VOC contamination in hospital, from stationary sampling of a large panel of compounds, in view of healthcare workers and patients exposure assessment

BACKGROUND

We aimed to assess, for the first time, the nature of the indoor air contamination of hospitals.

METHODS AND FINDINGS

More than 40 volatile organic compounds (VOCs) including aliphatic, aromatic and halogenated hydrocarbons, aldehydes, alcohols, ketones, ethers and terpenes were measured in a teaching hospital in France, from sampling in six sampling sites--reception hall, patient room, nursing care, post-anesthesia care unit, parasitology-mycology laboratory and flexible endoscope disinfection unit--in the morning and in the afternoon, during three consecutive days. Our results showed that the main compounds found in indoor air were alcohols (arithmetic means ± SD: 928±958 µg/m³ and 47.9±52.2 µg/m³ for ethanol and isopropanol, respectively), ethers (75.6±157 µg/m³ for ether) and ketones (22.6±20.6 µg/m³ for acetone). Concentrations levels of aromatic and halogenated hydrocarbons, ketones, aldehydes and limonene were widely variable between sampling sites, due to building age and type of products used according to health activities conducted in each site. A high temporal variability was observed in concentrations of alcohols, probably due to the intensive use of alcohol-based hand rubs in all sites. Qualitative analysis of air samples led to the identification of other compounds, including siloxanes (hexamethyldisiloxane, octamethyltrisiloxane, decamethylcyclopentasiloxane), anesthetic gases (sevoflurane, desflurane), aliphatic hydrocarbons (butane), esters (ethylacetate), terpenes (camphor, α-bisabolol), aldehydes (benzaldehyde) and organic acids (benzoic acid) depending on sites.

CONCLUSION

For all compounds, concentrations measured were lower than concentrations known to be harmful in humans. However, results showed that indoor air of sampling locations contains a complex mixture of VOCs. Further multicenter studies are required to compare these results. A full understanding of the exposure of healthcare workers and patients to complex mixtures of chemical compounds can then be related to potential health outcomes.

Contribution to surface water contamination understanding by pesticides and pharmaceuticals, at a watershed scale

This study aims at understanding the presence of regulated and emerging micropollutants, particularly pesticides and pharmaceuticals, in surface water, regarding spatial and temporal influences at a watershed scale. The study of relations between micropollutants and other water quality and hydroclimatic parameters was carried out from a statistical analysis on historical and experimental data of different sampling sites from the main watershed of Brittany, western France. The outcomes point out the influence of urban and rural areas of the watershed as well as the impact of seasons on contamination variations. This work contributes to health risk assessment related to surface water contamination by micropollutants. This approach is particularly interesting in the case of agricultural watersheds such as the one studied, where more than 80% of surface water is used to produce drinking water.

In situ three-dimensional reciprocal-space mapping during mechanical deformation

Mechanical deformation of a SiGe island epitaxically grown on Si(001) was studied by a specially adapted atomic force microscope and nanofocused X-ray diffraction. The deformation was monitored during in situ mechanical loading by recording three-dimensional reciprocal-space maps around a selected Bragg peak. Scanning the energy of the incident beam instead of rocking the sample allowed the safe and reliable measurement of the reciprocal-space maps without removal of the mechanical load. The crystal truncation rods originating from the island side facets rotate to steeper angles with increasing mechanical load. Simulations of the displacement field and the intensity distribution, based on the finite-element method, reveal that the change in orientation of the side facets of about 25° corresponds to an applied pressure of 2-3 GPa on the island top plane.

Occurrence and toxicity of antimicrobial triclosan and by-products in the environment

INTRODUCTION AND AIMS

A review was undertaken on the occurrence, toxicity, and degradation of triclosan (TCS; 5-chloro-2,4-dichlorophenoxy)phenol) in the environment. TCS is a synthetic, broad-spectrum antibacterial agent incorporated in a wide variety of household and personal care products such as hand soap, toothpaste, and deodorants but also in textile fibers used in a range of other consumer products (e.g., toys, undergarments and cutting boards among other things).

OCCURRENCE

Because of its partial elimination in sewage treatment plants, most reports describe TCS as one of the most commonly encountered substances in solid and water environmental compartments. It has been detected in a microgram per liter or microgram per kilogram level in sewage treatment plants (influents, effluents, and sludges), natural waters (rivers, lakes, and estuarine waters), and sediments as well as in drinking water.

TOXICITY

Moreover, due to its high hydrophobicity, TCS can accumulate in fatty tissues and has been found in fish and human samples (urine, breast milk, and serum). TCS is known to be biodegradable, photo-unstable, and reactive towards chlorine and ozone.

DISCUSSION

As a consequence, it can be transformed into potentially more toxic and persistent compounds, such as chlorinated phenols and biphenyl ethers after chlorination, methyl triclosan after biological methylation, and chlorinated dibenzodioxins after photooxidation. The toxicity of TCS toward aquatic organisms like fish, crustaceans, and algae has been demonstrated with EC50 values near TCS environmental concentrations. It has even been shown to produce cytotoxic, genotoxic, and endocrine disruptor effects.

CONCLUSION

Furthermore, the excessive use of TCS is suspected to increase the risk of emergence of TCS-resistant bacteria and the selection of resistant strains.

Retrospective study of 155 cases of prolapse of the nictitating membrane gland in dogs

A retrospective study of 155 cases (114 dogs). The breed, sex and age at the time of the first and opposite onset of nictitans gland prolapse were recorded. Long-term follow-up with a minimum of one-year duration was performed by telephone conversations. One hundred and fourteen dogs representing 155 nictitans gland prolapses were included. 75.4 per cent of the first prolapse occur before one year of age. Unilateral nictitans gland prolapse was observed in 64 per cent of cases. When the condition was bilateral, it occurred simultaneously in 41.4 per cent. When it was bilateral but not simultaneous (24/41), the opposite gland prolapse occurred within three months in 70.8 per cent of the cases. Five breeds were most commonly affected by the bilateral condition: French bulldog, shar pei, great dane, English bulldog and cane corso.

Assessment of exposure to alcohol vapor from alcohol-based hand rubs

This study assessed the inhaled dose of alcohol during hand disinfection. Experiments were conducted with two types of hand rub using two hand disinfection procedures. Air samples were collected every 10 s from the breathing zone, by bubbling through a mixture of K₂Cr₂O₇ and H₂SO₄. The reduction of dichromate ions in the presence of alcohols was followed by UV-vis spectrophotometry. The difference in intensity of the dichromate absorption peak was used to quantify the alcohol concentration expressed in ethanol equivalent. During hygienic hand disinfection, the mean ethanol equivalent concentrations peaked at around 20–30 s for both hand rubs (14.3 ± 1.4 mg/L for hand rub 1 and 13.2 ± 0.7 mg/L for hand rub 2). During surgical hand disinfection, two peaks were found at the same time (40 and 80 s) for both hand rubs. The highest mean concentrations were 20.2 ± 0.9 mg/L for hand rub 1 and 18.1 ± 0.9 mg/L for hand rub 2. For hand rub 1, the total absorbed doses, calculated from ethanol with an inhalation flow of 24 L/min and an absorption rate of 62%, were 46.5 mg after one hygienic hand disinfection and 203.9 mg after one surgical hand disinfection. Although the use of ABHRs leads to the absorption of very low doses, sudden, repeated inhalation of high alcohol concentrations raises the question of possible adverse health effects.

Oral fondaparinux: use of lipid nanocapsules as nanocarriers and in vivo pharmacokinetic study

Oral anticoagulant therapy could be advanced using lipid-based nanoparticulate systems. This study examined lipid nanocapsules for their oral absorption potential as the first step in developing oral fondaparinux (Fp) novel carriers. Using phase inversion method and cationic surfactants such as hexadecyltrimethyl ammonium bromide (CTAB) or stearylamine (SA), cationic lipid nanocapsules (cLNCs), loaded with Fp on their surface, were prepared and characterized (zeta potential, size and Fp association efficiency and content). In vivo studies were conducted after single oral increasing doses of Fp-loaded cLNCs (0.5 to 5 mg/kg of Fp) in rats and the concentration of Fp in the plasma was measured by anti-factor Xa activity assay. The monodisperse, (~50 nm), positively charged Fp-cLNCs with high drug loadings demonstrated linear pharmacokinetic profiles of the drug with an increased oral absolute bioavailability (up to ~21%) compatible with therapeutic anticoagulant effect (>0.2 μg/mL).

Nanometer scale assessment of mechanical strain induced in silicon by a periodic line array

Measuring stress and strain, induced by nanostructures, at the nanometer scale is still a challenge. In this work, we investigate the strain induced by sub-micrometric periodic line arrays deposited on single crystal (001) Si substrate. We study the influence of the lines width and the spacing between the lines for two sets of samples: a silicon nitride lines array and a poly-silicon line array capped with a Si3N4 stressor layer. The periodic strain field in mono-crystalline silicon is investigated by High Resolution X-ray Diffraction which is very sensitive to local strain (< 10(-4)), has the required resolution, and is non-destructive. X-ray reciprocal space maps (RSM) are measured on a 4 circles goniometer with a laboratory source. The line arrays induce a periodic strain field in silicon, which gives rise to distinct satellites in reciprocal space. The intensity envelope of these satellites is related to the strain field in one cell. In order to assess this strain field in silicon, mechanical modeling is necessary. Elastic calculations are performed with a Finite Element Modeling (FEM) code in order to extract the displacement field that is used for structure factor calculations within kinematical approximation. The calculated reciprocal space map is compared to the experimental results in order to validate the strain field. We show that for capped poly arrays, the diffracted intensity envelope is influenced by the spacing between the lines. This area is filled with silicon nitride which induces a noticeable change in displacement and strain field. While for bare stressor arrays the nitride line width is responsible of change in displacement field and thus on the RSM intensity envelope.

Organic contamination of settled house dust, a review for exposure assessment purposes

People spend a considerable amount of time indoors. As a result, exposure to indoor contaminants is of great concern, notably via settled dust ingestion in particular for infants and toddlers. This paper proposes a critical review on the organic contamination of settled house dust and human exposure over the past 10 years and focused on sources, contaminations and measurement methods (sampling, pretreatment, storage and analysis). As many compounds were identified, arises the question of which ones to consider. Sensitive and selective analytical methods for simultaneous determination of targeted substances should be developed and evaluated. Various methods were described for sampling and sample preparation. Harmonization and standardization are needed to enable comparison of results from similar studies. Finally, an integrated multipollutant and multicompartment (settled dust, suspended particles and air) approach appears essential in order to determine the extent of the threat to public health posed by indoor contaminants.

Probing higher order correlations of the photon field with photon number resolving avalanche photodiodes

We demonstrate the use of two high speed avalanche photodiodes in exploring higher order photon correlations. By employing the photon number resolving capability of the photodiodes the response to higher order photon coincidences can be measured. As an example we show experimentally the sensitivity to higher order correlations for three types of photon sources with distinct photon statistics. This higher order correlation technique could be used as a low cost and compact tool for quantifying the degree of correlation of photon sources employed in quantum information science.

Mutation rate switch inside Eurasian mitochondrial haplogroups: impact of selection and consequences for dating settlement in Europe

R-lineage mitochondrial DNA represents over 90% of the European population and is significantly present all around the planet (North Africa, Asia, Oceania, and America). This lineage played a major role in migration “out of Africa” and colonization in Europe. In order to determine an accurate dating of the R lineage and its sublineages, we analyzed 1173 individuals and complete mtDNA sequences from Mitomap. This analysis revealed a new coalescence age for R at 54.500 years, as well as several limitations of standard dating methods, likely to lead to false interpretations. These findings highlight the association of a striking under-accumulation of synonymous mutations, an over-accumulation of non-synonymous mutations, and the phenotypic effect on haplogroup J. Consequently, haplogroup J is apparently not a Neolithic group but an older haplogroup (Paleolithic) that was subjected to an underestimated selective force. These findings also indicated an under-accumulation of synonymous and non-synonymous mutations localized on coding and non-coding (HVS1) sequences for haplogroup R0, which contains the major haplogroups H and V. These new dates are likely to impact the present colonization model for Europe and confirm the late glacial resettlement scenario.

Effect of non-ideal clamping shape on the resonance frequencies of silicon nanocantilevers

In this paper, we investigate the effects of non-ideal clamping shapes on the dynamic behavior of silicon nanocantilevers. We fabricated silicon nanocantilevers using silicon on insulator (SOI) wafers by employing stepper ultraviolet (UV) lithography, which permits a resolution of under 100 nm. The nanocantilevers were driven by electrostatic force inside a scanning electron microscope (SEM). Both lateral and out-of-plane resonance frequencies were visually detected with the SEM. Next, we discuss overhanging of the cantilever support and curvature at the clamping point in the silicon nanocantilevers, which generally arises in the fabrication process. We found that the fundamental out-of-plane frequency of a realistically clamped cantilever is always lower than that for a perfectly clamped cantilever, and depends on the cantilever width and the geometry of the clamping point structure. Using simulation with the finite-elements method, we demonstrate that this discrepancy is attributed to the particular geometry of the clamping point (non-zero joining curvatures and a flexible overhanging) that is obtained in the fabrication process. The influence of the material orthotropy is also investigated and is shown to be negligible.

Effect of endocrine disruptor pesticides: a review

Endocrine disrupting chemicals (EDC) are compounds that alter the normal functioning of the endocrine system of both wildlife and humans. A huge number of chemicals have been identified as endocrine disruptors, among them several pesticides. Pesticides are used to kill unwanted organisms in crops, public areas, homes and gardens, and parasites in medicine. Human are exposed to pesticides due to their occupations or through dietary and environmental exposure (water, soil, air). For several years, there have been enquiries about the impact of environmental factors on the occurrence of human pathologies. This paper reviews the current knowledge of the potential impacts of endocrine disruptor pesticides on human health.

Impacts of rainfall events on runoff water quality in an agricultural environment in temperate areas

Since a rise in dissolved organic carbon (DOC) concentrations has been observed for surface waters at least over the last two decades, a change in weather conditions (temperature and precipitations) has been proposed to partly explain this increase. While the majority of DOC delivery from soils to stream occurs during rainfall events, a better understanding of the rainfall influence on DOC release is needed. This study has been conducted in Brittany, western France, on agricultural experimental plots receiving either cattle manure (CM) or pig slurry (PS) as fertilizers in accordance with local practices. Each plot was instrumented with a flow meter and an auto sampler for runoff measurements. The results show that export of DOC during high intensity events is higher than during lower intensity rainfalls. Fertilization has a noticeable impact on total organic carbon (TOC) fluxes with an increase of five to seven folds for PS and CM respectively. If TOC shock load occurs shortly after the rainfall peak, DOC maximum appears with the first flush of the event. Organic carbon (OC) is mainly under colloidal (41.2%) and soluble (23.9%) forms during the first stage of a rainfall event and a control of rainfall intensity on OC colloidal transport is suggested. These findings highlight the potential risk of receiving water quality degradation due to the increase of heavier rainfall events with climate change in temperate areas.

X-Ray Diffraction Analysis and Modeling of Strain Induced Thermal Cycling in a Thin Aluminum (011) Bicrystal Film

Heteroepitaxial films of aluminum bicrystals grown on silicon provide a model system in which to study plasticity in polycrystalline metal thin films. For the bicrystal films, dislocations are confined to move on two different slip plane orientations because of the orientation of the crystals on the substrate. In-situ transmission electron microscopy (TEM) observations during thermal cycling have shown two threshold temperatures for dislocation motion on cooling. A simple model uses the resolved shear stress on the possible slip planes to explain the TEM observations. Mechanisms responsible for the dislocation behavior are studied in-situ during thermal cycling between room temperature and 450°C with x-ray diffraction. The strains are determined using a sin2(Ψ) analysis at each temperature. Direct comparisons are made between the TEM observations, the model and x-ray diffraction results.

In Situ Stress and Strain Measurements During the Growth of Cu/Ni (001) Multilayers

Cu/Ni (001) multilayers have been grown by molecular beam epitaxy at room temperature. In-situ electron diffraction and curvature measurements performed during the growth are presented. The average lattice parameter in the equiatomic multilayers evolves gradually towards the alloy lattice parameter. The in-plane lattice parameter of both Cu and Ni evolves continuously towards the bulk lattice parameter with no evidence of pseudomorphic growth. The combination of diffraction and curvature measurements suggests that the Ni on Cu interface is diffuse. This is attributed to the surfactant behaviour of Cu. This results shed new insights into the interesting magnetic properties of Ni films on Cu (001).

Multispectral Spectroscopic Ellipsometry-A New Tool for In Situ Surface Analysis

Spectroscopie ellipsometry is a non-destructive tool for physical characterization without prior preparation of materials.Real time, in-situ measurements can be applied to analyze surface problems, to optimize thin film processing and even to monitor epitaxial growth or thin film deposition. Spectroscopie Eilipsometers built by SOPRA are described. A new instrument using Optical Multi-channel Analysis,(OMA), with a spectral range from 1.1 ev up to 4.8 ev which gives up to 11 ellipsometry spectra per second has been developed. Applications using Spectroscopie Ellipsometry are also discussed .

Plasticity-Related Phenomena in Metallic Films on Substrates

Plastic deformation due to thermal stresses has been investigated for different metallic films deposited on Si or α-alumina substrates. We conducted post-mortem TEM and SEM investigations of samples that underwent thermal cycles in order to capture the microstructural changes imposed by thermal stresses. The ultimate goal is to determine the dominant plasticity mechanisms responsible for such changes. In-situ thermal cycles performed inside the TEM allowed direct and real-time observations of dislocation behaviour under stress. It is shown that dislocation density drops in Al/Si, Au/Si and in Cu/α-alumina thin film systems. Except in the case of pseudo-epitaxial Cu on sapphire, the interaction of dislocations with the interfaces (passivation, oxide, adhesion layer) is attractive and leads to the disappearance of interfacial dislocations. In this light, the generalized observation of high tensile stresses that arise in metallic films at the end of cooling is explained in terms of insufficient dislocation sources instead of classic strain hardening. Diffusional processes can substitute for a lack of dislocation, but the low relaxation strain rate that would be excpected should lead to high stresses during the cooling stages of thermal cycles.

Residual Stresses in Ultrathin Metal Sublayers Within Au/Ni Multilayers

Metallic Multilayers (MLs) have attracted a considerable interest during these last years because of their unusual properties. In small periods ML's (a few nm) the high density of interfaces give rise to structures very far from equilibrium. Au/Ni multilayers have been grown in the (111) orientation by M.B.E. on Si(100) via a Cu(100) buffer layer. Two different parameters have been studied: the Au:Ni ratio at constant (4 nm) superperiod and the superperiod at constant (1:1) Au:Ni ratio. The full strain state of Au and of Ni has been determined via x-ray diffraction measurements. The high lattice parameter misfit beween Au and Ni (14%) implies that all the layers are partially relaxed. Residual strains as high as several % are encountered. The residual strain in the Au layers is clearly correlated with their thickness. A residual stress as high as 3.9 GPa is determined in the thinner layers.

Precursor Delivery for the Deposition of Superconducting Oxides: a Comparison Between Solid Sources and Aerosol

Epitaxial thin layers of YBa 2Cu 3O7−x (Tc=90 K, Jc (OT, 77 K) = 2 106 A cm-2) were synthesised by thermal decomposition (750 − 830 °C) of tetramethylheptanedionates of yttrium, barium and copper in the presence of oxygen. Three different precursor delivery systems have been used: In the first, the precursor's surface is flushed with the carrier gas (Ar), in the second, argon is directly injected through the powder leading to a much higher transport rate, and in the third, a liquid (diketonates in a solvent) is nebulized via a piezoelectric transducer. The transport and deposition rates obtained in these three different reactors will be compared.

Issues of drinking water quality of small scale water services towards climate change

As climate change could impact water quantity and quality, important concerns are related to water quality degradation in small scale water services (SSWS). SSWS using surface waters resources (rivers and lakes) for drinking water production are particularly vulnerable to short term transient events due to their low adaptation capacity and their lack of support and technical knowledge compared to major centralized systems. Based on weather and water quality databases, a case study was conducted on a SSWS in Brittany (France) pumping from surface water. Results show an important vulnerability in treatment efficiency related to the lowest and highest river flows and provide first assumptions about the impacts of an increase in extreme weather events with climate change on drinking water quality.

Prehospital airway management: A prospective case study

We conducted a one-year prospective study involving a prehospital Emergency Medical Service in the Netherlands to investigate the incidence of failed or difficult prehospital endotracheal intubation. During the study period the paramedics were asked to fill in a registration questionnaire after every endotracheal intubation. Of the 26,271 patient contacts, 256 endotracheal intubations were performed by paramedics in one year. Endotracheal intubation failed in 12 patients (4.8%). In 12.0% of 249 patients, a Cormack and Lehane grade III laryngoscopy was reported and a grade IV laryngoscopy was reported in 10.4%. The average number of endotracheal intubations per paramedic in one year was 4.2 and varied from zero to a maximum of 12. The median time between arrival on the scene and a positive capnograph was 7 min.38 s in the case of a Cormack and Lehane grade I laryngoscopy and 14 min.58 s in the case of a Cormack and Lehane grade 4 laryngoscopy. The incidence of endotracheal intubations performed by Dutch paramedics in one year was low, but endotracheal intubation was successful in 95.2%, which is comparable with findings in international literature. Early capnography should be used consistently in prehospital airway management.

Can intensive use of alcohol-based hand rubs lead to passive alcoholization?

Hand disinfection with alcohols-based hand rubs (ABHRs) are known to be the most effective measure to prevent nosocomial infections in healthcare. ABHRs contain on average 70% by weight of one or more alcohols. During the hand rubbing procedure, users are exposed to these alcohols not only through dermal contact, but also via inhalation, due to the physical and chemical properties of alcohols volatilizing from alcoholic solutions or gels into the air. Ethanol ingestion is well known to increase risks of several diseases (affecting the pancreas, liver, cardiovascular system…), but there is a lack of knowledge about the effects of exposure to other alcohols (including n- or isopropanol) via inhalation and dermal contact, despite the worldwide use of ABHRs. This work aims at discussing possible health effects related to unintentional alcoholization (via inhalation and dermal contact) from professional ABHR usage to suggest the need for more research in this area (but not to question the value of ABHRs). Based upon an average of 30 hand rubbings per healthcare professional per day, it can be assumed that a healthcare worker may be exposed to a maximum 5,500 mg/m(3) per work shift, five times above the recommended occupational time weighted average limit. Thus, in order to answer the question posed in the title, studies on spatial and temporal variability of alcohol emission from ABHRs in real world situations and studies on certain high risk individuals are needed.

Characterization of cylindrospermopsin chlorination

In temperate countries, the occurrence of cyanobacterial blooms threatens drinking water resources. Consequently, cyanotoxins are increasingly considered in water treatment, and their reactions with chlorine used to disinfect drinking water are particularly investigated. This study presents new elements for further understanding of cylindrospermopsin chlorination, through reactants and by-products monitoring, UV spectrum examination, and cytotoxicity assessment on human intestinal Caco-2 cells. On the one hand, the evolution of mixture UV spectrum indicated that cylindrospermopsin was quickly transformed at least into one intermediate by-product. While mass spectrometry experiments confirmed that cylindrospermopsin was almost totally transformed within 5 min, chlorine was consumed up to 20 min after the beginning of the reaction with a rate of 5 mol per mol of toxin. Then, LC-MS analysis gave rise to the formation of a third cylindrospermopsin by-product in addition to 5-chloro-cylindrospermopsin and cylindrospermopsic acid previously identified. Thanks to the accurate mass measurement provided by the LTQ-Orbitrap mass spectrometer, this new and stable chlorination by-product was assigned the chemical formula C(13)H(18)N(4)O(7)S. On the other hand, both of the mitochondrial and lysosomal activities measured on Caco-2 cells revealed that cylindrospermopsin chlorination significantly decreases mixture cytotoxicity.

Impacts of climate change on surface water quality in relation to drinking water production

Besides climate change impacts on water availability and hydrological risks, the consequences on water quality is just beginning to be studied. This review aims at proposing a synthesis of the most recent existing interdisciplinary literature on the topic. After a short presentation about the role of the main factors (warming and consequences of extreme events) explaining climate change effects on water quality, the focus will be on two main points. First, the impacts on water quality of resources (rivers and lakes) modifying parameters values (physico-chemical parameters, micropollutants and biological parameters) are considered. Then, the expected impacts on drinking water production and quality of supplied water are discussed. The main conclusion which can be drawn is that a degradation trend of drinking water quality in the context of climate change leads to an increase of at risk situations related to potential health impact.

Occurrence and fate of pharmaceutical products and by-products, from resource to drinking water

Among all emerging substances in water, pharmaceutical products (PPs) and residues are a lot of concern. These last two years, the number of studies has increased drastically, however much less for water resources and drinking water than for wastewater. This literature review based on recent works, deals with water resources (surface or groundwater), focusing on characteristics, occurrence and fate of numerous PPs studied, and drinking water including water quality. Through this review, it appears that the pharmaceutical risk must be considered even in drinking water where concentrations are very low. Moreover, there is a lack of research for by-products (metabolites and transformation products) characterization, occurrence and fate in all water types and especially in drinking water.

Ms identification of microcystin-LR chlorination by-products

Drinking water disinfection by chlorine is known to reduce concentration of microcystin, but compounds formed are rarely considered. In this work the chlorination of microcystin-LR has been studied by monitoring reactants consumption and reaction products using the linear trap quad-Orbitrap (LTQ-Orbitrap) technology. Microcystin-LR was totally transformed within 2 min, meanwhile chlorine was consumed until 30 min with a rate of 12 mol per mol of toxin. Four new by-products of microcystin-LR were identified as well as their isomers: monochloro-microcystin, monochloro-dihydroxy-microcystin, dichloro-dihydroxy-microcystin and trichloro-hydroxy-microcystin. In addition, four new isomers were also observed, corresponding to the dihydroxy-microcystin already known. Besides, another compound previously observed was identified as monochloro-hydroxy-microcystin.

Fock-Darwin-like quantum dot states formed by charged Mn interstitial ions

We report a method of creating electrostatically induced quantum dots by thermal diffusion of interstitial Mn ions out of a p-type (GaMn)As layer into the vicinity of a GaAs quantum well. This approach creates deep, approximately circular, and strongly confined dotlike potential minima in a large (200 microm) mesa diode structure without need for advanced lithography or electrostatic gating. Magnetotunneling spectroscopy of an individual dot reveals the symmetry of its electronic eigenfunctions and a rich energy level spectrum of Fock-Darwin-like states with an orbital angular momentum component |lz| from 0 to 11.

Industry funding and the reporting quality of large long-term weight loss trials

BACKGROUND

Quality of reporting (QR) in industry-funded research is a concern of the scientific community. Greater scrutiny of industry-sponsored research reporting has been suggested, although differences in QR by sponsorship type have not been evaluated in weight loss interventions.

OBJECTIVE

To evaluate the association of funding source and QR of long-term obesity randomized clinical trials (RCT).

METHODS

We analysed papers that reported long-term weight loss trials. Articles were obtained through searches of Medline, HealthStar, and the Cochrane Controlled Trials Register between the years 1966 and 2003. QR scores were determined for each study based upon expanded criteria from the Consolidated Standards for Reporting Trials (CONSORT) checklist for a maximum score of 44 points. Studies were coded by category of industry support (0=no industry support, 1=industry support, 2=in kind contribution from industry and 3=duality of interest reported). Individual CONSORT reporting criteria were tabulated by funding type. An independent samples t-test compared the differences in QR scores by funding source and the Wilcox-Mann-Whitney test and generalised estimating equations (GEE) were used for sensitivity analyses.

RESULTS

Of the 63 RCTs evaluated, 67% were industry-supported trials. Industry funding was associated with higher QR score in long-term weight loss trials compared with nonindustry-funded studies (mean QR (s.d.): industry=27.9 (4.1), nonindustry=23.4 (4.1); P<0.0005). The Wilcox-Mann-Whitney test confirmed this result (P<0.0005). Controlling for the year of publication and whether the paper was published before the CONSORT statement was released in the GEE regression analysis, the direction and magnitude of effect were similar and statistically significant (P=0.035). Of the individual criteria that prior research has associated with biases, industry funding was associated with greater reporting of intent-to-treat analysis (P=0.0158), but was not different from nonindustry studies in reporting of treatment allocation and blinding.

CONCLUSION

Our findings suggest that the efforts to improve reporting quality be directed to all obesity RCTs, irrespective of funding source.

Fast characterization of non domestic load in urban wastewater networks by UV spectrophotometry

Urban wastewater treatment plant efficiency, as well as biosolid quality, depends on urban wastewater quality, which can be affected by non domestic discharges (industrial, commercial etc.). The characterization of wastewater quality and non domestic discharge is complex, expensive and time consuming. However, these discharges must be controlled and reduced if possible. The development of a simple and fast methodology, namely based on alternative methods such as UV spectrophotometry, has been carried out and applied to different areas of a medium sized town of Southern Québec (Canada). Several autosamplers and on line/on site measurements have been used in critical control points of the network areas, for a dry weather campaign in four areas (industrial, commercial, hospital and university). The flow rate study, completed by the exploitation of conductivity measurements and the qualitative examination of UV spectra allows the discrimination of non domestic loads and their variability study from one point to another. The identification of critical discharges and organic shock loads has been possible with low investment, and mitigation actions have been proposed.