Predictions of the modified Biot-Attenborough model for the dependence of phase velocity on porosity in cancellous bone

The modified Biot-Attenborough (MBA) model for acoustic wave propagation in porous media has been found useful to predict wave properties in cancellous bone. The present study is aimed at applying the MBA model to predict the dependence of phase velocity on porosity in cancellous bone. The MBA model predicts a phase velocity that decreases nonlinearly with porosity. The optimum values for input parameters of the MBA model, such as compressional speed c(m) of solid bone and phase velocity parameter s(2), were determined by comparing the predictions with previously published measurements in human calcaneus and bovine cancellous bone. The value of the phase velocity parameter s(2)=1.23 was obtained by curve fitting to the experimental data for 53 human calcaneus samples only, assuming a compressional speed c(m)=2500 m/s of solid bone. The root-mean-square error (RMSE) of the curve fit was 15.3m/s. The optimized value of s(2) for all 75 cancellous bone samples including 22 bovine samples was 1.42 with a value of 55 m/s for the RMSE of the curve fit. The latter fit was obtained by using of a value of c(m)=3200 m/s. Although the MBA model relies on the empirical parameters determined from experimental data, it is expected that the model can be usefully employed as a practical tool in the field of clinical ultrasonic bone assessment.

Phase velocity and normalized broadband ultrasonic attenuation in Polyacetal cuboid bone-mimicking phantoms

The variations of phase velocity and normalized broadband ultrasonic attenuation (nBUA) with porosity were investigated in Polyacetal cuboid bone-mimicking phantoms with circular cylindrical pores running normal to the surface along the three orthogonal axes. The frequency-dependent phase velocity and attenuation coefficient in the phantoms with porosities from 0% to 65.9% were measured from 0.65 to 1.10 MHz. The results showed that the phase velocity at 880 kHz decreased linearly with porosity, whereas the nBUA increased linearly with porosity. This study provides a useful insight into the relationships between ultrasonic properties and porosity in bone at porosities lower than 70%.

Frequency dependencies of phase velocity and attenuation coefficient in a water-saturated sandy sediment from 0.3 to 1.0 MHz

The frequency-dependent phase velocity and attenuation coefficient for the fast longitudinal wave in a water-saturated sandy sediment were measured over the frequency range from 0.3 to 1.0 MHz. The experimental data of phase velocity exhibited the significant negative dispersion, with the mean rate of decline of 120 +/- 20 m/s/MHz. The Biot model predicted the approximately nondispersive phase velocity and the grain-shearing (GS) model exhibited the slightly positive dispersion. In contrast, the predictions of the multiple scattering models for the negative dispersion in the glass-grain composite were in general agreement with the experimental data for the water-saturated sandy sediment measured here. The experimental data of attenuation coefficient was found to increase nonlinearly with frequency from 0.3 to 1.0 MHz. However, both the Biot and the GS models yielded the attenuation coefficient increasing almost linearly with frequency. The total attenuation coefficient given by the algebraic sum of absorption and scattering components showed a reasonable agreement with the experimental data for overall frequencies. This study suggests that the scattering is the principal mechanism responsible for the variations of phase velocity and attenuation coefficient with frequency in water-saturated sandy sediments at high frequencies.

Dependence of particle volume fraction on sound velocity and attenuation of EPDM composites

The sound velocity and the attenuation coefficient of EPDM (Ethylene-propylene Diene Monomer) composites incorporated with Silicon Carbide particles (SiCp's) of various volume fractions (0-40%) were experimentally and theoretically investigated. For the experiment a through-transmission technique was used. For the theoretical prediction, some mechanical property models such as Reuss model and Coherent Potential Approximation (CPA) model etc. were employed. The experimental results showed that the sound velocity decreased with the increase of the SiCp volume fraction up to 30% and then increased with the 40 vol% specimen. The attenuation coefficient was increased with the increasing SiCp volume fractions. The modified Reuss model with a longitudinal elastic modulus predicted most well the experimental sound velocity and elastic modulus results.

Experimental study on subharmonic and ultraharmonic acoustic waves in water-saturated sandy sediment

Experimental observations of the subharmonic and ultraharmonic acoustic waves in water-saturated sandy sediment are reported in this paper. Acoustic pressures of both nonlinear acoustic waves strongly depend on the driving acoustic pressure at a transducer. The first ultraharmonic wave reaches a saturation value as the driving acoustic pressure increases. The acoustic pressure levels of both nonlinear acoustic waves exhibit some fluctuations in comparison with that of the primary acoustic wave as the receiving distance of hydrophone increases in sediment. The subharmonic and the ultraharmonic phenomena in this study show close resemblance to those produced in bubbly water.

Kondo effect in magnetic tunnel junctions

Tunneling magnetoresistance was found to be suppressed with decreasing temperature for magnetic tunnel junctions (MTJs) oxidized under high plasma power. A strong temperature dependence of the junction resistance was observed, along with zero-bias anomalies of dynamic resistance at low temperatures. Resistance shows a logarithmic dependence on temperature, and resistance versus temperature exhibits a scaling behavior. Our experimental data can be explained in a consistent way by the Kondo effect in the MTJs with the Kondo temperature TK=20-30 K.

Empirical angle-dependent Biot and MBA models for acoustic anisotropy in cancellous bone

The Biot and the modified Biot-Attenborough (MBA) models have been found useful to understand ultrasonic wave propagation in cancellous bone. However, neither of the models, as previously applied to cancellous bone, allows for the angular dependence of acoustic properties with direction. The present study aims to account for the acoustic anisotropy in cancellous bone, by introducing empirical angle-dependent input parameters, as defined for a highly oriented structure, into the Biot and the MBA models. The anisotropy of the angle-dependent Biot model is attributed to the variation in the elastic moduli of the skeletal frame with respect to the trabecular alignment. The angle-dependent MBA model employs a simple empirical way of using the parametric fit for the fast and the slow wave speeds. The angle-dependent models were used to predict both the fast and slow wave velocities as a function of propagation angle with respect to the trabecular alignment of cancellous bone. The predictions were compared with those of the Schoenberg model for anisotropy in cancellous bone and in vitro experimental measurements from the literature. The angle-dependent models successfully predicted the angular dependence of phase velocity of the fast wave with direction. The root-mean-square errors of the measured versus predicted fast wave velocities were 79.2 m s(-1) (angle-dependent Biot model) and 36.1 m s(-1) (angle-dependent MBA model). They also predicted the fact that the slow wave is nearly independent of propagation angle for angles about 50 degrees , but consistently underestimated the slow wave velocity with the root-mean-square errors of 187.2 m s(-1) (angle-dependent Biot model) and 240.8 m s(-1) (angle-dependent MBA model). The study indicates that the angle-dependent models reasonably replicate the acoustic anisotropy in cancellous bone.

Comparison of acoustic characteristics predicted by Biot's theory and the modified Biot-Attenborough model in cancellous bone

Biot's theory and the modified Biot-Attenborough (MBA) model are applied to predict the dependences of acoustic characteristics on frequency and on porosity in cancellous bone. The phase velocities and the attenuation coefficients predicted by both theories are compared with the experimental data of bovine cancellous bone specimens published in the literature. Biot's theory successfully predicts the dependences of the phase velocity on frequency and on porosity in cancellous bone, whereas a significant discrepancy is observed between the predicted and the measured attenuation coefficients. The MBA model agrees well with the frequency and the porosity dependences of the phase velocity and the attenuation coefficient experimentally measured in bovine bones. Although the MBA model relies on phenomenological parameters derived from the experimental data, its approach to cancellous bone can be usefully employed in the field of clinical ultrasonic bone assessment.

Feasibility of bone assessment with leaky Lamb waves in bone phantoms and a bovine tibia

In this study, the effect of cortical thickness variation on the propagation of leaky Lamb waves is investigated by using an axial transmission technique commonly used to characterize long bones. Three Lucite plates with thicknesses of 1, 3, and 5 mm as bone phantoms and one bovine tibia with a cortical thickness of 2 mm were used at various low frequencies. Experimental measurements in bone phantoms show that the peak frequency and amplitude of excited Lamb modes strongly depend on the thickness of the Lucite plate. In the bovine tibia, the S0 and A0 Lamb modes are consistently observed in the frequency-thickness region from 0.2 to 1.0 MHz mm, and can be effectively launched at a frequency of 200 kHz, suggesting 200 kHz to be the optimal signal frequency for in vivo clinical applications. It can be also seen that both modes are affected by the frequency-thickness product, but the effect is greater for the A0 mode. Hence, the A0 Lamb mode seems more sensitive to cortical thickness change due to aging and osteoporosis. This study suggests that the use of leaky Lamb waves is feasible for ultrasonic bone assessment.

Acoustic wave propagation in bovine cancellous bone: application of the Modified Biot-Attenborough model

Acoustic wave propagation in bovine cancellous bone is experimentally and theoretically investigated in the frequency range of 0.5-1 MHz. The phase velocity, attenuation coefficient, and broadband ultrasonic attenuation (BUA) of bovine cancellous bone are measured as functions of frequency and porosity. For theoretical estimation, the Modified Biot-Attenborough (MBA) model is employed with three new phenomenological parameters: the boundary condition, phase velocity, and impedance parameters. The MBA model is based on the idealization of cancellous bone as a nonrigid porous medium with circular cylindrical pores oriented normal to the surface. It is experimentally observed that the phase velocity is approximately nondispersive and the attenuation coefficient linearly increases with frequency. The MBA model predicts a slightly negative dispersion of phase velocity linearly with frequency and the nonlinear relationships of attenuation and BUA with porosity. The experimental results are in good agreement with the theoretical results estimated with the MBA model. It is expected that the MBA model can be usefully employed in the field of clinical bone assessment for the diagnosis of osteoporosis.

Correlations between acoustic properties and bone density in bovine cancellous bone from 0.5 to 2 MHz

Correlations between acoustic properties and bone density were investigated in the 12 defatted bovine cancellous bone specimens in vitro. Speed of sound (SOS) and broadband ultrasonic attenuation (BUA) were measured in three different frequency bandwidths from 0.5 to 2 MHz using three matched pairs of transducers with the center frequencies of 1, 2.25, and 3.5 MHz. The relative orientation between ultrasonic beam and bone specimen was the mediolateral (ML) direction of the bovine tibia. SOS shows significant linear positive correlation with apparent density for all three pairs of transducers. However, BUA shows relatively weak correlation with apparent density. SOS and BUA are only weakly correlated with each other. The linear combination of SOS and BUA in a multiple regression model leads to a significant improvement in predicting apparent density. The correlations among SOS, BUA, and bone density can be effectively and clearly represented in the three-dimensional space by the multiple regression model. These results suggest that the frequency range up to 1.5 MHz and the multiple regression model in the three-dimensional space can be useful in the osteoporosis diagnosis.

Grb2 dominantly associates with dynamin II in human hepatocellular carcinoma HepG2 cells

The two SH3 domains and one SH2 domain containing adaptor protein Grb2 is an essential element of the Ras signaling pathway in multiple systems. The SH2 domain of Grb2 recognizes and interacts with phosphotyrosine residues on activated tyrosine kinases, whereas the SH3 domains bind to several proline-rich domain-containing proteins such as Sos1. To define the difference in Grb2-associated proteins in hepatocarcinoma cells, we performed coprecipitation analysis using recombinant GST-Grb2 fusion proteins and found that several protein components (p170, p125, p100, and p80) differently associated with GST-Grb2 proteins in human Chang liver and hepatocarcinoma HepG2 cells. Sos1 and p80 proteins dominantly bind to Grb2 fusion proteins in Chang liver, whereas p100 remarkably associate with Grb2 in HepG2 cells. Also GST-Grb2 SH2 proteins exclusively bound to the p46(Shc), p52(Shc), and p66(Shc) are important adaptors of the Ras pathway in HepG2 cells. The p100 protein has been identified as dynamin II. We observed that the N-SH3 and C-SH3 domains of Grb2 fusion proteins coprecipitated with dynamin II besides Sos1. These results suggest that dynamin II may be a functional molecule involved in Grb2-mediated signaling pathway on Ras activation for tumor progression and differentiation of hepatocarcinoma cells.

Negative regulation of YY1 transcription factor on the dynamin I gene promoter

Dynamin I is highly expressed in brain and plays a critical role in clathrin-mediated endocytosis and synaptic vesicle recycling. To elucidate the molecular mechanism by which expression of dynamin I is tissue-specifically regulated, we previously cloned and characterized the promoter of the mouse dynamin I gene and suggested that there is a negative regulatory element in this promoter region. In the present study, we showed that YY1 binds to this negative regulatory element located at -111 to -107 by using the EMSA and supershift analyses. Cotransfection experiment using an YY1 expression vector revealed that YY1 exerts a repressive role on the dynamin I gene promoter activity. These results demonstrate that transcription factor YY1 negatively regulates dynamin I expression via binding to the negative regulatory element.

The Neuron Restrictive Silencer Factor Can Act as an Activator for Dynamin I Gene Promoter Activity in Neuronal Cells

The neuron restrictive silencer element (NRSE) has been identified in several neuronal genes and confers neuron specificity by silencing transcription in nonneuronal cells. We have previously reported that Sp1 and an NF-kappaB-like element (NE-1) are required for the promoter activity of mouse dynamin I gene. In the present study, we found that the upstream regulatory region of the dynamin I promoter has an NRSE-like sequence and showed that neuron restrictive silencer factor (NRSF) binds to this element in neuronal cells as well as in nonneuronal cells. We also showed that NRSF activates the promoter activity of dynamin I gene in neuronal cells. From the results in this study, we suggest that NRSE might be involved in the neuron restriction of dynamin I expression, and NRSF could act as an activator for promoter activity of dynamin I gene in neuronal cells.

Increased GTP-binding to dynamin II does not stimulate receptor-mediated endocytosis

Regarding the molecular mechanism of dynamin in receptor-mediated endocytosis, GTPase activity of dynamin has been thought to have a critical role in endocytic vesicle internalization. However, a recent report suggested that GTP-binding to dynamin itself activates the dynamin to recruit molecular machinery necessary for endocytosis. In this study, to investigate the role of GTP binding to dynamin II, we generated two mutant dynamin II constructs: G38V and K44E. G38V, its GTP binding site might be mainly occupied by GTP caused by reduced GTPase activity, and K44E mutant, its GTP binding site might be vacant, caused by its decreased affinity for GTP and GDP. From the analysis of the ratio of GTP vs GDP bound to dynamin, we confirmed these properties. To test the effect of these mutant dynamins on endocytosis, we performed flow cytometry and confocal immunofluorescence analysis and found that these two mutants have inhibitory effect on transferrin-induced endocytosis. Whereas fluorescent transferrin was completely internalized in wild-type (WT) dynamin II expressing cells, no intracellular accumulation of fluorescent transferrin was found in the cells overexpressing K44E and G38V mutant. Interestingly, the amount of GTP bound to K44E was increased when endocytosis was induced than that bound to WT. The present results suggested that the GTPase activity of dynamin II is required for formation of endocytic vesicle and GTP-binding to dynamin II per se is not sufficient for stimulating endocytosis.

Characterization of the mouse dynamin I gene promoter and identification of sequences that direct expression in neuronal cells

Dynamin I is expressed at high levels in brain and its expression is regulated during the developmental stages of brain. To elucidate the molecular mechanism by which the expression is tissue-specifically regulated, we cloned the 5'-flanking region of the mouse dynamin I gene and determined the nucleotide sequence of 1036 bases upstream from the translation start site. Transient transfection studies with a chloramphenicol acetyltransferase reporter gene in neuroblastoma NS20Y and Lewis lung cells demonstrated that the 5'-flanking region has a cell-type-specific promoter activity. Deletion analyses demonstrated that the minimal promoter activity was detected in the proximal region 195 bp upstream of the translation initiation codon (-90 to +105). The minimal promoter was embedded in a GC-rich region (75% GC content), in which an Sp1-binding motif and a nuclear factor (NF)-kappa B-like element (NE-1) were found, but it lacked TATA and CAAT boxes. Mutational analysis and electrophoretic mobility-shift assay analysis revealed that Sp1 binds to the Sp1 site and that this element is critical for the promoter activity of the dynamin I gene. We found that the NE-1 sequence is required for the expression of the dynamin I gene but NEBP (NE-1-binding protein), which binds to the NE-1 sequence, is not NF-kappa B. We also found that one base in the NE-1 sequence (the underlined G residue in GGGATTCGCGGA) is critical for binding specificity to discriminate between NEBP and NF-kappa B. By UV cross-linking analysis, we found that NEBP is an approx. 104 kDa nuclear protein.

Effects of green tea tannin on cisplatin-induced nephropathy in LLC-PK1 cells and rats

A study was conducted to clarify whether green tea tannin ameliorated cisplatin-induced renal injury in terms of lactate dehydrogenase and malondialdehyde leakage from a renal epithelial cell line, swine-derived LLC-PK1 cells in culture. Green tea tannin was shown to suppress the cytotoxicity of cisplatin, the suppressive effect increasing with the dose of green tea tannin. The effect of cisplatin was then investigated in rats given green tea tannin for 40 days before cisplatin administration and in control rats given no green tea tannin. In control rats, blood, urinary and renal parameters and the activities of antioxidative enzymes in renal tissue deviated from the normal range, indicating dysfunction of the kidneys. In contrast, rats given green tea tannin showed decreased blood levels of urea nitrogen and creatinine, and decreased urinary levels of protein and glucose, reflecting less damage to the kidney. In this group, the activity of catalase in the renal tissue was increased, while the level of malondialdehyde was decreased, suggesting the involvement of radicals in the normalizing of kidney function. Based on the evidence available it appeared that green tea tannin eliminated oxidative stress and was beneficial to renal function.

Fractal dimension calculated from two types of region of interest

OBJECTIVES

To compare the effect of using two region of interest (ROI) types on calculating the fractal dimensions of trabecular bone during simulated osteoporosis.

METHODS

Ten 5 mm thick cross-sections from the long bone of a cow were progressively decalcified in 0.1 N Hcl for 5, 10, 20, 30, 60 and 90 min intervals, and radiographed using 0 degrees projection angle in a specially designed device. Two types of ROI (the ruggedness of the boundary and bone profiles) were placed on each digital image. Fractal dimensions and variance in mean pixel intensity were computed from each ROI using the caliper method in ImageFractal (National Institutes of Health, Washington, DC, USA). Correlation analysis quantified the relationship between changes in variance and fractal dimensions of the two types of ROI.

RESULTS

A Strong correlation (r=0.90 approximately 0.98, P</=0.0026) was found between variance in mean pixel intensity and decreasing fractal dimensions calculated from bone profiles. There was no consistency in the ruggedness of the boundary and increasing decalcification.

CONCLUSIONS

The fractal dimensions used to characterize the ruggedness of a boundary of trabecular bone in a two-dimensional ROI are inadequate for the detection of osteoporosis, but those calculated from bone profiles may be a sensitive descriptor of trabecular bone structure.

Atom trap in an axicon mirror

We have realized a novel atom trap in an axicon (conical hollow) mirror, using a frequency-modulated, single-diode laser. Different spatial distributions of trapped atoms such as a ball and a ring are observed. We show that our numerical simulations are consistent with experimental results. In particular, the ring diameter is found to be approximately the separation between the mirror axis and the magnetic field axis. The axicon trap may be useful as a precooled atom source for cold atomic beams, atom funnels, and atom waveguides.

Single-beam atom trap in a pyramidal and conical hollow mirror

We present a novel and simple magneto-optical trap in pyramidal and in conical hollow mirrors, using a single beam. A diode laser having modulation sidebands at microwaves is used for cooling, trapping, and repumping of rubidium atoms in a vapor cell. When the laser is circularly polarized and sent into the hollow region, three pairs of counterpropagating beams are automatically produced therein that have the same polarization configuration as that of a conventional six-beam magneto-optical trap. The fluorescence by the trapped atoms and its mirror image are observed simultaneously. This system may be useful for atom-manipulation applications such as gravitational atom traps and atom waveguides.

Cellular factors binding to a novel cis-acting element mediate steroid hormone responsiveness of mouse mammary tumor virus promoter

Steroid hormone receptors regulate mouse mammary tumor virus (MMTV) gene expression by binding to hormone response DNA elements present in the long terminal repeat. Tissue-specific expression of MMTV is unlikely to be regulated by steroid hormone-receptor complex alone, and mammary cell-specific factors might play a role in the hormone-induced transcriptional activation. In this report we have investigated the function of a novel cis-acting element designated Kil (-204 to -188) which is located adjacent to the distal glucocorticoid response element, in steroid hormone-induced transcription of MMTV. Electrophoretic mobility shift assays indicate that cellular factors bind to the Kil element, and dexamethasone stimulation results in alterations in the binding pattern of proteins in this region. By transient transfection assays using wild type and deletion mutants of the Kil element, we show that this novel cis-acting element is necessary for hormone-induced transcription of MMTV and functions in mammary tumor cells but not in NIH/3T3 cells. Mutagenesis of the Kil sequence suggests that the entire Kil element functioning as one unit is necessary for hormone-induced transcription of MMTV. When placed in the context of heterologous promoters, neither Kil element nor glucocorticoid response element is able to induce significant hormone-induced transcription of MMTV. The presence of both the DNA elements in tandem results in optimal induction of transcription in the presence of steroid hormones. Our results also indicate that the Kil element functions in human breast carcinoma cell lines such as T47D and MCF-7. These results suggest that Kil element in combination with distal glucocorticoid response element functions as a mammary cell-specific enhancer to regulate MMTV transcription.

The crystal structure and absolute configuration of the antitumor platinum complex trans(OH)-Pt(OH)2(malonato)(1R,2R-cyclohexanediamine)

The absolute configuration of the anti-tumor complex trans(OH)-Pt(OH)2(malonato)(1R,2R-cyclohexanediamine) was determined by X-ray anomalous scattering technique. The final unit cell was monoclinic, space group P2(1) with a = 9.142 A, b = 7.788 A, c = 11.946 A, beta = 96.48 degrees, Z = 2. The crystal structure was determined by direct method and difference Fourier synthesis, and refined to R = 0.025 and Rw = 0.033 based on 2768 independent reflections. The platinum atom has roughly octahedral coordination. The cyclohexane ring has the expected chair configuration, with two amino groups in equatorial positions while the malonato ligand, in contrast, shows a boat conformation for six membered Pt O-C-C-C-O ring.

The relationship of suicide rates to sociodemographic factors in Canadian census divisions

The correlates of suicide rates were determined by conducting a multivariate study of sociodemographic indicators and suicide rates of 261 Canadian census divisions. Twenty-one sociodemographic variables were entered into a stepwise multiple linear regression to develop a model for suicide rates. The important variables were mortality rate for all causes of death, the age of the population, average family income, population density, proportion with no religious affiliation, proportion of Francophones, unemployment, immigration, proportion of Native people, a regional effect for British Columbia and the north, and growth by mobility, explaining 62% of the observed variation. This spatial ecologic analysis highlights the importance of cultural differences in explaining the variation of suicide rates. The analysis supports the previously found negative relationship between income and suicide while contrasting from previous studies in determining a inverse relationship with unemployment and an inverse relationship with the age distribution.