in pharmaceutical testing and cell therapy.

Macromol. Rapid Commun. 21/2015

Back Cover: Tissue scaffolds allowing the behavior of the cells that reside within them to be controlled are of particular interest for tissue engineering. Herein, the preparation of conductive nanofiber-based bone tissue scaffolds are described, made from nonwoven mats of electrospun polycaprolactone with an interpenetrating network of polypyrrole and polystyrenesulfonate. These scaffolds enable the electrical stimulation of human mesenchymal stem cells to enhance their differentiation toward osteogenic outcomes. Further details can be found in the article by J. G. Hardy,* M. K. Villancio-Wolter, R. C. Sukhavasi, D. J. Mouser, D. Aguilar Jr., S. A. Geissler, D. L. Kaplan,* and C. E. Schmidt* on page 1884.

Electrical Stimulation of Human Mesenchymal Stem Cells on Conductive Nanofibers Enhances their Differentiation toward Osteogenic Outcomes

Tissue scaffolds allowing the behavior of the cells that reside within them to be controlled are of particular interest for tissue engineering. Herein, the preparation of conductive fiber-based bone tissue scaffolds (nonwoven mats of electrospun polycaprolactone with an interpenetrating network of polypyrrole and polystyrenesulfonate) is described that enable the electrical stimulation of human mesenchymal stem cells to enhance their differentiation toward osteogenic outcomes.