Dual function of magnetic nanocomposites-based SERS lateral flow strip for simultaneous detection of aflatoxin B1 and zearalenone

Aflatoxin B1 (AFB1) and zearalenone (ZEN) are two mycotoxins that often co-occur in corn. A surface-enhanced Raman scattering-based lateral flow immunoassay (SERS-LFIA) that can simultaneously detect AFB1 and ZEN in corn samples was developed employing the core-interlayer-satellite magnetic nanocomposites (Fe3O4@PEI/AuMBA@AgMBA) as dual-functional SERS tags. Under the optimal conditions, the detection ranges of AFB1 and ZEN in corn samples were 0.1-10 μg/kg and 4-400 μg/kg, respectively. Moreover, the test results for two mycotoxins in contaminated corn samples employing the suggested SERS-LFIA was in line with those of the HPLC technique. In view of its satisfactory sensitivity, accuracy, precision and short testing time (20 min), the developed system has a promising application prospect in the on-site simultaneous detection of AFB1 and ZEN.

Synthesis of chitosan-based grafting magnetic flocculants for flocculation of kaolin suspensions

A series of novel chitosan-based magnetic flocculants FS@CTS-P(AM-DMC) was prepared by molecular structure control. The characterization results showed that FS@CTS-P(AM-DMC) had a uniform size of about 21.46 nm, featuring a typical core-shell structure, and the average coating layer thickness of CTS-P(AM-DMC) was about 5.03 nm. FS@CTS-P(AM-DMC) exhibited excellent flocculation performance for kaolin suspension, achieved 92.54% turbidity removal efficiency under dosage of 150 mg/L, pH 7.0, even at high turbidity (2000 NTU) with a removal efficiency of 96.96%. The flocculation mechanism was revealed to be dominated by charge neutralization under acidic and neutral conditions, while adsorption and bridging effects play an important role in alkaline environments. The properties of magnetic aggregates during flocculation, breakage, and regeneration were studied at different pH levels and dosages. In the process of magnetophoretic, magnetic particles collide and adsorb with kaolin particles continuously due to magnetic and electrostatic attraction, transform into magnetic chain clusters, and then further form three-dimensional network magnetic aggregates that can capture free kaolin particles and other chain clusters. Particle image velocimetry confirmed the formation of eddy current of magnetic flocs and experienced three stages: acceleration, stabilization, and deceleration.

Effects of foliar iron oxide nanoparticles (Fe3O4) application on photosynthetic parameters, distribution of mineral elements, magnetic behaviour, and photosynthetic genes in tomato (Solanum lycopersicum var. cerasiforme) plants

This study aims to examine the effect of foliar magnetic iron oxide (Fe3O4) nanoparticles (IONP) application on the physiology, photosynthetic parameters, magnetic character, and mineral element distribution of cherry tomatoes (Solanum lycopersicum var. cerasiforme). The IONP suspension (500 mg L-1) was sprayed once (S1), twice (S2), thrice (S3), and four times (S4) a week on seedlings. Upon 21 days of the treatments, photosynthetic parameters (chlorophyll, carotenoids, photosynthetic yield, electron transport rate) were elucidated. Inductively-coupled plasma-optical emission spectrometer (ICP-OES) and vibrating sample magnetometer (VSM) were used to determine the mineral elements and abundance of magnetic power in the seedlings. In addition, the RT-qPCR method was performed to quantify the expressions of photosystem-related (PsaC, PsbP6, and PsbQ) and ferritin-coding (Fer-1 and Fer-2) genes. Results revealed that the physiological and photosynthetic indices were improved upon S1 treatment. The optimal dosage of IONP spraying enhances chlorophyll, carotenoid, electron transport rate (ETR), and effective photochemical quantum yield of photosystem II (Y(II)) but substantially diminishes non-photochemical quenching (NPQ). However, frequent IONP applications (S2, S3, and S4) caused growth retardation and suppressed the photosynthetic parameters, suggesting a toxic effect of IONP in recurrent treatments. Fer-1 and Fer-2 expressions were strikingly increased by IONP applications, suggesting an attempt to neutralize the excess amount of Fe ions by ferritin. Nevertheless, frequent IONP treatment fluctuated the mineral distribution and caused growth inhibition. Although low-repeat foliar applications of IONP (S1 in this study) may help improve plant growth, consecutive applications (S2, S3, and S4) should be avoided.

Preparation of highly elastic superhydrophobic CNF/Fe3O4 based materials modified in aqueous phase for oil-water separation

Magnetic superhydrophobic materials have broad application prospect in oil-water separation. In this study, a magnetic and superhydrophobic aerogel with lamellar structure was successfully prepared using cellulose nanofibrils (CNF) as the skeleton, Fe3O4 as the magnetic ion, 1H, 1H, 2H, 2H trialkylfluorooctane triethoxysilane (FS) and 3-(2-aminoethyl amino)-propyl trimethoxysilane (AS) as the combined modifier. The prepared aerogel shows lower density (38.63 mg/cm3), excellent magnetic (15.13 emu/g), high elasticity and good oil sorption properties (21 g/g). In addition, FS/AS also exhibits excellent mechanical properties and superhydrophobic ability (water contact angle (WCA) of 151.9 ± 1.4°), as it provides sufficient toughness and low surface energy for the layer-branch structure. It should be noted that the entire preparation process is carried out in the aqueous phase, without the use of any organic solvents, providing a green oil-water separation strategy.

Converting peracetic acid activation by Fe3O4 from nonradical to radical pathway via the incorporation of L-cysteine

Recently, peracetic acid (PAA) based Fenton (-like) processes have received much attention in water treatment. However, these processes are limited by the sluggish Fe(III)/Fe(II) redox circulation efficiency. In this study, L-cysteine (L-Cys), an environmentally friendly electron donor, was applied to enhance the Fe3O4/PAA process for the sulfamethoxazole (SMX) abatement. Surprisingly, the L-Cys incorporation was found not only to enhance the SMX degradation rate constant by 3.2 times but also to switch the Fe(IV) dominated nonradical pathway into the •OH dominated radical pathway. Experiment and theoretical calculation result elucidated -NH2, -SH, and -COOH of L-Cys can increase Fe solubilization by binding to the Fe sites of Fe3O4, while -SH of L-Cys can promote the reduction of bounded/dissolved Fe(III). Similar SMX conversion pathways driven by the Fe3O4/PAA process with or without L-Cys were revealed. Excessive L-Cys or PAA, high pH and the coexisting HCO3-/H2PO4- exhibit inhibitory effects on SMX degradation, while Cl- and humic acid barely affect the SMX removal. This work advances the knowledge of the enhanced mechanism insights of L-Cys toward heterogeneous Fenton (-like) processes and provides experimental data for the efficient treatment of sulfonamide antibiotics in the water treatment.

Insights into the long-term immobilization performances and mechanisms of CMC-Fe0/FeS with different sulfur sources for uranium under anoxic and oxic aging

Nanoscale zerovalent iron (Fe0)-based materials have been demonstrated to be a effective method for the U(VI) removal. However, limited research has been conducted on the long-term immobilization efficiency and mechanism of Fe0-based materials for U(VI), which are essential for achieving safe handling and disposal of U(VI) on a large scale. In this study, the prepared carboxymethyl cellulose (CMC) and sulfurization dual stabilized Fe0 (CMC-Fe0/FeS) exhibited excellent long-term immobilization performances for U(VI) under both anoxic and oxic conditions, with the immobilization efficiencies were respectively reached over 98.0 % and 94.8 % after 180 days of aging. Most importantly, different from the immobilization mechanisms of the fresh CMC-Fe0/FeS for U(VI) (the adsorption effect of -COOH and -OH groups, coordination effect with sulfur species, as well as reduction effect of Fe0), the re-mobilized U(VI) were finally re-immobilized by the formed FeOOH and Fe3O4 on the aged CMC-Fe0/FeS. Under anoxic conditions, more Fe3O4 was produced, which may be the main reason for the long-term immobilization U(VI). Under oxic conditions, the production of Fe3O4 and FeOOH were relatively high, which both played significant roles in re-immobilizing U(VI) through surface complexation, reduction and incorporation effects.

Selective removal of thallium from water by MnO2-doped magnetic beads: Performance and mechanism study

Aqueous thallium has posed an increasing threat to environment as human's intensified activities in mining, refining, process and discharge. Remediation on thallium pollution has been of up-most importance to water treatment. In present work, MnO2 and magnetic Fe3O4 have been implanted to sodium alginate (SA) in presence of carboxyl methyl cellulose (CMC), and the resultant beads consisted of SA/CMC/MnO2/Fe3O4 were characterized. The materials were applied to treatment of Tl-contaminated water as adsorbent in lab. The removal results revealed that the adsorption capacity reached 38.8 mg (Tl)·g (beads)-1 and almost 100 % removal efficiency was achieved. The residual Tl was below 0.1 μg·L-1, meeting the discharge standard regulated in China. The kinetic adsorption was better described as a pseudo-second-order and three-step intra-particle diffusion model. Freundlich isotherm was well fitted the experimental data. The absorbent shown an excellent competitive specificity (KTl/M: ∼104!) over common hazardous ions Cu2+, Cd2+, Co2+, Pb2+ and Cr3+, as well as naturally abundant K+ and Na+ (KTl/M: 10-102) in mimic environmental conditions. Regeneration and reusability of the absorbent was also verified by five absorption-desorpotion cycles. XPS results revealed that a redox reaction between Mn4+ with Tl+, and an ion exchange of H+ (-O-Fe) and Tl+ were assumed to be main process for the specific capturing. This study provided an efficient SA/CMC/MnO2/Fe3O4 composite beads that could be a promising adsorbent for Tl-polluted water treatment.

Enhanced dewatering extent of sludge by Fe3O4-driven heterogeneous Fenton

Homogeneous Fenton (Fe2+/H2O2) serves as a high-efficiency conditioning method for sludge dewatering due to the generation of strong oxidizing hydroxyl radicals (OH). However, high dose of ferric salts produces iron-rich dewatered sludge and decrease sludge organic matters, which will not be conducive to the subsequent disposal and reutilization. Considering advantages of Fe3O4 as heterogeneous Fenton catalyst, Fe3O4-activated H2O2 (Fe3O4 + H2O2) in this study was adopted to improve sludge deep-dewatering. Reduction efficiency of the bound water (71.3 %) after Fe3O4 + H2O2 treatment (after a reaction time of 30 min) were much higher than those in the Fe2++H2O2 treatment. Especially, the moisture content of treated sludge cake by Fe3O4 + H2O2 remarkably decreased from 86.4 % to 61.3 %. Improvement mechanism of sludge dewatering after Fe3O4 + H2O2 treatment mainly included electrostatic neutralization, reactive radical oxidation, and skeleton building by analysis of contribution factors. The generation of H+ in acidification could neutralize the negatively charged compounds to promote sludge hydrophobicity. Meanwhile reactive radicals generated from Fe3O4 + H2O2 destroyed sludge extracellular polymeric substances and cell structure to release intracellular water. Furthermore, Fe3O4 as a skeleton builder could reconstruct destructive sludge flocs and form new dewatering channels. Finally, low Fe leaching content and recoverability of Fe3O4 effectively will decrease environmental implication.

In-situ preparation of lignin/Fe3O4 magnetic spheres as bifunctional material for the efficient removal of metal ions and methylene blue

In this paper, magnetic composite of lignin/Fe3O4 spheres were synthesized via a straightforward one-step in-situ solvothermal method showing good capacity for adsorbing heavy metal ions and dyes. The physicochemical properties of lignin/Fe3O4 spheres are analyzed using a range of techniques such as SEM, XRD, FTIR, VSM, TG, and BET. Lignin/Fe3O4 spheres exhibited high adsorption capacities of 100.00, 353.36 and 223.71 and 180.18 mg/g for Cu (II), Ni (II) and Cr (VI) metal ions and methylene blue (MB) with equilibrium attained within 60 min. After the recycling experiments, lignin/Fe3O4 spheres still possesses excellent superparamagnetic properties and displays high adsorption capacity. The lignin/Fe3O4 spheres are an efficient and continuous adsorbent to remove heavy metal ions of Cu (II), Ni (II), Cr (VI) and cationic dyes of methylene blue in wastewater, which proves the great potential in practical pollutants treatment applications for water systems.

Electromagnetic interference shielding of flexible carboxymethyl cellulose/MWCNT@Fe3O4 composite film with ultralow reflection loss

Nowadays, various high-performance electromagnetic interference (EMI) shielding materials have enormous application potential in electronic field. However, traditional EMI shielding materials often have high conductivity, resulting in the serious mismatch between the impedance of the material surface and the free space, which will cause a large amount of reflection of electromagnetic (EM) waves, leading to secondary reflection pollution. In this paper, we report a novel flexible EMI shielding composite film with extremely low reflection loss and efficient EM wave absorption, which was prepared by assisted self-assembly based on simple vacuum filtration using carboxymethyl cellulose as the matrix and MWCNT@Fe3O4 synthesized by chemical coprecipitation as the composite functional filler. By adjusting the Fe3O4 coating degree of MWCNTs in the filler, the composite film achieved the construction of a conductive network with high Fe3O4 content. Benefit by the good adaptability of conductivity and magnetic permeability, the composite film has good impedance matching ability and microwave absorption performance. The reflection loss of the composite film with the thickness of 28 μm in the X-band was only 0.23 dB, accounting for 1.7 % of the total loss. This work provides new insights for the development of EMI materials and effective mitigation secondary EM wave reflection pollution.

Magnetic coagulation and flocculation of kaolin suspension using Fe3O4 with plant polyphenol self-assembled flocculants

In this work, magnetic flocculant (Fe3O4@PP) was synthesized using plant polyphenol (PP) as a shaping ligand via in situ self-assembly. Characterization results revealed that Fe3O4@PP exhibited uniform particle size and excellent dispersibility with PP coating amount of 16.4 %. Experimental results suggested that Fe3O4@PP showed excellent turbidity removal efficiency in a wide pH range (3.0-10) and initial turbidity range (50-2000 NTU). Under the optimal conditions, Fe3O4@PP achieved 95.2 % of turbidity removal for simulated kaolin suspension and 96.9 % for actual wastewater. Fe3O4@PP exhibited excellent recycling and reusability properties, with high recycling efficiency of 93.3 % even after the fifth cycle. Microscopic observation revealed the formation process of magnetic flocs, involving particle aggregation, chain and cluster formation, and dense network aggregate formation. The structural characteristics and size of magnetic flocs were found to be significantly influenced by the combined effects of magnetic force, electric charge, van der Waals force, and functional groups on the surface of PP. The extended Deryaguin-Landau-Verwey-Overbeek models indicated that magnetic interactions were the primary mechanism for magnetic flocculation, accompanied by charge neutralization, adsorption bridging, sweeping, and net trapping.

Electrospun Fe3O4-chitosan/polyvinyl alcohol nanofibrous film for improved capture and elimination of foodborne pathogens

This study developed a new "capture and killing" antibacterial approach for efficient elimination of foodborne pathogens. Fe3O4-Chitosan (CS)/polyvinyl alcohol (PVA) nanofibrous films with improved antibacterial and mechanical properties were fabricated by a simple, environmentally friendly, and cost-effective electrospinning technique. The relationship between the physical properties (viscosity, surface tension, and conductivity) and spinnability of CS/PVA as fiber forming matrix was explored. Electrospun Fe3O4-CS/PVA films (0.03-0.12 mm) with smooth and bead-free nanofibrous structures (145-169 nm) were successfully obtained. Compared with the film electrospun from neat CS/PVA, incorporating Fe3O4 nanoparticles (NPs) (1.25-5 wt%) in CS/PVA nanofibrous film promoted bacterial attachment and increased the final inactivated efficiency, showing a difference with Fe3O4 loading and bacterial strain, which had the highest value against Escherichia coli (E. coli) and Staphyloccus aureus (S. aureus) being 90 % and 66.30 %, respectively. The tensile strength and elongation at break of Fe3O4-CS/PVA films enhanced by 46-192 % and 92-141 %, respectively. Results of the cytotoxicity test indicated that the resulting films had high biocompatibility. These promising findings provide a novel strategy for effective foodborne pathogens elimination, which could apply to sterilizing and food packaging to extend the shelf life of liquid food.

Polydopamine/Fe3O4 modified wood-based evaporator for efficient and continuous water purification

Solar interfacial evaporation is a highly promising technology for seawater desalination and wastewater treatment, while the simple preparation processes and efficient production of clean water based on biomass interfacial evaporators still need further exploration and development. Here, we reported a wood-based evaporator (PFDW) loaded with Fe3O4 and polydopamine (PDA) after simple immersion treatment at room temperature for efficient and continuous water purification. The synergistic photothermal effect of PDA coating and Fe3O4 particles enables the evaporator to achieve high photothermal conversion efficiency in the longer wavelength range, while combined with the rapid water transport capacity endowed by the vertically aligned microporous structure of natural wood, it achieved an evaporation rate of 1.70 kg m-2h-1 and an energy efficiency of 98.0% under 1 kW m-2 irradiation. In addition, the prepared PFDW exhibited sustainable desalination stability and excellent removal efficiency for different water sources including organic dye wastewater, heavy metal effluent, oil-water emulsion and river water. This work provides a new avenue for efficient salt-tolerant portable evaporators.

Magnetic Fe3O4/bamboo-based activated carbon/UiO-66 composite as an environmentally friendly and effective adsorbent for removal of Bisphenol A

The magnetic Fe3O4/bamboo-based activated carbon/Zr-based metal-organic frameworks composite (Fe3O4/BAC/UiO-66) was prepared by hydrothermal method. The as-prepared material was analyzed via TEM, XRD, FT-IR, BET-BJH, VSM and XPS techniques, the results showed that it had good dispersion and magnetic separation capacity (Ms = 44.06 emu∙g-1). Then, the adsorption properties of materials for bisphenol A (BPA) were studied. The results revealed that the removal efficiency of 50 mg·L-1 BPA by 0.1 g of adsorbent can reach 87.18-95% in a wide pH range. Langmuir isotherm model and pseudo-second-order kinetic well fitted the adsorption data. The thermodynamic data indicated that the adsorption process was spontaneous and endothermic. Moreover, BAC as a supporter and UiO-66 as the functional part in the ternary composite may have a synergistic effect, which was beneficial for the removal of contaminants. The Fe3O4/BAC/UiO-66 can be simply separated from the water using its strong magnetism after finish adsorption process, which effectively avoids secondary contamination.

Self-template synthesis of mesoporous and biodegradable Fe3O4 nanospheres as multifunctional nanoplatform for cancer therapy

Superparamagnetic Fe3O4 nanospheres have demonstrated great potential as important components in nanomedicine for cancer imaging and therapy. One of the major obstacles that impedes their application is the slow degradation of ingested Fe3O4 nanospheres, which potentially causes long-term health risks. To tackle this issue, we proposed to fabricate Fe3O4 nanospheres with mesoporous structure via a simple self-template etching method. The mesoporous Fe3O4 nanospheres not only offered large specific surface area and weak-acidic responsive degradability, but also exhibited T2-weighted magnetic resonance contrast enhancement and magnetic targeting, which made them possible to serve as excellent cancer therapeutic nanoplatform. Both inorganic photothermal therapeutic Au nanoparticles and organic chemotherapeutic doxorubicin hydrochloride were demonstrated to be successfully loaded onto such kind of nanoplatform, and the hybrid nanomedicine demonstrated synergistic photothermal and chemotherapeutic activity for tumor elimination under near infrared irradiation and improved biodegradability in weak acidic tumor microenvironment. We believe that this study paved a simple way for designing multifunctional Fe3O4-based biodegradable nanomedicine.

Electricity production performance enhancement of microbial fuel cells with double-layer sodium alginate hydrogel bioanodes driven by high-salinity waste leachate

The poor bacterial loading capacity and biocompatibility of the anode lead to weak electricity production performance of microbial fuel cells (MFCs). Inspired by kelp, we developed a double-layer hydrogel bioanode based on sodium alginate (SA). The inner hydrogel layer of encapsulated Fe3O4 and electroactive microorganisms (EAMs) was used as the bioelectrochemical catalytic layer. The outer hydrogel layer formed by cross-linking SA with polyvinyl alcohol (PVA) was used as the protective layer. The 3D porous structure of the inner hydrogel formed based on Fe3O4 facilitated the electroactive bacteria colonization and electron transfer, while the high structural toughness, salt-resistance and antibacterial properties of the outer highly cross-linked hydrogel served to protect the catalytic layer for stable electricity production. When high-salt waste leachate was used as the nutrient, the amazing open-circuit voltage (OCV) of 1.17 V and the operating voltage of 781 mV were brought by the double-layer hydrogel bioanode PVA@SA&Fe3O4/EAMs@SA.

Synthesis of molecularly imprinted polymer as a nanosorbent for dispersive magnetic micro solid-phase extraction and determination of valsartan in biological samples by UV-Vis Spectrophotometry: Isotherm, kinetics, and thermodynamic studies

A magnetic molecularly imprinted polymer (MIP) was synthesized by precipitation polymerization utilizing Fe₃O₄@SiO₂-MPS as a magnetic core, itaconic acid as a functional monomer, azobisisobutyronitrile as an initiator, and ethylene glycol dimethacrylate as a cross linker. It was then applied as a nanosorbent for dispersive magnetic micro solid phase extraction (DM-µ-SPE) and determination of valsartan in biological fluids. The morphology and structure of magnetic MIP were characterized by Fourier-transform infrared spectroscopy, Field Emission Scanning electron microscopy, Vibrating sample magnetometer, Energy dispersive x-ray analysis, and Thermogravimetric analysis. The influence of operation conditions on sorption, such as pH (4-10), contact time (10-25 min), initial concentration (1-30 mg L^-1), and temperature (25-40 °C) was investigated. After the extraction step, the valsartan concentration was determined by UV-Vis spectrophotometer at 253 nm. The isotherm and kinetic of valsartan sorption were best fitted by the Langmuir model (R² = 0.987) and the Pseudo second-order kinetic model (R² = 0.971), respectively. The maximum monolayer sorption capacity for magnetic MIP was obtained to be 4.56 mg g^-1. The analytical approach demonstrated favorable figures of merit, with a linear dynamic range of 10-100 µg L^-1, a low detection limit of 0.56 µg L^-1, and an acceptable preconcentration factor of 5 acquired in optimum conditions. The recoveries of the suggested technique at three spiked levels of analysis were in the range of 101 %-102 %. Valsartan was extracted from various real samples (urine and human blood plasma samples) utilizing the proposed magnetic nanosorbent, and the results exhibited that magnetic MIP was favorable for extraction and measurement of trace amounts of valsartan in biological samples.

In-situ magnetite deposited wood composites with extensive electromagnetic interference shielding performance

Wood is an insulator material, using its porous structure to endow it with efficient microwave absorption and broaden its application range is still a major challenge. Here, wood-based Fe₃O₄ composites with excellent microwave absorption properties and high mechanical strength were prepared by alkaline sulfite method, in-situ co-precipitation method and compression densification method. The results showed that the magnetic Fe₃O₄ was densely deposited in the wood cells, and the prepared wood-based microwave absorption composites had both high electrical conductivity, magnetic loss, excellent impedance matching performance and attenuation performance, as well as effective microwave absorption properties. In the frequency range of 2-18 GHz, the minimum reflection loss value was -25.32 dB. At the same time, it had high mechanical properties. Compared with the untreated wood, its modulus of elasticity (MOE) in bending increased by 98.77%, and modulus of rapture (MOR) in bending improved by 67.9%. The developed wood-based microwave absorption composite is expected to be used in electromagnetic shielding fields such as anti-radiation and anti-interference.

High-efficient adsorption for versatile adsorbates by elastic reduced graphene oxide/Fe3O4 magnetic aerogels mediated by carbon nanotubes

Fabrication of highly elastic three-dimensional aerogel adsorbents with outstanding adsorption capacities is a long pursuit for the treatment of industrial contaminated water. In this work, a magnetic reduced graphene oxide (rGO)/Fe₃O₄/carbon nanotubes (CNTs) aerogel material was constructed by the electrostatic attraction between the negatively charged GO and positively charged CNTs following a one-pot water bath treatment. The as-synthesized aerogel demonstrated high compressive stress (28.4 kPa) and lower density (24.11 mg/cm³) with exceptional adsorption capacities for versatile adsorbates which are attributed to CNTs and magnetic Fe₃O₄ nanoparticles. The effect of pH, initial concentration of adsorbates (dyes, Cd (ІІ) ions, organic solvents, and pump oil), content of CNTs and cyclic times on the adsorption capacities of the aerogel were investigated in detail. Furthermore, from simulation, the adsorption kinetics, and thermodynamics of the aerogel for adsorbates were more satisfied by endothermic quasi-second-order kinetic model with characteristic physical adsorption. Thus, the optimized rGO/Fe₃O₄/CNTs-10 aerogel adsorbent can be used as a powerful and versatile tool to deal with contaminated industrial or domestic wastewater.

Tuning the intrinsic catalytic sites of magnetite to concurrently enhance the reduction of H2O2 and O2: Mechanism analysis and application potential evaluation

Heterogeneous Fenton-like process based on H₂O₂ activation has been widely tested for water purification, but its application still faces some challenges such as the use of high doses of chemicals (including catalysts and H₂O₂). Herein, a facile co-precipitation method was utilized for small-scale production (∼50 g) of oxygen vacancies (OVs)-containing Fe₃O₄ (V_o-Fe₃O₄) for H₂O₂ activation. Experimental and theoretical results collaboratively verified that H₂O₂ adsorbed on the Fe site of Fe₃O₄ tended to lose electrons and generate O₂^•-. While the localized electron from OVs of V_o-Fe₃O₄ could assist in donating electrons to H₂O₂ adsorbed on OVs sites, this allowed more H₂O₂ to be activated to ^•OH, which was 3.5 folds higher than Fe₃O₄/H₂O₂ system. Moreover, the OVs sites promoted dissolved oxygen activation and decreased the quenching of O₂^•- by Fe(III), thus promoting the generation of ¹O₂. Consequently, the fabricated V_o-Fe₃O₄ achieved much higher oxytetracycline (OTC) degradation rate (91.6%) than Fe₃O₄ (35.4%) at a low catalyst (50 mg/L) and H₂O₂ dosage (2 mmol/L). Importantly, further integration of V_o-Fe₃O₄ into fixed-bed Fenton-like reactor could effectively eliminate OTC (>80%) and chemical oxygen demand (COD) (21.3%∼50%) within the running period. This study provides promising strategies for enhancing the H₂O₂ utilization of Fe mineral.

MXene/bacterial cellulose/Fe3O4/methyltrimethoxylsilane flexible film with hydrophobic for effective electromagnetic shielding

Electromagnetic (EM) pollution has become a serious problem in modern society as it affects human lives. The fabrication of strong and highly flexible materials for electromagnetic interference (EMI) shielding applications is extremely urgent. Herein, a MXene Ti₃C₂T_x/Fe₃O₄ & bacterial cellulose (BC)/Fe₃O₄&Methyltrimethoxysilane (MTMS) flexible hydrophobic electromagnetic shielding film (SBTF_X-Y, X and Y were the number of layers of BC/Fe₃O₄ and the layers of Ti₃C₂T_x/Fe₃O₄), was fabricated. In the prepared film, MXene Ti₃C₂T_x absorbs a large amount of radio waves through polarization relaxation and conduction loss. Because of its extremely low reflectance of electromagnetic waves, BC@Fe₃O₄, as the outermost layer of the material, allows more electromagnetic waves to incident inside the material. The maximum electromagnetic interference (EMI) shielding efficiency (SE) of 68 dB was achieved for the composite film at 45 μm thickness. What's more, the SBTF_X-Y films show excellent mechanical properties, hydrophobicity and flexibility. The unique stratified structure of the film provides a new strategy for designing high-performance EMI shielding films with excellent surface and mechanical properties.

Controllable synthesis of bifunctional magnetic carbon dots for rapid fluorescent detection and reversible removal of Hg2

Mercury is one of the most toxic heavy metals, whose identification and separation are crucial for environmental remediation. Till now, it remains a significant challenge upon simultaneous detection and removal of Hg²⁺. Herein, bifunctional probe magnetic carbon dots were synthesized and optimized via systematic structure manipulation of the carbon and iron precursors towards fluorescence, Hg²⁺ adsorption and magnetic separation. The probe exhibited blue emission at 440 nm with high quantum yield of 55 % and a high paramagnetism with the saturation magnetization value of 22.70 emu/g. Furthermore, the fluorescent detection of Hg²⁺ with limit of 5.40 nM and high selectivity were achieved through surface structure manipulation with moderate -NH₂, -SH and Fe contents. As a result, the magnetic removal of Hg²⁺ was consecutively effectuated with high removal efficiency of 98.30 %. The detection and recovery of Hg²⁺ in real samples were further verified and demonstrated the excellent environmental tolerance of probe. The reusability was viable with recycling at least three turns by external magnet. This work not only provides a promising approach for simultaneous detection and removal of heavy metal pollution, but also provides an excellent example as a versatile platform for multifunction integration via the structure manipulation for other applications.

In situ construction of Fe3O4@PDA@Au multi hotspot SERS probe for trace detection of benzodiazepines in serum

The abuse of benzodiazepines is a serious health hazard that can cause damage to the central nervous system.Trace monitoring of benzodiazepines in serum can effectively prevent the damage caused by these drugs. Therefore, in this study, a Fe₃O₄@PDA@Au core-shell satellite nanomaterial SERS(Surface-Enhanced Raman Scattering) probe that integrates magnetic separation techniques and a multi-hotspot structure was synthetized by in situ growth of gold nanoparticles on the surface of PDA(Polymerized dopamine)-coated Fe₃O₄. The size and gap of Au nanoparticles on the surface of the SERS probe can be modulated by regulating the amount of HAuCl₄ to create 3D multi-hotspot structures. The good dispersion and superparamagnetic properties of this SERS probe enable it to fully contact and load the target molecules in the serum, and the applied magnetic field facilitates separation and enrichment.This process increases the molecular density and number of SERS hotspots, thereby enhancing detection sensitivity. Based on the above considerations, this SERS probe can detect traces of eszopiclone and diazepam in serum at concentrations as low as 1 μg/ml with good linearity, offering promising applications in clinical monitoring of drug concentrations in blood.

Liquid nitrogen quenching inducing lattice tensile strain to endow nitrogen/fluorine co-doping Fe3O4 nanocubes assembled on porous carbon with optimizing hydrogen evolution reaction

In this work, the lattice tensile strain of nitrogen/fluorine co-doping ferroferric oxide (Fe₃O₄) nanocubes assembled on chrysanthemum tea-derived porous carbon is induced through a novel liquid nitrogen quenching treatment (named as TS-NF-FO/PC_X-Y, TS: Tensile strain, NF: Nitrogen/Fluorine co-doping, FO: Fe₃O₄, PC: Porous carbon, X: The weight ratio of KOH/carbon, Y: The adding amount of porous carbon). Besides, the electrocatalytic activity influenced by the adding amount of porous carbon, the type of dopant, and the introduction of lattice tensile strain is systematically studied and explored. The interconnected porous carbon could improve electrical conductivity and prevent Fe₃O₄ nanocubes from aggregating. The induced nitrogen/fluorine could cause extrinsic defects and tailor the intrinsic electron state of the host materials. Lattice tensile strain could tailor the surface electronic structure of Fe₃O₄ via changing the dispersion of surface atoms and their bond lengths. Impressively, the designed TS-NF-FO/PC₅-0.25 delivers a low overpotential of 207.3 ± 0.4 mV at 10 mA/cm² and demonstrates desirable reaction dynamics. Density functional theory calculations illustrate that the electron structure and hydrogen adsorption free energy (ΔG_*H) are optimized by the synergistic effect among porous carbon, nitrogen/fluorine co-doping and lattice tensile strain, thus promoting hydrogen evolution reaction (HER) catalytic activity. Overall, this work paves the way to unravel the enhancement mechanism of HER on transition metal oxide-based materials by electronic structure and phase composition modulation strategy.

Enhanced mechanism of calcium towards uranium incorporation and stability in magnetite during electromineralization

Doping uranium into a room-temperature stable Fe₃O₄ lattice structure effectively reduces its migration. However, the synergistic or competitive effects of coexisting ions in an aqueous solution directly affect the uranium mineralization efficiency and the structural stability of uranium-bearing Fe₃O₄. The effects of calcium, carbonate, and phosphate on uranium electromineralization were investigated via batch experiments and theoretical calculations. Calcium incorporated into the Fe₃O₄ lattice increased the level and stability of doped uranium in Fe₃O₄. Uranium and calcium occupied the octahedral and tetrahedral sites of Fe₃O₄, respectively; the formation energy was only -10.23 eV due to strong hybridization effects between Fe1s, U4f, O2p, and Ca3d orbitals. Compared to the uranium-doped Fe₃O₄, uranium leaching ratios decreased by 19.2 % and 48.9 % under strongly acidic and alkaline conditions after 120 days. However, high concentrations of phosphate inhibited Fe₃O₄ crystallization. These results should provide new avenues for the development of multi-metal co-doping technologies and mineralization optimization to treat uranium-containing complex wastewater.

Combining mechanisms of black carbon and magnetic minerals in power plant fly ash

Black carbon (BC), one of the pollutants emitted from fossil fuel combustion, is closely associated with minerals and other hazardous substances. To date, little is known about the mechanisms between BC and magnetic minerals. Accordingly, further investigating the association between magnetic minerals and BC is necessary. In this work, the extraction of BC from fly ash and the magnetic fraction from BC was achieved by flotation and magnetic separation, respectively. The morphology, mineralogical composition, and magnetic properties of BC and magnetic fraction were characterized by FTIR, XRD, SEM-EDS, and vibrating sample magnetometer (VSM). The results show that BC and magnetic minerals have similar mineral compositions, rich in quartz, mullite, magnetite, and hematite. The magnetic minerals have prominent spherical characteristics and are distributed on the surface and inside the pores of BC with irregular honeycomb features. The VSM and XRD analyses show that Fe₃O₄ is the primary magnetic material. Moreover, large amounts of C, O, and Fe around and on the surface of magnetic spheres were detected by EDS, indicating that the spherical particles may be the structure of BC-coated Fe₃O₄. Pyrolysis experiments showed that the yield of the magnetic fraction in the pyrolysis product reached 60 %, far exceeding the theoretical yield of 12 % based on 5 % of doped Fe. This further proves that Fe₃O₄ was combined with a large number of organics during its formation, which may be due to coating and chemical adsorption. Quantum chemical calculations also confirmed this chemical adsorption between Fe₃O₄ with BC based on density flooding theory, in which adsorption energies ranged from -213.374 KJ/mol to -827.741 KJ/mol.

A green approach of biochar-supported magnetic nanocomposites from white tea waste: Production, characterization and plausible synthesis mechanisms

Green synthesized magnetic nanoparticles were impregnated into biochar matrix (EWTWB) to produce biochar-supported magnetic nanocomposite (GSMB). Instead of chemicals, organic matters in white tea waste extract were used as reductant, surfactant and functional capping materials. Magnetic biochar produced from traditional methods of pyrolysis (PMB) and co-precipitation (Co-PreMB) were prepared to compare their properties with GSMB. Xray Diffraction confirmed the main component of green synthesized particles is Fe₃O₄. When compared with PMB and Co-PreMB, the Fe₃O₄ produced by co-precipitation method has higher purity while the products from green synthesis method are complex and contain a small portion of other iron-containing compounds. As a consequence, Co-PreMB has higher saturation magnetisation value than GSMB, which are 31.3 and 11.5 Am²/kg, respectively. GSMB was also found to be less stable in acidic conditions (pH ≤ 4) than Co-PreMB. However, the SEM results exhibited that spherical magnetic nanoparticles (20-50 nm) were successfully formed and distributed on the surface of biochar via green synthesis method while serious aggregation happened on the surface of Co-PreMB. According to the result of BET, the surface area of GSMB increased dramatically from 0.2 m²/g to 59.7 m²/g. Fourier Transform Infrared spectroscopy and Xray photoelectron spectroscopy results showed the presence of rich oxygen-containing functional groups on the GSMB The high surface area and rich functional groups making the green synthesis method a very promising greener way to prepare magnetic biochar for the purpose of wastewater treatment.

Multiple roles of ferric chloride in preparing efficient magnetic hydrochar for sorption of methylene blue from water solutions

Highly efficient and cheap magnetic materials have application prospects in wastewater treatment. Herein, Fe₃O₄-loaded hydrochar (HC-Fe₃O₄) was obtained from hydrothermal carbonization (HTC) of bamboo with FeCl₃ and then added with FeCl₃ to form a magnetic sorbent via simple precipitation. The HC-Fe₃O₄ was characterized with various instruments. The characterizations show FeCl₃ plays at least two roles as a catalyst and an oxidant in HTC. The specific surface area of hydrochar enlarged from 39.9731 to 60.9887 m²·g^-1 after the addition of FeCl₃ during HTC, which showed FeCl₃ acted as a catalyst in HTC. XRD indicated Fe₃O₄ was formed by the structure of HC-Fe₃O₄, which indicated Fe(III) was reduced to Fe(II) during HTC. Sorption of methylene blue (MB) onto HC-Fe₃O₄ was better fitted by the Langmuir isotherm and pseudo-second-order kinetic models. Sorption is a spontaneous thermodynamic endothermic process and HC-Fe₃O₄ is easily separated by an applied magnetic field and reused.

Three-dimensional electro-Fenton system supplied with a nanocomposite of microbial cellulose/Fe3O4 for effective degradation of tetracycline

In this study, the catalytic activity of the modified microbial cellulose/Fe₃O₄ (MMC/ Fe₃O₄) composite was studied for tetracycline (TC) degradation and mineralization in a three-dimensional electro-Fenton system (3D-EF). The MC/Fe₃O₄ was modified at 400 °C for 60 min. The MMC/ Fe₃O₄ was fully analyzed (morphological, structural, chemical properties). Complete degradation and 65% mineralization of TC was achieved in the 3D-EF process (0.5 g L^-1 MMC/ Fe₃O₄, 10 mM NaCl electrolyte, and neutral pH) within 20 min and electrical energy consumption (EEC) 0.86 kwh g^-1 TC under the 6.66 mA cm^-2. High degradation efficiency TC, in 3D-EF system was attributed to significant single oxygen (¹O₂), superoxide(O₂^•-) participation and less to Hydroxyl radical (OH^•). Reusability of the MMC/ Fe₃O₄ was successfully carried out for five consecutive runs. Accordingly, greencompositeof MMC/ Fe₃O₄ can be considered as an efficient and durable particle electrode (PE) to degrade and mineralize emerging pollutants in an aquatic environment.

Magnetic Fe3O4@ZIF-8 nanoparticles as a drug release vehicle: pH-sensitive release of norfloxacin and its antibacterial activity

Metal-organic frameworks (MOFs) have a high specific surface area and inherent biodegradability due to their unique structure and composition. As well, owing to the properties of nanomaterials and especially their magnetic features, Fe₃O₄ nanoparticles and MOFs composite materials have great potential in the design and application of drug release. The present work: firstly, investigated norfloxacin loading in magnetic metal organic framework (Fe₃O₄@ZIF-8); and secondly, studied the release of norfloxacin and its antibacterial activity. Results showed the release efficiencies reached 97 % at 310 K after 84 h (pH 7.4). Drug release behavior was tested at various pH levels and it was found that Fe₃O₄@ZIF-8 has pH-sensitive properties. Furthermore, the release model calculation illustrated that the release process fitted well to the Bhaskar model. The magnetic properties of Fe₃O₄@ZIF-8 confirmed that the composite has potential application for a targeted drug delivery system. The mechanism of pH-responsive norfloxacin release was combined with diffusion, ion exchange and electrostatic repulsion. Furthermore, the antibacterial activities of Fe₃O₄@ZIF-8 and NOR-Fe₃O₄@ZIF-8 were tested against Escherichia coli. Results showed that Fe₃O₄@ZIF-8 had good biocompatibility while NOR-Fe₃O₄@ZIF-8 can deter or inhibit the actions of microorganisms.

Fenton degradation of ofloxacin antibiotic using calcium alginate beads impregnated with Fe3O4-montmorillonite composite

The primary aim of this study is to develop an economical, stable, and effective heterogeneous catalyst for wastewater remediation via the Fenton oxidation process. For this purpose, Fe₃O₄-montmorillonite alginate (FeMA) composite beads were synthesized by entrapping Fe₃O₄-montmorillonite in calcium alginate beads. The performance of the catalysts was evaluated via the Fenton degradation of ofloxacin (OFL), an antibiotic that is frequently detected in water bodies. The physiochemical properties of the FeMA composite beads were characterized using X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscope/energy dispersive X-ray (FESEM/EDX), Brunauer-Emmett-Teller (BET) analysis, Fourier transform infrared (FTIR) spectroscopy, and thermogravimetric analysis (TGA). FeMA composite beads were found to have a higher surface area, higher porosity, and better thermal stability compared to pristine alginate beads. The composite beads were subsequently used for Fenton degradation of ofloxacin (OFL) in an aqueous solution. The effects of Fe₃O₄-montmorillonite loading on alginate, FeMA composite beads dosage, initial solution pH, initial OFL concentration, different oxidants, H₂O₂ dosage, reaction temperature, and inorganic salts on Fenton degradation of OFL in aqueous solution was investigated. The results revealed that the percentage of OFL degradation reached about 80 % under optimized conditions, while the total organic carbon (TOC) removal reached about 53 %. The entrapment of Fe₃O₄-montmorillonite in alginate beads results in less iron ions leaching compared to previous observation, and the efficiency remains constant over the five cycles investigated. The kinetics of the Fenton degradation process are best fitted to the pseudo-first-order kinetic model. It is therefore believed that FeMA composite beads can be a promising material for wastewater remediation via the Fenton oxidation process.

Dual step-scheme heterojunction with full-visible-light-harvesting towards synergistic persulfate activation for enhanced photodegradation

The occurrence of micropollutants in aquatic media raises great concern because of their biological toxicity and persistence. Herein, visible-light-driven photocatalyst titanium dioxide/graphitic carbon nitride/triiron tetraoxide (TiO_2-x/g-C₃N₄/Fe₃O₄, TCNF) with oxygen vacancies (O_v) was prepared via a facile hydrothermal-calcination method. The complementary visible-light co-absorption among semiconductors enhances light-harvesting efficiency. The built-in electric field formed during Fermi level alignment drives photoinduced electron transfer to improve charge separation across the interfaces. The increased light-harvesting and favorable energy band bending significantly enhance the photocatalytic performance. Therefore, TCNF_-5-500/persulfate system could effectively photodegrade bis-phenol A within 20 min under visible-light irradiation. Moreover, the superior durability, non-selective oxidation, adaptability, and eco-friendliness of the system were confirmed by different reaction conditions and biotoxicity assessment. Furthermore, the photodegradation reaction mechanism was presented according to the major reactive oxygen species produced in the system. Thus, this study constructed a dual step-scheme heterojunction by tuning visible-light absorption and energy band structure to increase the charge transfer efficiency and photogenerated carrier lifetime, which has great potential for environmental remediation using visible photocatalysis.

Synthesis of a novel pH-responsive Fe3O4/chitosan/agarose double nanoemulsion as a promising Nanocarrier with sustained release of curcumin to treat MCF-7 cell line

Nanotechnology, using drug carriers, has gained remarkable achievements in treating cancer by inhibiting the adverse effects of traditional therapeutic methods, such as applying curcumin. Using chitosan could help to target tumors, without harming healthy cells. Also, magnetic iron oxide provides a high specific area to increase the capability of the nano-scale vehicle to load curcumin. A double emulsion hydrogel of Fe₃O₄/chitosan/agarose was synthesized and curcumin was loaded with loading and entrapment efficacies of 48.25 % and 87.5 %, respectively. The crystalline nature of the nanocomposites was confirmed by X-ray diffraction, and Fourier transforms spectroscopy investigated the functional groups of the components. The results of DLS and zeta potential showed proper particle size and surface charge, which are important for making the EPR effect and stability of the developed drug delivery system. The release profile of curcumin from the nanocarrier presented a sustained and pH-responsive release, avoiding overdosage and decreasing side effects. The best kinetic model that the release data could be fitted on was Hixon-Crowell. Finally, from the cytotoxicity of the prepared nanocomposite, it was concluded that the nanocarrier is biocompatible, and from flow cytometry analysis, a high apoptosis percentage proved that the effect of the designed drug delivery system on MCF-7 cell lines is programmed. Hence, this curcumin-loaded double emulsion could mitigate cancer therapy restrictions, with a minimum toxic effect on cultured cells.

One-step preparation of lignin-based magnetic biochar as bifunctional material for the efficient removal of Cr(VI) and Congo red: Performance and practical application

The lignin-based magnetic biochar (LMB) was fabricated with a facile one-step solvothermal method. The spherical Fe₃O₄ was successfully loaded on the lignin-based biochar. LMB could efficiently remove Cr(VI) and Congo red (CR) synergistically with the adsorption of biochar and the catalytic/reduction of Fe₃O₄. LMB showed a removal efficiency of 100 % for Cr(VI) (100 mg/L) at 30 min. The LMB could be a catalyst to activate persulfate (PS) to degrade CR. The LMB + PS system showed a removal efficiency of 94.3 % for CR at 60 min. Moreover, LMB could simultaneously remove 41.5 % of Cr(VI) and 91.5 % of CR in the mixed Cr(VI) and CR solution. The simulated wastewater studies showed that LMB exhibited superior high Cr(VI) (100 %) and CR (82 %) removal efficiencies with the coexistent of anions, cations, and organic matter. LMB can be effectively applied to remove Cr(VI) and CR and purify different contaminated water bodies.

A magnetic MIL-125-NH2@chitosan composite as a separable adsorbent for the removal of Cr(VI) from wastewater

Metal-organic frameworks (MOFs) are gradually used since of their huge specific surface area and superior pore structure. However, there are problems such as easy aggregation and difficult separation in water treatment. In this study, we prepared composite microspheres (FMCS-1) by modifying MIL-125-NH₂ with Fe₃O₄ and chitosan. The structural characterization and performance analysis of the materials showed that the introduction of chitosan effectively prevents the stacking of MOFs. The magnetic test manifested that Fe₃O₄ solved the problem of the difficult separation of MOFs from water. The removal potential of toxic Cr(VI) was tested by adsorption experiments. The isotherm model indicated that FMCS-1 is a single molecular layer adsorbent with a maximum adsorption capacity of 109.46 mg/g at pH = 2. The adsorption kinetics showed that the adsorption of Cr(VI) by FMCS-1 was chemical adsorption. The acid resistance test demonstrated that FMCS-1 can exist stably in acid solutions. The recycling experiments proved that the adsorbent can be reused and the removal percentage still reaches 50 % after 5 cycles. This work expands the application of MOFs in water treatment and also provides an effective adsorbent for Cr(VI) removal.

Electro-oxidation of heavy metals contaminated water using banana waste-derived activated carbon and Fe3O4 nanocomposites

The main objective of this study was to banana waste-derived activated carbon (BWAC) make a high pore surface area was prepared and composited with Fe₃O₄ via a facile hydrothermal method. Various physiochemical characteristics of the prepared samples were evaluated using XRD, FTIR, FESEM, Raman Spectroscopy and XPS analysis. In addition, cyclic voltammetry and electrochemical impedance spectroscopy analyses were performed to determine the electrochemical properties of the prepared samples. The Fe₃O₄/BWAC sample showed a higher capacitance (285 F g^-1) than BWAC at the same scan rate of 10 mV s^-1. The capacitive deionization (CDI) cell configuration was varied, and its electro-sorption and defluoridization efficiencies were analyzed during the lead (Pb²⁺) removal 90%. An asymmetric combination of electrodes in the CDI cell exhibited better heavy metal removal performance, possibly due to the synergistic effect of the high surface area and the balance between the active adsorption site and the overlapping effect of the EDL. As a result, Fe₃O₄/BWAC could be a potential resource for supercapacitors and CDI electrodes, and the novel Fe₃O₄/BWAC nanocomposites outstanding performance suggests that they could be helpful for future energy storage and environmental applications.

Electrochemical-enhanced Fe3O4/biochar activates peroxymonosulfate (E/nano-Fe3O4/BC/PMS) for degradation of oxytetracycline

To find cost-effective and environmentally friendly free radical activators to stimulate peroxymonosulfate (PMS) oxidative degradation of organic pollutants, nano-Fe₃O₄/biochar (BC) composites were prepared and characterized in this work to examine their effectiveness in stimulating PMS oxidative degradation of Oxytetracycline (OTC) in water enhanced with electrochemical degradation. When the mass ratio of nano-Fe₃O₄ to BC is 1:1, the catalyst nano-Fe₃O₄/BC exhibits the most obvious degradation effect on OTC. After 4 h of degradation, the OTC concentrations were reduced from 20 to 2.65 mg L^-1, while treated with a single nano-Fe₃O₄ and a single BC are reduced by only 67.7% and 61.8%. Anions HCO₃^- and H₂PO₄^- significantly inhibit OTC degradation, and HCO₃^- has a stronger inhibitory effect than H₂PO₄^-, while Cl^- and NO₃^- can promote OTC degradation. Quenching test and electron spin paramagnetic resonance (EPR) detection showed that singlet oxygen (¹O₂) was the main active species in the degradation process, followed by hydroxyl radical (·OH). When reused for the third time, the removal rate of OTC by nano-Fe₃O₄/BC composites with mass ratios of 1:4, 1:2 and 1:1 was still more than 70%. Therefore, the nano-Fe₃O₄/BC composite is a promising PMS activator, which can realize the rapid oxidative degradation of OTC.

Conversion and reducing agent effect on zero valent iron into Fe3O4 for photocatalytic degradation under UV light irradiation

Conversion and reducing agent (NaBH₄) effect on zero valent iron into Fe₃O₄ nanoparticles with diverse molar ratios of reducing agent was produced through chemical reduction technique. The structural, optical, vibrational analyses were executed via XRD, UV-Vis, Raman, and FT-IR analysis. The crystallite size obtained were 35 nm, 27 nm, and 18 nm for Fe:NaBH₄ (1:1), Fe:NaBH₄ (1:2) and Fe:NaBH₄ (1:3). The morphology of the Fe:NaBH₄ (1:1) was not in good orientation with higher dimensions. As explored in Fe:NaBH₄ (1:2) and (1:3) samples, there is a proper growth of nanoneedles and nanosheets formation. This was due to the addition of reducing agent which greatly helped in enhancement of morphology. The prepared photocatalysts were tested to reduce Malachite Green (MG) under UV illumination. The pure dye solution obtained 57% efficiency after irradiation. Fe:NaBH₄ (1:3) photocatalyst achieved 97% efficiency on reducing pollutants. The rate constant values calculated was 0.007, 0.013, 0.02 and 0.03 min^-1 for pure, Fe: NaBH₄ (1:1), Fe: NaBH₄ (1:2) and Fe: NaBH₄ (1:3) assisted MG samples. The as prepared photocatalyst is more potential one on removal of toxic pollutants from wastewater which is due to the better enhancement of nanoneedles and nanosheets oriented by the effect of reducing agent. The advantage of Fe₃O₄ nanoparticles for wastewater is that the removal of these nanoparticles can be ease with magnetic separation methods. On considering the advantage of removing of photocatalyst and efficiency, this prepared product is suitable one for wastewater remediation process in future days.

Electrochemical-enhanced MoS2/Fe3O4 peroxymonosulfate (E/ MoS2/Fe3O4/PMS) for degradation of sulfamerazine

Seeking effective methods to degrade organic pollutants has always been a hot research field. In this work, MoS₂/Fe₃O₄ catalyst was synthesized by hydrothermal method with MoS₂ as carrier to construct an advanced oxidation system of electrochemical enhanced MoS₂/Fe₃O₄-activated peroxymonosulfate (E/MoS₂/Fe₃O₄/PMS). The materials were characterized by X-ray diffraction, transmission electron microscopy and X-ray photoelectron spectroscopy. The degradation efficiency of sulfamerazine (SM1) by E/MoS₂/Fe₃O₄/PMS system was investigated and reaction mechanism was explored. The results showed that the removal rates of SM1 within 30 min were 31%, 20% and 89% with Fe₃O₄, MoS₂ and MoS₂/Fe₃O₄ as catalysts, respectively. The characterization results revealed that Fe(III) on the surface of Fe₃O₄ was reduced to Fe(II) and Mo(IV) was oxidized to Mo(VI) in the presence of MoS₂. The synergistic effect between Fe₃O₄ and MoS₂ enhanced the PMS decomposition and improved the SM1 removal efficiency. Free radical quenching experiments showed that SO₄^-⋅, ·OH, O₂· and ¹O₂ were all involved in the degradation of SM1, and the effect of ¹O₂ was more significant than other active substances. Low concentrations of Cl^- and humic acid (HA) had no significant inhibitory effect on the degradation of SM1, while HCO₃^- had a significant inhibitory effect on the E/MoS₂/Fe₃O₄/PMS system. In addition, catalyst cycling experiments showed that MoS₂/Fe₃O₄ maintained good stability before and after the catalytic reaction process.

Photothermally responsive chitosan-coated iron oxide nanoparticles for enhanced eradication of bacterial biofilms

This work developed a pH/NIR responsive antibacterial agent (CS-FeNPs) composed of chitosan (CS) and Fe₃O₄ nanoparticles (FeNPs). CS triggers bacterial attraction through surface charge, while Fe acts as a photothermal agent (PTA). The CS-Fe NPs exhibited antibacterial and antibiofilm activity against both bacteria (G+/G-). However, higher activity was observed against bacteria (G-) due to electrostatic interactions. The CS-FeNPs bind with the bacterial membrane through electrostatic interactions and disturb bacterial cells. Later, in an acidic environment, CS-FeNPs bind with bacterial membrane, and NIR irradiation leads the antibacterial activity. CS-FeNPs exhibited a potential photothermal conversion efficiency (η) of 21.53 %. Thus, it converts NIR irradiation into heat to kill the bacterial pathogen. The CS-FeNPs were found to be less cytotoxic with great antibacterial efficiency on planktonic bacteria and their biofilm, which indicates that they deserve to develop potential and safe treatment strategies for the treatment of bacterial infections.

Fabrication of pH-sensitive magnetic metal-organic framework for controlled-release of heparin

Heparin, the most widely used anticoagulant drug in the world today, suffers from the risk of overdose and a short serum half-life, limiting its clinical applications. Concerning the controlled, sustained, and targeted release of heparin, a delivery system was fabricated in this research using the layered composites of Fe₃O₄ magnetic particles and pH-sensitive metal-organic framework, Fe₃O₄@ZIF-8. The composite demonstrated a high loading capacity for the heparin, 66.8 mg/g. The composite had a saturation magnetization of 1.5 emu/g and thus owned a magnetic targeting function, i.e. drug can be centered at a certain point using an external magnetic field. The anticoagulant activity was assessed by monitoring their activated partial thromboplastin time. The results showed that the pH-responsive and sustained release of the heparin reduced the systemic adverse effects associated with high concentrations. Moreover, control over the dose exhibited excellent anticoagulant features with fewer side effects.

Insight into enhanced acetic acid production from food waste in anaerobic hydrolysis/acidification with Fe3O4 supplementation

Fe₃O₄ supplementation has been reported as a high-efficient approach to enhance biogas production in anaerobic digestion (AD). Volatile fatty acids (VFAs), especially acetic acid (HAc), are considered as important products in acidification process of AD. However, the possible mechanisms involved in promotion effect of Fe₃O₄ on HAc production in hydrolysis and acidification processes of AD have not been comprehensively studied. This study first investigated the promotion effect of Fe₃O₄ on hydrolysis, acidogenesis and acetogenesis stages of AD and proposed the underlying mechanisms, using food waste (FW) as the feedstock, which is considered as the most suitable substrate for VFAs production. Results indicated that the HAc production (77.38 g-C/kg-VS) was enhanced by 79 % in AD of FW with addition of 10 g/L Fe₃O₄. The duration to reach the maximum HAc production was also shortened from 14 days to 10 days. The AD tests using model substrates revealed that Fe₃O₄ enhanced hydrolysis, acidogenesis, and degradation of propionic acid, thus resulting in enhanced HAc production. The enhanced activities of hydrolytic and acid-forming enzymes, and electron transport system (ETS) with Fe₃O₄ addition further demonstrated its function as an electron acceptor to stimulate electron transfer and accelerate microbial metabolisms in AD, which contributed to the enhanced HAc production from FW.

In situ construction of Fe3O4@FeOOH for efficient electrocatalytic urea oxidation

Substituting water oxidation half of water splitting with anodic oxidation of urea can reduce the cost of H₂ production and provide an avenue for treating urea-rich wastewater. However, developing an efficient and stable electrocatalyst is necessary to overcome the indolent kinetics of the urea oxidation reaction (UOR). Accordingly, we have used the Schikorr reaction to deposit Fe₃O₄ particles on the nickel foam (Fe₃O₄/NF). Results from the various analysis indicated that under the operational conditions, Fe₃O₄ underwent surface reconstruction to produce a heterolayered structure wherein a catalytically active FeOOH layer encased a conducting Fe₃O₄. Fe₃O₄/NF outperformed RuO₂ as a UOR catalyst and delivered a current density of 10 50 and 100 mA cm^-2 at low applied potentials of 1.38 1.42 and 1.46 V, respectively, with a Tafel slope of 28 mV dec^-1. At the applied potential of 1.4 V, Fe₃O₄/NF demonstrated a turnover frequency (TOF) of 2.8 × 10^-3 s^-1, highlighting its superior intrinsic activity. In addition, a symmetrical urea electrolyzer constructed using Fe₃O₄/NF produced the current density of 10 mA cm^-2 at a cell voltage of 1.54 V.

Synergetic integration of catalase and Fe3O4 magnetic nanoparticles with metal organic framework for colorimetric detection of phenol

Toxic phenol pollutants pose a great threat to the environment, it is urgent to develop an efficient and recyclable method to monitor phenol. Herein, we reported the synthesis of catalase-Fe₃O₄@ZIF-8 (CAT-Fe₃O₄@ZIF-8) through a novel amino-acid-boosted one-pot embedding strategy that synergically integrated catalase and magnetic Fe₃O₄ nanoparticles with ZIF-8. As expected, CAT-Fe₃O₄@ZIF-8 exhibited enhanced catalytic activity compared with Fe₃O₄@ZIF-8, CAT@ZIF-8 and catalase. Depending on the satisfactory performance of CAT-Fe₃O₄@ZIF-8, a colorimetric detection platform for phenol based on CAT-Fe₃O₄@ZIF-8 was constructed. The corresponding detection limit was as low as 0.7 μM, and a wide linear range of 5-100 μM was obtained. Besides, CAT-Fe₃O₄@ZIF-8-based colorimetric detection platform has been verified to possess high stability and recyclability. The proposed method was proven to have potential practical applications in the field of water treatment, which would advance efficient, recyclable monitoring of water quality.

Facile synthesis of superparamagnetic thiamine/Fe3O4 with enhanced adsorptivity toward divalent copper ions

The development of environmentally friendly adsorbents has been extensively carried out to overcome the detrimental effects of heavy metal accumulation, which has persistently become a global ecological problem. In pursuit of generating eco-friendly adsorbents, a green method for synthesizing thiamine functionalized-Fe₃O₄ (FT) was developed in this study. A one-step chemical oxidation and functionalization technique was used to prepare FT using the ammonia-containing solvent. A molar ratio of ammonia:Fe:thiamine of 15:1:1 was shown to produce FT15 with high yield, adsorptivity, and purity. XRD, XPS, FTIR, SEM, and SQUID characterization of FT15 revealed the formation of superparamagnetic thiamine functionalized Fe₃O₄ in their particles. This superparamagneticity facilitates the easy recovery of FT15 particles from the waste-containing solution by using an external magnetic force. The batch adsorption of Cu(II) onto FT15 showed the best fit with the Sips adsorption isotherm model with a maximum adsorption capacity of 426.076 mg g^-1, which is 5.69-fold higher capacity than the control unmodified Fe₃O₄ (F15). After five adsorption-desorption cycles, the FT15 can maintain up to 1.95-fold higher capacity than the freshly synthesized F15. Observation on the physicochemical properties of the post-adsorption materials showed the contribution of an amine group, pyrimidine ring, and the thiazolium group of thiamine in boosting its adsorption capacity. This study provides important findings to advance the adsorptivity of magnetic adsorbents with promising recoverability from aqueous solution by employing naturally available and environmentally friendly compounds such as thiamine.

Tailor the crystal planes of MIL-101(Fe) derivatives to enhance the activity of SCR reaction at medium and low temperature

Mainly exposed crystal facets and controllable morphology play a key role in the final performance of the preparation of specific nanomaterials. In the present study, a metal-organic framework pyrolysis method without adding solvent modifiers was developed. By adding CO in the calcination atmosphere to change atmosphere ratio, Fe₃O₄ nanostructures are exposed with different crystal planes and evaluated their performance in NH₃-SCR reaction. This study proves that SCR catalytic activity of Fe₃O₄ nanocrystals is dependent on morphology and crystal facet. Compared with materials exposed (100), catalysts with more (111) show stronger deNO_x performance. The preferential exposure of Fe₃O₄ (111) crystal facets increases the concentration of adsorbed oxygen on the catalyst, showing higher surface acidity, and enhances the interaction among NO, O₂ and catalyst, which is conducive to SCR reaction. This is supported by DFT calculations. The results present a great application prospect in preparing nanomaterials with specific crystal structures to effectively treat pollutants.

Mechanistic insight and bifunctional study of a sulfide Fe3O4 coated biochar composite for efficient As(III) and Pb(II) immobilization in soils

Trace elements contamination in soil has aroused global concern nowadays, but the efficient, multifunctional, and economically viable method still remains a major challenge. In this research study, a sulfide Fe₃O₄ coated biochar composite (S/Fe-BC) has been synthesized successfully and applied to As(III)/Pb(II) co-contaminated soil. The immobilization efficiency of S/Fe-BC (2%) for the two elements exceeded 90%, and could ensure the synchronous and efficient immobilization in a wide range of pH (4.0-8.0). The TCLP-As and Pb amounts were sharply dropped after 28 days of stabilization; Meanwhile, a majority of exchangeable and carbonate-bound fractions of As and Pb were transferred into the less accessible residuals. Compared with Fe₃O₄ coated BC, the good immobilization performance of S/Fe-BC was mainly related to the enhancement of specific surface area, improvement of ionic exchange process, followed by the increase of Pb(II) precipitation and As(III) oxidation. Furthermore, competitive and synergistic effects were observed. In depth characterization analyses revealed the simultaneous immobilization mechanisms involving the adsorption, precipitation (Pb(OH)₂, PbSO₄, and PbS), co-precipitation (PbFeAsO₄(OH)), and oxidation. Conclusively, outstanding performance of S/Fe-BC composite is considered as a good multifunctional potential candidate for the immobilization of trace elements from a soil system.

Rapid removal of chloramphenicol via the synergy of Geobacter and metal oxide nanoparticles

The wide use of chloramphenicol and its residues in the environments are an increasing threat to human beings. Electroactive microorganisms were proven with the ability of biodegradation of chloramphenicol, but the removal rate and efficiency need to be improved. In this study, a model electricigens, Geobacter metallireducens, was supplied with and Fe₃O₄ and MnO₂ nanoparticles. Five times higher chloramphenicol removal rate (0.71 d^-1) and two times higher chloramphenicol removal efficiency (100%) was achieved. Fe₃O₄ and MnO₂ nanoparticles highly increased the current density and NADH-quinone oxidoreductase expression. Fe₃O₄ nanoparticles enhanced the expression of alcohol dehydrogenase and c-type cytochrome, while MnO₂ nanoparticles increased the transcription of pyruvate dehydrogenase and Type IV pili assembly genes. Chloramphenicol was reduced to a type of dichlorination reducing product named CPD3 which is a benzene ring containing compound. Collectively, Fe₃O₄ and MnO₂ nanoparticles increased the chloramphenicol removal capacity in MFCs by enhancing electron transfer efficiency. This study provides new enhancing strategies for the bioremediation of chloramphenicol in the environments.

An environmentally benign synthesis of Fe3O4 nanoparticles to Fe3O4 nanoclusters: Rapid separation and removal of Hg(II) from an aqueous medium

In the field of nanotechnology, nanoadsorbents have emerged as a powerful tool for the purification of contaminated aqueous environments. Among the variety of nanoadsorbents developed so far, magnetite (Fe₃O₄) nanoparticles have drawn particular interest because of their quick separation, low cost, flexibility, reproducibility, and environmentally benign nature. Herein, we describe a new strategy for the synthesis of Fe₃O₄ nanoclusters, which is based on the use of naturally available edible mushrooms (Pleurotus eryngii) and environmentally benign propylene glycol as a solvent medium. By tuning the temperature, we successfully convert Fe₃O₄ nanoparticles into Fe₃O₄ nanoclusters via hydrothermal treatment, as evidenced by transmission electron microscopy. The Fe₃O₄ nanoclusters are functionalized with an organic molecule linker (dihydrolipoic acid, DHLA) to remove hazardous Hg(II) ions selectively. Batch adsorption experiments demonstrate that Hg(II) ions are strongly adsorbed on the material surface, and X-ray photoelectron and Fourier transform infrared spectroscopy techniques reveal the Hg(II) removal mechanism. The DHLA@Fe₃O₄ nanoclusters show a high removal efficiency of 99.2 % with a maximum Hg(II) removal capacity of 140.84 mg g^-1. A kinetic study shows that the adsorption equilibrium is rapidly reached within 60 min and follows a pseudo second-order kinetic model. The adsorption and separation system can be readily recycled using an external magnet when the separation occurs within 10 s. We have studied the effect of various factors on the adsorption process, including pH, concentration, dosage, and temperature. The newly synthesized superparamagnetic DHLA@Fe₃O₄ nanoclusters open a new path for further development of the medical, catalysis, and environmental fields.

Pyrene contaminated soil remediation using microwave/magnetite activated persulfate oxidation

Polycyclic aromatic hydrocarbons (PAHs) are important mutagen prevalent in the contaminated sites, bringing potential risks to human health. Iron oxides are important natural components in soils. Pyrene removal in soil using persulfate (PS) oxidation activated by microwave (MW) and magnetite (Fe₃O₄) was investigated. Fe₃O₄ significantly promoted pyrene removal in the soil; 91.7 % of pyrene was degraded within 45 min treatment. Pyrene removal rate in the Fe₃O₄/MW/PS system was 5.18 and 3.00 times higher than that in the Fe₃O₄/PS and MW/PS systems. Increasing in Fe₃O₄ dosage, PS concentration, MW temperature, and soil moisture content in the selected range were conducive for pyrene degradation. SO₄^•-, ^•OH, O₂^•-, and ¹O₂ were responsible for pyrene degradation, and the conversion of Fe (Ⅱ) in the Fe₃O₄ to Fe (Ⅲ) contributed to the formation of O₂^•- and ¹O₂. Characteristic bands of pyrene were more obviously destroyed by the Fe₃O₄/MW/PS oxidation, in comparison with MW/PS oxidation. Ring hydroxylation and ring-opening reactions were the main degradation pathways of pyrene. The toxicities of the formed byproducts were significantly reduced after treatment. This study provided a promising option for pyrene contaminated soil remediation.