Signal Discrimination Between Fluorescent Proteins in Live Cells by Long-wavelength Optical Modulation

Fluorescent proteins (FPs) have revolutionized molecular and cellular biology; yet, discrimination over cellular autofluorescence, spectral deconvolution, or detection at low concentrations remain challenging problems in many biological applications. By optically depopulating a photoinduced dark state with orange secondary laser co-excitation, the higher-energy green AcGFP fluorescence is dynamically increased. Modulating this secondary laser then modulates the higher-energy, collected fluorescence; enabling its selective detection by removing heterogeneous background from other FPs. Order-of-magnitude reduction in obscuring fluorophore background emission has been achieved in both fixed and live cells. This longwavelength modulation expands the dimensionality to discriminate FP emitters based on dark state lifetimes and enables signal of interest to be recovered by removing heterogeneous background emitter signals. Thus, AcGFP is not only useful for extracting weak signals from systems plagued by high background, but it is a springboard for further FP optimization and utilization for improving sensitivity and selectivity in biological fluorescence imaging.

A fluorogenic probe for the catalyst-free detection of azide-tagged molecules

Fluorogenic reactions in which non- or weakly fluorescent reagents produce highly fluorescent products can be exploited to detect a broad range of compounds including biomolecules and materials. We describe a modified dibenzocyclooctyne that under catalyst-free conditions undergoes fast strain-promoted cycloadditions with azides to yield strongly fluorescent triazoles. The cycloaddition products are more than 1000-fold brighter compared to the starting cyclooctyne, exhibit large Stokes shift, and can be excited above 350 nm, which is required for many applications. Quantum mechanical calculations indicate that the fluorescence increase upon triazole formation is due to large differences in oscillator strengths of the S(0) ↔ S(1) transitions in the planar C(2v)-symmetric starting material compared to the symmetry-broken and nonplanar cycloaddition products. The new fluorogenic probe was successfully employed for labeling of proteins modified by an azide moiety.

9-Aryl-9-xanthenols: a convenient platform for the design of fluorimetric and colorimetric pH indicators

In aqueous and alcohol solutions, colorless and non-fluorescent derivatives of 9-aryl-9H-xanthen-9-ol equilibrate with brightly colored and fluorescent 9-arylxanthylium cations, thus offering a convenient platform for the design of dual-mode indicators for emission and absorption-based pH measurements. The position of the prototropic equilibrium depends only on the hydronium ion concentration and is not affected by general acids or other ions. Furthermore, the equilibrium equivalence point can be readily adjusted by introducing substituents in the xanthenol core. As dehydroxylation of 3,6-dialkoxy-9-(o-tolyl)-9-xanthenol occurs at pH = 6.5, indicators of this type are well suited for biological applications as illustrated by in vitro cell culture studies with NIH 3T3 cells.

Designed to dissolve: suppression of colloidal aggregation of Cu(I)-selective fluorescent probes in aqueous buffer and in-gel detection of a metallochaperone

Due to the lipophilicity of the metal-ion receptor, previously reported Cu(I)-selective fluorescent probes form colloidal aggregates, as revealed by dynamic light scattering. To address this problem, we have developed a hydrophilic triarylpyrazoline-based fluorescent probe, CTAP-2, that dissolves directly in water and shows a rapid, reversible, and highly selective 65-fold fluorescence turn-on response to Cu(I) in aqueous solution. CTAP-2 proved to be sufficiently sensitive for direct in-gel detection of Cu(I) bound to the metallochaperone Atox1, demonstrating the potential for cation-selective fluorescent probes to serve as tools in metalloproteomics for identifying proteins with readily accessible metal-binding sites.

Metal Ion-Responsive Fluorescent Probes for Two-Photon Excitation Microscopy

Metal ion-responsive fluorescent probes are powerful tools for visualizing labile metal ion pools in live cells. To take full advantage of the benefits offered by two-photon excitation microscopy, including increased depth penetration, reduced phototoxicity, and intrinsic 3D capabilities, the photophysical properties of the probes must be optimized for nonlinear excitation. This review summarizes the challenges associated with the design of two-photon excitable fluorescent probes and labels and offers an overview on recent efforts in developing selective and sensitive reagents for the detection of metal ions in biological systems.

High-contrast Cu(I)-selective fluorescent probes based on synergistic electronic and conformational switching

The design of fluorescent probes for the detection of redox-active transition metals such as Cu(I/II) is challenging due to potentially interfering metal-induced non-radiative deactivation pathways. By using a ligand architecture with a built-in conformational switch that maximizes the change in donor potential upon metal binding and an electronically decoupled tunable pyrazoline fluorophore as acceptor, we systematically optimized the photoinduced electron transfer (PET) switching behavior of a series of Cu(I)-selective probes and achieved an excellent fluorescence enhancement of greater than 200-fold. Crystal structure analysis combined with NMR solution studies revealed significant conformational changes of the ligand framework upon Cu(I) coordination. The photophysical data are consistent with a kinetically controlled PET reaction involving only the ligand moiety, despite the fact that Cu(I)-mediated reductive quenching would be thermodynamically preferred. The study demonstrates that high-contrast ratios can be achieved even for redox-active metal cations, providing that the metal-initiated quenching pathways are kinetically unfavorable.

Kinetically controlled photoinduced electron transfer switching in Cu(I)-responsive fluorescent probes

Copper(I)-responsive fluorescent probes based on photoinduced electron transfer (PET) switching consistently display incomplete recovery of emission upon Cu(I) binding compared to the corresponding isolated fluorophores, raising the question of whether Cu(I) might engage in adverse quenching pathways. To address this question, we performed detailed photophysical studies on a series of Cu(I)-responsive fluorescent probes that are based on a 16-membered thiazacrown receptor ([16]aneNS(3)) tethered to 1,3,5-triarylpyrazoline-fluorophores. The fluorescence enhancement upon Cu(I) binding, which is mainly governed by changes in the photoinduced electron transfer (PET) driving force between the ligand and fluorophore, was systematically optimized by increasing the electron withdrawing character of the 1-aryl-ring, yielding a maximum 29-fold fluorescence enhancement upon saturation with Cu(I) in methanol and a greater than 500-fold enhancement upon protonation with trifluoroacetic acid. Time-resolved fluorescence decay data for the Cu(I)-saturated probe indicated the presence of three distinct emissive species in methanol. Contrary to the notion that Cu(I) might engage in reductive electron transfer quenching, femtosecond time-resolved pump-probe experiments provided no evidence for formation of a transient Cu(II) species upon photoexcitation. Variable temperature (1)H NMR experiments revealed a dynamic equilibrium between the tetradentate NS(3)-coordinated Cu(I) complex and a ternary complex involving coordination of a solvent molecule, an observation that was further supported by quantum chemical calculations. The combined photophysical, electrochemical, and solution chemistry experiments demonstrate that electron transfer from Cu(I) does not compete with radiative deactivation of the excited fluorophore, and, hence, that the Cu(I)-induced fluorescence switching is kinetically controlled.

Electronically tuned 1,3,5-triarylpyrazolines as Cu(I)-selective fluorescent probes

We have prepared and characterized a Cu(i)-responsive fluorescent probe, constructed using a large tetradentate, 16-membered thiazacrown ligand ([16]aneNS(3)) and 1,3,5-triaryl-substituted pyrazoline fluorophores. The fluorescence contrast ratio upon analyte binding, which is mainly governed by changes of the photoinduced electron transfer (PET) driving force between the ligand and fluorophore, was systematically optimized by increasing the electron withdrawing character of the 1-aryl-ring, yielding a maximum 50-fold fluorescence enhancement upon saturation with Cu(i) in methanol and a greater than 300-fold enhancement upon protonation with trifluoroacetic acid. The observed fluorescence increase was selective towards Cu(i) over a broad range of mono- and divalent transition metal cations. Previously established Hammett LFERs proved to be a valuable tool to predict two of the PET key parameters, the acceptor potential (E(A/A(-)) and the excited state energy DeltaE(00), and thus to identify a set of pyrazolines that would best match the thermodynamic requirements imposed by the donor potential E(D(+)/D) of the thiazacrown receptor. The described approach should be applicable for rationally designing high-contrast pyrazoline-based PET probes selective towards other metal cations.

Fluorescent Probes and Labels for Cellular Imaging

Metal-responsive fluorescent indicators are powerful tools for visualizing trace metals with subcellular resolution. By taking advantage of the diverse photophysical properties of organic fluorophores, metal ion-selective fluorescent indicators have been rationally designed and tailored towards cellular applications. This review summarizes challenges associated with the probe design and describes recent efforts in our research group in developing selective and sensitive reagents for the detection of zinc and copper in mammalian cells.

Copper redistribution in Atox1-deficient mouse fibroblast cells

Quantitative synchrotron X-ray fluorescence (SXRF) imaging of adherent mouse fibroblast cells deficient in antioxidant-1 (Atox1), a metallochaperone protein responsible for delivering Cu to cuproenzymes in the trans-Golgi network, revealed striking differences in the subcellular Cu distribution compared with wild-type cells. Whereas the latter showed a pronounced perinuclear localization of Cu, the Atox1-deficient cells displayed a mostly unstructured and diffuse distribution throughout the entire cell body. Comparison of the SXRF elemental maps for Zn and Fe of the same samples showed no marked differences between the two cell lines. The data underscore the importance of Atox1, not only as a metallochaperone for delivering Cu to cuproenzymes, but also as a key player in maintaining the proper distribution and organization of Cu at the cellular level.

Predicting the photoinduced electron transfer thermodynamics in polyfluorinated 1,3,5-triarylpyrazolines based on multiple linear free energy relationships

The photophysical properties of 1,3,5-triarylpyrazolines are strongly influenced by the nature and position of substituents attached to the aryl-rings, rendering this fluorophore platform well suited for the design of fluorescent probes utilizing a photoinduced electron transfer (PET) switching mechanism. To explore the tunability of two key parameters that govern the PET thermodynamics, the excited state energy DeltaE(00) and the acceptor potential E(A/A(-)), a library of polyfluoro-substituted 1,3-diaryl-5-phenyl-pyrazolines was synthesized and characterized. The observed trends for the PET parameters were effectively captured through multiple Hammett linear free energy relationships (LFER) using a set of independent substituent constants for each of the two aryl rings. Given the lack of experimental Hammett constants for polyfluoro-substituted aromatics, theoretically derived constants based on the electrostatic potential at the nucleus (EPN) of carbon atoms were employed as quantum chemical descriptors. The performance of the LFER was evaluated with a set of compounds that were not included in the training set, yielding a mean unsigned error of 0.05 eV for the prediction of the combined PET parameters. The outlined LFER approach should be well suited for designing and optimizing the performance of cation-responsive 1,3,5-triarylpyrazolines.

Differential tuning of the electron transfer parameters in 1,3,5-triarylpyrazolines: a rational design approach for optimizing the contrast ratio of fluorescent probes

A large class of cation-responsive fluorescent sensors utilizes a donor-spacer-acceptor (D-A) molecular framework that can modulate the fluorescence emission intensity through a fast photoinduced intramolecular electron transfer (PET) process. The emission enhancement upon binding of the analyte defines the contrast ratio of the probe, a key property that is particularly relevant in fluorescence microscopy imaging applications. Due to their unusual electronic structure, 1,3,5-triarylpyrazoline fluorophores allow for the differential tuning of the excited-state energy DeltaE(00) and the fluorophore acceptor potential E(A/A(-)), both of which are critical parameters that define the electron transfer (ET) thermodynamics and thus the contrast ratio. By systematically varying the number and attachment positions of fluoro substituents on the fluorophore pi-system, DeltaE(00) can be adjusted over a broad range (0.4 eV) without significantly altering the acceptor potential E(A/A(-)). Experimentally measured D-A coupling and reorganization energies were used to draw a potential map for identifying the optimal ET driving force that is expected to give a maximum fluorescence enhancement for a given change in donor potential upon binding of the analyte. The rational design strategy was tested by optimizing the fluorescence response of a pH-sensitive probe, thus yielding a maximum emission enhancement factor of 400 upon acidification. Furthermore, quantum chemical calculations were used to reproduce the experimental trends of reduction potentials, excited-state energies, and ET driving forces within the framework of linear free energy relationships (LFERs). Such LFERs should be suitable to semiempirically predict ET driving forces with an average unsigned error of 0.03 eV, consequently allowing for the computational prescreening of substituent combinations to best match the donor potential of a given cation receptor. Within the scaffold of the triarylpyrazoline platform, the outlined differential tuning of the electron transfer parameters should be applicable to a broad range of cation receptors for designing PET sensors with maximized contrast ratios.

Anomalous photophysics of bis(hydroxystyryl)benzenes: a twist on the para/meta dichotomy

The dianions of two isomeric bis(hydroxystyryl)benzenes show dramatically different photophysical properties.

Excited-State Intramolecular Proton Transfer in 2-(2‘-Arylsulfonamidophenyl)benzimidazole Derivatives: The Effect of Donor and Acceptor Substituents

A series of water-soluble 2-(2'-arylsulfonamidophenyl)benzimidazole derivatives containing electron-donating and accepting groups attached to various positions of the fluorophore pi-system has been synthesized and characterized in aqueous solution at 0.1 M ionic strength. The measured pK(a)'s for deprotonation of the sulfonamide group of monosubstituted derivatives range between 6.75 and 9.33 and follow closely Hammett's free energy relationship. In neutral aqueous buffer, all compounds undergo efficient excited-state intramolecular proton transfer (ESIPT) to yield a strongly Stokes-shifted fluorescence emission from the phototautomer. Upon deprotonation of the sulfonamide nitrogen at high pH, ESIPT is interrupted to yield a new, blue-shifted emission band. The peak absorption and emission energies were strongly influenced by the nature of the substituents and their attachment positions on the fluorophore pi-system. The fluorescence quantum yield of the ESIPT tautomers revealed a significant correlation with the observed Stokes shifts. The study provides valuable information regarding substituent effects on the photophysical properties of this class of ESIPT fluorophores in an aqueous environment and may offer guidelines for designing emission ratiometric pH or metal-cation sensors for biological applications.

Excited State Intramolecular Proton Transfer in 2-(2‘-Arylsulfonamidophenyl)benzimidazole Derivatives: Insights into the Origin of Donor Substituent-Induced Emission Energy Shifts

Donor-substituted 2-(2'-arylsulfonamidophenyl)benzimidazoles undergo efficient excited-state intramolecular proton transfer (ESIPT) upon photoexcitation. The tautomer emission energy depends strongly on the substituent attachment position on the fluorophore pi-system. While substitution with a donor group in the para-position relative to the sulfonamide moiety yields an emission energy that is red-shifted relative to the unsubstituted fluorophore, fluorescence of the meta-substituted derivative appears blue-shifted. To elucidate the origin of the surprisingly divergent emission shifts, we performed detailed photophysical and quantum chemical studies with a series of methoxy- and pyrrole-substituted derivatives. The nature and contribution of solvent-solute interactions on the emission properties were analyzed on the basis of solvatochromic shift data using Onsager's reaction field model, Reichardt's empirical solvent polarity scale ET(30), as well as Kamlet-Abboud-Taft's empirical solvent index. The studies revealed that all ESIPT tautomers emit from a moderately polarized excited-state whose dipole moment is not strongly influenced by the donor-attachment position. Furthermore, the negative solvatochromic shift behavior was most pronounced in protic solvents presumably due to specific hydrogen-bonding interactions. The extrapolated gas-phase emission energies correlated qualitatively well with the trends in Stokes shifts, suggesting that solute-solvent interactions do not play a significant role in explaining the divergent emission energy shifts. Detailed quantum chemical calculations not only confirmed the moderately polarized nature of the ESIPT tautomers but also provided a rational for the observed emission shifts based on the differential change in the HOMO and LUMO energies. The results gained from this study should provide guidelines for tuning the emission properties of this class of ESIPT fluorophores with potential applications in analytical chemistry, biochemistry, or materials science.

Biological applications of X-ray fluorescence microscopy: exploring the subcellular topography and speciation of transition metals

Synchrotron X-ray fluorescence microscopy (SXRF) is a microanalytical technique for the quantitative mapping of elemental distributions. Among currently available imaging modalities, SXRF is the only technique that is compatible with fully hydrated biological samples such as whole cells or tissue sections, while simultaneously offering trace element sensitivity and submicron spatial resolution. Combined with the ability to provide information regarding the oxidation state and coordination environment of metal cations, SXRF is ideally suited to study the intracellular distribution and speciation of trace elements, toxic heavy metals and therapeutic or diagnostic metal complexes.

Correlative microXRF and optical immunofluorescence microscopy of adherent cells labeled with ultrasmall gold particles

Synchrotron-based X-ray fluorescence microscopy (microXRF) is a powerful tool to study the two-dimensional distribution of a wide range of biologically relevant elements in tissues and cells. By growing mouse fibroblast cells directly on formvar-carbon coated electron microscopy grids, microXRF elemental maps with well-defined subcellular resolution were obtained. In order to colocalize the elemental distribution with the location of specific cellular structures and organelles, we explored the application of a commercially available secondary antibody conjugated to FluoroNanogold, a dual-label that combines a regular organic fluorophore with a 1.4 nm Au-cluster as xenobiotic label for microXRF imaging. Adherent mouse fibroblast cells were grown on silicon nitride windows serving as biocompatible XRF support substrate, and labeled with FluoroNanogold in combination with primary antibodies specific for mitochondria or the Golgi apparatus, respectively. Raster scanning of the in-air dried cells with an incident X-ray energy of 11.95 keV, sufficient to ensure excitation of the Au Lalpha line, provided two-dimensional maps with submicron resolution for Au as well as for most biologically relevant elements. MicroXRF proved to be sufficiently sensitive to image the location and structural details of the Au-labeled organelles, which correlated well with the subcellular distribution visualized by means of optical fluorescence microscopy.

Imaging of the intracellular topography of copper with a fluorescent sensor and by synchrotron x-ray fluorescence microscopy

Copper is an essential micronutrient that plays a central role for a broad range of biological processes. Although there is compelling evidence that the intracellular milieu does not contain any free copper ions, the rapid kinetics of copper uptake and release suggests the presence of a labile intracellular copper pool. To elucidate the subcellular localization of this pool, we have synthesized and characterized a membrane-permeable, copper-selective fluorescent sensor (CTAP-1). Upon addition of Cu(I), the sensor exhibits a 4.6-fold emission enhancement and reaches a quantum yield of 14%. The sensor exhibits excellent selectivity toward Cu(I), and its emission response is not compromised by the presence of millimolar concentrations of Ca(II) or Mg(II) ions. Variable temperature dynamic NMR studies revealed a rapid Cu(I) self-exchange equilibrium with a low activation barrier of deltaG++ = 44 kJ.mol(-1) and k(obs) approximately 10(5) s(-1) at room temperature. Mouse fibroblast cells (3T3) incubated with the sensor produced a copper-dependent perinuclear staining pattern, which colocalizes with the subcellular locations of mitochondria and the Golgi apparatus. To evaluate and confirm the sensor's copper-selectivity, we determined the subcellular topography of copper by synchrotron-based x-ray fluorescence microscopy. Furthermore, microprobe x-ray absorption measurements at various subcellular locations showed a near-edge feature that is characteristic for low-coordinate monovalent copper but does not resemble the published spectra for metallothionein or glutathione. The presented data provide a coherent picture with strong evidence for a kinetically labile copper pool, which is predominantly localized in the mitochondria and the Golgi apparatus.

Zinc(II)-selective ratiometric fluorescent sensors based on inhibition of excited-state intramolecular proton transfer

To develop a zinc(II)-selective emission ratiometric probe suitable for biological applications, we explored the cation-induced inhibition of excited-state intramolecular proton transfer (ESIPT) with a series of 2-(2'-benzenesulfonamidophenyl)benzimidazole derivatives. In the absence of Zn(II) at neutral pH, the fluorophores undergo ESIPT to yield a highly Stokes' shifted emission from the proton-transfer tautomer. Coordination of Zn(II) inhibits the ESIPT process and yields a significant hypsochromic shift of the fluorescence emission maximum. Whereas the paramagnetic metal cations Cu(II), Fe(II), Ni(II), Co(II), and Mn(II) result in fluorescence quenching, the emission response is not altered by millimolar concentrations of Ca(II) or Mg(II), rendering the sensors selective for Zn(II) among all biologically important metal cations. Due to the modular architecture of the fluorophore, the Zn(II) binding affinity can be readily tuned by implementing simple structural modifications. The synthesized probes are suitable to gauge free Zn(II) concentrations in the micromolar to picomolar range under physiological conditions.

A fluorogenic probe for the copper(I)-catalyzed azide-alkyne ligation reaction: modulation of the fluorescence emission via 3(n,pi)-1(pi,pi) inversion

Chemoselective ligation reactions represent a powerful approach for labeling of proteins or small molecules in a biological environment. We report here a fluorogenic probe that is activated by click chemistry, a highly versatile bio-orthogonal and chemoselective ligation reaction which is based on the azide moiety as the functional group. The electron-donating properties of the triazole ring that is formed in the course of the coupling reaction was effectively utilized to modulate the fluorescence output of an electronically coupled coumarin fluorophore. Under physiological conditions the probe is essentially nonfluorescent and undergoes a bright emission enhancement upon ligation with an azide. Time-resolved emission spectroscopy and semiempirical quantum-mechanical calculations suggest that the fluorescence switching is due to an inversion of the energy ordering of the emissive 1(pi,pi*) and nonemissive 3(n,pi*) excited states. The rapid kinetics of the ligation reaction render the probe attractive for a wide range of applications in biology, analytical chemistry, or material science.