Production of gaseous radiotracers for industrial applications

This paper describes prerequisite tests, analysis and the procedure for irradiation of gaseous targets and production of gaseous radioisotopes i.e. argon-41 ((41)Ar) and krypton-79 ((79)Kr) in a 100MWTh DHRUVA reactor located at Bhabha Atomic Research Center (BARC), Trombay, Mumbai, India. The produced radioisotopes will be used as radiotracers for tracing gas phase in industrial process systems. Various details and prequalification tests required for irradiation of gaseous targets are discussed. The procedure for regular production of (41)Ar and (79)Kr, and assay of their activity were standardized. Theoretically estimated and experimentally produced amounts of activities of the two radioisotopes, irradiated at identical conditions, were compared and found to be in good agreement. Based on the various tests, radiological safety analysis and standardization of the irradiation procedure, necessary approval was obtained from the competent reactor operating and safety authorities for regular production of gaseous radiotracers in DHRUVA reactor.

Gene expression changes in damaged osteoarthritic cartilage identify a signature of non-chondrogenic and mechanical responses

OBJECTIVES

Joint degeneration in osteoarthritis (OA) is characterised by damage and loss of articular cartilage. The pattern of loss is consistent with damage occurring only where the mechanical loading is high. We have investigated using RNA-sequencing (RNA-seq) and systems analyses the changes that occur in damaged OA cartilage by comparing it with intact cartilage from the same joint.

METHODS

Cartilage was obtained from eight OA patients undergoing total knee replacement. RNA was extracted from cartilage on the damaged distal medial condyle (DMC) and the intact posterior lateral condyle (PLC). RNA-seq was performed to identify differentially expressed genes (DEGs) and systems analyses applied to identify dysregulated pathways.

RESULTS

In the damaged OA cartilage, there was decreased expression of chondrogenic genes SOX9, SOX6, COL11A2, COL9A1/2/3, ACAN and HAPLN1; increases in non-chondrogenic genes COL1A1, COMP and FN1; an altered pattern of secreted proteinase expression; but no expression of major inflammatory cytokines. Systems analyses by PhenomeExpress revealed significant sub-networks of DEGs including mitotic cell cycle, Wnt signalling, apoptosis and matrix organisation that were influenced by a core of altered transcription factors (TFs), FOSL1, AHR, E2F1 and FOXM1.

CONCLUSIONS

Gene expression changes in damaged cartilage suggested a signature non-chondrogenic response of altered matrix protein and secreted proteinase expression. There was evidence of a damage response in this late OA cartilage, which surprisingly showed features detected experimentally in the early response of cartilage to mechanical overload. PhenomeExpress analysis identified a hub of DEGs linked by a core of four differentially regulated TFs.

Chronic sensory-motor activity in behaving animals using regenerative multi-electrode interfaces

Regenerative peripheral nerve interfaces have been proposed as viable alternatives for the natural control and feel of robotic prosthetic limbs. We have developed a Regenerative Multi-electrode Interface (REMI) that guides re-growing axons through an electrode array deployed in the lumen of a nerve guide. While acute studies have shown the use of the REMI in the rat sciatic nerve, the quality of chronic signal recording has not been reported. Here we show that implantation of this interface in the sciatic nerve is stable with high quality recordings up to 120 days and failures mainly attributable to abiotic factors related to pedestal detachment and wire breakage. We further tested the interfacing of REMI with fascicles of the sciatic nerve that primarily innervate muscles (tibial) and skin (sural). When implanted into the tibial nerve, bursting activity was observed synchronous to stepping. However, implantation of REMI into the sural nerve failed due to its small size. While fascicles smaller than 300 μm are a challenge for regenerative interfacing, we show that a modified REMI can be used in an insertion mode to record sensory signals from skin. In summary, the REMI represents an effective tool for recording firing patterns of specific axon types during voluntary movement, which may be used to improve the motor control and sensory feedback in closed loop control systems for robotic prosthesis.

Biomaterials and Fabrication to Optimise Scaffold Properties for Musculoskeletal Tissue Engineering

Tissue engineering has emerged as a promising scientific field potentially yielding in vitro developed tissue to replace degenerative or injured tissues in vivo, thus avoiding the donor site morbidity associated with reconstructive surgery. Integral to the process is the role of scaffolds and the biomaterials used to form them. This review explores the concept of scaffold based tissue engineering and design considerations. The scaffold needs to have certain mechanical and architectural properties, it needs to be biocompatible and biodegradable, and allow combination with bioactive molecules. We also discuss scaffolding techniques, different biomaterial options and fabrication technologies, and future areas of development.

Ventilation dependence of concentration metrics of Ultra-fine Particles in a coagulating household smoke

Role of Ultra-fine Particles (UFPs) in causing adverse health effects among large population across the world, attributable to household smoke, is being increasingly recognized. However, there is very little theoretical perspective available on the complex behavior of the UFP metrics with respect to controlling factors, such as ventilation rate and particle emission rate from the combustion sources. This numerical study examines through coagulation dynamics, the dependence of UFP metrics, viz., number (PN), mass (PM(0.1)) and surface area (PA(0.1)) concentrations below 0.1 μm diameter, on ventilation and the number emission rate from household smoke. For strong sources, the steady-state concentrations of these metrics are found to increase initially with increasing Air Exchange Rate (AER), reach a peak value and then decrease. Counter correlations are seen between UFP metric and PM(2.5) concentrations. The concepts of Critical Air Exchange Rate (CAER) and Half-Value Air Exchange Rate (HaVAER) have been introduced which indicate a feasibility of mitigation of PM(0.1) and PA(0.1), unlike PN, by ventilation techniques. The study clearly brings forth complex differential behavior of the three UFP metrics. The results are further discussed.

Size evolution of ultrafine particles: Differential signatures of normal and episodic events

The effect of fireworks on the aerosol number characteristics of atmosphere was studied for an urban mega city. Measurements were made at 50 m height to assess the local changes around the festival days. Apart from the increase in total number concentration and characteristic accumulation mode, short-term increase of ultrafine particle concentration was noted. Total number concentration varies an order of magnitude during the measurement period in which peak occurs at a frequency of approximately one per day. On integral scale, it seems not possible to distinguish an episodic (e.g. firework bursting induced aerosol emission) and a normal (ambient atmospheric changes) event. However these events could be differentiated on the basis of size evolution analysis around number concentration peaks. The results are discussed relative to past studies and inferences are drawn towards aerosol signatures of firework bursting. The short-term burst in ultrafine particle concentration can pose an inhalation hazard.

Unusal canal configuration in maxillary and mandibular second molars

This clinical article describes three different case reports of maxillary and mandibular second molars with the unusual anatomy of single root with a single canal and their endodontic management. An unusual case of bilateralism is observed in the first two cases in the form of single-rooted second mandibular molars in both the quadrant of the same patient. The presence of maxillary second molar with single root and single canal in the third case is unusual.

Structural and Magnetic Properties of Dilute Ca²⁺ Doped Iron Oxide Nanoparticles

Undoped and calcium substituted hematite (α-Fe₂O₃) nanoparticles are synthesized by surfactant-directed co-precipitation and post annealing method. The annealed nanoparticles were found to be in single phase in nature and crystallize in the rhombohedral structure with space group R3c as confirmed by Rietveld refinement of the X-ray diffraction (XRD) data. Average crystallite sizes are calculated to be 20 to 30 nm and 50 to 60 nm for the nanoparticles annealed at 400 and 600 °C respectively. Mössbauer spectra for all the nanoparticles could be fitted with a sextet corresponding to the single magnetic state of the iron atoms in its Fe³⁺ state in the hematite matrix. The FTIR and Raman spectra of all the samples correspond to specific modes of α-Fe₂O₃. UV-Vis spectra of annealed samples showed broad peaks in the range of 525-630 nm resulting from spin-forbidden ligand field transition together with the spin-flip transition among the 2t₂g states. The estimated band gap energies were in the range of 1.6 to 1.9 eV which are much lower than the reported values for nano hematite. From the room temperature magnetic hysteresis loop measurements, weak ferromagnetic behavior is observed in all undoped and Ca²⁺ doped hematite samples. Morin temperature (T(M)) is calculated to be 257 and 237 K for 1.45% doped samples with particle size 54 and 27 nm respectively. The sample with Ca content of 1.45 wt% when annealed at 400 °C showed that the particles were of different shapes which included both quasi spherical and rod shaped. On annealing the same sample at 600 °C, the nanorods collapsed to form bigger spherical and ellipsoidal particles.

Combined application of FBG and PZT sensors for plantar pressure monitoring at low and high speed walking

BACKGROUND

Clinical monitoring of planar pressure is vital in several pathological conditions, such as diabetes, where excess pressure might have serious repercussions on health of the patient, even to the extent of amputation.

OBJECTIVE

The main objective of this paper is to experimentally evaluate the combined application of the Fibre Bragg Grating (FBG) and the lead zirconate titanate (PZT) piezoceramic sensors for plantar pressure monitoring during walk at low and high speeds.

METHODS

For fabrication of the pressure sensors, the FBGs are embedded within layers of carbon composite material and stacked in an arc shape. From this embedding technique, average pressure sensitivity of 1.3 pm/kPa and resolution of nearly 0.8 kPa is obtained. These sensors are found to be suitable for measuring the static and the low-speed walk generated foot pressure. Simultaneously, PZT patches of size 10 × 10 × 0.3 mm were used as sensors, utilizing the d<formula>_{33}</formula> (thickness) coupling mode. A sensitivity of 7.06 mV/kPa and a pressure resolution of 0.14 kPa is obtained from these sensors, which are found to be suitable for foot pressure measurement during high speed walking and running. Both types of sensors are attached to the underside of the sole of commercially available shoes. In the experiments, a healthy male subject walks/runs over the treadmill wearing the fabricated shoes at various speeds and the peak pressure is measured using both the sensors. Commercially available low-cost hardware is used for interrogation of the two sensor types.

RESULTS

The test results clearly show the feasibility of the FBG and the PZT sensors for measurement of plantar pressure. The PZT sensors are more accurate for measurement of pressure during walking at high speeds. The FBG sensors, on the other hand, are found to be suitable for static and quasi-dynamic (slow walking) conditions. Typically, the measured pressure varied from 400 to 600 kPa below the forefoot and 100 to 1000 kPa below the heel as the walking speed varied from 1 kilometer per hour (kmph) to 7 kmph.

CONCLUSIONS

When instrumented in combination, the two sensors can enable measurements ranging from static to high speed conditions Both the sensor types are rugged, small sized and can be easily embedded in commercial shoes and enable plantar pressure measurement in a cost-effective manner. This research is expected to have application in the treatment of patients suffering from diabetes and gonarthrosis.

How better is random blinded re-checking results in revised national TB Control Programme, India?

BACKGROUND

The Revised National Tuberculosis Control Programme (RNTCP) is implementing the External Quality assurance (EQA) and Random blinded re-checking (RBRC) as one of its important component. This nationwide study was conducted to determine (1) the number and types of RBRC errors and (2) the sensitivity and specificity among rechecked slides.

MATERIALS AND METHODS

The study was based on the monthly RBRC reports submitted by ~13,000 designated microscopy centres (DMCs) across the country under routine programmatic settings in 2010. The DMCs reports were compiled at district, state and national level.

RESULTS

A total of 11, 89,564 slides were rechecked from 11,039 DMCs. Of which 99.5% of rechecked slides did not have any errors. The sensitivity and specificity of the rechecked slides had 98% sensitivity and 100% specificity.

CONCLUSION

RBRC is the crucial component of EQA and the results from the programme are found to be satisfactory. Based on the study findings, the earlier value of 80% sensitivity used for calculation of annual sample size for RBRC has been increased to 90% sensitivity. The annual RBRC sample size for DMCs has been increased by 1.5-2 folds.

Systematic review with meta-analysis: the association between the use of calcium channel blockers and gastrointestinal bleeding

BACKGROUND

Due to their potential anti-platelet effect, it is suggested that calcium channel blockers (CCBs) are associated with gastrointestinal bleeding (GIB). However, results from previous studies are conflicting.

AIM

To conduct a systematic review and meta-analysis of randomised controlled trials (RCTs) and observational studies to clarify the association between CCBs and GIB.

METHODS

We conducted a systematic search of PubMed, EMBASE, Cochrane library and Trial Register databases up to January 2015. Studies that evaluated exposure to CCBs reporting GIB outcomes were included in the meta-analysis. The inverse variance method with random effects model was used to calculate the pooled estimates.

RESULTS

Seventeen studies (four RCTs, eleven case-control and two cohort studies) were included in the meta-analysis. The summary risk ratio (RR) for GIB was 1.17 (95% CI 1.01-1.36) for CCB users vs. non-users. Subgroup analysis showed that CCB use was associated with a moderately higher risk of lower GIB (RR = 1.83, 95% CI 1.17-2.84) but not upper GIB. However, data from four RCTs did not support association between CCBs and GIB (RR = 0.93, 95% CI 0.82-1.05). Subgroup analyses further showed that the increased risk of GIB among CCB users was only observed in studies that failed to adjust for prior history of GIB (RR = 1.67, 95% CI 1.34-2.08) or use of anti-ulcer drugs (RR = 1.40, 95% CI 1.19-1.65).

CONCLUSION

Our meta-analysis showed a marginal association between calcium channel blocker use and the risk of gastrointestinal bleeding. This association is of dubious clinical significance, as the effects of different comparators or adjustment for confounding factors render this association nonsignificant.