Biomechanical effects of different staging and attachment designs in maxillary molar distalization with clear aligner: a finite element study

BACKGROUND

In the present study, the effects of distalizations of one and two molars with different step distances and attachment designs have been analyzed.

METHODS

A 3D finite element analysis model has been developed in order to determine the tendency of tooth displacement and stress distribution with clear aligner treatment.

RESULTS

Under the condition of single-molar distalization, when the step distance was set to 0.25 mm, the total displacement was 0.086 mm for central incisors, 0.080 mm for lateral incisors, 0.084 mm for canines, 0.102 mm for the first premolar and 0.076 mm for the second premolar. The von Mises stress of roots and the principal stress of the periodontal ligament was slightly lower than in the control group when the step distance was set to 0.130 mm. Under the condition of two-molar distalization, when the step distance was set to 0.130 mm, the total displacements for central incisors, lateral incisors and canines as well as both the first and second maxillary molars were basically the same as with a distance of 0.250 mm for one-molar distalization. In addition, when the step distance was 0.130 mm with two-molar distalization, the rotation center of the first and second molar was closer to the apex of the root indicating that the smaller step distance led to more bodily movement during the two-molar distalization. However, displacement tendencies of the first molar and the second molar were basically the same whether horizontal or vertical rectangular attachments were added.

CONCLUSIONS

A step distance of moving two molars to 0.130 mm can achieve the same reaction force on the anterior teeth as moving one molar 0.250 mm without effects on horizontal or vertical rectangular attachments.

CLINICAL RELEVANCE

Our results provide a theoretical basis and guidance for simultaneously moving two molars backward in clinical practice using a clear aligner.

Comparison of pleasant and unpleasant smile characteristics in the perception of the laypeople in an Iranian population

INTRODUCTION

This study aimed to compare the characteristics of pleasant and unpleasant smiles from the perception of laypeople.

METHODS

Two-hundred posed smile photographs were obtained from adult participants with no anomaly, restoration, or severe crowding and spacing in anterior teeth. Photographs were shown to 26 judges to give each photograph a score for attractiveness. Upper and lower quartiles for the most and least rated smiles were determined, and variables including gingival display, smile arc, midline deviation, buccal corridor, smile width, tooth rotation or malposition, diastema, upper and lower vermilion show, and tooth form were measured. Independent-sample t test and Pearson chi-square analysis were used to determine the differences between the pleasant and unpleasant groups for quantitative and qualitative variables, respectively. The linear regression model revealed variables with the most significant impact on the mean score.

RESULTS

All quantitative and qualitative variables except tooth form significantly differed between pleasant and unpleasant smile groups (P <0.05). The consonant smile arc was associated with an increase of 12.59% in mean scores compared with the inconsonant smile arc. Each tooth reported with malposition was correlated with a decrease of 9.37% in the scores. In the same way, each 1-mm increase in midline diastema and occlusal cant coincided with a drop of 8.73% and 3.59% in scores, respectively.

CONCLUSIONS

The results of this study suggested that smile arc, tooth malposition, midline diastema, and occlusal plane canting had the most impact on smile esthetics and should be given priority by orthodontists in the treatment plan of choice.

The Hyrax appliance with tooth anchorage variations in surgically assisted rapid maxillary expansion: a finite element analysis

PURPOSE

It is known that a correct transverse maxillary dimension is a key factor for a stable occlusion, which brings functional and esthetic benefits for the patient. In patients presenting maxillary atresia and the completion of bone growth, a highly recommended option for correction is the surgically assisted rapid maxillary expansion (SARME) associated with the Hyrax appliance. The objective of this study was to evaluate the influence of tooth anchorage variations of the Hyrax appliance in SARME through finite element analysis, evaluating which anchorage option might be associated with more effective orthopedic results with less undesired side effects.

METHODS

Five different dental anchoring conditions for the Hyrax appliance were simulated through FE analysis applying premolars and molars as anchorage, having the same force applied by the activation of the Hyrax screw (0.5 mm) in all groups. The maxillary displacement results (axes X, Y, and Z) and generated stresses for both teeth and maxillary bone were calculated and represented using a color scale.

RESULTS

All groups presented significant bone displacement and stress concentration on anchoring teeth, with the group presenting anchorage in the 1st and 2nd molars showing the greatest maxillary horizontal displacement (axis X) and suggesting the lowest tendency of dental vestibular inclination.

CONCLUSIONS

Variations in dental anchorage might substantially affect the maxillary bone and teeth displacement outcome. The protocol for the Hyrax apparatus in SARME applying the 1st and 2nd molars as anchorage might generate less tilting and inclination of the anchoring teeth.

Effects of twin-block appliance on upper airway parameters in OSA children with class II malocclusion and mandibular retrognathia: a CBCT study

Twin-block appliance had been advocated as a potential treatment option in paediatric obstructive sleep apnoea (OSA) due to their favourable effect in enhancing upper airway parameters and improving OSA symptoms. The aim of this study was to evaluate the effect of twin-block appliance therapy on upper airway parameters/dimensions and the apnoea-hypopnea indexes (AHIs) in OSA children with class II mandibular retrognathic skeletal malocclusion using cone-beam computed tomography. This prospective longitudinal study comprised 34 polysomnography-proven OSA growing children with class II mandibular retrognathic skeletal malocclusion between the ages of 8 and 12 years who had completed myofunctional twin-block therapy and matched corresponding controls. The upper airway was segmented into the nasopharynx, oropharynx, and hypopharynx, and the effect of twin-bock treatment on upper airway parameters/dimensions was assessed pre- and posttreatment using CBCT analysis, while a second standard overnight PSG was performed to determine changes in the AHI. At the nasopharynx level, minimal (nonsignificant) increases in all variables were observed within the twin-block group and between the groups (P > 0.05). At the level of the oropharynx, all variables increased significantly in the treatment group and between groups (P < 0.001), but these increases were nonsignificant in the control group. At the level of the hypopharynx, only the minimum cross-sectional area (MCA) increased significantly in the treatment group (P = 0.003). The change in MCA was also significant between the groups (P = 0.041). In addition, the upper airway length increased significantly in the twin-block group (P = 0.0154), and the AHI decreased by 74.8% (P < 0.001).

CONCLUSION

Correction of class II mandibular retrognathic skeletal malocclusion with twin-block appliance resulted in a significant increase in upper airway volume, MCA, anteroposterior and lateral distances of the MCA at the level of the oropharynx, MCA at the level of the hypopharynx and upper airway length, and a significant decrease in AHI, but it had no effect on nasopharynx parameters.

WHAT IS KNOWN

• CBCT imaging has been shown to be an effective and precise diagnostic tool for analyzing the upper airways and craniofacial structures. • Twin block appliance may be an effective treatment modality in children with OSA.

WHAT IS NEW

• Minimal cross-sectional area of upper ways may be the most relevant potential parameter when explaining how the upper airway anatomy plays role of in the pathogenesis of pediatric OSA. • Twin block appliance induced favorable changes in upper airway morphology (oropharynx area mainly) and respiratory parameters in OSA children with class II malocclusion.

Using a digital platform to establish odontometric variation based on race, gender and Angle classification

Orthodontists often encounter significant clinical challenges in the finishing stages of treatment due to a disproportion in interarch tooth size relationships. Despite the increasing presence of digital technology and concomitant focus on customized treatment approaches, there is a gap in the knowledge of how generating tooth size data using digital versus traditional methods may impact our treatment regime.

OBJECTIVE

This study aimed to compare the prevalence of tooth size discrepancies using digital models and a digitally based cast analysis in our cohort based on (i) Angle's Classification; (ii) gender and (iii) race.

MATERIALS AND METHODS

The mesiodistal widths of teeth in 101 digital models were assessed using computerized odontometric software. A Chi-square test was used to determine the prevalence of tooth size disproportions among the study groups. The differences between all three groups of the cohort were analysed using a three-way analysis of variance (ANOVA).

RESULTS

An overall Bolton tooth size discrepancy (TSD) prevalence of 36.6% was observed in our study cohort; 26.7% had an anterior Bolton TSD. No differences existed in the prevalence of tooth size discrepancies between male and female subjects as well as between the different malocclusion groups (P > .05). Caucasian subjects had a statistically significant smaller prevalence of TSD compared to Black and Hispanic patients (P < .05).

CONCLUSION

The prevalence results in this study illuminate how relatively common TSD is and underscores the importance of proper diagnosis. Our findings also suggest that racial background may be an influential factor in the presence of TSD.

Comparison of upper and lower lip position, length and thickness in sagittal and vertical malocclusion

This study aimed to compare the upper and lower lips position, length, and thickness in different malocclusions, in randomly selected 180 patients' pre-treatment lateral cephalograms. The subjects were grouped sagittally by using Steiner's analysis and Wits appraisal and vertically based on Frankfort horizontal and mandibular plane (FHMP) angle and lower facial height. One-way ANOVA was applied to compare the upper and lower lip positions, thickness, and length in sagittal and vertical malocclusion and independent sample T test was applied for comparison between genders among soft tissue variables. Post-hoc Dunnett T3 was performed for comparison of lip variables in adjacent malocclusion groups. The level of significance was not less than or equal to 0.05. The anteroposterior position of the upper and lower lips with respect to E and S planes and upper and lower lip thickness varied significantly (p < 0.05) in all classes of sagittal malocclusion, whereas the anteroposterior (AP) position of the LL with respect to both planes and UL length between vertical malocclusion groups was statistically significant (p < 0.05). AP position and fullness of both lips have a significant association with sagittal malocclusion, whereas the AP position of the lower lip's and the length of upper lip is significantly associated with vertical malocclusion.

Does surgical treatment of mandibular condyle head (diacapitular) fractures provide better outcomes than closed treatment? - a systematic review and meta-analysis

The choices for managing a condylar head fracture (CHF) of the mandible are either open surgical or closed functional treatments (CFT) and the decision depends on various factors. The purpose of this systematic review was to ascertain from the available literature whether the open method or CFT yields better outcomes in managing CHF. We have systematically reviewed published articles according to the PRISMA statement. The search was conducted in PubMed, Google Scholar, Semantic Scholar, and the Cochrane Library database for comparative studies about both open and closed treatments from inception until April 2023. The outcomes of interest were mouth opening (MO), protrusion, laterotrusion, postoperative pain, and malocclusion. Eight studies met the inclusion criteria. The review comprised of 326 cases, among which 177 were managed by open methods and 149 were treated by CFT. The incidence of postoperative malocclusion and pain were significantly less in the open group. MO was better in the open treatment group although this was not statistically significant. Protrusion and laterotrusion occurred slightly more in CFT, although these were also statistically not significant. Overall, meta-analysis favoured open methods of managing CHF. Although enough evidence exists for the use of open methods for selected condylar head fractures, CFT still demonstrated favourable outcomes in undisplaced fractures. The selection of a particular treatment method should be individualised on the basis of each particular case considering the risk/benefits. Further high quality randomised trials are needed to establish a therapeutic guideline.

Finite element analysis of two skeletally anchored maxillary molar distalisation methods

OBJECTIVE

To compare two methods of maxillary molar distalisation with skeletal anchorage using finite element analysis (FEA).

METHODS

Two digitised models were created: the miniscrew-anchored distaliser, which consisted of a distalisation method anchored in a buccal miniscrew between the first molar and second premolar (Model 1), and the miniscrew-anchored palatal appliance, which consisted of a distalisation method anchored in a miniscrew on the anterior region of the palate (Model 2). FEA was used to simulate both methods, assessing teeth displacements and stress concentration.

RESULTS

The miniscrew-anchored distaliser showed greater buccal than distal displacement of the first molar, while the opposite was observed in the miniscrew-anchored palatal appliance. The second molar responded similarly in the transverse and anteroposterior perspectives with both appliances. Greater displacements were observed at crown level than in apical regions. Greater stress concentration was observed at the buccal and cervical regions of the crown in the miniscrew-anchored distaliser and the palatal and cervical regions in the palatal appliance. The stress progressively spread in the buccal side of the alveolar bone for the miniscrew-anchored distaliser and in the palatal root and alveolar bone for the palatal appliance.

CONCLUSION

FEA assumes that both appliances would promote maxillary molar distalisation. A skeletally anchored palatal distalisation force seems to provide a greater molar bodily movement with less undesirable effects. Greater stress is expected at the crown and cervical regions during distalisation, and the stress concentration in the roots and alveolar bone depends directly on the region the force was applied.

Mandibular Involvement Associated With Segmental Odontomaxillary Dysplasia: A Case Series

Segmental odontomaxillary dysplasia (SOD) is an uncommon and likely underrecognized developmental condition. In rare cases, SOD can also result in anomalies of the ipsilateral mandibular alveolar process and teeth. This report presents two cases of SOD with mandibular involvement to highlight this potential variation in SOD presentation. These cases help shed new light on our understanding of the disease mechanism and pathoetiology, while also informing clinicians to be diligent in imaging the ipsilateral mandible for dental anomalies in their patients with SOD. Based on the involvement of both jaws, the name change to 'segmental ipsilateral odontognathic dysplasia' is justified to better reflect its pathophysiology.

Abnormal basic visual processing functions in binocular fusion disorders

Heterophoria is a common type of binocular fusion disorder that consists of a latent eye misalignment with potential consequences on daily activities such as reading or working on a computer (with CVS). Crowding, a type of contextual modulation, can also impair reading. Our recent studies found an abnormal pattern of low-level visual processing with larger perceptive fields (PF) in heterophoria. The PF is the fundamental processing unit of human vision and both masking and crowding depend on its size. We investigated how heterophoria would impact the PF's size via a lateral masking experiment and consequently affect the foveal crowding at different letter-spacings (the crowding zone). More specifically, we explored the relationship between crowding, lateral masking, the PF's size, and the amount of heterophoria. The binocular horizontal PF's size was larger with heterophoric subjects, in agreement with our previous study. We found a stronger crowding and an extended crowding zone associated with slower response times; this shows that the processing of letter identification under both crowded and uncrowded conditions requires more processing effort in heterophoric individuals. In agreement with previous studies, we found a correlation between the crowding zone and the PF's size; each was strongly correlated with the amount of phoria. These findings resemble those involving the PF size and the extended crowding found at the fovea in amblyopia and young children. We suggest that these findings could help explain the inter-observers' variability found in the masking literature, and the reading difficulties often encountered in subjects with high heterophoria.

MIH and compromised permanent first molars. When and which teeth to extract: guidelines

Introduction

The prevalence of molar incisor hypomineralisation (MIH), the degree of severity of experienced molars, their medium-term survival rate are factors that have reintroduced the decision to extract first permanent molars, forced extractions or chosen therapeutic option.

Material and method

The author summarizes pedodontic and orthodontic clinical studies in the management of patients with compromised first permanent molars in order to analyze the consequences of single or multiple extractions of these teeth.

Results

Firstly, the consequences of extractions of the first permanent molars in the absence of malocclusion are studied. The goal is the establishment of all the teeth without orthodontic treatment. The impact of the age at which the extraction is practiced is a key factor. In a second step, extractions of first permanent molars in the presence of orthodontic anomalies are analyzed to define the optimal therapeutic strategies, the precautions during these treatments, the contraindications. Consultation and good coordination between the generalist dentist / pediatric dentist and orthodontist are the key factors for stable and functional end-of-treatment results and optimized treatment duration.

Discussion

Clinical experience and knowledge make it possible to properly select patients qualified for these therapies who obtain multidisciplinary planning and good biomechanical control.

Conclusion

By bringing together optimal decision-making conditions, extraction is a therapeutic option that often proves to be superior to a restorative option in providing our patients with the greatest long-term service.

Implant-supported canine retraction using different reactivation intervals of elastomeric chains: A CBCT-based split-mouth randomized controlled trial

INTRODUCTION

Orthodontists attempt to maximize treatment efficiency regarding time, tooth position and adverse effects. A new approach, not yet explored, is the activation frequency.

OBJECTIVE

The aim of this split-mouth randomized controlled trial was to evaluate the effect of reactivation intervals on the efficiency of tooth movement.

METHODS

Thirty eight patients having a Class I malocclusion with bimaxillary dentoalveolar protrusion or severe crowding, Class II with mandibular deficiency or Class III, requiring first premolar extraction and canine retraction were recruited. Elastomeric chains producing 150g were replaced every two, four, six or eight weeks. There were 36, 37, 36, and 36 quadrants randomly allocated to these groups, respectively. The canine retraction rate was the primary outcome. Canine tipping, rotation, and root resorption and pain were the secondary outcomes. Only the outcome assessors were blinded to group assignment.

RESULTS

The average total movement for the 6 months was 5.14, 5.31, 2.79 and 3.85 mm for the two-week, four-week, six-week and eight-week reactivation intervals, respectively. Root resorption was significantly higher in the two-week and four-week groups. No adverse events were observed.

CONCLUSION

The canine retraction rate, tipping, rotation and pain were similar in 2, 4, 6 and 8-week activation intervals groups. Longer reactivation intervals show less root resorption. The trial protocol was not pre-registered. The study was self-funded.

Cephalometric comparison of mandibular growth in Brazilian children with Class II malocclusion and normal occlusion during the growth stages determined by the cervical vertebrae maturation

OBJECTIVE

This study compared mandibular growth in children, aged 7 to 12 years, with Class II malocclusion and normal occlusion, between the following stages of cervical vertebrae maturation: initiation (I), acceleration (A), transition (T).

MATERIAL AND METHODS

A total of 148 lateral cephalograms (78 males, 70 females) of Class II malocclusion patients, and 60 lateral cephalograms (30 males, 30 females) of normal occlusion patients were included. The following linear cephalometric measurements were performed: Co-Gn (effective mandibular length), Co-Go (ramus height), and Go-Gn (length of mandibular body). Mean values of increments between stages (I-A, A-T, I-T) were obtained for each group and gender. Results were compared using the Student t-test, and a significance level of 0.05% was adopted.

RESULTS

Females group: A-T interval presented a greater increment in Co-Go in the Class II group, which was not significant for the I-T interval, with numerically smaller increments in Co-Gn and Go-Gn, without statistical significance. Males group: intervals I-A, A-T and I-T showed numerically smaller growth increments in the Class II group, with statistical significance for Co-Gn in I-A (p=0.001) and I-T (p=0.003). Comparing genders of the Class II group, Co-Go was higher in males (p=0.002) and I-T interval (p=0.031). In the Normal Occlusion group, the male gender had the greatest Co-Gn (p=0.038) for the I-A interval. In A-T and I-T, Co-Go in males was higher, with statistical significance (p=0.000 and p=0.002, respectively).

CONCLUSION

Growth phenomenon affects the mandibular dimensions regardless of the character of the malocclusion, with a tendency to be smaller in the presence of Class II malocclusion.

The in vitro biomechanics of anterior arch expansion using fixed lingual appliances with coil springs or archwire stops

INTRODUCTION

The presented study investigates differences in the biomechanics of straight and mushroom fixed lingual appliances when implementing coil springs and stops for anterior arch expansion.

MATERIALS AND METHODS

An in vitro orthodontic simulator was used to measure three-dimensional forces and moments on each tooth of a simulated maxillary arch. Mushroom and straight archwire forms of 0.016″ NiTi round archwire were considered, using 0.010″ × 0.030″ NiTi open coils and 0.016″-0.018″ archwire stops (n = 44 per group). Teeth in the anterior dental arch were moved from a neutral to crowded position to replicate anterior crowding of central and lateral incisors. Forces and moments of interest for lateral incisors and first premolars were compared using repeated measures mixed multivariate analysis of variance (α = 0.05).

RESULTS

Three comparisons between straight versus mushroom archwires and two comparisons of coil springs vs. stops were not statistically significant. Overall, it was found that the use of a straight lingual archwire produced larger differences in forces and moments between using stops and coil springs than when using a mushroom archwire. Using stops produced larger forces and moments for both types of archwires as compared to using coil springs. The largest expansion forces were produced using straight archwires with stops, exceeding 3.0 N of force. Straight archwires with coil springs produced the lowest expansion forces on lateral incisors, just exceeding 1.5 N.

CONCLUSIONS

The findings of this study have elucidated significant differences in the biomechanics of transverse arch expansion using straight or mushroom fixed lingual appliances with coil springs or stops.

Two-phase orthodontic treatment of a patient with a low-angle skeletal class II malocclusion: a 7-year follow-up

Low-angle skeletal class II malocclusions are often observed with sagittal and vertical developmental abnormalities of the mandible. Two-phase orthodontic treatment of functional orthopedic therapy combined with fixed correction is one of the most common methods to treat of skeletal class II malocclusions. This case report describes the two-phase orthodontic treatment of a patient with severe low-angle skeletal class II malocclusion. A Twin Block orthodontic appliance was used to improve mandibular growth, and the adjustment of the occlusal relationship using a fixed appliance after functional therapy. After treatment, a significant improvement was observed in the patient's facial appearance and occlusal relationship. Additionally, a 7-year follow-up confirmed the stability of the treatment results. Although a vertical facial growth direction is difficult to control, the Twin Block orthodontic appliance in adolescents might effectively improve the difference in the sagittal growth of the mandible. Whilst the growth pattern could not be fully controlled, the treatment significantly improved the patient's facial profile and occlusion.

Three-dimensional evaluation of social smile asymmetry in patients with unilateral impacted maxillary canine: a 3D stereophotogrammetry study

OBJECTIVE

This study aimed to evaluate social smile asymmetry in patients with unilateral impacted maxillary canine on 3D stereophotogrammetric images.

MATERIAL AND METHODS

The 3D social smile images of participants with unilateral impacted maxillary canine (n:20) and without impaction as a control group (n:20) were included. The images were recorded with a hand-held 3D stereophotogrammetry device (Fuel3D® Scanify®) and Geomagic Essentials 2 reverse engineering software were used for analyses. After the orientation process of the 3D records, the tissues around the smile area were divided into five morphological regions: cheek, upper lip lateral and medial, and lower lip lateral and medial. The deviation margins in the negative and positive directions for the 95% mesh rate and the total percentages of meshes between - 0.5- and + 0.5-mm deviations were calculated. ICC, paired samples t test, independent samples t test, and the Mann-Whitney U test were used for statistical analyses.

RESULTS

In individuals with impacted canine, the amount of maximum positive deviation in the upper lip medial was 5.64 mm ± 1.46 and maximum negative deviation was - 4.6 mm ± 1.17. In the control group, mean of deviation limits for all parameters was less than 1.19 mm ± 2.62, while in individuals with unilateral impacted maxillary canine, the maximum value was 8.34 mm ± 2.23. The mesh percentage between - 0.5 and 0.5-mm deviations was over 95% in all morphological areas in the control group, while in the impacted canine group, the number of meshes within the specified deviation limits was less than 95%.

CONCLUSION

Individuals with unilateral impacted maxillary canine exhibit greater asymmetry in social smile compared to the control group, with the asymmetry being most prominent near the corners of the mouth and cheeks.

CLINICAL RELEVANCE

Amount of asymmetry was higher in impaction group compared to the control group in social smile. The quantification of a possible smile asymmetry due to the impacted canine is crucial for the diagnosis and treatment planning of orthodontic and/or orthognathic cases for ideal aesthetic results. Hence, smile asymmetry should not be overlooked and should be considered in diagnosis and treatment planning.

A 3-dimensional evaluation of available retromolar space for the application of ramal plates

INTRODUCTION

This study aimed to evaluate the available retromolar space for ramal plates in patients with Class I and III malocclusions and compare that space with and without third molars using cone-beam computed tomography.

METHODS

Cone-beam computed tomography images of 30 patients (17 males, 13 females; mean age, 22.2 ± 4.5 years) with Class III malocclusion and 29 subjects (18 males, 11 females; mean age, 24.3 ± 3.7 years) with Class I malocclusion were analyzed. Available retromolar space at 4 axial levels of the second molar root and the volume of the retromolar bone were evaluated. Two-way repeated measures analysis of covariance (repeated measures analysis of covariance) was applied to compare the variables between Class I and III malocclusions and the presence of third molars.

RESULTS

Patients with Class I and III relationships showed up to 12.7 mm of available retromolar space at 2 mm apical from the cementoenamel junction (CEJ). At 8 mm apical from CEJ, patients with Class III malocclusion had 11.1 mm of space, whereas those with a Class I relationship showed 9.8 mm of available space. When patients had third molars, the amount of available retromolar space was significantly greater in patients with a Class I and III relationship. However, patients with Class III malocclusion exhibited greater available retromolar space than those with a Class I relationship (P = 0.028). In addition, the bone volume was significantly greater in patients with Class III malocclusion than in patients with a Class I relationship and those with third molars than in those without them (P <0.001).

CONCLUSIONS

Class I and III groups showed the availability of at least 10.0 mm of retromolar space 2 mm apical to the CEJ for molar distalization. Based on this information, it is suggested that clinicians consider available retromolar space for molar distalization in diagnosing and planning treatment for patients with Class I and III malocclusion.

Timing of early correction of mandibular hypoplasia in skeletal class II malocclusion: a review

Skeletal Class II malocclusion is a common malocclusion seen in clinics. It is characterized by maxillary protrusion and mandibular retrognathia and has a high incidence in adolescent mixed dentition and early permanent dentition. The early functional correction has achieved some clinical results in treating skeletal Class II malocclusion with mandibular hypoplasia. During treatment, the timing of correction is the key factor in determining the therapeutic effect, although it is difficult to understand. This review focuses on the timing of early correction of mandibular hypoplasia in combination with relevant assessment indicators and historical literature from four perspectives-the law of mandibular growth and development, the necessity of early treatment, the timing of early treatment, and the determination of the peak period of mandibular growth and development-to provide a theoretical reference for the timing of the treatment of clinical skeletal Class II malocclusion. This review shows that skeletal Class II mandibular growth has different characteristics in males and females. Bone growth assessment before treatment helps diagnose mandibular developmental morphology and the timing of early correction in adolescents with skeletal Class II malocclusion and hypoplasia of the mandible.

Oropharyngeal complex differences related to sex and occlusal factors in adolescents aged 12-17 years

OBJECTIVE

To investigate oropharyngeal complex differences related to sex and occlusal factors in adolescents.

METHODS

A cross-sectional study was conducted with 108 patients aged 12-17 years. The oropharyngeal complex was evaluated by imaging exams. Occlusal variables included molar relationship, facial growth pattern, maxilla shape, tooth loss, anterior crossbite, and anterior open bite. Statistical analysis included independent t-test, Mann-Whitney, ANOVA, and Kruskal-Wallis tests. The significance level was 5%.

RESULTS

There were increases of the tongue measurement (p = 0.026) and the hyoid approach at the base of the mandible among boys (p = 0.016) and the distance from the hyoid at the base of the mandible among girls (p = 0.039). There was shortening of the soft palate measurements (p = 0.003 and p = 0.007) and tongue (p = 0.018) among adolescents with an anterior crossbite.

CONCLUSION

Findings suggest sex, age, and anterior crossbite can be related to oropharyngeal morphology.

Geometric analysis of tooth size among different malocclusion groups in a Hispanic population

INTRODUCTION

Tooth size ratio is important for optimal dentofacial esthetics, occlusal interdigitation, and postorthodontic treatment stability. Tooth geometry influences tooth size ratio; therefore, tooth size normative data may not be practical across diverse ethnic groups. This study aimed to determine whether there are significant differences in 3-dimensional tooth size among patients in the Hispanic population with Angle Class I, II, and III malocclusions.

METHODS

The data were collected using intraoral scanned orthodontic study models representing Hispanic orthodontic patients with Angle Class I, II, and III malocclusions. The scanned models were digitized and transferred to a geometric morphometric system. Tooth sizes were determined, quantified, and visualized using contemporary geometric morphometric computational tools.

RESULTS

Tooth size was determined for all teeth and showed a significant difference in 4 out of 28 teeth: Maxillary right first molar, mandibular left second molar, mandibular right first molar and mandibular right second molar. This significant difference was noted among females and affected different malocclusion groups.

CONCLUSIONS

Tooth size discrepancy in the Hispanic population varies among malocclusion groups, and the variation is determined by the participant's gender.

Long-term morphometric changes in the anterior alveolar bone in adolescents and adults after space closure: A retrospective study

OBJECTIVES

To analyse the morphometric changes in the anterior alveolar bone of both the maxilla and mandible after space closure and retention for 18-36 mo in adults and adolescents.

MATERIALS AND METHODS

Forty-two subjects with 4 first premolars extracted followed by retracting anterior teeth were included and divided into two age groups: adult group (4 males, 17 females, mean age: 23.67 ± 5.29 y, treatment duration: 27.95 mo, retention duration: 26.96 mo, ANB: 4.8 ± 2.1, U1-L1: 117.2 ± 9.2, U1-PP: 120.2 ± 7.2, L1-MP: 99.2 ± 5.3) and adolescent group (6 males, 15 females, mean age: 11.52 ± 1.21 y, treatment duration: 26.18 mo, retention duration: 25.79 mo, ANB: 5.2 ± 2.1, U1-L1: 116.0 ± 8.6, U1-PP: 119.8 ± 4.9, L1-MP: 99.7 ± 4.9). Alveolar bone height and thickness of anterior teeth in both groups were measured using cone beam computed tomography (CBCT) imaging performed at the pretreatment (T1), posttreatment (T2) and retention phases (T3). One-way repeated-measure ANOVAs were performed to evaluate the alveolar bone changes. Voxel-based superimpositions were performed to measure the amount of tooth movement.

RESULTS

After orthodontic treatment, the lingual bone height and thickness of both arches and the labial bone height of the mandible decreased significantly in both age groups (P < .05). Most of the labial bone height and thickness of the maxilla in both groups remained unchanged (P > .05). After retention, the lingual bone height and thickness increased significantly in both age groups (P < .05). The amounts of increased height ranged from 1.08 to 1.64 mm in adults and from 0.78 to 1.21 mm in adolescents, and the amounts of increased thickness ranged from 0.23 mm to 0.62 mm in adults and from 0.16 mm to 0.36 mm in adolescents. Obvious movements of the anterior teeth during retention were not found (P > .05).

CONCLUSIONS

Although lingual alveolar bone loss occurred in adolescents and adults during orthodontic treatment, continuous remodelling occurred in the later retention phase, which provides a reference for clinical treatment planning of bimaxillary dentoalveolar protrusion.

Effect of pre-orthodontic trainer treatment on the masticatory and perioral muscles in patients with class II subdivision 1 malocclusion evaluated by surface EMG

INTRODUCTION

Myofunctional appliances have been shown to have a positive effect on the muscles in the facial area. Surface electromyography (sEMG) is one of the reliable methods used to investigate these effects.

A Periodontal Perspective on the Successful Treatment of Recurrent Benign Gingival Lesions Affecting the Anterior Dentition: Two Case Reports

Recurrent benign gingival lesions occurring in the anterior dentition are clinical dilemmas. While complete removal of such lesions is required to prevent recurrence, this can result in a poor esthetic outcome. Relative to this conundrum, this report discusses the diagnosis, psychologic management, and clinical treatment of two patients with recurring lesions on the facial gingiva of the mandibular and maxillary incisors, respectively. Patient A, a 55-year-old woman, presented with a recurrent peripheral ossifying fibroma (POF); Patient B, a 76-year-old man, presented with a recurrent pyogenic granuloma (PG). Both patients underwent multiple procedures and were ultimately treated without lesion recurrence. The efficacious surgical treatment of recurrent gingival lesions like POF and PG requires an aggressive approach involving lesion removal of the lesion as well as a 1.0- to 2.0-mm margin of normal tissue, underlying alveolar bone, and associated periodontal ligament (PDL). The rationale for this approach stresses the potential periodontal and esthetic ramifications that were considered. In summary, when recurrent benign gingival lesions are localized to the anterior part of the mouth, the approach to their surgical removal should be modified to minimize the extent of gingival recession and other potential esthetic issues.

Evaluation of the mandibular condyles trabecular structure in patients with severe class III pattern: a computed tomography (CT) fractal analysis study

Class III malocclusion is a combination of dental and skeletal disorders that causes discrepancies in occlusion. Malocclusion can affect the structure of the Temporomandibular joint (TMJ) resulting in many problems, one of which is affecting the internal structure of the bone. This study aimed to examine the morphological features of class III patients' trabecular structure of the mandibular condyle in comparison with normal class I individuals using fractal analysis (FA). To study the internal structure of the mandibular condyle bone, Computed Tomography (CT) scans of 45 severe class III patients (age: 16-46) who were the candidates for orthognathic surgery were selected and matched by age and sex with 45 normal class I individuals. The trabecular bone structure of the left and right mandibular condyles in three CT planes of the study group and control group were evaluated employing the FA. The result of the present study indicated that the fractal dimensions (FD) values of class III patients were lower than those of the normal class I individuals in axial (class I: 1.31 ± 0.02, class III: 1.28 ± 0.02), sagittal (class I: 1.25 ± 0.03, class III: 1.19 ± 0.08), and coronal (class I: 1.5 ± 0.06, class III: 1.45 ± 0.07) planes (P < 0.001). There were no significant differences between the FD values of the males and females. The intra-group evaluation revealed that there was no correlation between age and FD values. No evidence of laterality was found regarding the FD values of the right and left condyles. Given the noticeable differences between the FD values, it can be implied that severe class III malocclusion may affect the trabecular pattern of the cancellous bone of the mandibular condyle compared to class I individuals. Therefore, due to the altered trabecular structure, clinicians should be cautious when planning treatments for these patients.