What do patients expect from complete dentures?

OBJECTIVES

An investigation was undertaken with the aim of determining whether patients wearing complete dentures in dental hospital (DH) and dental practice (DP) had different expectations from their dentures, together with their requirements for information about denture construction and oral and denture care.

METHODS

A total of 214 edentulous patients, with a mean age of 69 years, from DP (125) and DH (89) participated in the questionnaire-based study. A valid questionnaire (P-DEQ) was constructed which demonstrated good test-retest reliability (Cronbach's alpha 0.86). The P-DEQ sought to determine how patients responded to a series of questions related to what dentists are urged to achieve with complete dentures. The questions covered not only what might be termed "normative" expectations but also patients' perceived needs for further information about the stages of prosthodontic treatment and oral or denture care.

RESULTS

Significant differences (p< or =0.001) emerged between the two groups; 82% of the DH group thought it essential that their dentures caused no pain compared with 59% of the DP group; for "absence of slackness" (DH 87%; DP 65%), and "good bite" (DH 82%; DP 55%). No significant differences emerged for the other parameters investigated, but both groups had high expectations for ease of chewing, speech, and good appearance. Differences (p<0.05) between the groups also emerged with respect to the demand for more information regarding the stages involved in denture construction (DH 57%, DP 76%) and how to care for dentures (DH 75%, DP 89%). Large proportions of patients from both groups would prefer to have more information about the selection of teeth (71% DH, 72% DP), and how to care for their mouths (84% DH, 86% DP), but there were no differences between the groups in these parameters.

CONCLUSIONS

Most patient expectations appear to equate with the normative view expressed in standard prosthodontic texts. However, expectations may differ not only between individuals but also between patient groups managed in teaching hospital and DP settings. Edentulous patients also need information regarding the stages involved in denture construction and how to care for their mouths and dentures. This may have implications for the management of edentulous patients in DP and dental hospital.

The Effect of Chewing Urea-Containing Gum on Plaque Acidogenic and Alkaligenic Parameters

The aim of this double-blind crossover study was to determine the effect of chewing urea-containing gum on selected microbiological plaque properties. Eleven subjects chewed either urea-containing or urea-free placebo gum 3 times daily, each for 4 weeks, with at least a 4-week separation between regimes. After each chewing regime, plaque was sampled from all available surfaces, and inoculated into media indicative of acid or base production. In addition, interdental pH measurements were taken using touch Beetrode electrodes following sucrose and sorbitol mouthrinses, and sucrose mouthrinses followed by urea rinse, urea gum, or placebo gum. No significant differences in plaque acidogenic and alkaligenic properties were found between the urea and placebo gum regimes. Urea rinsing, urea gum and placebo gum all reduced the depth and duration of the pH fall following a sucrose mouthrinse. They also enhanced a rise in pH above the resting pH, but although urea gum produced a larger increase than placebo gum, the difference was not significant.

An appraisal of the quality of referral letters from general dental practitioners to a temporomandibular disorder clinic

AIM

To assess the usefulness of referral letters from general dental practitioners (GDPs) to a clinic seeing referrals related to temporomandibular disorders.

DESIGN

A retrospective analysis of all referral letters received by the TMD clinic at Manchester Dental Hospital over a ten-week period.

METHODS

The new patient referral letters to the TMD clinic were examined against suggested criteria of 16 points of information considered to be useful by clinicians working in the clinic. The letters were then assessed using a quality scale based on the level of useful information given in the letter, and using this scale, classified into groups of 'very helpful', 'some help' or 'a little helpful'.

RESULTS

Out of the 100 letters analysed, the majority (94) proved to be a 'little helpful' for the TMD clinician; that is to say, the letter included only 0-4 points (out of 16) regarded as important information for the specialist. The maximum number of points of information contained in a letter was nine. No letters were categorised as 'very helpful' for the clinician, and only 6% of the referral letters were considered to provide some help (5-12 points).

CONCLUSIONS

During the period of the study, in general, referral letters to the TMD clinic concerned contained insufficient information. The introduction of a referral pro forma, produced by the TMD clinic, and guidelines might improve the quality of referrals.

Detection of in vitro demineralization adjacent to restorations using quantitative light induced fluorescence (QLF)

AIM

Quantitative light-induced fluorescence (QLF) is a technique for the detection, quantification, and longitudinal monitoring of early carious lesions. The technique is non-destructive and can be used in vivo. Using the natural fluorescence of teeth, and the loss of such fluorescence in demineralized enamel, QLF is a repeatable and valid optical caries monitor. Previously used in smooth and occlusal surfaces, the purpose of this pilot study was to determine if QLF could detect, and longitudinally monitor, demineralization adjacent to a range of restorative materials.

METHODS

Fifteen previously extracted lower third molars were selected based upon the lack of any visible demineralization. A single burr hole was placed on the buccal surface and the cavity restored with amalgam, composite, compomer, glass ionomer or a temporary filling material. The buccal surface was then coated in an acid resistant nail varnish leaving an exposed area around the restoration and also a similar sized control region. The teeth had QLF images taken at baseline and were then subjected to a demineralizing buffer, further QLF images were subsequently taken at 72 and 144 h. Transverse microradiography was used to confirm the presence of early, subsurface lesions at the completion of the cycle (144 h). QLF images were analyzed by a single blinded examiner and values for change in radiance fluorescence were computed. These values were recorded as loss of radiance fluorescence loss integrated over area of lesion and expressed as DeltaQ.

RESULTS

The appearance of each material under QLF and the change in fluorescence is described. Amalgam, glass ionomer and the temporary material all exhibited reduced fluorescence, while composite and compomer showed increased fluorescence, when compared with surrounding enamel. There was no change in fluorescence of the materials when subjected to experimental demineralizing conditions. Readings at 72 and 144 h demonstrated demineralization adjacent to the restorations and at the exposed control. Significant differences were detected between baseline, 72 and 144 h using ANOVA on all restorations with the exception of compomer where significance was noted between baseline and 144 h, p>0.05.

CONCLUSIONS

This pilot study has demonstrated the ability for QLF to detect and monitor secondary caries. Analysis techniques should be based upon the subtraction of baseline DeltaQ scores from subsequent images. Further research is required to assess the ability of QLF to detect secondary lesions in vivo.

Surgical adverse events, risk management, and malpractice outcome: morbidity and mortality review is not enough

OBJECTIVE

To review all admissions (age > 13) to three surgical patient care centers at a single academic medical center between January 1, 1995, and December 6, 1999, for significant surgical adverse events.

SUMMARY BACKGROUND DATA

Little data exist on the interrelationships between surgical adverse events, risk management, malpractice claims, and resulting indemnity payments to plaintiffs. The authors hypothesized that examination of this process would identify performance improvement opportunities overlooked by standard medical peer review; the risk of litigation would be constant across the three homogeneous patient care centers; and the risk management process would exceed the performance improvement process.

METHODS

Data collected included patient demographics (age, gender, and employment status), hospital financials (hospital charges, costs, and financial class), and outcome. Outcome categories were medical (disability: <1 month, 1-6 months, permanent/death), legal (no legal action, settlement, summary judgment), financial (indemnity payments, legal fees, write-offs), and cause and effect analysis. Cause and effect analysis attempts to identify system failures contributing to adverse outcomes. This was determined by two independent analysts using the 17 Harvard criteria and subdividing these into subsystem causative factors.

RESULTS

The study group consisted of 130 patients with surgical adverse events resulting in total liabilities of $8.2 million US dollars. The incidence of adverse events per 1,000 admissions across the three patient care centers was similar, but indemnity payments per 1,000 admissions varied (cardiothoracic = $30 US dollars, women's health = $90 US dollars, trauma = $520 US dollars). Patient demographics were not predictive of high-risk subgroups for adverse events or litigation. In terms of medical outcome, 51 patients had permanent disability or death, accounting for 98% of the indemnity payments. In terms of legal outcome, 103 patients received no indemnity payments, 15 patients received indemnity payments, four suits remain open, and in eight cases charges were written off ($0.121 million US dollars). To date, no cases have been adjudicated in court. Cause and effect analysis identified 390 system failures contributing to the adverse events (mean 3.0 failures per adverse event); there were 4.7 failures per adverse event in the 15 indemnity cases. Five categories of causes accounted for 75% of the failures (patient management, n = 104; communication, n = 89; administration, n = 33; documentation, n = 32; behavior, n = 23). The current medical review process would have identified 104 of 390 systems failures (37%).

CONCLUSIONS

This study demonstrates no rational link between the tort system and the reduction of adverse events. Sixty-three percent of contributing causes to adverse events were undetected by current medical review processes. Adverse events occur at the interface between different systems or disciplines and result from multiple failures. Indemnity costs per hospital day vary dramatically by patient care center (range $3.60-97.60 US dollars a day). The regionalization of healthcare is in jeopardy from the burden of high indemnity payments.

Survey of infection control training program graduates: long-term care facility and small hospital practitioners

Graduates of a 2-day basic training course in infection control were surveyed. Respondents were generally from Midwestern long-term care facilities and small hospitals. These infection control practitioners had multiple roles in addition to infection control, most notably employee health and quality assurance. Infection control practitioners demonstrated significant job stability. The vast majority of institutions where survey respondents were employed followed recommended infection control practices.

The intra- and inter-examiner reliability of quantitative light-induced fluorescence (QLF) analyses

OBJECTIVE

To assess the reliability of the analysis stage of quantitative light-induced fluorescence (QLF). The QLF analysis involves subjective input from the user and this study examines the influence of this on the reproducibility of the QLF data.

METHOD

QLF images were taken of 20 human molar teeth that had been previously subjected to a demineralizing solution (phosphoric acid 37%) to create artificial white spot lesions on their buccal surfaces. Following examination of the images, 16 were chosen to represent a range of lesion size and severity. Three copies were made of the images and each was allocated a different filename. 10 examiners in three centres were asked to analyse each of the 16 images on three occasions, with at least seven days between each attempt. Simple instructions describing the analysis procedure were supplied and examiners were asked to adhere to these directions. Examiners were asked to rate each of the 16 teeth on their first attempt both quantitatively (5 point scale) and qualitatively in terms of difficulty of analysis. Data reported were the delta Q at 5% threshold for each tooth on each of three attempts.

RESULTS

Using ANOVA and paired t-tests to detect statistical differences, the three attempts of each examiner were used to determine intra-examiner reliability. Only one examiner (a novice at the technique) demonstrated differences between all three attempts and two demonstrated difference between one attempt. When the mean scores were compared to determine the inter-examiner reliability, only one examiner's results were statistically different when compared with two others.

CONCLUSION

This study has demonstrated that the analysis stage of QLF is reliable between examiners and within multiple attempts by the same examiner, when analysing in vitro lesions. Novices at the technique should be trained before analysing experimental data.

The use of quantitative light-induced fluorescence (QLF) to identify composite restorations in forensic examinations

There has been a large increase in the number of tooth colored restorations "white fillings" placed in recent years. An increased demand from the public for more aesthetic dental restorations causes a potential problem for forensic dentists who may find the fillings difficult to identify and hence include in postmortem odontograms. This has implications for the accuracy of dental identifications, particularly in situations where limited time is available for postmortem identification, e.g., mass casualty incidents. A new method for the detection of composite restorations is presented. Quantitative Light-induced Fluorescence (QLF) is a technique currently employed to detect small changes in enamel mineral content. An experiment was conducted to determine if the technique would afford a greater degree of contrast between composite and enamel and thus enable the accuracy of composite identification in enamel. Twenty-four previously extracted human premolars were gently cleaned with pumice and wet-and-dry paper. Twelve were subsequently randomly selected and restored on their buccal surfaces with Spectrum (a composite) following manufacturer's instructions. No attempt was made to color match the teeth and all were filled with shade B3. Twelve teeth were left unrestored. QLF and normal white light images were taken of both restored and non-restored surfaces with teeth wet and then dried. Ten forensic dentists were asked on two separate occasions (one month between each attempt) to indicate whether or not they thought the surface was: a) restored or b) unrestored. Results indicate that forensic dentists detected a significantly higher proportion (p<0.005) of filled surfaces with QLF.

Oral stereognostic ability in edentulous and dentate individuals

Oral stereognosis was analysed in a group of edentulous individuals who had been rehabilitated with conventional complete dentures and in a group of dentate subjects. The results showed that significant differences existed between the dentate and the edentulous individuals in shape recognition. Dentate individuals correctly identified test forms more often, and in a shorter time, when compared with individuals who had no natural teeth. These findings may have implications for oral sensory perception in edentulous individuals, which, in turn, might influence their ability to wear complete dentures.

Bioterrorism preparedness: a survey of Nebraska health care institutions

In March 2001, a 6-question survey was mailed to all hospitals and long-term care facilities in Nebraska to assess preparedness for bioterrorism. Only half of the respondents at that time believed that bioterrorism was something their community was likely to experience. We found that most facilities (98%) believed that they were unprepared for a bioterrorism event, and many did not know whom to contact in the event of such an emergency. We concluded from the results of the survey that the greatest needs to facilitate preparation were policies and procedures, identification of contacts, medications, protective equipment, laboratory support, and communication.

Good occlusal practice in simple restorative dentistry

Many theories and philosophies of occlusion have been developed. 1-12 The difficulty in scientifically validating the various approaches to providing an occlusion is that an 'occlusion' can only be judged against the reaction it may or may not produce in a tissue system (eg dental, alveolar, periodontal or articulatory). Because of this, the various theories and philosophies are essentially untested and so lack the scientific validity necessary to make them 'rules'. Often authors will present their own firmly held opinions as 'rules'. This does not mean that these approaches are to be ignored; they are, after all, the distillation of the clinical experience of many different operators over many years. But they are empirical. In developing these guidelines the authors have unashamedly drawn on this body of perceived wisdom, but we would also like to involve and challenge the reader by asking basic questions, and by applying a common sense approach to a subject that can be submerged under a sea of dictate and dogma.

Time-division multiplexing of large serial fiber-optic Bragg grating sensor arrays

Time-division multiplexing is a promising method for the interrogation of fiber-optic Bragg grating sensors arrays for measurement of strain and temperature. We examine the performance of these systems to determine the parameters for high-sensitivity, low-cross-talk operation. It is shown that the performance can be greatly improved by use of a short time resolution in the demultiplexing process. We propose a new method of demultiplexing with an electro-optic modulator to read out the sensor pulses by gating the signal with 400-ps resolution. The system is demonstrated experimentally to provide 0.15-microepsilon/square root(Hz) strain resolution in a 50-Hz bandwidth within a full-scale range of 8000 microepsilon. The system parameters are capable of handling at least 50 time-addressed sensors on a single fiber.

A cost analysis of encapsulated spray-dried milk fat

Anhydrous butter oil or cream was encapsulated in all-purpose flour, modified cornstarch, or sucrose and then spray-dried. We estimated the processing cost for a plant designed to produce 57,000 kg/d (125,000 lbs/ d) of encapsulated milk fat powder. Powder with a 50% milk fat content could be produced for about $0.23/kg plus the cost of the butter oil or cream, the encapsulant selected, and the other ingredients. Spray-drying of milk fat improved ease of handling and reduced storage costs.

Association models for a multivariate binary response

Models for a multivariate binary response are parameterized by univariate marginal probabilities and dependence ratios of all orders. The w-order dependence ratio is the joint success probability of w binary responses divided by the joint success probability assuming independence. This parameterization supports likelihood-based inference for both regression parameters, relating marginal probabilities to explanatory variables, and association model parameters, relating dependence ratios to simple and meaningful mechanisms. Five types of association models are proposed, where responses are (1) independent given a necessary factor for the possibility of a success, (2) independent given a latent binary factor, (3) independent given a latent beta distributed variable, (4) follow a Markov chain, and (5) follow one of two first-order Markov chains depending on the realization of a binary latent factor. These models are illustrated by reanalyzing three data sets, foremost a set of binary time series on auranofin therapy against arthritis. Likelihood-based approaches are contrasted with approaches based on generalized estimating equations. Association models specified by dependence ratios are contrasted with other models for a multivariate binary response that are specified by odds ratios or correlation coefficients.

Antimicrobial use in long-term-care facilities. SHEA Long-Term-Care Committee

There is intense antimicrobial use in long-term-care facilities (LTCFs), and studies repeatedly document that much of this use is inappropriate. The current crisis in antimicrobial resistance, which encompasses the LTCF, heightens concerns of antimicrobial use. Attempts to improve antimicrobial use in the LTCF are complicated by characteristics of the patient population, limited availability of diagnostic tests, and the virtual absence of relevant clinical trials. This position paper recommends approaches to management of common infections in LTCF patients and proposes minimal standards for an antimicrobial review program. In developing these recommendations, the position paper acknowledges the unique aspects of provision of care in the LTCF.

Case report: restorative maintenance of prostheses stabilised by non-endosseous implants

For over a century, dentists have looked to dental implants to enhance the stability of dental prostheses. During this time, many approaches and different materials have been used. The purpose of this article is to report on two cases where non-endosseous implant systems were used and to outline how the replacement prostheses were customiZed to comply with the different implant types. Intramucosal inserts and sub-periosteal implants are briefly reviewed in the context of current prosthodontic practise. There are still a small number of patients with clinically acceptable intramucosal and subperiosteal implant retained prostheses, which will continue to need servicing and replacement.

Refining the mouse chromosomal location of Cdm, the major gene associated with susceptibility to cadmium-induced testicular necrosis

Cadmium (Cd++) is a widespread environmental pollutant and classifed as an IARC 'Category I' human carcinogen. Cd++ can also cause severe renal toxicity and may be involved clinically in cardiovascular disease and osteoporosis. Genetic differences in sensitivity to cadmium toxicity have been noted in humans, whereas, among inbred mouse strains, unequivocal genetic data exist. Resistance to cadmium-induced testicular damage was reported in 1973 to be associated with a single major recessive gene, named Cdm, which has now been localized to mouse chromosome (Chr) 3. Using polymorphic microsatellite markers and semiquantitative histological parameters, we have corroborated the original 1973 data concerning mendelian inheritance and have further refined the region containing the Cdm gene from more than 24 cM to 0.64 cM (estimated 40-80 genes). We phenotyped 26 recombinant inbred lines generated from C57BL/6J (B6, resistant) and DBA/2J (D2, sensitive) inbred mice, and determined that the Cdm gene maps between microsatellite markers D3Mit110 and D3Mit255. Although toxicity to numerous heavy metals is well known, virtually no molecular mechanisms have yet been uncovered either in humans or laboratory animals. Identification and characterization of the mouse Cdm gene should enhance our understanding of heavy metal toxicity by identifying and characterizing, for the first time, a major mammalian gene responsible for susceptibility to diseases caused by heavy metal toxicity.

Microbiologic survey of long-term care facilities

BACKGROUND

We undertook a microbiologic survey of long-term care facilities to categorize bacteria found in cultures of residents. Culture and sensitivity data were collected on 566 samples from indwelling bladder catheters, percutaneous gastrostomy tubes, nares, stool, wounds, pressure ulcers, and tracheostomies in 25 Nebraska and Iowa facilities. Information was also collected on resident factors (eg, presence of indwelling urinary catheter, prior antibiotic administration) and institutional variables (eg, number of beds, nosocomial infection rates).

RESULTS

There were 478 gram-negative isolates, the leading organisms being Pseudomonas aeruginosa, Proteus mirabilis, Escherichia coli, and Klebsiella pneumoniae. There were 221 gram-positive isolates, the most frequently seen of which were enterococci and Staphylococcus aureus. Of the 442 residents sampled in the study, 168 (38%) were taking, or had within the previous month been taking, a systemic antibiotic. Quinolones were the most frequently prescribed antibiotic class. The institutional prevalence of urinary catheterization averaged 6.7%.

CONCLUSIONS

Significant antibiotic pressure exists in long-term care facilities, a fact that is reflected in antibiotic resistance patterns. A variety of gram-positive and gram-negative bacteria were found in nursing home culture specimens.

A novel technique to measure laser beam spot sizes

In this letter we report a novel technique to measure small laser beam spot sizes. We use the open aperture z-scan technique as a tool to measure the laser beam spot size. This technique measures small spot sizes with accuracy better than 10%.

The design and use of special trays in prosthodontics: guidelines to improve clinical effectiveness

This paper looks at how carefully prescribed special trays can be helpful in everyday dental practice. Guidelines are suggested for the design of custom trays, that will, hopefully, lead to improvements in the quality of working impressions.

Rhodesian trypanosomiasis in a splenectomized patient

We report the first apparent case of a splenectomized individual who developed severe trypanosomiasis with central nervous system involvement. The patient was a 41-year-old man who participated in an east African safari. Upon his return to the United States, the patient presented with an infection with Trypanosoma brucei rhodesiense that was treated successfully with suramin and melarsoprol. The onset of symptoms, laboratory studies, and disease progression did not differ from previously reported cases in the literature. The role of the spleen in trypanosomiasis is not well understood and the few reports available describe only animal models. This report suggests that asplenia had no apparent effect on the onset of symptoms and overall severity of illness. Further studies are necessary to ultimately define the role of the spleen in trypanosomiasis.