[Biocompatibility of extracellular matrix hydrogel with human iPSCs differentiated cardiomyocytes]

Objective: To observe the biocompatibility of porcine omental derived extracellular matrix (ECM) hydrogel with human induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs) and the feasibility of ECM hydrogel as a delivery vector of cell transplantation. Methods: A series of chemical, physical and enzymatic methods were applied to acellularize the porcine omentum. Subsequently, the extracted ECM was prepared into thermosensitive hydrogel. The biochemical composition of the hydrogel was identified by histological staining. The microstructure was observed by scanning electron microscopy. The hydrogel was then injected into the myocardium of mice to observe its in situ gelation ability. Differentiation of human induced pluripotent stem cells into cardiomyocytes was achieved by small molecule induction, and then the obtained hiPSC-CMs were cultured. hiPSC-CMs cultured onto the prepared hydrogel were defined as the hydrogel group, while conventionally cultured hiPSC-CMs were defined as the control group. Cardiomyocyte viability and growth patterns were detected using live/dead staining, CCK-8 and phalloidin staining. Immunofluorescence staining and Western blot of cardiomyocytes were used to determine the survival and phenotypic maintenance markers of cardiomyocytes in materials. Results: The results of HE staining, oil red O staining and DAPI fluorescence staining showed that there was no significant cell debris, nucleus and lipid residue in the prepared ECM hydrogel. The Sirius red staining and Alcian blue staining showed that the hydrogel retained collagen and glycolaminoglycan, which were the main components of ECM. The prepared hydrogel behaves as a viscous liquid at 4 ℃ and as a gel state at 37 ℃. Scanning electron microscope results showed that the microstructure of the hydrogel was composed of irregular fibers and pores of different sizes. Under the guidance of ultrasound, the prepared ECM hydrogel could be successfully injected into the myocardium of mice. Immediately after the injection, the hyperechoic signal could be observed under ultrasound, suggesting that the hydrogel remained in the myocardium. HE staining of myocardial tissue evidenced that there was lump of gel in the injection area. The differentiated hiPSC-CMs were co-cultured with the prepared ECM hydrogel, and the results of live/dead staining showed that most of the hiPSC-CMs in the hydrogel group and the control group were alive, dead cells were scanty. The results of CCK-8 test showed that the absorbance values of the two groups were similar (P>0.05). The results of phalloidin staining showed that hiPSC-CMs could extend normally when co-cultured with ECM hydrogel. The cell morphology of the hydrogel group was similar with that of the control group, and there was no statistically significant difference in the F-actin coverage area per cell between the two groups (P>0.05). Immunofluorescence staining of cardiomyocyte markers showed that there was no significant difference in the coverage area of α-actinin and connexin-43 (Cx-43) per field between the hydrogel group and the control group (both P>0.05), the quantitative results of DAPI staining showed that there was no statistically significant difference in the number of cells between the two groups (P>0.05). Meanwhile, the results of Western blot showed that the expression levels of α-actinin and Cx-43 in cardiomyocytes in the hydrogel group were similar as those in the control group (both P>0.05). Conclusions: These results show that preparation of the ECM hydrogel from porcine omentum is successful. The hydrogel has good biocompatibility and no obvious cytotoxicity. Besides, the hydrogel can support the survival of hiPSC-CMs in vitro and maintain its phenotype. These properties make it a promising injectable cardiac tissue engineering material.

[Application of transcriptome sequencing and fusion genes analysis in the diagnosis of myeloid leukemia with normal karyotype]

Objective: To analyze the possible fusion genes with high-throughput transcriptome sequencing in myeloid leukemia patients with normal karyotype. Methods: From May 2017 to January 2019, three cases of myeloid leukemia patients with normal karyotype and negative for common fusion genes from the First Affiliated Hospital of Nanchang University were selected as the research objects. The transcriptome sequencing of bone marrow mononuclear cells was performed by high-throughput gene sequencing technology. Defuse software was used to analyze the gene fusion sequence in the transcriptome data, reverse-transcription polymerase chain reaction (RT-PCR) and Sanger sequencing were used to verify the fusion gene with clear pathological significance. Results: All three patients were diagnosed with myeloid leukemia by clinical manifestations, bone marrow cell morphology, immunology, and histochemical staining. Cytogenetic tests showed normal chromosome karyotypes. Fluorescence in situ hybridization and RT-PCR were used to detect BCR-ABL1, PML-RARA, and other common fusion genes. The results were all negative. Transcriptome sequencing and fusion transcripts analysis revealed that these three patients carried rare fusion genes with clear pathological significance, which included BCR-FGFR1, CPSF6-RARG, and NUP98-RARG, respectively. Conclusion: Transcriptome sequencing can accurately analyze rare but pathologically significant fusion genes that may exist in myeloid leukemia patients with normal karyotypes.

Self-monitoring diabetes with multiple mobile health devices

OBJECTIVE

The purpose of this study was to examine the use of multiple mobile health technologies to generate and transmit data from diverse patients with type 2 diabetes mellitus (T2DM) in between clinic visits. We examined the data to identify patterns that describe characteristics of patients for clinical insights.

METHODS

We enrolled 60 adults with T2DM from a US healthcare system to participate in a 6-month longitudinal feasibility trial. Patient weight, physical activity, and blood glucose were self-monitored via devices provided at baseline. Patients also responded to biweekly medication adherence text message surveys. Data were aggregated in near real-time. Measures of feasibility assessing total engagement in device submissions and survey completion over the 6 months of observation were calculated.

RESULTS

It was feasible for participants from different socioeconomic, educational, and racial backgrounds to use and track relevant diabetes-related data from multiple mobile health devices for at least 6 months. Both the transmission and engagement of the data revealed notable patterns and varied by patient characteristics.

DISCUSSION

Using multiple mobile health tools allowed us to derive clinical insights from diverse patients with diabetes. The ubiquitous adoption of smartphones across racial, educational, and socioeconomic populations and the integration of data from mobile health devices into electronic health records present an opportunity to develop new models of care delivery for patients with T2DM that may promote equity as well.

Intestinal epithelium-derived BATF3 promotes colitis-associated colon cancer through facilitating CXCL5-mediated neutrophils recruitment

Inflammation is a critical player in the development and progression of colon cancer. Basic leucine zipper transcription factor ATF-like 3 (BATF3) plays an important role in infection and tumor immunity through regulating the development of conventional type 1 dendritic cells (cDC1s). However, the function of BATF3 in colitis and colitis-associated colon cancer (CAC) remains unclear. Here, BATF3 wild-type and knockout mice were used to construct an AOM/DSS-induced CAC model. In addition, DSS-induced chronic colitis, bone marrow cross-transfusion (BMT), neutrophil knockout, and other animal models were used for in-depth research. We found that BATF3 deficiency in intestinal epithelial cells rather than in cDC1s inhibited CAC, which was depended on inflammatory stimulation. Mechanistically, BATF3 directly promoted transcription of CXCL5 by forming a heterodimer with JunD, and accelerated the recruitment of neutrophils through the CXCL5-CXCR2 axis, ultimately increasing the occurrence and development of CAC. Tissue microarray and TCGA data also indicated that high expression of BATF3 was positively correlated with poor prognosis of colorectal cancer and other inflammation-related tumors. In summary, our results demonstrate that intestinal epithelial-derived BATF3 relies on inflammatory stimulation to promote CAC, and BATF3 is expected to be a novel diagnostic indicator for colitis and CAC.

Texture analysis applied in T1 maps and extracellular volume obtained using cardiac MRI in the diagnosis of hypertrophic cardiomyopathy and hypertensive heart disease compared with normal controls

AIM

To assess the potential of texture analysis (TA) applied in T1 maps and extracellular volume (ECV) obtained using cardiac magnetic resonance (CMR) in the diagnosis of hypertrophic cardiomyopathy (HCM) and hypertensive heart disease (HHD) compared with normal controls (NC). Strain parameters were analysed to compare with final TA models.

MATERIALS AND METHODS

This retrospective study included 66 HCM patients, 39 HHD patients, and 41 NC. Step-wise dimension reduction and feature selection were performed by reproducibility, machine learning, collinearity, and multivariable regression analysis to select the texture features that enable diagnosis of and differentiation between HCM and HHD. Strain parameters were calculated by short-axis and three long-axis cine sequences.

RESULTS

Independent features in T1 maps and ECV analysis allowed for the differentiation between patients (HCM and HHD) and NC. Of the best-calculated model, the areas under the receiver operating curve (AUCs) were as follows: 0.969 for T1 map and 0.964 for ECV. To distinguish HCM from HHD, two independent features were screened out for both T1 and ECV maps. The AUCs were as follows: 0.793 for T1 map and 0.894 for ECV. Radial, circumferential, and longitudinal strain parameters could differentiate patients from NC, but only longitudinal strain parameters was significantly different between HCM and HHD.

CONCLUSIONS

Texture analysis of T1 maps and ECV shows high accuracy in differentiating hypertrophic myocardium from NC, and HCM from HHD. Strain parameters are able to demonstrate the difference between patients and NC, but were less impressive in differentiating HCM and HHD.

von Willebrand factor promotes platelet-induced metastasis of osteosarcoma through activation of the VWF-GPIb axis

•

Immunohistochemistry results directly show VWF is increased during tumor progression.

•

VWF is expressed as low molecular weight multimer in OS cell line SAOS2.

•

VWF promotes platelet-induced metastasis of OS through VWF-GPIb pathway.

von Willebrand factor (VWF) is exclusively expressed in endothelial cells (ECs) and megakaryocytes, which plays a crucial role in the initiation of arterial thrombosis. Recent studies have shown that VWF is also expressed in osteosarcoma (OS) cells and participates in adhesion of cancer cells to platelets, thus promoting metastasis of OS cells. However, it is unclear how OS cell-derived VWF-platelet interaction contributes to the metastasis of OS. We hypothesized that the interaction is mediated by the binding between VWF A1 and GPIbα of platelets, a molecular mechanism similar to that of thrombosis. The increased expression of VWF in SAOS2 cells may contribute to the enhancement of platelet adhesion through the VWF-GPIb pathway, which could promote the migration and invasion capacities of SAOS2 cells in vitro. Antibodies that block the pathway could significantly inhibit the platelet-induced metastasis of OS cells. Our results suggest a theoretical basis for the development of new anti-OS metastasis drugs, and further enrich the mechanism of OS metastasis.

Influence of Silver Diamine Fluoride Treatment on the Microtensile Bond Strength of Glass Ionomer Cement to Sound and Carious Dentin

CLINICAL RELEVANCE

This study provides valuable information about the influence of silver diamine fluoride (SDF) treatment on the microtensile bond strength of glass ionomer cement (GIC) to dentin.

SUMMARY

Objectives: To investigate the influence of silver diamine fluoride (SDF) treatment on the microtensile bond strength (mTBS) of glass ionomer cement (GIC) to sound and artificial carious dentin.Methods: Thirty dentin blocks prepared from 30 noncarious human molars were randomly allocated into either the sound (Gp1) or artificial carious dentin (Gp2) groups. A microbiological method was adopted to create artificial dentin caries lesions in Gp2 specimens. Each dentin block was sectioned into two halves perpendicularly, and each pair of block halves was randomly assigned to two subgroups to receive topical application of SDF (Gp1-SDF, Gp2-SDF) or water as control (Gp1-water, Gp2-water). An encapsulated GIC was bonded to the exposed dentin surfaces 14 days after the SDF/water application. After immersion for 7 days in artificial saliva, the GIC-dentin specimens were sectioned into beams for mTBS testing. Failure mode was examined after the mTBS test.Results: There was no significant difference in the mean mTBS values between the SDF and control subgroups (Gp1-SDF vs Gp1-water, 10.57±1.6 MPa vs 10.20±1.8 MPa; Gp2-SDF vs Gp2-water, 6.14±2.2 MPa vs 5.97±2.3 MPa; paired t-test, p>0.05). However, the mean mTBS value of the sound dentin group was significantly higher than that of the carious dentin group, irrespective of whether SDF was applied prior to GIC bonding (independent t-test, p<0.001). Proportionally more cohesive failures occurred in the sound dentin groups (Gp1-SDF, 48.4%; Gp1-water, 42.9%) compared with the carious dentin groups (Gp2-SDF, 15.6%; Gp2-water, 9.8%; p<0.05).Conclusions: SDF treatment had no significant influence on the mTBS of GIC to dentin. Compared with sound dentin, dentin with caries had lower mTBS to GIC.

Nano Assessing Nano: Nanosensor-Enabled Detection of Cell Phenotypic Changes Identifies Nanoparticle Toxicological Effects at Ultra-Low Exposure Levels

Industrial use of nanomaterials is rapidly increasing, making the effects of these materials on the environment and human health of critical concern. Standard nanotoxicity evaluation methods rely on detecting cell death or major dysfunction and will miss early signs of toxicity. In this work, the use of rapid and sensitive nanosensors that can efficiently detect subtle phenotypic changes on the cell surface following nanomaterial exposure is reported. Importantly, the method reveals significant phenotypic changes at dosages where other conventional methods show normal cellular activity. This approach holds promise in toxicological and pharmacological evaluations to ensure safer and better use of nanomaterials.

Coronavirus disease 2019: a clinical review

In December 2019, an outbreak of coronavirus disease 2019 (COVID-19) caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) was reported in Wuhan, China, and it subsequently spread in many countries around the world. Many efforts have been applied to control and prevent the spread of COVID-19, and many scientific studies have been conducted in a short period of time. Here we present an overview of the viral structure, pathogenesis, diagnosis, and clinical features of COVID-19 based on the current state of knowledge, and we compare its clinical characteristics with SARS and Middle East Respiratory Syndrome (MERS). Current researches on potentially effective treatment alternatives are discussed. We hope this review can help medical workers and researchers around the world contain the current COVID-19 pandemic.

Signal multi-amplified electrochemical biosensor for voltammetric determination of tau-441 protein in biological samples using carbon nanomaterials and gold nanoparticles to hint dementia

A signal multi-amplified electrochemical biosensor was fabricated for tau-441 protein, a dementia biomarker. It utilizes a carbon nanocomposite film modified gold electrode. The carbon nanocomposite film was composed of multi-walled carbon nanotubes (MWCNTs), reduced graphene oxide (rGO), and chitosan (CS). For the nanocomposite film, rGO improved the dispersibility of MWCNTs, and the effective surface area of MWCNTs was increased. On the other hand, MWCNTs also increased the interlayer spacing of rGO, resulting in a thinner rGO layer. MWCNTs-rGO had a better conductivity than that of MWCNTs and rGO due to the synergy effect. Biocompatible CS was employed for immobilization of the specific antibody. Tau-441 protein was modified with gold nanoparticles (AuNPs) for signal amplification again. The response of the electrochemical biosensor is linear in the range 0.5-80 fM (0.5, 1.5, 5, 10, 40, 80 fM) with a limit of detection (LOD) of 0.46 fM, using differential pulse voltammetry (DPV) in a potential range of - 100-500 mV. The biosensor was successfully applied to the analysis of serum samples of 14 normal people, 14 mild cognitive impairment (MCI) patients, and 14 dementia patients. Graphical abstract Schematic representation of signal multi-amplified electrochemical biosensor for determination of tau-441 protein in human serum.

Search for Electron Antineutrino Appearance in a Long-Baseline Muon Antineutrino Beam

Electron antineutrino appearance is measured by the T2K experiment in an accelerator-produced antineutrino beam, using additional neutrino beam operation to constrain parameters of the Pontecorvo-Maki-Nakagawa-Sakata (PMNS) mixing matrix. T2K observes 15 candidate electron antineutrino events with a background expectation of 9.3 events. Including information from the kinematic distribution of observed events, the hypothesis of no electron antineutrino appearance is disfavored with a significance of 2.40σ and no discrepancy between data and PMNS predictions is found. A complementary analysis that introduces an additional free parameter which allows non-PMNS values of electron neutrino and antineutrino appearance also finds no discrepancy between data and PMNS predictions.

Effects of stacking periodicity on the electronic and optical properties of GaAs/AlAs superlattice: a first-principles study

The effects of stacking periodicity on the electronic and optical properties of GaAs/AlAs superlattice have been explored by density functional theory calculations. Among the (GaAs)m/(AlAs)m, (GaAs)1/(AlAs)m and (GaAs)m/(AlAs)1 (m = 1 to 5) superlattices, the band gaps of (GaAs)m/(AlAs)1 superlattices decrease significantly as the layer of GaAs increases, and the cut-off wavelengths are found to locate in the near infrared region. For (GaAs)m/(AlAs)1 SLs, the conduction bands shift toward Fermi level, resulting in the smaller band gap, while conduction bands of (GaAs)1/(AlAs)n SLs slightly shift to higher energy, which lead to comparable band gaps. The layer number of GaAs shows negligible effects on the reflectivity spectra of superlattice structures, while the absorption coefficient shows a red-shift with the increasing layer of GaAs, which is beneficial for the application of GaAs/AlAs superlattice in the field of near infrared detector. These results demonstrate that controlling the number of GaAs layers is a good method to engineer the optoelectronic properties of GaAs/AlAs superlattice.

Fluorescence assay for three organophosphorus pesticides in agricultural products based on Magnetic-Assisted fluorescence labeling aptamer probe

There has been increasing recent concern about the agricultural use of organophosphorus pesticides. A rapid and sensitive fluorescence assay for the detection of three organophosphorus pesticides has therefore been developed using 6-carboxy-fluorescein labeling aptamer as the probe and functionalized magnetic nanoparticles as the separation carrier. The aptamer hybridized with complementary DNA conjugated on the surface of the magnetic nanoparticles to form a magnetic aptamer-complementary DNA complex. Upon introducing the target organophosphorus pesticide, the aptamer departed from the complementary DNA, resulting in the fluorescence signal. Under optimized conditions, the limits of detection (LODs, S/N = 3) for trichlorfon, glyphosate, and malathion were 72.20 ng L-1, 88.80 ng L-1, and 195.37 ng L-1, respectively. The method was applied for the detection of trichlorfon, glyphosate, and malathion in spiked lettuce and carrot samples. The recoveries were in the range of 79.4%-118.7%, which were in good agreement with those obtained by gas chromatography, and the relative standard deviations were also acceptable. The method therefore has high sensitivity, so provides a means for the detection of multiple organophosphorus pesticides.

Evaluating Plasma Skimming with Whole Blood in Small Gap Region Imitating Clearance of Blood Pumps

Plasma skimming is the phenomenon whereby the discharge hematocrit is lower than feed hematocrit naturally occurring in the microvessels with Poiseuille flow. It has been studied in Poiseuille flow extensively. Besides, plasma skimming has also been observed and investigated in blood pumps due to its potential to prevent hemolysis by skimming blood cells out of the small gap. However, whether plasma skimming occurs in blood pumps with whole blood has not been verified. Additionally, the independent influence of rotational speed and gap size has not been clarified. Therefore, in order to lay the foundation of applying plasma skimming to the development of blood pumps and also investigate the influence of rotational speed and gap size on plasma skimming respectively, we designed a simplified geometric device which not only imitates the flow inside clearances of blood pumps, but also provides different rotational speed and gap size conditions. We first conducted the verification tests of plasma skimming using whole blood with an initial hematocrit of 44% and the gap size was varied from 10 μm to 240 μm with 10 μm interval. The plasma skimming was verified occurring when the gap was less than 70 μm at a rotational speed of 800 rpm. Since plasma skimming was confirmed, we employed 30% hematocrit blood and performed the following tests to evaluate the influence of rotational speed of 600 rpm, 700 rpm, and 800 rpm respectively. As a result, the hematocrit of sampled blood declined as the rotational speed increased from 600 rpm to 800 rpm. And there was the lowest hematocrit of 16% when the gap was adjusted to 50 μm gap size at 800 rpm. This study further promotes the possibility of applying plasma skimming to the blood pumps with higher hemocapability.

Incorporating non-stomatal limitation improves the performance of leaf and canopy models at high vapour pressure deficit

Vapour pressure deficit (D) is projected to increase in the future as temperature rises. In response to increased D, stomatal conductance (gs) and photosynthesis (A) are reduced, which may result in significant reductions in terrestrial carbon, water and energy fluxes. It is thus important for gas exchange models to capture the observed responses of gs and A with increasing D. We tested a series of coupled A-gs models against leaf gas exchange measurements from the Cumberland Plain Woodland (Australia), where D regularly exceeds 2 kPa and can reach 8 kPa in summer. Two commonly used A-gs models were not able to capture the observed decrease in A and gs with increasing D at the leaf scale. To explain this decrease in A and gs, two alternative hypotheses were tested: hydraulic limitation (i.e., plants reduce gs and/or A due to insufficient water supply) and non-stomatal limitation (i.e., downregulation of photosynthetic capacity). We found that the model that incorporated a non-stomatal limitation captured the observations with high fidelity and required the fewest number of parameters. Whilst the model incorporating hydraulic limitation captured the observed A and gs, it did so via a physical mechanism that is incorrect. We then incorporated a non-stomatal limitation into the stand model, MAESPA, to examine its impact on canopy transpiration and gross primary production. Accounting for a non-stomatal limitation reduced the predicted transpiration by ~19%, improving the correspondence with sap flow measurements, and gross primary production by ~14%. Given the projected global increases in D associated with future warming, these findings suggest that models may need to incorporate non-stomatal limitation to accurately simulate A and gs in the future with high D. Further data on non-stomatal limitation at high D should be a priority, in order to determine the generality of our results and develop a widely applicable model.

Performance of IOTA ADNEX model in evaluating adnexal masses in a gynecological oncology center in China

OBJECTIVE

To evaluate the diagnostic accuracy of the International Ovarian Tumor Analysis (IOTA) Assessment of Different NEoplasias in the adneXa (ADNEX) model in the preoperative diagnosis of adnexal masses using data from a gynecological oncology center in China.

METHODS

This was a single-center, retrospective diagnostic accuracy study based on ultrasound data collected prospectively, between May and December 2017, from 278 patients with at least one adnexal (ovarian, paraovarian or tubal) mass. Clinical and pathologic information, serum CA 125 level and ultrasonographic findings were collected. All patients underwent surgery and the histopathological diagnosis was used as reference standard. The final diagnosis was classified into five tumor types according to the ADNEX model: benign ovarian tumor, borderline ovarian tumor (BOT), Stage-I ovarian cancer (OC), Stages-II-IV OC and ovarian metastasis. Receiver-operating characteristics (ROC) curve analysis was used to evaluate the diagnostic accuracy of the ADNEX model, with and without inclusion of CA 125 level in the model.

RESULTS

Of the 278 women included, 203 (73.0%) had a benign ovarian tumor and 75 (27.0%) had a malignant ovarian tumor, including 18 (6.5%) with BOT, 17 (6.1%) with Stage-I OC, 32 (11.5%) with Stages-II-IV OC and eight (2.9%) with ovarian metastasis. The performance of the IOTA ADNEX model was good for discriminating between benign and malignant tumors, with an area under the ROC curve (AUC) of 0.94 (95% CI, 0.91-0.97) when CA 125 was included in the model and AUC of 0.93 (95% CI, 0.90-0.96) without CA 125. The AUC values of the model including CA 125 ranged between 0.61 and 0.99 for distinguishing between the different types of tumor, and it showed excellent performance in discriminating between a benign ovarian tumor and Stages-II-IV OC, with an AUC of 0.99 (95% CI, 0.97-1.00). The performance of the model was less effective at distinguishing between BOT and Stage-I OC and between Stages-II-IV OC and ovarian metastasis, with AUC values of 0.61 (95% CI, 0.43-0.77) and 0.78 (95% CI, 0.62-0.90), respectively. Although inclusion of CA 125 did not alter the performance of the ADNEX model in discriminating between benign and malignant lesions (AUC of 0.94 and 0.93 with and without CA 125 level, respectively; P = 0.54), the inclusion of CA 125 in the model improved its performance in discriminating between Stage-I OC and Stages-II-IV OC (AUC increased from 0.81 to 0.92; P = 0.04) and between Stages-II-IV OC and metastatic cancer (AUC increased from 0.58 to 0.78; P = 0.01).

CONCLUSIONS

The IOTA ADNEX model showed good to excellent performance in distinguishing between benign and malignant adnexal masses and between the different types of ovarian tumor in a Chinese setting. Based on our findings, the ADNEX model has high value in clinical practice and can aid in the preoperative diagnosis of patients with an adnexal mass. Copyright © 2019 ISUOG. Published by John Wiley & Sons Ltd.