Biochar and hydrochar application influence soil ammonia volatilization and the dissolved organic matter in salt-affected soils

Biochar, which including pyrochar (PBC) and hydrochar (HBC), has been tested as a soil enhancer to improve saline soils. However, the effects of PBC and HBC application on ammonia (NH3) volatilization and dissolved organic matter (DOM) in saline paddy soils are poorly understood. In this research, marsh moss-derived PBC and HBC biochar types were applied to paddy saline soils at 0.5 % (w/w) and 1.5 % (w/w) rates to assess their impact on soil NH3 volatilization and DOM using a soil column experiment. The results revealed that soil NH3 volatilization significantly increased by 56.1 % in the treatment with 1.5 % (w/w) HBC compared to the control without PBC or HBC. Conversely, PBC and the lower application rate of HBC led to decrease in NH3 volatilization ranging from 2.4 % to 12.1 %. Floodwater EC is a dominant factor in NH3 emission. Furthermore, the fluorescence intensities of the four fractions (all humic substances) were found to be significantly higher in the 1.5 % (w/w) HBC treatment applied compared to the other treatments, as indicated by parallel factor analysis modeling. This study highlights the potential for soil NH3 losses and DOM leaching in saline paddy soils due to the high application rate of HBC. These findings offer valuable insights into the effects of PBC and HBC on rice paddy saline soil ecosystems.

Effect of wood and peanut shell hydrochars on the desiccation cracking characteristics of clayey soils

Soil cracking can significantly alter the water and nutrient migration pathways in the soil, influencing plant growth and development. While biochar usage has effectively addressed soil cracking, the feasibility of using less energy-intensive hydrochars in desiccating soils remains unexplored. This study investigates the impact of wood and peanut shell hydrochars on the desiccation cracking characteristics of clayey soil. A series of controlled environmental laboratory incubations with regular imaging was conducted to determine crack development's dynamic in unamended and hydrochar-amended soils. The results reveal that the addition of wood hydrochar at 2% and 4% dosage reduced the crack intensity factor (CIF) by 22% and 43%, respectively, compared to the unamended control soil. Similarly, the inclusion of peanut shell hydrochar at 2% and 4% lowered the CIF by 22% and 51%, respectively. The presence of hydrophilic groups on the surface of hydrochars, such as O-H, CH, and C-O-C, enhanced the water retention capacity, as confirmed by Fourier-transform infrared analysis. The CIF decrease is attributed to mitigated water evaporation rates, enabled by enhanced water retention within the hydrochar pore spaces. These findings are supported by scanning electron microscopy analyses of the hydrochar morphology. Despite CIF reduction with hydrochar incorporation, the crack length density (CLD) increased across all hydrochar-amended series. In contrast to unamended soil which exhibited pronounced widening of large cracks and extensive inter-pore voids, the incorporation of hydrochar resulted in higher CLD due to the formation of finer interconnecting crack meshes. Consequently, the unamended control soil suffered greater water loss due to heightened evaporation rates. This study sheds new light on the potential of hydrochars in addressing desiccation-induced soil cracking and its implications for water conservation.

Coupling of struvite crystallization and aqueous phase recirculation for hydrochar upgrading and nitrogen recovery during hydrothermal carbonization of sewage sludge

Recycling of aqueous phase (AP) as a by-product after hydrothermal carbonization (HTC) of sewage sludge (SS) has been of interest. The combination of magnesium ammonium phosphate (MAP) or the so-called struvite crystallization and aqueous phase (AP) recirculation has great potential for resource recovery and hydrochar enhancement. In this study, both the aqueous phase of HTC after MAP recovery of NH4+-N (AP-MAP) and the untreated aqueous phase of HTC (AP-HTC) were reused for HTC of fresh SS, and both aqueous phases were recycled four times. The effects of the two AP cycles on the properties of AP and hydrochar at 200, 230, and 260 °C were studied, and the effect of temperature on the two AP cycles was similar. The hydrochar produced by the AP-MAP cycle had lower nitrogen content than that of the AP-HTC cycle due to the low ammonia nitrogen (NH4+-N) content, and the combustion performance was improved. MAP recovery reduces the accumulation of NH4+-N in the AP cycle and MAP is also a high-quality fertilizer. Therefore, the combination of MAP recovery and AP recycling provides a feasible technical approach for resource utilization, eutrophic AP treatment, and production of high-quality hydrochar in the HTC process of SS.

Effect of hydrochar-doping on the performance of carbon felt as anodic electrode in microbial fuel cells

In this study, the feasibility of using hydrochars as anodic doping materials in microbial fuel cells (MFCs) was investigated. The feedstock used for hydrochar synthesis was metal-polluted plant biomass from an abandoned mining site. The hydrochar obtained was activated by pyrolysis at 500 °C in N2 atmosphere. Under steady state conditions, the current exerted by the MFCs, as well as the cyclic voltammetry and polarization curves, showed that the activated hydrochar-doped anodes exhibited the best performance in terms of power and current density generation, 0.055 mW/cm2 and 0.15 mA/cm2, respectively. These values were approximately 30% higher than those achieved with non-doped or doped with non-activated hydrochar anodes which can be explained by the highly graphitic carbonaceous structures obtained during the hydrochar activation that reduced the internal resistance of the system. These results suggest that the activated hydrochar materials could significantly enhance the electrochemical performance of bioelectrochemical systems. Moreover, this integration will not only enhance the energy generated by MFCs, but also valorize metal polluted plant biomass within the frame of the circular economy.

Analysis of perfluorinated compounds in sewage sludge and hydrochar by UHPLC LTQ/Orbitrap MS and removal assessment during hydrothermal carbonization treatment

Wastewater treatment plants have been recognized as important sinks for per- and polyfluoroalkyl substances (PFAS) because of their ineffectiveness in removing them reflecting both water and sewage sludge discharge routes. Hydrothermal treatment represents an alternative technology for treating sludge to recover energy and other valuable products. In this study, 15 PFAS were determined in sludge and hydrochar substrates using sonication-solid phase extraction procedure and analyzed using LC-Orbitrap-High Resolution-MS/MS. The method was fully validated, exhibiting very good linearity, recoveries in the range of 48 to 126 %, low detection and quantification limits with expanded uncertainty and precision below 32 % and 21.9 %, respectively. The method was applied to sludge samples from the WWTP of Ioannina city (Greece), as well as to hydrothermally treated samples under various conditions. The most abundant PFAS were PFHxA (0.5-38.3 ng g-1) and PFOS (4.4-22.1 ng g-1). Finally, the hydrothermally treated sludge samples spiked with PFAS presented removal efficiencies for total PFAS of 86.9 %, 91.8 % and 95.7 % at three spiking levels namely 10, 50 and 200 ng g-1, respectively. Results indicated that PFCAs were almost completely removed, except for PFOA, while the concentrations of PFSAs increased in the produced hydrochar with the formation of several intermediates, as detected by HR-LC-MS/MS. The results of this study demonstrate the effect of hydrothermal treatment to the fate of PFAS in sewage sludge and contribute for further studies on design and scale up of hydrothermal carbonization technology as a management option for safer disposal of municipal wastewater sludge.

Insight into Cu (II) adsorption on pyrochar and hydrochar resultant from Acacia Senegal waste for wastewater decontamination

Acacia Senegal waste (ASW) is remaining biomass following gum Arabic harvesting and has no use mentioned in the literature as of yet. This study aims to convert ASW into valuable biochar via two comparative thermal and hydrothermal techniques, which include pyrochar ASW at 300 °C (PC ASW300) and hydrochar ASW at 180 °C (HC ASW180), respectively, for Cu (II) adsorption from aqueous solutions. SEM-EDS, FTIR, XRD, and XPS were used to characterize the biochar. Adsorption performance was studied as a function of pH, contact time, and adsorbent concentration. Adsorption kinetics were best fit for a pseudo-second-order model. And thermodynamics studies revealed that Cu (II) on biochar was endothermic, spontaneous, and best fitted to the Langmuir isotherm model. Pyrochar adsorption capacity (31.93 mg g-1) was seven times that of hydrochar (5.45 mg g-1). ASW treated with phosphorus (PC H3PO4 and HC H3PO4) prior to the carbonization altered the pore structure and surface functional groups as well (O-P-O, P-CH3, and P-OH) of biochar. It was found that treating with phosphorous acid increased adsorption capacity to 141.7 mg g-1 and 22.24 mg g-1 for PC H3PO4 and HC H3PO4, respectively. The surface functional groups of biochar resulted from lignin, alkaloids, and polysaccharides combined with Cu (II) during the adsorption process via surface complexation accompanied by π-electron interaction and Cu (II) reduction. These findings shed light on the ASW biochar potential as a new green cost-effective adsorbent and drew an insightful understanding of Cu (II) adsorption performance and mechanism. It is concluded that ASW-derived biochar is highly effective and a promising alternative for Cu (II) decontamination from wastewater.

Effect of oxygen-containing functional group contents on sorption of lead ions by acrylate-functionalized hydrochar

The surface functional groups of hydrochar are crucial to its surface properties, and their contents are strongly positively correlated with the adsorption performance. In this study, acrylate-functionalized hydrochar (AHC) with varying contents of O-containing functional groups (OFGs) was synthesized via hydrothermal carbonization (HTC) of bamboo, acrylic acid and an initiator, and then deprotonated with NaOH. The AHCs were analyzed by various characterization techniques. During HTC, the higher amount of acrylic acid added led to higher carbon, oxygen and carboxyl contents, and to the larger specific surface area and pore volume of AHC. The adsorption kinetics, isotherms, thermodynamic, ionic strength and pH effects of Pb(II) on AHC were studied. Adsorption isotherms and kinetics obeyed Langmuir and pseudo-second-order models, respectively, indicating adsorption is monolayer chemical process. The adsorptive ability was well linearly related to the OFG contents of AHC. When acrylic acid was added to 25 mL during HTC, the adsorbing ability of AHC over Pb(II) reached 193.90 mg g-1. Hence, direct HTC of acrylic acid, biomass and an initiator can prepare hydrochar with controllable OFG contents, which is a prospective adsorbent for treating metal cations.

Inhibition performance of almond shell hydrochar-based fish oil emulsion gel on Klebsiella pneumonia inoculated fish skin and its characteristics

In this study, the inhibition potential against Klebsiella pneumoniae (K. pneumoniae) and the characterization of fish oil (FO) emulsion gel (EGE) containing almond shell hydrochar (AH) were investigated. Oily water of mullet liver was emulsified using tween 80, then gelled using gelatin and finally immobilized into hydrochar using an ultrasonic homogenizer. Characteristics and surface analysis of hydrochar-based emulsion gel (HEGE) were examined using FTIR and SEM. Stability, particle size distribution and zeta potential of HEGE were measured. In this study, a zeta potential of -18.46 indicated that HEGE was more stable than EGE (35.7 mV). The addition of hydrochar to the emulsion gel containing micro-droplets enabled the structure to become fully layered and stable. Time-dependent inactivation of K. pneumoniae exposed to HEGE and fixed in 6 mm-fish skin was evaluated for the first time in this study. While the highest log reduction and percent reduction in the bacterial count were achieved within 5 min with 0.87 CFU/cm2 and 86.60% with EGE, the lowest log reduction and percent reduction were achieved with 0.003 CFU/cm2 and 0.082% with HEGE in 30 min. In conclusion, the almond shell hydrochar-immobilized emulsion gel is a functional adsorbent that can inhibit K. pneumonia, and its stability and performance make it a unique candidate for further studies in this field.

Synergistic adsorption of methylene blue with carrageenan/hydrochar-derived activated carbon hydrogel composites: Insights and optimization strategies

The study explores the use of hydrochar-derived activated carbon (AC) to improve the adsorption capacity and mechanical properties of carrageenan (CAR) hydrogel beads. Four distinct samples, with carrageenan to activated carbon ratios of 1:0 (CAR), 2:1 (CAC2), 4:1 (CAC4), and 10:1 (CAC10), were prepared. These polymeric beads underwent comprehensive evaluation for their methylene blue (MB) adsorption capacity, gel content (GC), and swelling ratio (SR). Increasing activated carbon content up to 50 % of carrageenan mass significantly enhanced GC and SR by 20.57 % and 429.24 %, respectively. Various analytical techniques were employed to characterize the composites, including FTIR, XRD, Raman Spectroscopy, BET, SEM, and EDS-Mapping. Batch adsorption tests investigated the effects of pH, contact time, dye concentration, and temperature on MB adsorption. Maximum adsorption capacities for CAR, CAC10, CAC4, and CAC2 were 475.48, 558.54, 635.93, and 552.35 mg/g, respectively, under optimal conditions. Kinetic models (Elovich and pseudo-second-order) and isotherm models (Temkin for CAR and Freundlich for CAC10, CAC4, and CAC2) fitted well with the experimental data. Thermodynamic analysis showed spontaneous, exothermic MB adsorption. Primary mechanisms include electrostatic attraction, hydrogen bonding, n-π, and π-π stacking. The study highlights enhanced adsorption capacity of carrageenan hydrogel via carrageenan/activated carbon composites, providing cost-effective wastewater treatment.

One-step synthesis of phytic acid-assisted hydrochar boost selective sorption and in situ passivation of lanthanum

The rare earth metal element lanthanum (La) possesses carcinogenic, genotoxic, and accumulative properties, necessitating urgent development of an efficient and cost-effective method to remove La. However, current sorbents still encounter challenges such as poor selectivity, low sorption capacity, and high production costs. This study therefore proposes a promising solution: the creation of phytic acid-assisted sludge hydrochars (P-SHCs) to eliminate La from water and soil environments. This method harnesses phytic acid's exceptional binding ability and the economical hydrothermal carbonization process. P-SHCs exhibit robust sorption affinity, fast sorption kinetics, and excellent sorption selectivity for La when compared with pristine hydrochars (SHCs). This advantage arises from the remarkable binding ability of phosphate functional groups (polyphosphates) on P-SHCs, forming P-O-La complexes. Moreover, P-SHCs demonstrate sustained sorption efficiency across at least five cycles, with a slight decrease attributed to the loss of phosphorus species and mass during recycling. Furthermore, P-SHCs demonstrated superior economic feasibility, with a higher estimated cost-benefit ratio than that of other sorbents. Our study further validates the exceptional passivation capability of P-SHCs, showcasing relative stabilization efficiency ranging from 37.6 % to 79.6 % for La contamination. Additionally, acting as soil passivation agents, P-SHCs foster the enrichment of specific soil microorganisms such as Actinobacteria and Proteobacteria, capable of solubilizing phosphorus and resisting heavy metals. These findings present novel ideas and technical support for employing P-SHCs in combatting environmental pollution stemming from rare earth metals.

Insight into using hydrochar to alleviate ammonia nitrogen inhibition during anaerobic digestion of waste activated sludge: Performance, metagenomic and metabolomic signatures

In this study, hydrochar (HCR) was used to alleviate high ammonia inhibition to the anaerobic digestion (AD) of waste activated sludge (WAS) and to elucidate the inner microorganism mechanism. After HCR addition, the cumulative methane yield increased by 73.6 % and 35.6 % under ammonia inhibition levels of 3000 and 6000 mg/L, respectively. Metagenomic analysis showed that HCR enriched the diversity of hydrogenotrophic methanotrophs, and the relative abundances of functional microorganisms with electron transfer capabilities (Geobacteraceae bacterium etc.) were 1.5-7.8 times higher than those without HCR addition. Metabolomics analysis implied that metabolites related to fatty acid degradation, such as glutaric acid and hexadecanal, were downregulated (2.9-15.7 %) under ammonia inhibition conditions and that HCR regulates metabolites in the methane metabolic pathway. Moreover, HCR changed the methanogenic pathway from hydrogenotrophic methanogenesis to multiple pathways under ammonia inhibition conditions, especially methanolic and methylotrophic methanogenesis, which facilitated the methane yield. This study provides valuable information for understanding the inner microbial mechanism of HCR addition on alleviating high ammonia inhibition to AD of WAS, and gives basic knowledge for the application of AD of WAS under ammonia inhibition conditions.

Chromium immobilization from wastewater via iron-modified hydrochar: Different iron fabricants and practicality assessment

The recycling of industrial solid by-products such as red mud (RM) has become an urgent priority, due to their large quantities and lack of reutilization methods can lead to resource wastage. In this work, RM was employed to fabricate green hydrochar (HC) to prepare zero-valent iron (ZVI) modified carbonous materials, and conventional iron salts (IS, FeCl3) was applied as comparison, fabricated HC labeled as RM/HC and IS/HC, respectively. The physicochemical properties of these HC were comprehensively characterized. Further, hexavalent chromium (Cr(VI)) removal performance was assessed (375.66 and 337.19 mg/g for RM/HC and IS/HC, respectively). The influence of dosage and initial pH were evaluated, while isotherms, kinetics, and thermodynamics analysis were also conducted, to mimic the surface interactions. The stability and recyclability of adsorbents also verified, while the practical feasibility was assessed by bok choy-planting experiment. This work revealed that RM can be used as a high value and green fabricant for HC the effective removal of chromium contaminants from the wastewater.

Different crystalline manganese dioxide and biochar co-conditioning aerobic composting: Reduced ammonia volatilization and improved organic fertilizer quality

Aerobic composting is a sustainable and effective waste disposal method. However, it can generate massive amounts of ammonia (NH3) via volatilization. Effectively reducing NH3 volatilization is vital for advancing aerobic composting and protecting the ecological environment. Herein, two crystal types of MnO2 (α-MnO2 and δ-MnO2) are combined with biochar (hydrochar (WHC) and pyrochar (WPC), respectively) and used as conditioners for the aerobic composting of chicken manure. Results reveal that α-MnO2 (34.6%) can more effectively reduce NH3 accumulation than δ-MnO2 (27.1%). Moreover, the combination of WHC and MnO2 better reduces NH3 volatilization (48.5-58.9%) than the combination of WPC and MnO2 (15.8-40.1%). The highest NH3 volatilization reduction effect (58.9%) is achieved using the combination of WHC and δ-MnO2. Because the added WHC and δ-MnO2 promote the humification of the compost, the humic acid to fulvic acid ratio (HA/FA ratio) dramatically increases. The combination of WHC and δ-MnO2 doubled the HA/FA ratio and resulted in a net economic benefit of 130.0 RMB/t. Therefore, WHC and δ-MnO2 co-conditioning can promote compost decomposition, improving the quality of organic fertilizers and substantially reducing NH3 volatilization.

A review: Hydrochar as potential adsorbents for wastewater treatment and CO2 adsorption

To valorize the biomass and organic waste, hydrothermal carbonization (HTC) stands out as a highly efficient and promising pathway given its intrinsic advantages over other thermochemical processes. Hydrochar, as the main product obtained from HTC, is widely applied as a fuel source and soil conditioner. Aside from these applications, hydrochar can be either directly used or modified as bio-adsorbents for environmental remediation. This potential arises from its tunable surface chemistry and its suitability to act as a precursor for activated or engineered carbon. In view of the importance of this topic, this review offers a thorough examination of the research progress for using hydrochar and its modified forms to remove organic dyes (cationic and anionic dyes), heavy metals, herbicides/pesticides, pharmaceuticals, and CO2. The review also sheds light on the fundamental chemistry involved in HTC of biomass and the major analytical techniques applied for understanding surface chemistry of hydrochar and modified hydrochar. The knowledge gaps and potential hurdles are identified to highlight the challenges and prospects of this research field with a summary of the key findings from this review. Overall, this article provides valuable insights and directives and pinpoints the areas meriting further investigation in the application potential of hydrochar in wastewater management and CO2 capture.

One-step synthesis of ferrous disulfide and iron nitride modified hydrochar for enhanced adsorption and reduction of hexavalent chromium in Bacillus LD513 by promoting electron transfer and microbial metabolism

Microbial immobilization technology is effective in improving bioremediation efficiency and heavy metal pollution. Herein, Bacillus LD513 with hexavalent chromium (Cr(VI)) tolerance was isolated and immobilized on a novel ferrous disulfide (FeS2)/iron nitride (FeN) modified hydrochar (Fe3-SNHC) prepared from waste straws. The prepared Fe3-SNHC-based LD513 (FeLD) significantly improves Cr(VI) adsorption and reduction by 31.4 % and 15.7 %, respectively, compared to LD513 alone. Furthermore, the FeLD composite system demonstrates efficient Cr(VI) removal efficiency and good environmental adaptability under different culture conditions. Microbial metabolism and electrochemical analysis indicate that Fe3-SNHC is an ideal carrier for protecting LD513 activity, promoting extracellular polymer secretion, and reducing oxidative stress. Additionally, the carrier serves as an electron shuttle that accelerates electron transfer and promotes Cr(VI) reduction. Overall, FeLD is an environmentally friendly biocomposite that shows good promise for reducing Cr(VI) contamination in wastewater treatment.

Metagenomic analysis towards understanding the effects of ammonia on chain elongation process for medium chain fatty acids production

The production of medium chain fatty acids (MCFAs) through chain elongation (CE) from organic wastes/wastewater has attracted much attention, while the effects of a common inhibitor-ammonia has not been elucidated. The mechanism of ammonia affecting CE was studied by metagenomic. The lag phase duration of caproate production was increased, and the maximum caproate production rate was decreased by 43.4 % at 4 g-N/L, as compared to 0 g-N/L. And hydrochar (HC) alleviated the inhibition of ammonia at 4 g-N/L. Metagenomic analysis indicated that ammonia induced UBA4085 sp.FDU78 as the dominant microorganism, and metabolic reconstruction revealed its potential CE ability. Furthermore, ammonia inhibited the reverse β oxidation pathway and Acetyl-CoA production pathway. The tolerance of UBA4085 sp.FDU78 to ammonia was associated with the uptake of inorganic ions, energy conservation, and synthesis of osmoprotectants. The present study provided a deep-insight on the ammonia tolerance mechanism on the CE process.

Hydrothermal carbonization of corncob for hydrochar production and its combustion reactivity in a blast furnace

A key factor restricting the application of biochar in the steel industry is its high-quality upgrading. This paper evaluated the characteristics of hydrochar produced by HTC (hydrothermal carbonization) process of corncob to be used as a solid fuel. HTC temperatures (240-300 °C) and HTC water-reused times (1-3 times) were examined for their effects on hydrochar yield, physicochemical characteristics, and combustion properties. The results showed hydrochar yields, O/C, and H/C parameters decreased as HTC temperature and water-reused times increased, while its high heating value increased. Due to dehydration and decarboxylation, hydrochar showed similar characteristics to those in bituminous coal. The removal efficiency of alkali metal K reached 99% after HTC treatment. Carbonaceous hydrochar had become more compact, orderly, and stable with increasing amounts of aromatic functional groups, C = C, and C = O. Hydrochar, as a biofuel, has higher ignition energy and is more stable than corncob due to its high carbonaceous order degree. To calculate combustion kinetic parameters, the Kissinger-Akahira-Sunose (KAS) and Flynn-Wall-Ozawa (FWO) methods were applied. The results revealed that Eα (average activation energy) was quite similar between the two models. HC-300 had an Eα of 262 kJ/mol. HTC could be an efficient way to reutilize corncob biomass into clean biofuels with high calorific value.

Insights into the effect of hydrochar-derived dissolved organic matter on the sorption of diethyl phthalate onto soil: A pilot mechanism study

Biowaste-derived hydrochar is an emerging close-to-natural product and has shown promise for soil improvement and remediation, but the environmental behavior of the dissolved organic matter released from hydrochar (HDOM) is poorly understood. Focusing on the typical mulch film plasticizer diethyl phthalate (DEP), we investigated the effect of HDOM on the sorption behavior of DEP on soil. The relatively low concentration of HDOM (10 mg L-1, 25 mg L-1) decreases the sorption quantity of DEP on soil, while it increases by a relatively high concentration, 50 mg L-1. The transformation from multilayer to monolayer sorption of DEP on soil occurs as the concentration of HDOM increases. The tryptophan-like substance is the main component of HDOM sorbed to soil, reaching 49.82 %, and results in competition sorption with DEP. The soil pores are blocked by HDOM, which limits the pore filling and mass transfer of DEP, but partitioning is significantly enhanced. The surface functional groups in HDOM are similar to those in soil, and chemical sorption, mainly composed of hydrogen bonding, exists but is not significantly strengthened. We identified the specific impact of HDOM on the sorption of organic pollutants on soil and provide new insights into the understanding of the environmental behavior of hydrochar.

Cattle manure hydrochar posed a higher efficiency in elevating tomato productivity and decreasing greenhouse gas emissions than plant straw hydrochar in a coastal soil

Rehabilitation of degraded soil health using high-performance and sustainable measures are urgently required for restoring soil primary productivity and mitigating greenhouse gas (GHG) emission of coastal ecosystems. However, the effect of livestock manure derived hydrochar on GHG emission and plant productivity in the coastal salt-affected soils, one of blue carbon (C) ecosystems, was poorly understood. Therefore, a cattle manure hydrochar (CHC) produced at 220 °C was prepared to explore its effects and mechanisms on CH4 and N2O emissions and tomato growth and fruit quality in a coastal soil in comparison with corresponding hydrochars derived from plant straws, i.e., sesbania straw hydrochars (SHC) and reed straw hydrochars (RHC) using a 63-day soil column experiment. The results showed that CHC posed a greater efficiency in reducing the global warming potential (GWP, 54.6 % (36.7 g/m2) vs. 45.5-45.6 % (22.2-30.6 g/m2)) than those of RHC and SHC. For the plant growth, three hydrochars at 3 % (w/w) significantly increased dry biomass of tomato shoot and fruit by 12.4-49.5 % and 48.6-165 %, respectively. Moreover, CHC showed the highest promotion effect on shoot and fruit dry biomass of tomato, followed by SHC ≈ RHC. Application of SHC, CHC and RHC significantly elevated the tomato sweetness compared with CK, with the order of CHC (54.4 %) > RHC (35.6 %) > SHC (22.1 %). Structural equation models revealed that CHC-depressed denitrification and methanogen mainly contributed to decreased GHG emissions. Increased soil phosphorus availability due to labile phosphorus supply from CHC dominantly accounted for elevated tomato growth and fruit production. Comparably, SHC-altered soil properties (e.g., decreased pH and increased total carbon content) determined variations of GHG emission and tomato growth. The findings provide the high-performance strategies to enhance soil primary productivity and mitigate GHG emissions in the blue C ecosystems.

Lab-scale engineered hydrochar production and techno-economic scaling-up analysis

Despite the extensive use of engineered hydrochar (EHC) for contaminants adsorption in water, little is known about the scaling-up of EHC production which has kept the technology at a low readiness level (TRL). Full-scale EHC production was simulated to help bridge this knowledge gap. A systematic analysis was performed where EHC was produced from rice straw using hydrothermal carbonization (HTC) at 200 °C with iron addition. A techno-economic evaluation model was employed to simulate the production process and to estimate energy requirements, configuration, and cost scenarios for the HTC process. The minimum selling price (MSP) analysis of the engineered hydrochar was found to be almost half compared to the market price for other similar sorbents ($ 76/t vs. $136/t) suggesting that EHC production is feasible for scaling up. Finally, as a trial, the resulting material was tested for its efficacy in the adsorption of an anionic organic contaminant (e.g., Congo Red, C32H22N6Na2O6S2) in water to identify its potential for water treatment. Experimental results showed that EHC adsorbed > 95% CR suggesting significant adsorption capability and feasibility for production scale-up.

Co-hydrothermal carbonization of microalgae and digested sewage sludge: Assessing the impact of mixing ratios on the composition of primary and secondary char

The role of microalgae cultivation in wastewater treatment and reclamation has been studied extensively, as has the potential utility of the resulting algal biomass. Most methods for processing such biomass generate solid residues that must be properly managed to comply with current sustainable resource utilization requirements. Hydrothermal carbonization (HTC) can be used to process both individual wet feedstocks and mixed feedstocks (i.e., co-HTC). Here, we investigate co-HTC using microalgae and digested sewage sludge as feedstocks. The objectives were to (i) study the material's partitioning into solid and liquid products, and (ii) characterize the products' physicochemical properties. Co-HTC experiments were conducted at 180-250°C using mixed microalgae/sewage sludge feedstocks with the proportion of sewage sludge ranging from 0 to 100 %. Analyses of the hydrochar composition and the formation and composition of secondary char revealed that the content of carbonized material in the product decreased as the proportion of sewage sludge in the feedstock increased under fixed carbonization conditions. The properties of the hydrochars and the partitioning of material between the liquid phase and the hydrochar correlated linearly with the proportion of microalgae in mixed feedstocks, indicating that adding sewage sludge to microalgae had weak or non-existent synergistic effects on co-HTC outcomes. However, the proportion of sewage sludge in the feedstock did affect the secondary char. For example, adding sewage sludge reduced the abundance of carboxylic acids and ketones as well as the concentrations of higher molecular weight cholesterols. Such changes may alter the viable applications of the hydrochar.

Optimization of two-phase synthesis of Fe-hydrochar for arsenic removal from drinking water: Effect of temperature and Fe concentration

Arsenic-contaminated water is a global concern that demands the development of cost-effective treatments to ensure a safe drinking water supply for people worldwide. In this paper, we report the optimization of a two-phase synthesis for producing a hydrochar core from olive pomace to serve as support for the deposition of Fe-hydroxide, which is the active component in As(V) removal. The operating conditions considered were the initial concentration of Fe in solution in the hydrothermal treatment (phase I) and the temperature of Fe precipitation (phase II). The obtained samples were characterized for their elemental composition, solid yield, mineral content (Fe and K), phenol release, As(V) sorption capacity, and sorbent stability. Correlation analysis revealed that higher Fe concentrations (26.8 g/L) ensured better carbonization during hydrothermal treatment, increased arsenic removal, reduced concentrations of phenols in the final liquid, and improved stability of the sorbent composite. On the other hand, the temperature during Fe precipitation (phase II) can be maintained at lower levels (25-80 °C) since higher temperatures yielded lower adsorption capacity. Regression analysis demonstrated the significance of the main effects of the parameters on sorption capacity and provided a model for selecting operating conditions (Fe concentration and phase II temperature) to obtain composite sorbents with tailored sorption properties.

Revealing the generation of reactive oxygen species in hydrochar and pyrochar: Insight into rational regulation of free radicals and catalytic mechanism

The removal of organic pollutants by biochar has been extensively studied. However, the differences in the removal mechanisms of contaminants by biochar obtained from different preparation techniques have not been thoroughly elucidated. In this study, the catalytic performances of hydrochar (HC) and pyrochar (PC) were compared in the dark and light. Owing to more persistent free radicals (PFRs), greater defects and stronger charge transfer ability on the surface, PC could produce a certain concentration of superoxide radicals (•O2-) even in the dark, making its degradation efficiency for benzoic acid (BA) 11% higher than that of HC. On the contrary, when the light was turned on, HC rather than PC can generate a higher amount of hydroxyl radical (•OH), resulting in an 11% higher degradation efficiency of BA compared to PC. The improvement of catalytic performance in HC originated from its oxygen-containing functional groups (OFGs), which was beneficial for its effective production of singlet oxygen (1O2) and ·OH under light exposure. For PC, its photocatalytic activity depended mainly on the formation of 1O2 induced by the triplet of DOM (dissolved organic matter), but the lack of oxidative ·OH in its system leads to a lower degradation efficiency than that of HC. To prove the universal applicability of this rule for biochar materials, HC and PC materials obtained from soybean residue were also prepared for degrading BA. This work is devoted to an in-depth exploration of the catalytic activation mechanism of biochar obtained by different technological methods, and can create conditions for the generation of more dominant reactive oxygen species (ROS) on biochar, thus providing the guidance for environmental remediation.

The activation mechanism of peroxymonosulfate and peroxydisulfate by modified hydrochar: Based on the multiple active sites formed by N and Fe

Modified hydrochar (NHC@Fe), with multiple functional groups and transition metal oxide-containing surface, was successfully synthesized by one-step hydrothermal method. The differences in its catalytic activity for peroxymonosulfate (PMS) and peroxydisulfate (PDS) activation were studied in detail. Experimental and DFT studies showed that abundant active sites, namely, transition metals and functional groups on NHC@Fe provided multiple effective pathways for the activation of persulfate (PS). The NHC@Fe/PMS and NHC@Fe/PDS systems could degrade about 80% of tetracycline hydrochloride (TC) in 120 min and were found to be better than those modified by iron or nitrogen alone. This emphasized the advantage of N-Fe co-modification in persulfate activation. Although the Fe2+/Fe3+ cycle accelerated the activation, the activation of PMS mainly relied on Fe3+, whereas that of PDS mainly relied on Fe2+. Moreover, Fe-N, pyrrolic N, pyridine N, C-O, and O-CO groups also played a key role in the activation process, but the dominant action sites were not the same. Multiple free radicals, such as SO4•-, •OH, O2•-, and 1O2 were generated in PMS and PDS activation systems. 1O2 induced non-free radical pathway was mainly involved in the degradation of TC in both activation systems, but the generation pathway of 1O2 was more direct and rapid in the PDS system. This study provides detailed DFT models of the active sites activated by PMS and PDS and discusses the activation pathways of PMS and PDS along with the similarities and differences in ROS reaction mechanisms.

Photochemical behavior of dissolved organic matter derived from Alternanthera philoxeroides hydrochar: Insights from molecular transformation and photochemically reactive intermediates

Hydrochar-derived dissolved organic matter (HDOM) enters aquatic ecosystems through soil leaching and surface runoff following the application of hydrochar. However, the photochemical behavior of HDOM remains unclear. The photo-transformation of HDOM was analyzed by Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS), multiple spectroscopy methods, high-performance liquid chromatography, and combining synchronous fluorescence and Fourier-transform infrared spectroscopy with two-dimensional correlation spectroscopy. The results showed that with the increase of carbonization temperature, amide II in protein-like substances were observed to be preferentially photolyzed, and the protein-like substances were more sensitive to low irradiation time, while the duration time of the photochemical behavior of amide II and aliphatic C-H were more persistent. FT-ICR MS results showed that N and S-containing molecules, including lignins and lipids were more sensitive to ultraviolet irradiation. Furthermore, the photo-transformation of HDOMs was accompanied by the generation of triple excited state dissolved organic matter and singlet oxygen. Our findings will be beneficial for understanding the mechanisms of photo-transformation of HDOM and for predicting the possible behaviors of hydrochar produced at different temperatures before large-scale application.

Enhanced energy and nutrient recovery via hydrothermal carbonisation of sewage sludge: Effect of process parameters

Integration of waste management with energy and resource recovery is being widely explored to achieve sustainability. To achieve this, sewage sludge was treated with hydrothermal carbonisation (HTC) at temperatures ranging from 180 °C-260 °C with an increment of 20 °C for three different duration of 1 h, 3 h, and 5 h. The energy and resource recovery potential of the HTC treatment was evaluated through of hydrochar (HC) and process water (PW) properties. Dehydration and decarboxylation reactions resulted in reduced H/C and O/C atomic ratios of 1.35 and 0.45 respectively in HC-260-3, exhibiting peat-like propertied. The calorific value of HC-260-5 was enhanced to 5.9 MJ/kg (increase of 25.8 %) due to the combined effect of H/C and O/C atomic ratios, increased volatile organics and fixed carbon. A maximum energy recovery efficiency of 82.44 % was realised at 240 °C for 3 h rendering it the optimal process condition to ensure energy enrichment. Thermogravimetric analysis (TGA) of HC samples indicated an enhanced combustion behaviour with an increased HTC severity. The elevated levels of volatile fatty acids (VFAs) in PW (maximum 2296 mg/L) made it viable for energy recovery in anaerobic digestion units. Additionally, the PW contains significant concentrations of N and P (2091.68 mg/L and 40.51 mg/L, respectively), indicating enhanced resource/nutrient recovery potential.

Comparison of microalgal hydrochar and pyrochar: production, physicochemical properties, and environmental application

Microalgal biomass has been considered the third-generation biofuel production feedstock, but microalgae-derived biochar still needs to be thoroughly understood. This study aims to evaluate the production and physicochemical properties of microalgae-derived hydrochar produced by hydrothermal carbonization (HTC) process by comparison with pyrochar produced by dry thermal carbonization (DTC) process for environmental applications. Microalgal biochar was produced with commercially available Chlorella vulgaris microalgae using HTC and DTC processes under various temperature conditions. Pyrochar presented higher pH, ash contents, porosity, and surface area than hydrochar. Hydrochar gave more oxygen-containing functional groups on the surface and higher lead adsorption than pyrochar, making the microalgal hydrochar applicable in soil amendment and various environmental remediations. HTC could be an economically feasible thermochemical process for microalgal biochar production. It can produce hydrochar with high production yield from wet microalgae at low temperatures without a drying process.

Magnetic hydrochar grafted-chitosan for enhanced efficient adsorption of malachite green dye from aqueous solutions: Modeling, adsorption behavior, and mechanism analysis

Water pollution by organic dyes is one of the most serious environmental problems worldwide. Malachite green (MG) is considered as one the serious organic dyes which is discharged in wastewater by leather and textile manufacturing plants. MG dye can cause severe hazards to the environment and human health. Therefore, the removal of MG dye from wastewater is very important and essential. This study aims to synthesize a new magnetic hydrochar grafted to chitosan (MWSHC@CS) for the removal of MG dye from the aqueous solutions. Transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) surface area, and Zeta potential analysis were used to characterize the synthesized MWSHC@CS. Batch experiments were conducted to optimize MG dye adsorption conditions, including adsorbent mass, pH, temperature, initial concentration, and contact time. The results revealed that MWSHC@CS had an excellent removal efficiency (96.47 %) for MG dye at the optimum condition (at m: 20 mg, pH: 7.5, t: 420 min, and T: 298 K). Adsorption isotherms outcomes revealed the MG adsorption data were best fit by the Langmuir model with a maximum adsorption capacity (420.02 mg/g). Adsorption kinetics outcomes exhibited that the adsorption process of MG dye fitted well to the Elovich model. The thermodynamic results revealed that the adsorption process was physical, exothermic, and spontaneous. The adsorption mechanisms of MG onto MWSHC@CS were hydrogen bonding, electrostatic interaction, and π-π interactions. Furthermore, MWSHC@CS showed excellent reusability for the removal of MG over five cycles of adsorption-desorption (83.76 %). In conclusion, the study provides a new, low-cost, and effective magnetic nanocomposite based on chitosan as a promising adsorbent for the high-performance removal of MG dye from aqueous solutions.

Pyrolytic and hydrothermal carbonization affect the transformation of phosphorus fractions in the biochar and hydrochar derived from organic materials: A meta-analysis study

Carbonized organic materials are widely used to achieve soil improvement and alleviate soil pollution. The carbonization process significantly changes the total phosphorus (P) content and the P form in the solid phase derived from organic materials, which in turn has a significant impact on the P fertilizer effect in soils. In the present study, a meta-analysis with 278 observational data was conducted to detect the impact of the carbonization process (including pyrolytic carbonization and hydrothermal carbonization) on the transformation of P fractions in biochar or hydrochar derived from different organic materials. The results showed that the carbonization process significantly increased the total P content of the solid phase by 67.9%, and that the rate of P recovery from raw materials stayed high with a mean value of 86.8%. Among them, the impact of sludge-derived char was smaller when compared to the manure-derived char and biomass-derived char. The increase of total P in the biochar (or hydrochar) produced at >500 °C (or >200 °C) was more notable than that at <500 °C (or <200 °C). Simultaneously, the carbonization process significantly decreased the proportion of available P pool in the solid phase by 51.7% on average and increased the proportion of stable P pool in the solid phase by 204%. Appropriate production temperature helps to adjust the proportion of stable P pool in the solid phase. This meta-analysis pointed out that the carbonized solid phase recovers most of the P in the feedstock and that it promotes a significant transformation of available P pool in the feedstock to stable P in the carbonized solid phase. These findings provide useful information for the rational use of carbonization technology, the development of corresponding field management strategies, and the potential value of carbonized solid phase utilization.

MIL-53(Al)@HC nanohybrid for bicomponent adsorption of ibuprofen and metsulfuron-methyl: Application of macro- and microscopic models and competition between contaminants

In this work, a hybrid was synthesized by hydrothermal treatment, metal-organic framework functionalized with hydrochar (MIL-53(Al)@HC) for the adsorption of two organic molecules Ibuprofen sodium salt and Metsulfuron-methyl, in binary system. The hybrid is composed of 71 wt% biomass and 29 wt% MOF. TGA, BET, FTIR, XRD and XPS characterization techniques were used to verify the hybridization of MIL-53(Al)@HC. The MIL-53(Al)@HC hybrid showed in situ MIL-53(Al) crystal growth capability. Batch adsorption experiments were carried out to study the effect of pH, adsorbent dosage, adsorbate concentration, contact time and temperature effect. The results obtained under extreme conditions demonstrate that MIL-53(Al)@HC is an adsorbent capable of removing >98% of IBU and MTM in mixture at a concentration of 0.3 mM (68 ppm IBU and 115 ppm MTM). The pseudo-second order model adequately described the adsorption kinetics and equilibrium using the Sips and Freundlich models. The physico-statistical microscopic model (2-layer) corroborated the hypothesis of a multilayer adsorption proposed by the macroscopic Freundlich model. In the competition study between IBU and MTM, both antagonistic and synergistic effects were observed. In the thermodynamic study, positive values of (ΔH°) indicate that adsorption is endothermic in nature and that the dominant mechanism is physisorption. A mechanism of adsorption by hydrogen bridging and non-covalent π*-π adsorbate-adsorbate and adsorbate-adsorbate-adsorbate interactions was proposed. The desorption study shows that in 5 washing cycles MIL-53(Al)@HC is a recoverable material.

Recent advances in environmental and agricultural applications of hydrochars: A review

Hydrochar is a carbonaceous material that is generated through the process of hydrothermal carbonization (HTC) from biomass, which has garnered considerable attention in recent years owing to its potential applications in a diverse range of fields, such as environmental remediation and agriculture. Hydrochar is produced from a diverse range of biomass waste materials and retains exceptional properties, including high carbon content, stability, and surface area, making it an optimal candidate for various enviro-agricultural applications. Moreover, it delves into the production process of hydrochar, with explicit emphasis on the optimization of certain properties during the production of hydrochar from bio-waste. Furthermore, the potential of hydrochar as an adsorbent and catalyst support for heavy metals and dyes was extensively explored, along with a soil remediation potential that can improve the physical, chemical and biological properties of soil. This comprehensive review aims to provide a thorough overview of hydrochar with a particular focus on its production, properties, and prospective applications. The significance of hydrochar is accentuated and the growing need for alternative sources of energy and materials that are environmentally sustainable is highlighted in this paper. Besides, the consequence of hydrochar on soil properties such as water-holding capacity, nutrient retention, and total soil porosity, as well as its influence on soil chemical properties such as cation exchange capacity, electrical conductivity, and surface functionality is scrutinized.

Effects of chemical aging on carbonaceous materials: Stability of water-dispersible colloids and their influence on the aggregation of natural-soil colloid

Although hydrochar and biochar have been used as soil conditioners, there is not a clear understanding of how their properties changes due to aging impacts their colloidal particles behavior on the soil system. From this premise, we produced hydrochar and biochar from the same feedstock (cashew bagasse) and aged with different chemical methods: (i) using hydrogen peroxide, (ii) a mixture of nitric and sulfuric acids, and (iii) hot water. It was analyzed the effects of aging on the stability of the carbonaceous materials (CMs) colloids in aqueous medium with different ionic strength (single systems), as well as the stability of the natural-soil colloid when interacting with biochar and hydrochar colloids (binary systems). A chemical composition (C, H, N, and O content) change in CMs due to the chemically induced aging was observed along with minor structural modifications. Chemical aging could increase the amount of oxygen functional groups for both biochar and hydrochar, though in a different level depending on the methodology applied. In this sense, hydrochar was more susceptive to chemical oxidation than biochar. The effectiveness of chemical aging treatments for biochar increased in the order of water < acid < hydrogen peroxide, whereas for hydrochar the order was water < hydrogen peroxide < acid. While the increase in surface oxidation improved the biochar colloidal stability in water medium at different ionic strengths (single systems), the stability and critical coagulation concentration (CCC) slightly changed for hydrochar. Natural-soil clay (NSC) interactions with oxidized carbonaceous material colloids (binary systems) enhanced NSC stability, which is less likely to aggregate. Therefore, the aging of carbonaceous materials modifies the interaction and dynamics of soil small particles, requiring far more attention to the environmental risks due to their application over time.

Hydrochar-nanoparticle integration for arsenic removal from wastewater: Challenges, possible solutions, and future horizon

Arsenic (As) contamination poses a significant threat to human health, ecosystems, and agriculture, with levels ranging from 12 to 75% attributed to mine waste and stream sediments. This naturally element is abundant in Earth's crust and gets released into the environment through mining and rock processing, causing ≈363 million people to depend on As-contaminated groundwater. To combat this issue, introducing a sustainable hydrochar system has achieved a remarkable removal efficiency of over 92% for arsenic through adsorption. This comprehensive review presents an overview of As contamination in the environment, with a specific focus on its impact on drinking water and wastewater. It delves into the far-reaching effects of As on human health, ecosystems, aquatic systems, and agriculture, while also exploring the effectiveness of existing As treatment systems. Additionally, the study examines the potential of hydrochar as an efficient adsorbent for As removal from water/wastewater, along with other relevant adsorbents and biomass-based preparations of hydrochar. Notably, the fusion of hydrochar with nanoparticle-centric approaches presents a highly promising and environmentally friendly solution for achieving the removal of As from wastewater, exceeding >99% efficiency. This innovative approach holds immense potential for advancing the realms of green chemistry and environmental restoration. Various challenges associated with As contamination and treatment are highlighted, and proposed solutions are discussed. The review emphasizes the urgent need to advance treatment technologies, improve monitoring methods, and enhance regulatory frameworks. Looking outlook, the article underscores the importance of fostering research efforts, raising public awareness, and fostering interdisciplinary collaboration to address this critical environmental issue. Such efforts are vital for UN Sustainable Development Goals, especially clean water and sanitation (Goal 6) and climate action (Goal 13), crucial for global sustainability.

Elimination of hazardous Se(IV) through adsorption-coupled reduction by iron nanoparticles embedded on mesopores of chitin obtained from waste shrimp shells

Selenium is an essential nutrient for biological function. However, there is a detrimental effect on the aquatic environment associated with higher concentrations of > 40 µg/L. The utilization of waste shrimp shells for the removal of high-concentrated selenium from wastewater is a commendable strategy in both the pollution control and waste management sectors. In the present study, a chitin-iron polymer complex hybrid material (Fe@SHC) was prepared from shrimp shell-derived hydrochar (SHC), and the synthesized composite was successfully employed to uptake selenium from wastewater. The highest removal performance of 79.18 mg/g was attained by Fe@SHC, whereas the capacity of SHC was 15.30 mg/g. It was found that the calcium content of Fe@SHC (1.98%) was lower than that of SHC (25.20%) and pHzpc of Fe@SHC was extended to 7.78 compared with that of SHC (2.00). The abundance of protonated hydroxyl (-OH2+) and amine (-NH3+) functional groups that developed through the iron co-precipitations resulted in the improved adsorption performance of Fe@SHC. XPS analysis demonstrated that the captured Se(IV) species were converted into less hazardous Se(0), which is accompanied by the electron transfer with both N-C = O (acetyl amine) and -NH2 (amine) functional groups. Adsorption kinetics disclosed that the adsorption process was governed by chemical sorption, and the Sips isotherm model provided the most accurate description of the isotherm equilibrium. This study proposed an inexpensive and environmentally friendly method for effective decontamination of Se from wastewater.

Trithiocyanurate-functionalized hydrochar for effectively removing methylene blue and Pb (II) cationic pollutants

Functionalization can change the physicochemical properties of hydrochar and improve its ability to adsorb pollutants. Herein, a trithiocyanurate-functionalized hydrochar (TTHC) was obtained from acylation of chloroacetyl chloride and hydrochar and modification with trithiocyanuric acid in alkaline conditions. TTHC can efficiently remove cationic methylene blue (MB) and Pb(II) from wastewater. The removal can be expressed with pseudo-second-order kinetic and Langmuir models. The MB and Pb(II) removed uptakes by TTHC at 298 K exceeded 909.9 and 182.8 mg g-1 respectively, and the removal rates reached 90% and 98% within 120 min respectively. Characterizations show TTHC is functionalized with trithiocyanurate, and rich in thiolate and aromaticity, and tends to adsorb MB/Pb(II) via multiple adsorption mechanisms. After five sorption-desorption regeneration cycles, TTHC maintained 80% and 99% adsorption capacities for MB and Pb(II) respectively. Therefore, TTHC is a promising efficient sorbent for removing MB and Pb(II) from effluents.

Effect mechanism of iron conversion on adsorption performance of hydrochar derived from coking sludge

In this study, Fe conversion during hydrothermal carbonization (HTC) of coking sludge were investigated, and the effect mechanism of Fe component on the adsorption performance of coking sludge hydrochar (CHC) was explored. The results showed that after HTC treatment, more than 95 % of Fe remained in the CHC. Fe3+ was reduced to Fe2+ by sugar and amino acids. Fe was stabilized during the HTC process and was still predominantly in the Fe manganese oxidation state. The CHC prepared at 270 °C exhibited excellent adsorption capacities for Congo red (CR), tetracycline (TC), and Cr (VI). Their maximum adsorption capacities were 140.85, 147.06, and 19.92 mg/g, respectively. Quantitative adsorption mechanism experiments, XRD and VSM characterization revealed that Fe component played a significant role in adsorption, and CHC with more Fe3O4 exhibited better adsorption capacity. The results of the XPS characterization of CHC before and after adsorption showed that Fe3O4 provided rich Fe adsorption sites on the surface of CHC to strengthen the adsorption efficiency of pollutants through Fe3+/Fe2+ reduction and complexation of Fe-O/N. In addition, the formed Fe3O4 also imparted CHC with magnetic properties (Ms = 4.12 emu/g) to facilitate the subsequent separation and recovery. These results demonstrated that the prepared CHC has great potential for treating actual wastewater containing CR and TC.

The effect of an acid catalyst on the hydrothermal carbonization of sewage sludge

This research is focused on the addition of a catalyst, sulphuric acid (VI), to sewage sludge, and its effect on solid and liquid products resulting from the hydrothermal carbonization process. Consequently, for hydrochars, proximate and ultimate analyses, higher heating value and specific surface area were determined. Additionally, Fourier-transform infrared spectrophotometric and thermogravimetric analyses were conducted. The heavy metal contents in the ash composition of hydrochars were identified by X-ray fluorescence spectrometry. It was confirmed that the catalyst addition changed the structure as well as the physical and chemical properties of hydrochars and their ashes. Regarding post-processing water, both pH value and conductivity were determined and the element composition, including heavy metals, was conducted by the inductively coupled plasma optical emission and mass spectrometry analyses. It was found that the addition of the catalyst caused a decrease in heavy metal contents and an increase of phosphorus compound in filtrates.

Machine learning-based modeling of malachite green adsorption on hydrochar derived from hydrothermal fulvification of wheat straw

This study investigated the efficiency of hydrochar derived from hydrothermal fulvification of wheat straw in adsorbing malachite green (MG) dye. The characterizations of the hydrochar samples were determined using various analytical techniques like SEM, EDX, FTIR, X-ray spectroscopy, BET surface area analysis, ICP-OES for the determination of inorganic elements, elemental analysis through ultimate analysis, and HPLC for the content of sugars, organic acids, and aromatics. Adsorption experiments demonstrated that hydrochar exhibited superior removal efficiency compared to feedstock. The removal efficiency of 91 % was obtained when a hydrochar dosage of 2 g L-1 was used for 20 mg L-1 of dye concentration in a period of 90 min. The results showed that the study data followed the Freundlich isotherms as well as the pseudo-second order kinetic model. Moreover, the determined activation energy of 7.9 kJ mol-1 indicated that the MG adsorption was a physical and endothermic process that increased at elevated temperatures. The study also employed an artificial neural network (ANN), a machine learning approach that achieved remarkable R2 (0.98 and 0.99) for training and validation dataset, indicating high accuracy in simulating MG adsorption by hydrochar. The model's sensitivity analysis demonstrated that the adsorbent dosage exerted the most substantial influence on the adsorption process, with MG concentration, pH, and time following in decreasing order of impact.

Hydrothermal carbonization of Typha australis: Influence of stirring rate

According to existing literature, there are no conclusive results on the impact of stirring on hydrothermal carbonization (HTC); some studies report a significant impact on the product's properties, while others indicate no influence. This study investigates the influence of stirring rate on several responses and properties of HTC products, including solid mass yield, solid carbon fraction, surface area, surface functional groups, morphology, and the fate of inorganic elements during HTC. Waste biomass was introduced as a feedstock to a 2 L HTC reactor, where the effects of temperature (180-250 °C), residence time (4-12 h), biomass to water (B/W) ratio (1-10%), and stirring rate (0-130 rpm) were investigated. The findings of this study conclusively indicated that the stirring rate does not influence any of the studied responses or properties of hydrochar under the selected experimental conditions used in this study. Nevertheless, the results indicated that a low-stirring rate (5 RPM) is enough to slightly enhanced the heating-up phase of the HTC reactor. For future research, it is recommended to examine the impact of stirring rate on the HTC of other types of biomass using the methodology developed in this study.

Biochar promoted microbial iron reduction in competition with methanogenesis in anaerobic digestion

Microbial Fe (III) reduction generally could outcompete methanogenesis due to its thermodynamic advantage, while the low bioavailability of Fe (III) compounds limits this process in the anaerobic digestion system, which could result in the low recovery of vivianite. Therefore, this study investigated the competition between Fe (III) reduction and methanogenesis in the presence of different biochar (pyrochar and hydrochar). The results showed that pyrochar obtained at 500 °C (P5) resulted in the highest Fe (III) reduction (80.3%) compared to the control experiment (29.1%). P5 also decreased methane production by 9.4%. Both conductivity and surface oxygen-containing functional groups contributed to the promotion of direct electron transfer for Fe (III) reduction. Genomic-centric metatranscriptomics analysis showed that P5 led to the highest enrichment of Geobacter soli A19 and induced the significant expression of out membrane cytochrome c and pilA in Geobacter soli A19, which was related to higher Fe (III) reduction.

Seawater as supplemental moisture: The effect of Co-hydrothermal carbonization products obtained from chicken manure and cornstalk

The use of seawater as a substitute for pure water as supplemental moisture raises questions about its effect on the physicochemical properties of hydrochar. Therefore, this study aimed to investigate the feasibility of using seawater as supplemental moisture by comparing the physicochemical properties of products obtained through Co-hydrothermal carbonization of chicken manure and cornstalk under seawater and deionized water conditions. By varying the HTC temperature and blending ratios of CM and CS to investigate comprehensively the effect of seawater. Results indicated that the hydrochar yield experienced a variation from 54.54% to 57.40%, while the IC value changed from 7.69% to 8.46% as the ratio of CM:CS shifted from 3:1 to 1:3 under seawater conditions. The higher heating value of the hydrochars obtained under seawater conditions was lower than those obtained under deionized water conditions. This suggests that seawater conditions promote the hydrolysis reaction of organic solid waste. Furthermore, it was observed that when no lignin hydrolysis reaction occurred, seawater conditions had no discernible effect on the fuel quality of the hydrochar. However, at an HTC temperature of 250 °C, the fuel quality of the hydrochar obtained under seawater conditions was notably inferior to that of the hydrochar obtained under deionized water. Thus, an HTC temperature lower than 250 °C is necessary for the hydrothermal carbonization of organic solid waste under seawater conditions. Moreover, the relative content of surface -C-(C, H)/CC of the hydrochar obtained under seawater conditions was lower than that obtained under deionized water conditions, indicating that the hydrochar had a low degree of aromatization. Additionally, there was a significant increase in the immobilized Mg atoms in the hydrochar under seawater conditions, which affected the hydrochar yield and higher heating value of the hydrochar. This research presents a theoretical foundation for preparing solid fuels and materials using hydrothermal carbonization of saltwater as supplemental moisture.

Nitrogen-rich carbon composite fabricated from waste shrimp shells for highly efficient oxo-vanadate adsorption-coupled reduction

Protein, calcium carbonate, and chitin are abundant in shrimp shells. In this study, chemical treatment followed by hydrothermal carbonization was used to synthesize the nitrogen-rich hydrochar (HSHC) from shrimp shells. The untreated hydrochar exhibited a higher amount of calcium (25.37%) and less amount of nitrogen (2.68%) with alkaline pH (9.1). Interestingly chemical pre-treatment on shrimp shells boosted the nitrogen content to 6.81% and eliminated the calcium while controlling the pH to 6.4, which was beneficial for oxo-vanadate removal. The HSHC achieved vanadium(V) adsorption capacity of 21.20 mg/g at an optimal solution pH of 3.0, whereas the pristine hydrochar performed poorly (0.66 mg/g). The abundance of oxygen and nitrogen-based functional groups that developed through the chemical treatment resulted in improved adsorption coupled reduction performance of HSHC. This study proposed an inexpensive and environmentally friendly method for converting waste shrimp shells into value-added adsorbent.

The integrated production of hydrochar and methane from lignocellulosic fermentative residue coupling hydrothermal carbonization with anaerobic digestion

The popularization of large-scale biogas project makes the disposal of fermentative residue an urgent issue to be solved. Hydrothermal carbonization (HTC) technology is suitable for treating wet biomass to produce carbonaceous materials. In this study, the solid residue from the two-phase anaerobic digestion (AD) was hydrothermally converted in the range of 180-240 °C, and the hydrochar and aqueous components were characterized for subsequent utilization. The heating values of hydrochar were indicated to be increased by 14.2% and 16.6% at 210 °C and 240 °C as compared with feedstock, and also the specific surface areas were 34.8 m2/g and 27.1 m2/g with 17.4- and 13.3-fold enhancement, respectively. The migration of elements such as S, Cl, K to aqueous phase was beneficial for fuel application. The mesoporous pores were dominant in hydrochars with ample oxygenated functional groups. In addition, the wastewater involved organic acids, phenols, and nitrogen-containing compounds, etc. Evaluating the biodegradability by AD, it was found that when the initial concentration was ≤8 g COD/L, the maximum methane yields up to 275.9 mL CH4/g CODremoval and 277.6 mL CH4/g CODremoval were obtained. The enhanced toxicity/inhibition of representative pollutants on microorganisms was significant at higher organic loading, which could be indicated in the microbial structure and diversity. As a conclusion, the integrated production of hydrochar and methane will provide an extended route for further processing of lignocellulosic fermentative residue.

Hydrothermal carbonization of milk/dairy processing sludge: Fate of plant nutrients

Dairy processing sludge (DPS) is a byproduct generated in wastewater treatment plants located in dairy (milk) processing companies (waste activated sludge). DPS presents challenges in terms of its management (as biosolids) due to its high moisture content, prolonged storage required, uncontrolled nutrient loss and accumulation of certain substances in soil in the proximity of dairy companies. This study investigates the potential of hydrothermal carbonization (HTC) for recovery of nutrients in the form of solid hydrochar (biochar) produced from DPS originating from four different dairy processing companies. The HTC tests were carried out at 160 °C, 180 °C, 200 °C and 220 °C, and a residence time of 1h. The elemental properties of hydrochars (biochars), the content of primary and secondary nutrients, as well as contaminants were examined. The transformation of phosphorus in DPS during HTC was investigated. The fraction of plant available phosphorus was determined. The properties of hydrochar (biochar) were compared against the European Union Fertilizing Products Regulation. The findings of this study demonstrate that the content of nutrient in hydrochars (biochars) meet the requirements for organo-mineral fertilizer with nitrogen and phosphorus as the declared nutrients (13.9-26.7%). Further research on plant growth and field tests are needed to fully assess the agronomic potential of HTC hydrochar (biochar).

Valorization of loquat seeds by hydrothermal carbonization for the production of hydrochars and aqueous phases as added-value products

In the framework of circular bio-economy, waste loquat seeds were utilized for the production of two added-value products. The seeds were hydrothermally carbonized at a temperature range of 150-250 °C and time range 2-6 h and the resultant hydrochars and aqueous phases were characterized using various methods. The optimum higher heating value of 30.64 MJ kg-1, ash content of 1.99 wt % and alkali index of 0.05 were achieved for the hydrochar prepared at 250 °C and 6 h, establishing its suitability for energy-related applications. The aqueous phase obtained at 250 °C and 6 h achieved 90% scavenging of the 2,2-diphenyl-1-picryl-hydrazyl-hydrate (DPPH) radical and had a IC50 value of 43.71 μg mL-1. Principal component analysis showed that the production of phenols, ketones, alkenes and organic acids was favored at >200 °C, whereas furans and aldehydes were primarily formed at 150 °C. Conclusively, both added-value products were obtained at the same optimum hydrothermal carbonization conditions of 250 °C and 6 h treatment time. In a bio-refinery context, this has the practical implication that both bio-products be obtained simultaneously, without the need to switch between different temperatures and residence times.

Hydrochar reduces oxytetracycline in soil and Chinese cabbage by altering soil properties, shifting microbial community structure and promoting microbial metabolism

The efficient remediation of antibiotic-contaminated soil is critical for agroecosystem and human health. Using the cost-effective and feedstock-independent hydrochar with rich oxygen-containing functional groups as a soil remediation material has become a hot concern nowadays. However, the feasibility and effectiveness of hydrochar amendment in antibiotic-contaminated soil still remain unknown. Therefore, this study investigated the remediation effect and potential mechanisms of different hydrochars from cow manure (H-CM), corn stalk (H-CS) and Myriophyllum aquaticum (H-MA) at two levels (0.5% and 1.0%) in oxytetracycline (OTC)-contaminated soil using a pot experiment. Results showed that compared with CK, OTC content in the soils amended with H-CM and H-MA was decreased by 14.02-15.43% and 9.23-24.98%, respectively, whereas it was increased by 37.03-42.64% in the soils amended with H-CS. Additionally, all hydrochar amendments effectively reduced the OTC uptake in root and shoot of Chinese cabbage by 10.41-57.99% and 31.92-65.99%, respectively. The response of soil microbial community to hydrochar amendment heavily depended on feedstock type rather than hydrochar level. The soil microbial metabolism (e.g., carbohydrate metabolism, amino acid metabolism) was enhanced by hydrochar amendment. The redundancy analysis suggested that TCA cycle was positively related to the abundances of OTC-degrading bacteria (Proteobacteria, Arthrobacter and Sphingomonas) in all hydrochar-amended soils. The hydrochar amendment accelerated the soil OTC removal and reduced plant uptake in soil-Chinese cabbage system by altering soil properties, enhancing OTC-degrading bacteria and promoting microbial metabolism. These findings demonstrated that the cost-effective and sustainable hydrochar was a promising remediation material for antibiotic-contaminated soil.

Surface acidic sites strengthened core-shell HC@MnO2 for enhanced gaseous ammonia adsorption

As a common gaseous pollutant in atmospheric environment, ammonia (NH3) not only contributes to the formation of haze, but also disturb the nitrogen balance in ecosystem through atmospheric nitrogen deposition. Therefore, the control of NH3 emission has important environmental significance. Adsorption is the most commonly used technology for NH3 purification in practice, and efficient adsorbents are the key to adsorption method. Herein, a core-shell structured HC@MnO2 adsorbent was constructed by in-situ growth of layered δ-MnO2 on hydrochar (HC) surface, and its surface acidic sites were further strengthened. The enhancement of surface acidic sites significantly improved the adsorption performance of HC@MnO2 for NH3, reaching 34.49 mg NH3/g, which was superior to commercial carbon-based materials (whose adsorption capacity was 8.47 times that of Coal-based activated carbon, 14.25 times that of Coconut shell activated carbon, and 12.77 times that of Bamboo charcoal). Moreover, the operating parameters and adsorption kinetics were detailly investigated. The adsorption of HC@MnO2 on NH3 was in accordance with pseudo-second-order adsorption kinetics model. Large surface area of core-shell structure and abundant surface acidic sites of δ-MnO2 are the decisive reasons for the excellent adsorption performance of HC@MnO2. Importantly, the enhancement of surface stronger Brønsted acidic sites is the key to improve NH3 adsorption performance of HC@MnO2. Finally, the thermal regeneration and recycling performance of HC@MnO2-H were also investigated. This study provides a suggestive for further research on low-cost composite materials with excellent NH3 adsorption performance.

Hydrothermal carbonization (HTC) of dairy waste: effect of temperature and initial acidity on the composition and quality of solid and liquid products

Background: Hydrothermal carbonization (HTC) of dairy processing waste was performed to investigate the effect of temperature and initial pH on the yield and composition of the solid (hydrochar) and liquor produced. All hydrochars met the EU requirements of organo-mineral solid fertilizers defined in the Fertilizing Products Regulation in terms of phosphorus (P) and mineral content. Methods: Laboratory scale HTC was performed using pressurized reactors, and the products (solid and liquid) were collected, stored and analyzed for elemental composition and nutrient content using Inductively coupled plasma optical emission spectroscopy (ICP-OES), ultraviolet-visible spectrophotometry (UV-Vis) and other analytic techniques. Results: Maximum hydrochar yield (60.67%) was observed at T=180℃ and pH=2.25, whereas the maximum P-recovery was 80.38% at T=220℃ and pH=4.6. The heavy metal content of the hydrochars was mostly compliant with EU limitations, except for Ni at T=220℃ and pH=8.32. Meanwhile, further study of Chromium (Cr) species is essential to assess the fertilizer quality of the hydrochars. For the liquid product, the increase in temperature beyond 200℃, coupled with an increase in initial acidity (pH=2.25) drove P into the liquor. Simultaneously, increasing HTC temperature and acidity increased the concentration of NO 3 - and NH 4 + in the liquid products to a maximum of 278 and 148 mg/L, respectively, at T=180℃ and pH=4.6. Furthermore, no direct relation between final pH of liquor and NH 4 + concentration was observed. Conclusions: HTC allows for the production of hydrochar as a potential fertilizer material that requires further processing. Adjusting HTC conditions enhanced P-recovery in the hydrochar, while retrieving higher nitrate concentrations in the liquid product. Optimizing HTC for the production of qualified hydrochars requires further treatment of Cr content, studying the availability of P in the products and enhancing the hydrochar yield for economic feasibility.

Effects of different modifying agents on the preparation and properties of coagulants derived from excess sludge

The contents and kinds of oxygen-containing functional groups are very significant when preparing cationic hydrochar coagulants via graft copolymerization. Herein, the hydrothermal conditions to produce sludge-based hydrochar (SBC) precursors were optimized by introducing different kinds and amounts of modifying agents (i.e., HCOOH, citric acid (CA), H2SO4, and H2O2), then the surface properties and flocculation performance of derived cationic coagulants (SBC-g-DMC) were studied. Results showed that the utilization of four modifiers raised the acidic groups on the SBC surface; thereinto, the presence of CA could evidently increase the content of phenolic hydroxyl groups. After DMC monomer grafting, the formed coagulants possess positive zeta potentials over a wide pH range (i.e., 3.0 ~ 11.0), showing a typical cationic property. The grafting ratio and efficiency, as well as the cationic degree of coagulants prepared with different SBC precursors follow a descending order of SBCCA-g-DMC > [Formula: see text]-g-DMC > SBCHCOOH-g-DMC > [Formula: see text]-g-DMC; thus, SBCCA-g-DMC coagulant with the best grafting result shows a superior flocculation performance. When a dosage of 4 mg/L was adopted, the average turbidity removal rate of SBCCA-g-DMC could reach up to 94.44%. Meanwhile, due to the possible and robust oxidation with the initiator, H2O2 seems not a perfect modifier for SBC preparation. This study could provide an essential reference for the optimal synthesis of SBC and its based coagulants for organic matter recovery and pollutant removal.

Phosphorus recycling from waste activated sludge using the hydrothermal platform: Recovery, solubility and phytoavailability

To address the grand challenge of increasing the sustainability of wastewater treatment plants, hydrothermal carbonization was studied as a nutrient recovery platform, transforming sludge into a valuable hydrochar. Carbonization was achieved at different temperatures (200-300 °C) and durations (30-120 min). The highest mass recovery (73%) was observed in the lowest temperature, while the lowest (49%) was obsereved at the highest temperature. Under all reaction conditions, phosphorus recovery values exceeded 80%, with the dominated fraction of inorganic-P in the hydrochar being HCl-extractable. Although HCl-extractable P is considered a moderately labile P fraction, P phytoavailability assays indicate that sewage sludge hydrochar is an excellent source for P, surpassing soluble P, likely due to its slow-release nature. We postulate that polyphosphates constitute a significant portion of this P pool. Overall, we emphasize the benefits of using HTC as a circular economy approach to convert sludge into a valuable hydrochar.