A randomized clinical study to assess the performance of a marketed denture adhesive in a model of food infiltration in healthy, edentulous adults

OBJECTIVES

An optimized food infiltration methodology was utilized to assess the objective and subjective efficacy of a marketed denture adhesive regarding denture dislodgment and infiltration and perception of food particles under maxillary and mandibular dentures. A pilot study helped optimize methodologies before the efficacy study.

MATERIALS AND METHODS

Participants were healthy adults (n =48 for both studies) with fair- to well-fitting and well-made full maxillary and mandibular dentures. In the pilot, groups were a denture adhesive applied in a conventional dabbed-on pattern, a denture adhesive applied in continuous strips, or no adhesive. In the efficacy study, groups were the Test denture adhesive (continuous strips pattern application) or no adhesive, employed in a crossover design. Food infiltration was investigated through measurement of peanut particle mass retrieved from under each denture (30-32 g chewed). No formal statistical testing was performed in the pilot. Statistical analysis in the efficacy study was performed using analysis of variance. Primary efficacy evaluation was combined peanut particle mass from both dentures. Secondary efficacy evaluations included peanut particle mass under separate dentures, participant-reported denture dislodgements, and awareness/rates of how bothersome peanut particles under dentures were.

RESULTS

In the pilot, the median peanut particle mass was lower with either pattern application compared with no adhesive. In the efficacy study, peanut particle mass under combined dentures was lower with than without adhesive (geometric mean [product of values]: 5.56 vs. 29.13 mg) with a between-group geometric mean ratio (adhesive over no adhesive) of 0.19 (95% confidence interval: 0.12, 0.30) favoring the Test adhesive (p < .0001). Similar Test adhesive beneficial outcomes in both studies included significantly fewer denture dislodgements and awareness and how bothersome peanut particles under dentures were. Treatments were generally well-tolerated.

CONCLUSIONS

These findings, including reduced peanut particle infiltration, fewer denture dislodgments, and lower ratings of bothersomeness, corroborate those studies investigating the benefits of denture adhesive in preventing food infiltration.

Changes in the Surface Texture of Thermoplastic (Monomer-Free) Dental Materials Due to Some Minor Alterations in the Laboratory Protocol-Preliminary Study

Contemporary thermoplastic monomer-free prosthetic materials are widely used nowadays, and there are a great variety available on the market. These materials are of interest in terms of the improvement of the quality features of the removable dentures. The aim of this study is to establish how minimal changes in the laboratory protocol of polyamide prosthetic base materials influence the surface texture. Two polyamide materials intended for the fabrication of removable dentures bases were used-Perflex Biosens (BS) and VertexTM ThermoSens (TS). A total number of 20 coin-shaped samples were prepared. They were injected under two different modes-regular, as provided by the manufacturer, and modified, proposed by the authors of this study. Scanning electronic microscopy (SEM) under four magnifications-×1000, ×3000, ×5000, and ×10,000-was conducted. With minimal alterations to the melting temperature (5 °C) and the pressure (0.5 Bar), in Biosens, no changes in terms of surface improvement were found, whereas in ThermoSens, the surface roughness of the material significantly changed in terms of roughness reduction. By modifying the technological mode during injection molding, a smoother surface was achieved in one of the studied materials.

Influence of Filler Metal on Electrochemical Characteristics of a Laser-Welded CoCrMoW Alloy Used in Prosthodontics

This paper sought to determine corrosion resistance changes in the artificial saliva of a CoCrMoW-based alloy used for dental prostheses under Nd:YAG laser welding with CoCr alloy and stainless steel wire filler metals. The paper presents the corrosion characteristics of such joints, including the next stage of porcelain-fused-to-metal (PFM) firing. Corrosion tests were performed by electrochemical methods registering anodic polarization curves and electrochemical impedance spectroscopy (EIS). The microstructures were assessed by scanning microscopy (SEM) and chemical composition analysis (EDS) at the connection and heat-affected zones. Welding CoCrMoW alloy with and without a filler material increased the open circuit potential of the samples by 40-100 mV compared to unwelded base alloy. At the same time, a potentiodynamic test showed a polarization resistance R_pol reduction in welded samples, both for CoCr and stainless steel wires, as compared to the base CoCrMoW material. On the other hand, when comparing the current density and polarization resistance between materials welded with two different filler metals, better results were obtained for samples welded with stainless steel wire. The polarization resistance R_pol for the base alloy was 402 kΩ·cm², for the CoCr wire weld it was 436 kΩ·cm², and the value was 452 kΩ·cm² for stainless steel wire welds. Comparing polarization resistance R_pol from the Tafel analysis and the total charge transfer resistance from Rp_(EIS) from EIS, the CoCrMoW alloy welded with a stainless steel wire after heat treatment equaled or even slightly exceeded the corrosion resistance of the base alloy and alloy welded with dedicated CoCr wire after heat treatment. These results indicated the possibility of using stainless steel wire for the laser welding of CoCrMoW alloys dental prostheses, including the next stage of PFM, without sacrificing the corrosion resistance of such connections, and this was confirmed by most electrochemical parameters.

Effect of different mouthwashes on the shear bond strength and surface roughness of intraoral and heat-cured soft liners

Background

The present study aimed to determine the effect of mouthwashes on the shear bond strength (SBS) and surface roughness (SR) of soft liners.

Materials and Methods

In this in vitro study, a total of 72 samples were prepared to evaluate the SBS (n = 36 for each liner). An autopolymerized (Mollosil Plus) and a heat-polymerized liner (Molloplast B) were injected in between two blocks of heat-processed acrylic resin (Triplex). The samples in each liner group were subdivided into three subgroups. Control group samples were totally stored in distilled water. In test groups, samples were immersed in chlorhexidine (CHX) or mouthwash containing ginger extract for 30 min daily. After 20 days, the SBSs were evaluated using a universal testing machine. To evaluate the SR, 30 disk-shaped samples (15mm*10mm) were prepared for each type of liners and stored in the similar solutions; distilled water, CHX and ginger mouthwash (n=10). SR was measured at 1 day and after 90 days with a profilometer. One-way ANOVA, independent t-test, and paired t-test were used to analyze data. P < 0.05 was considered statistically significant.

Results

The SBS in Molloplast B liner was significantly higher than Mollosil regardless of type of solution (P < 0.001). In both liners, the mean SBS was not statistically different between the three groups of solutions. Changes in SR were not statistically significant after 90 days, except for the Mollosil group, immersed in ginger extract solution which was increased (P = 0.04).

Conclusion

SBS of either group of liners did not change in both mouthwashes; However, SBS of heat-polymerized liner was higher than autopolymerized in all groups. Ginger extract-containing mouthwash increased SR of autopolymerized liner used in this study; whereas, there were no significant changes in the heat-cured liner. According to this study, CHX can be used for the disinfection of prosthesis lined with either type of liners.

Eating Advice for People Who Wear Dentures: A Scoping Review

OBJECTIVE

A scoping review of available advice to address eating problems experienced by people who wear dentures was conducted in accordance with the PRISMA statement. The objective was to identify and map type, volume, and content of the available eating advice.

METHODS

Medline, CINAHL, and grey literature databases and Google were searched. Relevant content pertaining to study type, peer-review vs. grey literature, country of origin, advice content, and methods to evaluate effectiveness was mapped.

RESULTS

Of the 4591 records identified from peer-reviewed literature, 56 full papers underwent duplicate screening, resulting in 26 papers (from Germany (n = 1), Europe (n = 1), India (n = 2), Japan (n = 7), UK (n = 6), USA (n = 6), or other (n = 3)) being included in the review. These yielded 18 different items of relevant eating advice. Of the 258 screened websites, 63 were included, yielding 30 different items of eating advice. The most-cited advice was to eat soft food and avoid hard and sticky food, cut food into bite-sized pieces, and chew on both sides of the mouth and chew slowly and thoroughly. The identified advice was not supported by reference to peer-reviewed evidence. Advice included some conflicting messages and some advice was non-compliant with authoritative nutritional advice (e.g., avoid red meat, take a vitamin supplement).

CONCLUSION

There is support for providing eating advice at the time of denture provision. A broad range of advice based on clinical experience to support people who wear dentures to overcome the functional limitations exists. However, the efficacy of this advice in improving diet and eating experience has not been tested.

Effect of Candida albicans Suspension on the Mechanical Properties of Denture Base Acrylic Resin

Yeast-like fungi such as Candida albicans (C. albicans) are the primary pathogenic microorganism in the oral cavity of denture wearers. The research available so far, conducted according to a protocol based on the exposure of specimens to a C. albicans suspension and their cutting with water cooling, shows that hard polymethyl methacrylate (PMMA) prosthetic materials are not only surface colonized, but also penetrated by microorganisms in a short time. This justifies the hypothesis that exposure to a suspension of the C. albicans strain causes the changes in mechanical properties due to surface colonization and/or penetration of the samples. In the current study, the chosen mechanical properties (flexural strength, flexural modulus, tensile strength, impact strength, ball indentation hardness, and surface Vickers hardness at 300 g load) of the PMMA denture base material Vertex RS (Vertex-Dental, The Netherlands) exposed for 30, 60, and 90 days to a suspension of C. albicans were investigated. The potential penetration of yeast was examined on the fractured surfaces (interior of specimens) to eliminate the risk of the contamination of samples during cutting. There was no influence on the flexural strength, flexural modulus, tensile strength, impact strength, or ball indentation hardness, but a significant decrease in surface hardness was registered. Microscopic observations did not confirm the penetration of C. albicans. On the surface, blastospores and pseudohyphae were observed in crystallized structures and in traces after grinding, which indicates that in clinical conditions, it is not penetration but the deterioration of surface quality, which may lead to the formation of microareas that are difficult to disinfect, causing rapid recolonization.

Difference of income inequalities of denture use by co-payment rates: A JAGES cross-sectional study

OBJECTIVES

Studies suggest that wearing dentures to restore missing teeth can have a positive impact on health status. However, income inequalities in denture wearing exist. The aim of this study was to investigate how differing co-payment rates under the current Japanese Universal Health Insurance Coverage System affect income inequalities in denture non-use among older adults with severe tooth loss.

METHODS

This cross-sectional study used data from the 2019 Japan Gerontological Evaluation Study (JAGES). Self-administered questionnaires were mailed to 345 356 independent people who did not receive long-term care insurance benefits and were aged ≥65 years. The dependent variable was denture non-use, and the independent variable was the equivalent annual household income. The Slope Index of Inequality (SII) and Relative Index of Inequality (RII) were used with regression-based approaches to determine both absolute and relative inequalities in denture non-use by co-payment rates. The covariates were sex, age, years of education, number of teeth and comorbidities.

RESULTS

Of the 240 889 responses received (response rate =69.9%), we analysed 21 594 participants who fulfilled the inclusion criteria. The mean age was 72.8 years (standard deviation =4.1), and 57.6% were men. For 30 per cent, 20 per cent and 10 per cent co-payment rates, the percentages of people who did not use dentures and had severe tooth loss (≤9 teeth) were 18.3%, 13.3%, and 8.5%, respectively. All analyses confirmed significant inequalities in denture non-use. The lower the co-payment rate, the smaller the inequalities. SIIs for each co-payment rate were as follows: 30 per cent =13.35% (95% confidence interval [CI] = 9.61-17.09); 20 per cent =7.85% (95% CI = 4.88-10.81); and 10 per cent =4.85% (95% CI = 2.55-7.16). Inclusion of interaction term between income and co-payment rate significantly lowered the inequalities by co-payment rate in logistic regression analysis and SII. For RII, although the interaction was not statistically significant, a similar trend was observed.

CONCLUSIONS

Income inequalities in denture use existed among older adults with severe tooth loss in Japan, and the inequalities appeared to be greater when the co-payment rate was higher.

A Denture Use Model Associated with Candida spp. in Immunocompetent Male and Female Rats

Denture stomatitis (DS) is a common infection in denture wearers, especially women. This study evaluated the induction of DS using acrylic devices attached to the palate of rats combined with inoculation of Candida spp. Immunocompetent male and female rats received a carbohydrate-rich diet. Impressions were taken from the rats’ palate to individually fabricate acrylic devices. Mono- and multispecies biofilms of C. albicans, C. glabrata, and C. tropicalis were grown on the devices, which were then cemented on posterior teeth and kept in the rats’ palate for four weeks. Microbial samples from the palate and the device were quantified. Oral microbiome of rats inoculated with C. albicans was analyzed by 16S rRNA gene sequencing. Log10(CFU/mL) were analyzed by mixed or two-way MANOVA (α = 0.05). Candida spp. and acrylic device did not induce palatal inflammation macroscopically nor microscopically. Although there was an increase (p < 0.001) of the total microbiota and female rats demonstrated higher (p = 0.007) recovery of Candida spp. from the palate, the gender differences were not biologically relevant. The microbiome results indicate an increase in inflammatory microbiota and reduction in health-associated micro-organisms. Although Candida spp. and acrylic device did not induce DS in immunocompetent rats, the shift in microbiota may precede manifestation of inflammation.

3D assessment of facial contours of patients wearing either complete denture or implant-supported fixed dentures

Background

Total edentulousness leads to soft tissue changes causing esthetic problems. Being aware of the significant effects of different treatment approaches on facial soft tissue can help to obtain more satisfying esthetic results.

Aim

The current study's objective was to evaluate three-dimensional facial soft tissue changes in edentulous patients rehabilitated with a complete denture (CD) and implant-supported fixed partial denture (FPD).

Material and Methods

Fourteen edentulous patients, mean age of 47.6 years (42-63), were assessed before prosthetic treatments (T0), after CD (T1), and after FPD (T2). 3dMDface System (3dMD LLC) obtained the images and transferred them to 3dMD Vultus software (3dMD Vultus software Version 2.3.0.2). Nine linear, five angular, and one topographical measurement were performed for facial soft tissue analysis. For statistical analysis of facial soft tissue, ANOVA was used with a level of significance set at 5% (p <.05).

Results

Significant differences were observed in lower lip height (Sto-Sl) and nasolabial angle (Prn Sn Ls) with CD. There is no significant difference with the implant-supported fixed partial dentures in these measurements when compared with pretreatment. Significant differences were observed in the lower lip angle (Chr Li Chl) with the implant-supported fixed partial dentures. There is no significant difference with CD in this measurement when compared with pretreatment. According to the paired comparisons, a significant difference was observed in philtrum height (Ls-Sn) between the treatment approaches.

Conclusion

CD and implant-supported fixed partial dentures, both treatment approaches, cause facial soft tissue changes, which may help to improve the facial esthetic. The effects of these treatment methods on facial soft tissues are not significantly different, except the philtrum height.

Effect of physical and psychological status on oral health quality of life of geriatric patients undergoing complete denture treatment

Aim

The present study was conducted to evaluate differences in Oral Health-Related Quality of Life (OHRQoL) in denture wearers based on psychological classification and patient satisfaction.

Settings and Design

A prospective study.

Materials and Methods

284 patients, aged 30 years and above who fulfilled the eligibility criteria were recruited. Participants answered the OHIP - EDENT questionnaire at the time of denture insertion and 6 months later. Psychological categorization was based on MM House classification. Patient satisfaction was graded from totally satisfied to not very satisfied.

Statistical Analysis Used

SPSS 23 version was used for analyzing descriptive and inferential statistics. ANOVA was used to find significant differences for OHRQoL based on psychological classification and patient satisfaction. Before and after intervention analysis was assessed using student 't' test.

Results

Philosophical and exacting patients had better adaptation to dentures than the hysterical and indifferent class of denture wearers. Totally satisfied and very satisfied patients with dentures had lesser mean scores as against the other categories which was significant in all domains suggesting better. Overall, OHIP - EDENT score decreased from 20.253 ± 12.466 to 17.168 ± 14.143, which were significant at P =0.043, thus showing an improvement after a 6 month follow up.

Conclusions

Psychological attitude of denture wearers must be considered by the prosthetic specialist for effective adaptation and acceptance by the edentulous patient.

In vitro performance of CAD/CAM and conventional removable dentures

AIM

Innovations in CAD/CAM technology and materials science offer new methodologies for removable prosthodontics. As clinical data are still rare, in vitro performance of both CAD/CAM and comparable conventional materials may help to estimate the clinical outcome.

MATERIALS AND METHODS

Specimens (n = 8 per group) from teeth (CediTEC, SR VivodentCAD, Vitapan), base materials (V-Print dentbase, IvoBase CAD, Paladur), adhesives (CediTEC Primer/Adhesive, IvoBase CAD Bond), and a fully printed specimen (Try-In) were created. All specimens underwent thermal cycling and mechanical loading (TCML): 1,200,000 × 50 N; 2x3000 x 5°C/55°C; H2O. Surviving specimens were loaded to fracture. Statistical tests used were the Shapiro-Wilk test and the Kaplan-Meier survival, with the level of significance set to α = 0.05.

RESULTS

Mean loading cycles until failure varied between 100 and 621,667 cycles. Up to five specimens per group failed during TCML. With one exception, all specimens of the entirely CAD/CAM-fabricated group survived TCML. The log-rank (Mantel-Cox) test showed significantly different (P = 0.000) loading cycles between the systems (chi-square test: 28,247; degree of freedom: 8). Failure of the dentures during TCML was characterized by failure of the denture base (2x), denture tooth (13x), mixed base/tooth (3x) or adhesive between base and tooth (1x).

CONCLUSION

TCML and fracture testing showed different aspects of denture tooth restoration. The results indicated no correlation between fracture force, fracture pattern, and survival cycles. Denture teeth (milled, heat-pressed), bases (milled, printed, pressed), and primer should be matched up to optimize the performance of dentures.

The Influence of Decontamination Procedures on the Surface of Two Polymeric Liners Used in Prosthodontics

Polymeric liners are materials commonly used in prosthodontics to reshape denture surfaces contacting the soft tissues of the oral cavity. The aim of the study was to determine the impact of different cleaning methods on two polymeric materials used in prosthodontics as non-adhesive permanent liners. The material for the research consisted of samples made from Mollosil Plus (Detax, Ettlingen, Germany)-direct polysiloxan liner; and Plastitanium (Pressing Dental, San Marino, Republic of San Marino)-an injection-molded liner. A total of 198 samples were made, 99 of each assessed material. They were exposed to different cleaning methods-a toothbrush, a toothbrush and soap, a toothbrush and toothpaste (BlendaMed, Procter&Gamble, Cincinnati, OH, USA), a toothpaste and denture cleaning paste (Protefix Hygiene Denture Paste, Queisser Pharma, Germany), denture cleansing tablets (Protefix Hygiene Cleaning Tablets, Queisse Pharma, Germany), and a disinfecting spray (Aftermat, Port Jefferson Station, New York City, NY, USA)-for 1 min, 5 min, 10 min, and 15 min. The image acquisition was performed with scanning electron microscopy and samples were analyzed for the homogeneity of their surfaces-the presence of holes, grooves, precipitate, and small and large separating pieces of the material marking departures from this homogeneity. For each type of damage, one point was given. Continuous data from two groups were compared with Mann-Whitney U testing. Due to a small sample size and distribution of variables other than normal, to compare more than two groups, Kruskal-Wallis testing with post hoc analysis (Dunn test with Bonferroni correction) was used. Categorical data were compared with the chi-square test and the Fisher's exact test. The Mollosil Plus material should be decontaminated with the use of a toothbrush or toothbrush with soap, while Plastitanium material should be disinfected. Plastitanium samples are more susceptible to damage during the decontamination procedures than Mollosil Plus.

Assessment of Oral Hygiene in Patients Using Fixed and Removable Dentures Treated at the University Dental Clinic in Krakow

Apart from local lesions, the presence of dental plaque may also have an effect on health, especially in people with general diseases. The aim of this project was to assess the oral hygiene of patients prosthetically treated at the Dental Prosthetics Clinic of the University Dental Clinic in Krakow (Poland) using fixed and removable dentures and to determine the demographic relationships and data related to the education of the respondents. The research material consisted of 120 patients who used fixed (group I) and removable (group II) restorations. Basic dental examinations and oral hygiene examinations were carried out with the use of the API (Approximal Plaque Index) and PI (Plaque Index) plaque indices. This study presents the percentage of respondents in terms of sex, place of residence, and education. The mean PI (Plaque Index) values were 46.73% (Group I) and 50.05% (Group II). (p = 0.4839). The mean values of API (Approximal Plaque Index) amounted to 65.14% (Group I) and 68.94% (Group II) (p = 0.4695). Patients using dentures showed insufficient oral hygiene, and the hygiene status of patients did not depend on the type of dentures used. The group that is most often treated with prosthetics is women with secondary education. The most numerous group of patients at the Dental Prosthetics Clinic are people living in large cities which results from easier access to health care.

Analysis of Changes in the Tensile Bond Strenght of Soft Relining Material with Acrylic Denture Material

Abrasions and pressure ulcers on the oral mucosa are most often caused by excessive pressure or incorrect fitting of the denture. The use of soft relining materials can eliminate pain sensations and improve patient comfort. The main functional feature of soft elastomeric materials is the ability to discharge loads from the tissues of the mucosa. (1) Background: The aim of the work was a comparative laboratory study of ten materials used for the soft lining of acrylic dentures. (2) Methods: There were materials based on acrylates (Vertex Soft, Villacryl Soft, Flexacryl Soft) and silicones (Sofreliner Tough Medium, Sofreliner Tough Medium, Ufi Gel SC, GC Reline Soft, Elite Soft Relining, Molloplast). Laboratory tests include the analysis of the tensile bond strength between the relining material and the acrylic plate of the prosthesis. The tests were conducted taking into account 90-day term aging in the distilled water environment based on the methodology presented in the European Standard ISO 10139-2. (3) Results: After three months of observation, the highest strength of the joint was characterized by Flexacryl Soft acrylic, for which the average value was 2.5 MPa. The lowest average value of 0.89 MPa was recorded for the GC Reline Soft silicone material. Over time, an increase in the value of the strength of the combination of acrylic materials and a decrease in these values in the case of silicone materials was observed. (4) Conclusion: Each of the tested silicone materials showed all three types of damage, from adhesive to mixed to cohesive. All acrylic-based materials showed an adhesive type of failure. Time did not affect the type of destruction.

Tooth loss, dental prostheses use and cognitive performance in older Brazilian adults: The SABE cohort study

AIM

To investigate the within- and between-person longitudinal effects of tooth loss and the use of dentures, clinically assessed by dentists, on cognitive decline in a representative sample of community-dwelling older Brazilian adults.

METHODS

Data came from 1265, 1112 and 1021 individuals aged ≥60 years who participated in the second (2006), third (2010) and fourth (2015) waves, respectively, of the Health, Well-being and Aging study (SABE). Cognitive performance was evaluated with the abbreviated version of the Mini-Mental State Examination (MMSE). The number of natural teeth was classified according to three categories: none, 1-19 and ≥20 teeth. The presence of removable full or partial dentures in each dental arch (yes/no) was recorded. Hybrid regression models, adjusted for sociodemographic, behavior and health-related covariates, were used to estimate the between- and within-person effects of the longitudinal association between cognitive performance and oral health.

RESULTS

Participants with 1-19 and no teeth had, respectively, 1.15 (95% CI 0.65-1.66) and 1.54 (95% CI 0.99-2.09) units lower MMSE score than those with ≥20 teeth. Denture wearers had 1.54 (95% CI 1.13-1.95) units greater MMSE score than non-denture wearers, and those who started wearing dentures during the follow up had 0.83 (95% CI 0.21-1.45) units greater MMSE score after the transition.

CONCLUSION

Our main findings showed that the use of dental prostheses might be a protective factor for cognitive decline. Geriatr Gerontol Int 2021; 21: 1093-1098.

Psychodiagnostics as a Mandatory Element of Patient Protocols in Dentistry

Objectives:

This study aims at performing psychodiagnostics of the patients` condition with removable and fixed dentures both before and after dental treatment.

Materials and Methods:

The first group included 200 patients with fixed-type dentures, and the second group consisted of 200 patients with removable dental devices. The control group included 200 patients with healthy teeth. All patients were subjected to Fere’s skin-galvanic reaction procedure. Patients also filled out the Dental Status Questionnaire and were then tested following the Spielberger-Hanin Scale. For a comparison of differences, a two-sample t-test for independent samples was used. The Pearson correlation between features was calculated considering their distribution as normal.

Results:

In the control group, the hemispheric activity index increased 1.1 times after treatment. In Group 2, following the dental status questionnaire, the index of hemispheric activity increased 1.3 times in males with a positive emotional mood (P ≤ 0.01). A 2.2-fold and 2.1-fold (P ≤ 0.01) increase was observed among female and male patients with a negative emotional mood in Group 2, respectively. After the treatment, the hemispheric activity index in Group 1 increased by 1.1 times for males with a positive mood (P ≤ 0.01) and by 1.2 times for male and female patients with a negative mood (P ≤ 0.05). Direct correlation was recorded between the increase in the number of scores and emotional mood among males and females from Group 1 (0.72 and 0.73, respectively). After the survey, a correlation was established between the values of the hemispheric activity index and the increase in scores among males (0.82) and females (0.81). There was also a connection between the increase in scores and the level of personal anxiety in both male (0.57) and female (0.66) patients, as well as between the increase in scores and the level of reactive anxiety (0.56 and 0.57, respectively).

Conclusions:

Changes in the hemispheric activity index were shown to be related to the patient’s dental condition questionnaire. Besides, there is a relationship with the type of dental service. The practical application of this study implies that more reliable information about the patient’s satisfaction with the quality of dental care provided can be obtained using not only standard psychodiagnostic methods but also questionnaires on the patient’s dental status. Once the survey is completed and the data obtained analyzed, it is possible to define the correct strategy to restore the patient’s physical and mental health after dental treatment.

Antiadhesive Properties of Imidazolium Ionic Liquids Based on (-)-Menthol Against Candida spp

Infections with Candida spp. are commonly found in long-time denture wearers, and when under immunosuppression can lead to stomatitis. Imidazolium ionic liquids with an alkyl or alkyloxymethyl chain and a natural (1R,2S,5R)-(-)-menthol substituent possess high antifungal and antiadhesive properties towards C. albicans, C. parapsilosis, C. glabrata and C. krusei. We tested three compounds and found they disturbed fungal plasma membranes, with no significant hemolytic properties. In the smallest hemolytic concentrations, all compounds inhibited C. albicans biofilm formation on acrylic, and partially on porcelain and alloy dentures. Biofilm eradication may result from hyphae inhibition (for alkyl derivatives) or cell wall lysis and reduction of adhesins level (for alkyloxymethyl derivative). Thus, we propose the compounds presented herein as potential anti-fungal denture cleaners or denture fixatives, especially due to their low toxicity towards mammalian erythrocytes after short-term exposure.

Factors Affecting Masticatory Satisfaction in Patients with Removable Partial Dentures

(1) Background: The degree of satisfaction with dental treatment varies among patients, and the discrepancy may exist between the patient's subjective evaluation and the objective assessment. Further, the optimal methods for increasing patient satisfaction with mastication remain unclear. This study aimed to identify factors affecting masticatory satisfaction in patients with removable partial dentures. (2) Methods: A total of 132 participants (71.0 ± 9.0 years) were included. Masticatory satisfaction was assessed on a visual analog scale. An oral health survey was conducted to assess the number of functional teeth, missing tooth classification: Kennedy classification, occlusal support: Eichner classification, and removable partial dentures wearing jaw. Objective masticatory performance was assessed using gummy jelly, while subjective masticatory ability was assessed using food acceptance status and oral health-related quality of life. The associations of these factors with masticatory satisfaction were assessed. (3) Results: Masticatory satisfaction among removable partial denture wearers was not significantly associated with gender, age, denture wearing jaw, Kennedy classification, and occlusal support. The degree of masticatory satisfaction was significantly greater with higher levels of masticatory function: masticatory performance, food acceptance score, and OHIP-14 score. The OHIP-14 score was the only significant explanatory variable for masticatory satisfaction in the multiple regression analysis; the strongest associations were with the "psychological discomfort" and "physical disability" subscales (p = 0.02 and p = 0.005, respectively). (4) Conclusions: Masticatory satisfaction among removable partial denture wearers was strongly associated with oral health-related quality of life, in which the ability to eat meals comfortably with removable partial dentures is the most important determinant of masticatory satisfaction.

Clinical presentation, diagnosis and management of aerodigestive tract foreign bodies in the adult population: Part 1

In the adult population, foreign bodies may be accidentally or intentionally ingested or even inserted into a body cavity. The majority of accidentally ingested foreign bodies pass through the alimentary tract without any complications and rarely require intervention. Accidentally ingested foreign bodies are usually fish bones, bones of other animals, and dentures. Oesophageal food impaction is the commonest cause of oesophageal foreign bodies in the Western hemisphere. Intentionally ingested foreign bodies may be organic or inorganic, and often require intervention; these patients have either underlying psychological or mental disease or are involved in illegal activities such as body packing, which involves trafficking narcotics. Imaging plays a crucial role in not only identifying the type, number and location of the foreign body but also in excluding any complications. In this comprehensive pictorial review, we provide an overview of the spectrum of foreign bodies ingested in adults, emphasising the role of various imaging modalities, their limitations and common foreign body mimickers on imaging.

Medical Device Regulation: Requirements for Dental Professionals Who Prescribe and Manufacture Custom-Made Devices

A custom-made device (CMD) is a medical device intended for the sole use of a particular patient. In a dental setting, CMDs include prosthodontic devices, orthodontic appliances, bruxism splints, speech prostheses and devices for the treatment of obstructive sleep apnoea, trauma prevention and orthognathic surgery facilitation (arch bars and interocclusal wafers). Since 1993, the production and provision of CMDs have been subject to European Union (EU) Directive 93/42/EEC (Medical Device Directive, MDD) given effect in the UK by The Medical Devices Regulations 2002 (Statutory Instrument 2002/618), and its subsequent amendments. Regulation (EU) 2017/745 (Medical Device Regulation, EU MDR) replaces the MDD and the other EU Directive pertaining to Medical Devices, Council Directive 90/385/EEC (Active Implantable Medical Device Directive, AIMDD). The EU MDR was published on 5 April 2017, came into force on 25 May 2017 and, following a three-year transition period was due to be fully implemented and repeal the MDD on 26 May 2020, but was deferred until 26 May 2021 due to the coronavirus disease 2019 (COVID-19) pandemic.In the UK, in preparation for the country's planned departure from the EU, the EU MDR, with necessary amendments, was transposed into UK law (Medical Devices (Amendment etc.) (EU Exit) Regulations 2019, UK MDR). The UK left the Union on 31 January 2020 and entered a transition period that ended on 31 December 2020, meaning that, from 1 January 2021, dental professionals in Great Britain who prescribe and manufacture CMDs are mandated to do so in accordance with the new legislation while Northern Ireland remains in line with the EU legislation and implementation date. This paper sets out the requirements that relate to the production and provision of CMDs in a UK dental setting.

Can masticatory performance be predicted by using food acceptance questionnaire in elderly patients with removable dentures?

BACKGROUND

Although a food acceptance questionnaire is useful for subjective masticatory function assessments, its characteristics and limitations when applied to patients with removable dentures have been unclear. We therefore assessed the relationship between the subjective and objective masticatory function and explored whether or not a decreased masticatory function could be evaluated by food acceptance questionnaire.

METHODS

One hundred and nineteen patients >60 years old with removable partial and/or complete dentures participated. Food acceptance score (FAS) was calculated by using Sato's questionnaire with 20 food items. Masticatory performance (MP) was assessed by a visual scoring method using a test gummy jelly (UHA Mikakuto). Simple/multiple regression analyses were performed to explain the objective masticatory function. The cut-off value of FAS was determined to predict a decreased masticatory function by sensitivity, specificity and receiver operating characteristics curve.

RESULTS

No significant gender differences in MP or FAS were noted. Although both MP and FAS increased with the number of functional teeth, FAS was not significantly affected by age. The number of functional teeth, FAS and age had significant correlations with MP, with the number of functional teeth showing the strongest correlation. Multiple linear regression analyses identified the FAS as a significant explanatory variable for MP, and 70 was the optimal cut-off value for detecting a decreased masticatory function (MP score ≤ 2) in the diagnosis of 'oral hypofunction'.

CONCLUSIONS

Using FAS to assess the MP was deemed appropriate, and a score of 70 was the optimal cut-off value for detecting a decreased masticatory function.

Relationship between taste perception and use of upper complete dentures

AIMS

The aim of the present study was to evaluate the taste perception in patients with upper complete dentures.

METHODS AND RESULTS

One hundred seventy male and female patients (45-83 years old) upper denture wearers were evaluated for their gustatory function by the paper strips technique in relation to the four basic tastes. The taste test was performed with and without the presence of the denture on the palate. Through Shapiro-Wilk and Kolmogorov-Smirnov tests, the results were analyzed by their normal distribution. The t-test for paired samples was used to evaluate if there was a statistical difference on the taste perception and itself revealed that there is a significant difference (p < 0.01) when the taste perception was analyzed for the absence and presence of the prosthesis (alone and compared) (p < 0.01). The results revealed that patients with dentures had great difficulty to recognize the bitter taste, followed by the salty, sweet, and sour.

CONCLUSION

The presence of the denture was able to modify the perception of taste when compared to its absence, especially for the bitter taste.

Effect of Denture Base Fabrication Technique on Candida albicans Adhesion In Vitro

Denture stomatitis is a common manifestation of oral candidiasis affecting some 65% of denture wearers. This condition is initiated by the adherence of Candida albicans to denture base acrylic resin. The present study aimed to test the in vitro effect of traditional and novel fabrication methods on Candida albicans adhesion to denture base samples. Denture based acrylic discs were fabricated using: (i) computerized milling, (ii) 3D printing, (iii) heat curing, and (iv) cold curing. Discs were tested for surface roughness (Ra), hydrophobicity (contact angle), mucin adsorption (Bradford assay), and Candida albicans adhesion. 3D printing significantly increased microbial cell adhesion as compared with heat curing, and computerized milling significantly decreased it. These results were associated with mucin adsorption levels rather than surface roughness. Results suggest that 3D printing may increase the risk for developing denture stomatitis, whereas computerized milling may decrease it as compared with traditional heat curing denture base fabrication.

Association between dental factors and mortality

AIM

To study whether oral parameters such as endodontic infections, root canal fillings, number of teeth or wearing removable dentures at baseline are associated with cardiovascular- and all-cause mortality in a follow-up of approximately 8 years.

METHODOLOGY

The Finnish Parogene cohort consists of 508 Finnish adults (mean age 63.3 years, SD 9.1) with cardiac symptoms, all of whom had undergone coronary angiography for accurate baseline coronary status. Extensive clinical and radiographic oral examinations were performed, and additional data were acquired from medical records and questionnaires. Root canal fillings and endodontic lesions, as well as their co-occurrence, were determined from panoramic radiographs. The mortality data were assessed via record linkage with the Finnish Causes of Death register (mean follow-up time 7.81 years, SD 1.45 years). A total of n = 471 dentate patients were included in the statistical analyses.

RESULTS

A total of n = 69 deaths were recorded, of which n = 41 were due to cardiovascular diseases (CVDs, ICD-10 I00-I99). The deceased had fewer root canal fillings (mean 1.57; SD 1.64 vs. mean 2.30; SD 2.34, P = 0.03) than the survivors. The number of missing teeth was associated with smoking, occluded coronary arteries and diabetes. Cox regression with Firth's penalized maximum-likelihood method using age as timescale revealed an inverse association (HR; 95%CI) between mortality and number of teeth (all-cause 0.91; 0.86-0.96, CVD mortality 0.89; 0.83-0.96), use of removable dentures (all-cause 0.24; 0.09-0.62, CVD mortality 0.20; 0.06-0.72), root canal fillings (all-cause 0.82; 0.70-0.94, CVD mortality 0.79; 0.63-0.96) and having root canal fillings in all teeth with apical rarefactions (all-cause 0.27; 0.06-0.79, CVD mortality 0.09; 0.01-0.63), when gender, smoking, occluded coronary arteries, periodontal inflammatory burden index and the number of teeth were adjusted for.

CONCLUSIONS

The number of missing teeth appeared to be the strongest predictor of mortality in this study, whereas endodontic infections per se had no independent association. Nevertheless, signs of professional intervention in these problems, such as root canal fillings and removable dentures, appeared to be associated with improved survival, which might partly be explained by the utilization of healthcare services.

Chewing Discomfort According to Dental Prosthesis Type in 12,802 Adults: A Cross-Sectional Study

This study examined the prevalence of self-perceived chewing discomfort depending on the type of dental prosthesis used in South Korean adults. The subjects were 12,802 people over 20 years of age who participated in a health interview and dental examination. Chewing discomfort was examined using a self-assessed report with a structured questionnaire. Using multivariable logistic regression analysis, adjusted odds ratios were evaluated along with their 95% confidence intervals (α = 0.05). After adjusting for covariates, including age, gender, smoking, drinking, hypertension, diabetes, body mass index, education, income, and toothbrushing frequency, the odds ratios (95% confidence intervals) for chewing discomfort in groups without a dental prosthesis, with fixed dental prostheses, with removable partial dentures, and with removable complete dentures were 1 (reference), 1.363 (1.213-1.532), 2.275 (1.879-2.753), and 2.483 (1.929-3.197), respectively. The association between the prevalence of chewing discomfort and the type of dental prosthesis used was statistically significant even after adjusting for various confounders (p < 0.0001). The type of dental prosthesis was related to chewing discomfort among South Korean adults.