Response of methanogenic granules enhanced by magnetite to ammonia stress

Excessive ammonia has an inhibitory effect on anaerobic granular sludge (AnGS) when treating industrial wastewater with high concentration of ammonia and organic matters. The addition of conductive materials has been widely reported to improve the AnGS activity, which has the potential to alleviate the ammonia inhibition. In this study, the addition of magnetite was carried out to enhance the activity of AnGS in UASB reactor, then the response of AnGS to different ammonia levels was investigated. Results showed that magnetite facilitated the enrichment of Methanosaeta and Clostridium sensu stricto 1. Under the ammonia stress (up to 5 g TAN/L), it was interesting that Methanosaeta was better retained (abundance of 45.8%), and the abundance of ammonia-resistant Clostridium sensu stricto 1 increased to 34.3% in presence of magnetite. RT-qPCR analysis revealed that Methanosaeta could maintain metabolically active for counteracting the ammonia inhibition along with the higher transcription of genes encoding for CO₂-dependent pathway. The electron transport activity and ATP content of AnGS were 1.25-2.12 and 1.23-2.56 folds higher than those in the control group, respectively. In addition, the AnGS could maintain the stability of structure because Methanosaeta was the skeleton of AnGS. As a result, the analysis of enzyme activity showed that the overall methanogenic metabolism was more active, thus ensured the effective operation of UASB reactor. This study provided the scientific understanding about the role of magnetite to alleviate the ammonia inhibition, and had important implications for stable treatment and recycling of industrial wastewater.

Recycled mesoporous magnetic composites with high surface area derived from plastic and de-oiled sludge wastes: An empirical comparison on their competitive performance for toxic Cr (VI) removal

The current study focused on the comparative removal of hexavalent chromium using two magnetically modified hybrid adsorbent composites. Their precursor chars were prepared from bio sludge and plastic waste derivatives. The coating of magnetite on the chars' surface was evident from the SEM micrographs. Infusion of magnetite nanoparticles in the native chars aided in the reduction of the composite particles' sizes, thus, forming high surface area composites. Screening of uptake capacities among various blends of char and magnetite were surveyed. Composites of both kinds with a 1:5 ratio of char: iron salts composition answered well. The pH_ZPC and zeta potential values of the composites indicated the neutral charge on the composites' surface. This suggested the need for a highly acidic environment for efficient Cr(VI) removal. Optimum economic conditions for Cr(VI) removal were obtained from the batch studies (solution pH - 1.5; contact time - (a) MPC [magnetic plastic char] - 60 min (b) MBC [magnetic biochar] - 40 min; temperature - 25 °C). The maximum monolayer adsorption capacity of MPC and MBC were found to be 84.67 mg/g and 53.83 mg/g respectively. Isotherm, kinetic and thermodynamic studies revealed the adsorption systems' inclination towards physisorption. From the characterization and modeling results, electrostatic force of attraction and pore filling was anticipated to be the mechanism of adsorption for both MPC and MBC. Thus, in the relative removal studies, MBC was found to compete better than MPC due to its enhanced porosity and surface area.

Simple and low-cost production of magnetite/graphene nanocomposites for heavy metal ions adsorption

It is challenging to produce economical magnetic graphene-based adsorbents on an industrial scale for heavy metal ions removal. Here, magnetite/graphene nanocomposite embedded in activated carbon matrix (magnetite/G-AC) was synthesized via in situ catalytic graphitization of iron-impregnated biochar to obtain graphene encapsulated iron nanoparticles (GEINs) embedded in biochar (BC) matrix, and followed by steam activation of GEINs-BC. Steam activation aimed to upgrade biochar to activated carbon with oxygen functional groups, crack encapsulated graphene shell to graphene nanosheets, and obtain magnetic Fe₃O₄ by oxidation of iron, thereby improving the adsorption capacity of magnetite/G-AC-800 (153.2 mg/g) four times higher than that of GEINs-BC. The parameters on the adsorption capacity were investigated using Pb(II) ions as a typical pollutant as a function of solution pH (3-7), contact time (5-300 min), initial Pb(II) concentration (50-400 mg/L), and adsorbent dosage (0.05-0.25 g). The fitted pseudo-second-order kinetic model and Langmuir model indicated that the main adsorption mechanism was chemical adsorption over monolayer. This research developed a low-cost magnetic adsorbent with the advantage of simple large-scale production and excellent adsorption capacity per unit cost for remediating wastewater.

Photosynthetic bacteria with iron oxide nanoparticles as catalyst for cooking oil removal and valuable products recovery with heavy metal co-contamination

Waste cooking oil discharge causes environmental pollution in receiving waters, particularly when associated with heavy metals that can lead to formation of hazardous organometallic compounds. This study combined iron oxide nanomaterial and the anoxygenic photosynthetic bacterium Rhodopseudomonas faecalis PA2 for removal of cooking oil in the presence of heavy metals. R. faecalis PA2, with known capability to generate beneficial substances from several wastes, was capable of cooking oil removal with production of valuable products. Oil removal, biomass, protein, and carotenoid production were 82.38%, 1.48 g/L, 1,600.19 mg/L, and 1,046.33 mg/L, respectively, under optimal conditions (cooking oil as carbon source and 30% inoculum density). Iron (Fe) stimulates growth of R. faecalis; in this study, Fe₃O₄ nanoparticles were synthesized and used as a catalyst to facilitate interaction and high reactivity between Fe and R. faecalis PA2. Size measurement by transmission electron microscopy (17.44 nm), X-ray diffraction peaks, and magnetic susceptibility confirmed that the synthesized nanoparticles were magnetite Fe₃O₄. Biomass, protein, and carotenoid production of the Fe₃O₄ supplemented experiment increased by 61.56%, 70.78%, and 57.2%, respectively, when compared with the control. When different concentrations of heavy metals (Pb, Ni, Co, and Zn) were supplemented in the media containing cooking oil, Fe₃O₄ addition increased heavy metal tolerance, improved bacterial growth, and enhanced valuable products when compared with the non-supplemented group. This study reports the positive impact of nanoparticle application as a catalyst for valorization of cooking oil waste with heavy metal co-contamination by the photosynthetic bacterium R. faecalis PA2.

Magnetite-loaded rice husk biochar promoted the denitrification performance of Aquabacterium sp. XL4 under low carbon to nitrogen ratio: Optimization and mechanism

The removal of nitrate (NO₃^--N) under the low carbon to nitrogen (C/N) ratio is a widespread issue. Here in, a modified biochar (MRHB) was prepared by combining rice husk and magnetite to promote the denitrification performance of Aquabacterium sp. XL4 under low C/N ratio. In addition, when the modified H₂O₂ concentration was 0.6 mM, the dosage was 5.0 g L^-1, the C/N ratio was 1.5, and the pH was neutral, the nitrate removal efficiency is 97.9%. Fluorescence excitation-emission matrix spectra (3D-EEM) showed that the metabolism of strain XL4 was stable under optimal conditions. Furthermore, the results of flow cytometry (FC) showed that the amounts of intact cells with MRHB was excellent. The measurement of cytochrome c concentration, total membrane permeability (T_mp), electron transport system activity (ETSA), and cyclic voltammetry curve (CV) confirmed that the MRHB improved the electron transfer and membrane activity of strain XL4.

Facile synthesis of superparamagnetic thiamine/Fe3O4 with enhanced adsorptivity toward divalent copper ions

The development of environmentally friendly adsorbents has been extensively carried out to overcome the detrimental effects of heavy metal accumulation, which has persistently become a global ecological problem. In pursuit of generating eco-friendly adsorbents, a green method for synthesizing thiamine functionalized-Fe₃O₄ (FT) was developed in this study. A one-step chemical oxidation and functionalization technique was used to prepare FT using the ammonia-containing solvent. A molar ratio of ammonia:Fe:thiamine of 15:1:1 was shown to produce FT15 with high yield, adsorptivity, and purity. XRD, XPS, FTIR, SEM, and SQUID characterization of FT15 revealed the formation of superparamagnetic thiamine functionalized Fe₃O₄ in their particles. This superparamagneticity facilitates the easy recovery of FT15 particles from the waste-containing solution by using an external magnetic force. The batch adsorption of Cu(II) onto FT15 showed the best fit with the Sips adsorption isotherm model with a maximum adsorption capacity of 426.076 mg g^-1, which is 5.69-fold higher capacity than the control unmodified Fe₃O₄ (F15). After five adsorption-desorption cycles, the FT15 can maintain up to 1.95-fold higher capacity than the freshly synthesized F15. Observation on the physicochemical properties of the post-adsorption materials showed the contribution of an amine group, pyrimidine ring, and the thiazolium group of thiamine in boosting its adsorption capacity. This study provides important findings to advance the adsorptivity of magnetic adsorbents with promising recoverability from aqueous solution by employing naturally available and environmentally friendly compounds such as thiamine.

Independent of direct interspecies electron transfer: Magnetite-mediated sulphur cycle for anaerobic degradation of benzoate under low-concentration sulphate conditions

The aim of this study was to investigate the primary mechanism of magnetite promoting anaerobic degradation of aromatic compounds under the low-concentration sulphate conditions. Under influent conditions of benzoate at 50 mM-chemical oxygen demand (COD) and sulphate at 15 mM, magnetite promoted benzoate degradation (77.1% vs 56.3%), while the effluent sulphate concentration was slightly higher than that without magnetite (1.6 mM vs 0.7 mM), inconsistent with functional gene prediction that both sulphate respiration and sulphur compound respiration were relatively more active in the presence of magnetite. Remarkably, X-ray diffraction showed that, signal related to Fe₃O₄ faded away and finally was replaced by FeSO₄ and FeS, indicating that magnetite participated in benzoate degradation coupled to sulphate reduction via dissimilatory Fe(III) reduction. Further X-ray photoelectron spectroscopy showed that, signal related to S⁰ was only detected with magnetite, suggesting the possibility of re-oxidation of sulphide to elemental sulphur coupled to Fe(III) reduction. This was further supported by the increase in abundance of Desulfuromonas acetexigens capable of growing on Fe(III). In addition, magnetite specially enriched the chemolithotrophic sulphur-disproportionating microbes, Desulfovibrio aminophilus, which might proceed the disproportionation of elemental sulphur to sulphate and sulphide to achieve a sulphur cycle for benzoate degradation.

Formation and characterization of conductive magnetite-embedded granules in upflow anaerobic sludge blanket reactor treating dairy wastewater

Promoting direct interspecies electron transfer (DIET) with conductive additives has proved effective in improving anaerobic digestion performance and stability. However, its application is limited by the need to replenish the washout loss of conductive materials. This study reports the formation of conductive magnetite-embedded granular sludge and its long-term influence on the performance of upflow anaerobic sludge blanket reactors treating dairy wastewater. The magnetite-supplemented reactor maintained better performance than the no-magnetite control, with greater sludge settling and electron transport activity, throughout the 192-d experiment at increasing organic loading rates (1.2-8.5 g chemical oxygen demand/L·d). The abundance of electroactive microbes also remained higher in the magnetite-supplemented reactor. The results suggest that DIET-based electric syntrophy was promoted in the magnetite-embedded granules. This study is the first to demonstrate the self-embedment of submicron conductive material into granular sludge and its benefits. These findings offer a new approach to enhancing anaerobic granular sludge systems.

Musca domestica (Diptera: Muscidae) as a biological model for the assessment of magnetite nanoparticles toxicity

The use of nanoparticles (NPs) is rapidly expanding; there is a critical need for efficient assays to first determine the potential toxicity of NPs before their use in human applications. Magnetite nanoparticles (Fe₃O₄ NPs) have tremendous applications which include cell separation, arsenic removal from water and DNA separation. Spherically shaped Fe₃O₄ NPs with sizes ranging from 23 to 30 nm were used in this study. The housefly, Musca domestica is the most common fly species. It is present worldwide and considered to be an important medical insect which can carry and transmit over 100 human pathogens and zoonotic agents. It has been used in this study to assess Fe₃O₄NPs toxicity and give us an overview of their impact. The larvicidal activity of Fe₃O₄NPs was tested against the third instar larvae of M. domestica. We investigated the effects of six varying concentrations (15, 30, 45, 60, 75 and 90 μg/mL) used under laboratory conditions in two differential application assays: contact and feeding. The LC₅₀ value for Fe₃O₄ NPs was 60 and 75 μg/mL by feeding and contact, respectively. To investigate the toxicity effects of Fe₃O₄ NPs on houseflies, morphological and histoarchitectural changes in larvae, pupae and adult flies were analyzed. NP exposure caused morphological abnormalities of larvae and pupae as well as larval pupal intermediates, and deformed adult with crumpled wings. Also, some adults couldn't emerge and remained in their puparia. The histological examinations showed that Fe₃O₄ NPs caused severe tissue damage especially in the cuticle and the digestive system. Thus, besides affecting the organ of first contact (digestive system), remote organs such as the integument are also targeted by Fe₃O₄ NPs suggesting a systemic impact on fly development and physiology.

Effect of magnetite on the catalytic oxidation of polycyclic aromatic hydrocarbons in fly ash from MSW incineration: A comparative study of one-step and two-step hydrothermal processes

Polycyclic aromatic hydrocarbons (PAHs), many of which are carcinogenic, teratogenic, and mutagenic, exist in fly ash (FA) produced from municipal solid waste incineration (MSWI). Hydrothermal treatment (HT) is an efficient approach to remove PAHs from MSWI FA. Here, magnetite (Fe₃O₄) was used as the catalyst and hydrogen peroxide (H₂O₂) as the oxidant for one-step and two-step catalytic hydrothermal methods. When the magnetite dosage increased to 15 wt%, the maximum degradation rates of PAHs were 84.36% and 92.51%, respectively; however, the toxicity equivalent quantity (TEQ) degradation rates of the PAHs both increased upon increasing the magnetite dose. At 20 wt% Fe₃O₄, the maximum TEQ degradation rates of the PAHs were 93.29% and 97.76%, respectively. The reaction between OH and PAHs is non-selective, which means that LMW, MMW, and HMW PAHs were all degraded. The decrease in TEQ was mainly due to the degradation of HMW PAHs, i.e., those with five rings. Under the same Fe₃O₄ dose, oxidant dose, and reaction time, the detoxification of PAHs by the two-step method was significantly better than that of the one-step method, possibly because the two-step method more effectively produced OH. The first step degraded more than 90% of PAHs, and the residual PAHs in the HT products of the first step limited the utilization of the oxidant during the second step. The minerals in the HT products implied that the two-step hydrothermal method not only produced more OH, which reacted with PAHs, but also generated metal-magnetite substitution, which affected its surface reactivity during heavy metal adsorption and catalysis. These results revealed that both magnetite and the two-step hydrothermal treatment degraded PAHs. 20 wt% magnetite was the optimal amount during the two-step hydrothermal catalytic oxidation of MSWI FA.

Combined effect of zero valent iron and magnetite on semi-dry anaerobic digestion of swine manure

Combined effect of zero valent iron (ZVI) and magnetite on semi-dry anaerobic digestion of swine manure was studied. Compared with control, the addition of 5 g/L ZVI, magnetite and their mixture (1:1 wt) increased the CH₄ yield by 17.6%, 22.7% and 21.9%, respectively. The three additives improved CH₄ production through altering the metabolism pathways, rather than improving the solid degradation efficiency. ZVI promoted interspecies hydrogen transfer (IHT) by enriching H₂-comsuming Methanolinea and acetate-oxidizing bacteria (Sedimentibacter and Clostridium). Magnetite enriched dissimilatory iron reduction bacteria (Acinetobacter) to accelerate organic hydrolysis and established direct interspecies electron transfer (DIET) by enriching Methanothrix and Methanospirillum. Key microorganisms relative to IHT (Clostridium) and DIET (Methanothrix and Methanospirillum) were simultaneously enriched with ZVI + magnetite, but they only showed an additive effect on methanogenesis, the lack of synergetic effect was attributable to the possible trade-off between IHT and DIET, or the little improvement effect of additives on substrate biodegradability.

Polyethylene over magnetite-multiwalled carbon nanotubes for kerosene removal from water

In this study, a nano-adsorbent was prepared for kerosene removal from water. Multiwalled carbon nanotubes (MWCNTs) were functionalized with concentrated HNO₃ (nitric acid). Subsequently, Fe₃O₄ (magnetite) nanoparticles were deposited on the MWCNTs to prepare a magnetite/MWCNTs (Fe-MWCNTs) nanocomposite. Then, polyethylene was added to the Fe-MWCNTs to fabricate a polyethylene/magnetite/MWCNTs (PE/Fe-MWCNTs) novel nanocomposite. The nano-adsorbent was characterized using BET, FTIR, Raman, XRD, TEM, and SEM. A kerosene-water model mixture was used for adsorption tests. Several parameters: adsorption time, adsorbent dose, solution pH, solution temperature, and kerosene concentration in the kerosene-water model mixture, were analyzed during adsorption experiments. After each batch experiment, kerosene concentration was determined using high-performance liquid chromatography (HPLC). Magnetic field was used to remove the adsorbent after each experiment. The kerosene adsorption capacity and removal efficiency of the PE/Fe-MWCNTs nanocomposite (3560 mg/g and 71.2 %, respectively) were higher than those of Fe-MWCNTs, ox-MWCNTs, and fresh MWCNTs (3154 mg/g and 63.1 %, 2204 mg/g and 44.0 %, and 2092 mg/g and 41.8 %, respectively). Kerosene adsorption followed a pseudo-second-order kinetic model (R² = 0.999) and the Langmuir isotherm model, suggesting that adsorption was uniform and homogenous process.

Fate and impact of maghemite (γ-Fe2O3) and magnetite (Fe3O4) nanoparticles in barley (Hordeum vulgare L.)

The increasing demand for food in the world has made sustainable agriculture practices even more important. Nanotechnology applications in many areas have also been used in sustainable agriculture in recent years for the purposes to improve plant yield, pest control, etc. However, ecotoxicology and environmental safety of nanoparticles must be evaluated before large-scale applications. This study comparatively explores the efficacy and fate of different iron oxide NPs (γ-Fe2O3-maghemite and Fe3O4-magnetite) on barley (Hordeum vulgare L.). Various NP doses (50, 100, and 200 mg/L) were applied to the seeds in hydroponic medium for 3 weeks. Results revealed that γ-Fe2O3 and Fe3O4 NPs significantly improved the germination rate (~37% for γ-Fe2O3; ~63% for Fe3O4), plant biomass, and pigmentation (P < 0.005). Compared to the control, the iron content of tissues gradually raised by the increasing NPs doses revealing their translocation, which is confirmed by VSM analysis as well. The findings suggest that γ-Fe2O3 and Fe3O4 NPs have great potential to improve barley growth. They can be recommended for breeding programs as nanofertilizers. However, special care should be paid before the application due to their unknown effects on other living beings.

New insights on plasters, pigments and binder in mural paintings of the Setka tomb (QH 110), Elephantine, Aswan, Upper Egypt

Mural paintings within the tomb of Setka, Qubbet el-Hawa, in Aswan, Upper Egypt, were investigated using a multi-disciplinary analytical approach (Stereomicroscopy, SEM-EXD and FT-IR spectroscopy). The walls of the tomb were hewn from fragile sandstone and covered by a clay plaster, overlaid by two layers of white gypsum plaster. SEM micrographs were indicative of the penetration of fungal mycelium within the pores of the gypsum plaster, forming white encrustations due to the re-precipitation of gypsum. SEM micrographs revealed that the calcification of the gypsum plaster had occurred due to its exposure to a high temperature. The EDX pattern for the white plaster gave the characteristic spectrum of gypsum, the blue pigment was Egyptian blue, the black pigment was magnetite, the white pigment was of gypsum (or anhydrite) and the yellow pigment was limonite. Finally, the FT-IR spectrum of the binder gave the characteristic features of gum Arabic.

Removal of levofloxacin from aqueous solution by green synthesized magnetite (Fe3O4) nanoparticles using Moringa olifera: Kinetics and reaction mechanism analysis

Levofloxacin antibiotic is frequently being detected in the environment and regarded as an emerging contaminant. The present study was focused on the green synthesis of magnetite (Fe₃O₄ - gINPs) nanoparticles from Moringa olifera and its efficiency for removal of levofloxacin from aqueous solution. The adsorbent magnetite nanoparticles (Fe₃O₄) were prepared by green synthesis using Moringa olifera and coprecipitation method. Characterizations analyses of both chemically and green synthesized nanoparticles were performed by SEM, XRD, and FTIR. The average crystallite size of gINPs was 14.34 nm and chemically synthesized was 18.93 nm. The performance of the synthesized product was evaluated by adsorption capacity and removal efficiency. The parameters considered included adsorbent (gINPs) dosage, initial concentration of adsorbate, pH, contact time, and temperature. The obtained data were fitted to kinetic and isotherm models to determine the mechanism. Adsorption batch experiments were conducted to determine the reaction mechanism by studying kinetics while fitting isotherm models for samples analyzed using HPLC at 280 nm. Results showed that 86.15% removal efficiency of 4 mg L^-1 levofloxacin was achieved by 100 mg L^-1 gINPs in 24 h contact time when all other parameters (pH 7, temperature 25 °C) were kept constant. The maximum adsorption capacity achieved at equilibrium was 22.47 mg/g. Further, it was identified as a pseudo-second-order model with R² = 0.965 for adsorption kinetics while isotherm data better fitted to the Freundlich model compared to Langmuir isotherm with R² = 0.994. The potential pathway determined for levofloxacin removal was chemisorption with minor diffusion, multilayer, spontaneous and exothermic processes on the gINPs (Fe₃O₄). Reusability experiments were conducted in four cycles and removal efficiency varied from 85.35% to 80.47%, indicating very high potential of the adsorbent for re-use.

Effect of magnetite on anaerobic digestion treating saline wastewater: Methane production, biomass aggregation and microbial community dynamics

In this study, the effect of magnetite amendment on anaerobic digestion was investigated at three increasing salinity levels (0.5%, 1% and 2% NaCl). The amendment of magnetite enhanced the methane yield by 36.3%, 33.3% and 16.5% at low salinity (0.5% NaCl) and high salinity (1% and 2% NaCl), respectively. Meanwhile, a larger proportion of granules was obtained in the magnetite amended reactor (48.05% vs 33.16% at the end of operation). Microbial analysis suggested magnetite could induce more methanogenesis partnerships between hydrogenotrophic methanogens and syntrophic bacteria. Methanosaeta and Methanocorpusculum were the alternating dominant methanogens at low salinity and high salinity. While Streptococcus and Mesotoga were two prevalent bacteria that showed totally different transition tendency in two reactors. Additionally, the supplement of magnetite could relieve the suppression of methanogenesis-related gene expression caused by salinity, thus facilitated the higher methane production.

Influencing mechanisms of siderite and magnetite, on naphthalene biodegradation: Insights from degradability and mineral surface structure

Biodegradation is the most economical and efficient process for remediating polycyclic aromatic hydrocarbons (PAHs) such as naphthalene (Nap). Soil composition is pivotal in controlling PAH migration and transformation. Iron minerals such as siderite and magnetite are the primary components of soil and sediment and play key roles in organic pollutant biodegradation. However, it is unclear whether siderite and magnetite promote or inhibit Nap biodegradation. The effects of siderite and magnetite on Nap biodegradation were investigated through batch experiments in this study. The results indicated that siderite increased Nap biodegradation efficiency by 7.87%, whereas magnetite inhibited Nap biodegradation efficiency by 3.54%. In the presence of siderite, Nap-degrading bacteria with acid-producing effects promoted siderite dissolution via metabolic activity, resulting in an increased Fe (II) concentration in solution which accelerated the iron reduction process and promoted Nap biodegradation. In addition, the presence of iron minerals altered the genus-level community structure. Anaerobic sulfate-reducing bacteria such as Desulfosporosinus occurred in the presence of siderite, indicating that sulfate reduction occurred in advance under the influence of siderite. In the presence of magnetite, Fe (III) in iron minerals were converted to Fe (II), and under the mediation of microorganisms, Fe (II) combined with carbonate to form secondary minerals (e.g., siderite). Secondary minerals were attached to the surface of magnetite, which inhibited magnetite dissolution and reduced the efficiency of Fe (III) utilization by microorganisms. Furthermore, as the reaction proceeds, acid-producing microorganisms promoted magnetite further dissolution, resulting in a longer duration of the Fe (III) reduction process. Bacteria utilizing sulfuric acid as the terminal electron acceptor consumed organic matter more rapidly than those using iron as the terminal electron acceptor. Therefore, magnetite inhibited Nap degradation. These observations enhance our understanding of the interaction mechanisms of iron minerals, organic pollutants, and degrading bacteria during the biodegradation process.

Sustainable materials in the removal of pesticides from contaminated water: Perspective on macro to nanoscale cellulose

Recently, over utilization of pesticides in agrarian and non- agrarian sectors has resulted in a significant increment in the deposition of their remnants in different segments of the environmental media. The presence of pesticides and transportation of their different metabolites in rivers, ponds, lakes, soils, air, groundwater sources and drinkable water sources has demonstrated a high threat to human wellbeing and the climate. Thus, the removal of pesticides and their metabolites from contaminated water is imperative to lessen the ill effects of pesticides on human beings. In the present article, we have appraised recent advances in pesticides removal utilizing low cost pristine and functionalized cellulose biomass-based derivatives. One of the key focus has been on better understand the destiny of pesticides in the environment as well as their behaviour in the water. In addition, the impact of magnetite cellulose nanocomposites, cellulose derived photo nano-catalyst, cellulose/clay nano composites, CdS/cellulose nanocomposites and activated carbons/biochar on percent removal of pesticides have also been a part of the current review. The impact of different parameters such as adsorbent dosage, pH, time of contact and initials pesticide concentration on adsorption capacity and adsorption kinetics followed during absorption by different cellulosic bio-adsorbents has also been given. The cellulosic biomass is highly efficient in the removal of pesticides and their efficiency further increases upon functionalization or their conversion into activated carbons forms. Nano particles loaded cellulosic materials have in general found to be less efficient than raw, functionalized cellulosic materials and activated carbons. Further, among different nano particles loaded with cellulose-based materials, cellulose/MnO₂ photonanocatalyst were noticed to be more effective. So considerable efforts should be given to determine the finest practices that relate to the dissipation of different pesticides from the water.

Ex situ and in situ Magnetic Phase Synthesised Magneto-Driven Alginate Beads

Biocompatible magnetic hydrogels provide a great source of synthetic materials, which facilitate remote stimuli, enabling safer biological and environmental applications. Prominently, the ex situ and in situ magnetic phase integration is used to fabricate magneto-driven hydrogels, exhibiting varied behaviours in aqueous media. Therefore, it is essential to understand their physicochemical properties to target the best material for each application. In this investigation, three different types of magnetic alginate beads were synthesised. First, by direct, ex situ, calcium chloride gelation of a mixture of Fe₃O₄ nanoparticles with an alginate solution. Second, by in situ synthesis of Fe₃O₄ nanoparticles inside of the alginate beads and third, by adding an extra protection alginate layer on the in situ synthesised Fe₃O₄ nanoparticles alginate beads. The three types of magnetic beads were chemically and magnetically characterised. It was found that they exhibited particular stability to different pH and ionic strength conditions in aqueous solution. These are essential properties to be controlled when used for magneto-driven applications such as targeted drug delivery and water purification. Therefore, this fundamental study will direct the path to the selection of the best magnetic bead synthesis protocol according to the defined magneto-driven application.

Evaluation of gum ghatti-g-poly(itaconic acid) magnetite nanocomposite as an adsorbent material for water purification

A porous hydrogel nanocomposite has been made by grafting poly(itaconic acid) on the polysaccharide, gum ghatti and by embedding magnetite nanoparticles in the copolymer gel matrix. This novel functional material Ggh-g-PIA/Fe₃O₄ was characterized by FTIR, TGA, SEM, EDS, XRD, BET, Zeta potential measurements and VSM techniques. The nanocomposite possesses mesoporous structure with high surface area and exhibits super-paramagnetic behavior due to the presence of magnetite nanoparticles. The hydrogel nanocomposite was evaluated as an adsorbent material for removal of dyes and divalent metal ions. Significant adsorption capacities of 410.2, 387.6, 416.5 and 401.4 mg g^-1 towards methylene blue, rhodamine 6G, Cu (II) and Hg (II) ions respectively were observed. The adsorption isotherms were well described by the Freundlich isotherm model and kinetic studies demonstrated the adsorption to be a pseudo second order kinetic process. Intraparticle diffusion model suggested adsorption to occur by a multi-step diffusion process. Thermodynamic studies indicated a spontaneous and endothermic adsorption. Further, the desorption study indicated the possibility of successful regeneration of the adsorbent. A high removal efficiency, recyclability, convenient recovery after use due to the magnetic nature makes this polysaccharide based nanocomposite an environment friendly adsorbent material for water purification.

Iron oxide nanoparticles exert inhibitory effects on N-Bis(2-hydroxypropyl)nitrosamine (DHPN)-induced lung tumorigenesis in rats

Iron oxide nanoparticles (magnetite) have been widely used in industry and medicine. However, the safety assessment of magnetite has not been fully completed. The present study was conducted to assess effects of magnetite on carcinogenic activity, using a medium-term bioassay protocol. A total of 100 male Fischer 344 rats, 6 weeks old, were randomly divided into 5 groups of 20 animals each, and given a basal diet and drinking water containing 0 or 0.1% of N-bis(2-hydroxypropyl)nitrosamine (DHPN) for 2 weeks. Two weeks later, the rats were intratracheally instilled magnetite 7 times at an interval of 4 weeks, at the doses of 0, 1.0 or 5.0 mg/kg body weight, and sacrificed at the end of the experimental period of 30 weeks. The multiplicities of macroscopic lung nodules and histopathologically diagnosed bronchiolo-alveolar hyperplasia, induced by DHPN, were both significantly decreased by the high dose of magnetite. The expression of minichromosome maintenance (MCM) protein 7 in non-tumoral alveolar epithelial cells, and the number of CD163-positive macrophages in tumor nodules were both significantly reduced by magnetite. It is suggested that magnetite exerts inhibitory effects against DHPN-induced lung tumorigenesis, by the reduction of alveolar epithelial proliferation and the M2 polarization of tumor-associated macrophages.

Tracking microbial community shifts during recovery process in overloaded anaerobic digesters under biological and non-biological supplementation strategies

Anaerobic digestion encounters operational instability due to fluctuations in organic loading. Propionic acid (HPr) is frequently accumulated due to its unfavorable reaction thermodynamics. Here, 'specific' bioaugmentation using HPr enrichment cultures (three different injection regimes of quantity and frequency) was compared with 'non-specific' bioaugmentation using anaerobic sludge, and with non-biological supplementation of magnetite or coenzyme M. The specific bioaugmentation treatments showed superior recovery responses during continuous feeding after a peak overload. A 'one-shot' bioaugmentation with enrichment showed the best remediation, with ~25% recovery time and >10% CH₄ conversion efficiency compared to the control. Consecutive bioaugmentation showed evidence of increased stability of the introduced community. Families Synergistaceae, Syntrophobacteraceae, and Kosmotogaceae were likely responsible for HPr-oxidation, in potential syntrophy with Methanoculleus and Methanobacterium. The different supplementation strategies can be considered to reduce the effect of start-up or overload in anaerobic digesters based on the availability of supplementation resources.

Airborne particle accumulation and loss in pollution-tolerant lichens and its magnetic quantification

Pollution-tolerant lichens are recognized ecological indicators of air pollution in cities, which can also collect airborne anthropogenic particles in their tissues. Harmful (sub)micron-sized magnetites are a ubiquitous component of air particle pollution, adversely impacting human health. In this work, in situ magnetic susceptibility κ_is of well-characterized ultrafine magnetite and lichen thalli were measured to quantify the amount of airborne magnetic particles (AMP) after calibration and to assess the lichen's decontamination over time. Up to 2850 magnetic measurements were carried out in twenty-nine transplanted lichens (collected in urban and clean areas) from winter 2020 to winter 2021. Before the transplants, their initial κ_is values were 0.23-9.45 × 10^-5 SI, representing AMP contents of 0.1-4.6 mg in lichen thalli. After lichens were transplanted to a shared site, the magnetic signals evidenced short-term increases and long-term decreases. After three, five and nine months, the AMP loss is more pronounced for transplanted lichens from polluted (e.g., AMP_5-months loss = 0.59 mg) than clean (= 0.08 mg) sites. Rainfall influenced the lichen's decontamination between seasons. In situ measurements and lichens offer a valued and time-saving methodology for biomonitoring harmful airborne particles simply and effectively.

Role of weak magnetic field for enhanced oxidation of orange G by magnetic Fenton

The role of weak magnetic field (WMF) on the degradation of a common textile azo-dye, orange G (OG), by magnetic Fenton system was investigated in detail. The results showed that the presence of WMF can provide better performance of the Fe₃O₄/H₂O₂ system for OG degradation. The optimized reaction conditions were contained at 1 mM Fe₃O₄ as Fe, 20 mT of magnetic field intensity, 20 mM H₂O₂, and initial pH of 3.0. The removal efficiency of OG by Fe₃O₄/H₂O₂ coupling with WMF increased largely from 56.3 to 82.3% compared with Fe₃O₄/H₂O₂ process. Both the electron paramagnetic resonance (EPR) analysis and the quenching effect of tert-butyl alcohol (TBA) confirmed that hydroxyl radical (•OH) was the primary reactive oxygen species in WMF-Fe₃O₄/H₂O₂ system. The improving effect of WMF was explained by the magnetoconvection theory. The presence of WMF could accelerate the corrosion rate of Fe₃O₄ and thus promoted the release of Fe(II), which led to the increased production of •OH and enhanced the degradation of OG. Moreover, it was surprising to observe that the WMF induced improvement in OG degradation by heterogeneous Fenton involving the iron sludge, namely FeOOH and Fe₂O₃, as catalysts. These results indicated that WMF could be utilized as an efficient and cost-effective strategy to improve the removal of organic pollutants by iron oxide-based Fenton process.

Size-resolved, quantitative evaluation of the magnetic mineralogy of airborne brake-wear particulate emissions

Exposure to particulate air pollution has been associated with a variety of respiratory, cardiovascular and neurological problems, resulting in increased morbidity and mortality worldwide. Brake-wear emissions are one of the major sources of metal-rich airborne particulate pollution in roadside environments. Of potentially bioreactive metals, Fe (especially in its ferrous form, Fe²⁺) might play a specific role in both neurological and cardiovascular impairments. Here, we collected brake-wear particulate emissions using a full-scale brake dynamometer, and used a combination of magnetic measurements and electron microscopy to make quantitative evaluation of the magnetic composition and particle size of airborne emissions originating from passenger car brake systems. Our results show that the concentrations of Fe-rich magnetic grains in airborne brake-wear emissions are very high (i.e., ~100-10,000 × higher), compared to other types of particulate pollutants produced in most urban environments. From magnetic component analysis, the average magnetite mass concentration in total PM₁₀ of brake emissions is ~20.2 wt% and metallic Fe ~1.6 wt%. Most brake-wear airborne particles (>99 % of particle number concentration) are smaller than 200 nm. Using low-temperature magnetic measurements, we observed a strong superparamagnetic signal (indicative of ultrafine magnetic particles, < ~30 nm) for all of the analysed size fractions of airborne brake-wear particles. Transmission electron microscopy independently shows that even the larger size fractions of airborne brake-wear emissions dominantly comprise agglomerates of ultrafine (<100 nm) particles (UFPs). Such UFPs likely pose a threat to neuronal and cardiovascular health after inhalation and/or ingestion. The observed abundance of ultrafine magnetite particles (estimated to constitute ~7.6 wt% of PM_0.2) might be especially hazardous to the brain, contributing both to microglial inflammatory action and excess generation of reactive oxygen species.