Fast and robust route to hydroporphyrin-chalcones with extended red or near-infrared absorption

The reaction of an acetylchlorin or diacetylbacteriochlorin with an aldehyde under microwave conditions readily affords the corresponding hydroporphyrin-chalcone. The aldehydes include aryl aldehydes, cinnamaldehyde, and all-trans-retinal. The chalcone causes a bathochromic shift of the long-wavelength absorption band of the hydroporphyrin by up to 24 nm. The facile conjugation and wavelength tunability should make such constructs valuable for fundamental spectroscopic studies as well as diverse photochemical applications in the relatively unexplored red and near-infrared spectral regions.

Imidazole metalloporphyrins as photosensitizers for photodynamic therapy: role of molecular charge, central metal and hydroxyl radical production

The in vitro photodynamic therapy activity of four imidazole-substituted metalloporphyrins has been studied using human (HeLa) and mouse (CT26) cancer cell lines: an anionic Zn porphyrin and a homologous series of three cationic Zn, Pd or InCl porphyrins. A dramatic difference in phototoxicity was found: Pd cationic>InCl cationic>Zn cationic>Zn anionic. HeLa cells were more susceptible than CT26 cells. Induction of apoptosis was demonstrated using a fluorescent caspase assay. The anionic Zn porphyrin localized in lysosomes while the cationic Zn porphyrin localized in lysosomes and mitochondria, as assessed by fluorescence microscopy. Studies using fluorescent probes suggested that the cationic Pd porphyrin produced more hydroxyl radicals as the reactive oxygen species. Thus, the cationic Pd porphyrin has high potential as a photosensitizer and gives insights into characteristics for improved molecular designs.

Solution-state conformational ensemble of a hexameric porphyrin array characterized using molecular dynamics and X-ray scattering

Solution-phase X-ray scattering measurements in combination with coordinate-based modeling have been used to characterize the conformational ensemble of a hexameric, diphenylethyne-linked porphyrin array in solution. Configurationally broadened X-ray scattering patterns measured at room temperature for dilute toluene solutions of the porphyrin array were compared to scattering patterns calculated from structural ensembles in constant pressure and temperature molecular dynamics simulations. Thermal fluctuations sampled at picosecond intervals within nanosecond time scale dynamic simulations show large-amplitude motions that include porphyrin ring "tipping" around the porphyrin linkage axes and extended hexameric porphyrin array "breathing" motions involving torsional distortions collectively distributed along porphyrin and diphenylethyne groups. Each type of group motion produced characteristic, angle-dependent dampening of scattering features that are needed to reproduce dampening features in the experimental X-ray scattering. However, mismatches in the magnitudes of experimental and simulated dampening of high-angle X-ray scattering patterns show that large-amplitude hexamer array breathing-type motions are significantly under-represented in the simulated ensembles. This comparison between experiment and simulation provides a means not only to interpret scattering data in terms of an explicit atomic model but more generally demonstrates the use of solution X-ray scattering as an experimental benchmark for the development of simulation methods that more accurately predict configurational dynamics of supramolecular assemblies.

Energy- and hole-transfer dynamics in oxidized porphyrin dyads

The mechanisms and dynamics of quenching of a photoexcited free base porphyrin (Fb*) covalently linked to a nearby oxidized zinc porphyrin (Zn(+)) have been investigated in a set of five dyads using time-resolved absorption spectroscopy. The dyads include porphyrins joined at the meso-positions by a diphenylethyne linker or a diarylethyne linker with 2,6-dimethyl substitution on either one or both of the aryl rings. Another dyad is linked at the beta-pyrrole positions of the porphyrins via a diphenylethyne linker. The type of linker and attachment site modulate the interporphyrin through-bond electronic coupling via steric hindrance (porphyrin-linker orbital overlap) and attachment motif (porphyrin electron density at the connection site). For each ZnFb dyad, the zinc porphyrin is selectively electrochemically oxidized (to produce Zn(+)Fb), the free base porphyrin is selectively excited with a 130 fs flash (to produce Zn(+)Fb*), and the subsequent dynamics monitored. The Zn(+)Fb* excited state has a lifetime of approximately 3 to approximately 30 ps (depending on the linker steric hindrance and attachment site) and decays by parallel excited-state energy- and hole-transfer pathways. The relative yields of the two channels depend on a number of factors including the linker-mediated through-bond electronic coupling and a modest (< or =20%) Forster through-space contribution for the energy-transfer route. One product of Zn(+)Fb* decay is the metastable ground-state ZnFb(+), which decays to the Zn(+)Fb preflash state by ground-state hole transfer with a linker-dependent rate constant of (20 ps)(-1) to (150 ps)(-1). Collectively, these results provide a detailed understanding of the mechanism and dynamics of quenching of excited porphyrins by nearby oxidized sites, as well as the dynamics of ground-state hole transfer between nonequivalent porphyrins (Zn and Fb). The findings also lay the foundation for the study of ground-state hole transfer between identical porphyrins (e.g., Zn/Zn, Fb/Fb) in larger multiporphyrin arrays wherein a hole is selectively placed via electrochemical oxidation.

Chlorin-bacteriochlorin energy-transfer dyads as prototypes for near-infrared molecular imaging probes: controlling charge-transfer and fluorescence properties in polar media

The photophysical properties of two energy-transfer dyads that are potential candidates for near-infrared (NIR) imaging probes are investigated as a function of solvent polarity. The dyads (FbC-FbB and ZnC-FbB) contain either a free base (Fb) or zinc (Zn) chlorin (C) as the energy donor and a free base bacteriochlorin (B) as the energy acceptor. The dyads were studied in toluene, chlorobenzene, 1,2-dichlorobenzene, acetone, acetonitrile and dimethylsulfoxide (DMSO). In both dyads, energy transfer from the chlorin to bacteriochlorin occurs with a rate constant of approximately (5-10 ps)(-1) and a yield of >99% in nonpolar and polar media. In toluene, the fluorescence yields (Phif=0.19) and singlet excited-state lifetimes (tau approximately 5.5 ns) are comparable to those of the benchmark bacteriochlorin. The fluorescence yield and excited-state lifetime decrease as the solvent polarity increases, with quenching by intramolecular electron (or hole) transfer being greater for FbC-FbB than for ZnC-FbB in a given solvent. For example, the Phif and tau values for FbC-FbB in acetone are 0.055 and 1.5 ns and in DMSO are 0.019 and 0.28 ns, whereas those for ZnC-FbB in acetone are 0.12 and 4.5 ns and in DMSO are 0.072 and 2.4 ns. The difference in fluorescence properties of the two dyads in a given polar solvent is due to the relative energies of the lowest energy charge-transfer states, as assessed by ground-state redox potentials and supported by molecular-orbital energies derived from density functional theory calculations. Controlling the extent of excited-state quenching in polar media will allow the favorable photophysical properties of the chlorin-bacteriochlorin dyads to be exploited in vivo. These properties include very large Stokes shifts (85 nm for FbC-FbB, 110 nm for ZnC-FbB) between the red-region absorption of the chlorin and the NIR fluorescence of the bacteriochlorin (lambdaf=760 nm), long bacteriochlorin excited-state lifetime (approximately 5.5 ns), and narrow (<or=20 nm) absorption and fluorescence bands. The latter will facilitate selective excitation/detection and multiprobe applications using both intensity- and lifetime-imaging techniques.

Tandem dispersion and killing of bacteria from a biofilm

The combined effects of biofilm dispersion with a 2-aminoimidazole-triazole conjugate and bactericidal activity with a photodynamic inactivation agent suggest a novel combination therapy for treating diverse microbial infections.

Comparison of electron-transfer rates for metal- versus ring-centered redox processes of porphyrins in monolayers on Au(111)

The standard electron-transfer rate constants ( k ( 0 )) are measured for redox processes of Fe versus Zn porphyrins in monolayers on Au(111); the former undergoes a metal-centered redox process (conversion between Fe (III) and Fe (II) oxidation states) whereas the latter undergoes a ring-centered redox process (conversion between the neutral porphyrin and the pi-cation radical). Each porphyrin contains three meso-mesityl groups and a benzyl thiol for surface attachment. Under identical solvent (propylene carbonate)/electrolyte (1.0 M Bu 4NCl) conditions, the Zn (II) center has a coordinated Cl (-) ion when the porphyrin is in either the neutral or oxidized state. In the case of the Fe porphyrin, two species are observed a low-potential form ( E l (0) approximately -0.6 V) wherein the metal center has a coordinated Cl (-) ion when it is in either the Fe (II) or Fe (III) state and a high-potential form ( E h (0) approximately +0.2 V) wherein the metal center undergoes ligand exchange upon conversion from the Fe (III) to Fe (II) states. The k ( 0 ) values observed for all of the porphyrins depend on surface concentration, with higher concentrations resulting in slower rates, consistent with previous studies on porphyrin monolayers. The k ( 0 ) values for the ring-centered redox process (Zn chelate) are 10-40 times larger than those for the metal-centered process (Fe chelate); the k ( 0 ) values for the two forms of the Fe porphyrin differ by a factor of 2-4 (depending on surface concentration), the Cl (-) exchanging form generally exhibiting a faster rate. The faster rates for the ring- versus metal-centered redox process are attributed to the participating molecular orbitals and their proximity to the surface (given that the porphyrins are relatively upright on the surface): a pi molecular orbital that has significant electron density at the meso-carbon atoms (one of which is the site of attachment of the linker to the surface anchoring thiol) versus a d-orbital that is relatively well localized on the metal center.

A bipodal-tethered porphyrin for attachment to silicon surfaces in studies of molecular information storage

An approach for molecular information storage entails use of redox-active molecules attached to an electroactive surface. Understanding the structural features that give rise to robust molecular monolayers with high charge density is an essential objective. Toward this goal, a zinc-porphyrin bearing an all-carbon bipodal tether, 5-(1,6-heptadien-4-yl)-15-phenyl-10,20-di-p-tolylporphinatozinc(II), has been synthesized by the reaction of a dipyrromethane and a dipyrromethane-1,9-dicarbinol. The porphyrin was attached to Si(100) via a high temperature procedure. The resulting molecular monolayers exhibited surface coverages, adsorption geometries, electron-transfer rates, and stabilities under repeated electrochemical cycling that are similar to those obtained with monopodal carbon tethers. The observation that the bipodal anchor does not provide enhanced stability is surprising given that attachment is achieved via two versus one covalent linkage.

Metal-molecule interactions upon deposition of copper overlayers on reactively functionalized porphyrin monolayers on Si(100)

The interaction of evaporated Cu deposited on a series of porphyrins in monolayers covalently attached to Si(100) substrates was investigated using cyclic voltammetry and FTIR spectroscopy. Each porphyrin contains a triallyl tripod attached to the porphyrin via a p-phenylene unit. The tripod anchors the porphyrin to the Si(100) substrate via hydrosilylation of the allyl groups. Two of the porphyrins are Zn chelates that possess meso p-cyanophenyl substituentsone, ZnP-CND, contains a single group opposite (distal) to the tripodal surface anchor, whereas the other, ZnP-CNL, contains two groups orthogonal (lateral) to the surface anchor. A third Zn porphyrin, ZnP, containing nonreactive p-tolyl groups at all three nonanchoring meso positions, was examined for comparison. The fourth porphyrin, FbP-HD, is a metal-free species (free base) that contains nonreactive phenyl (distal) and p-tolyl groups (lateral) at the three nonanchoring meso positions. The fifth porphyrin, CuP-HD, is the Cu chelate of FbP-HD, and serves as a reference complex for evaluating the effects of Cu metal deposition onto FbP-HD. The studies indicate that all of the porphyrin monolayers are robust under the conditions of Cu deposition, experiencing no noticeable degradation. In addition, the Cu metal does not penetrate through the monolayer to form electrically conductive filaments. For the ZnP-CND monolayers, the deposited Cu quantitatively reacts/complexes with the distal cyano group. In contrast, for the ZnP-CNL monolayers no reaction/complexation of the lateral cyano groups is observed. For the FbP-HD monolayers, Cu deposition results in quantitative insertion of Cu into the free base porphyrin. Collectively, the studies demonstrate that porphyrin monolayers are amenable to direct deposition of Cu overlayers and that functionalization of the porphyrins can be used to mediate the attributes of the metal-molecule junction.

Effects of substituents on synthetic analogs of chlorophylls. Part 2: Redox properties, optical spectra and electronic structure

The optical absorption spectra and redox properties are presented for 24 synthetic zinc chlorins and 18 free base analogs bearing a variety of 3,13 (beta) and 5,10,15 (meso) substituents. Results are also given for a zinc and free base oxophorbine, which contain the keto-bearing isocyclic ring present in the natural photosynthetic pigments such as chlorophyll a. Density functional theory calculations were carried out to probe the effects of the types and positions of substituents on the characteristics (energies, electron distributions) of the frontier molecular orbitals. A general finding is that the 3,13 positions are more sensitive to the effects of auxochromes than the 5,10,15 positions. The auxochromes investigated (acetyl>ethynyl>vinyl>aryl) cause a significant redshift and intensification of the Qy band upon placement at the 3,13 positions, whereas groups at the 5,10,15 positions result in much smaller redshifts that are accompanied by a decrease in relative Qy intensity. In addition, the substituent-induced shifts in first oxidation and reduction potentials faithfully track the energies of the highest occupied and lowest unoccupied molecular orbitals (HOMO and LUMO), respectively. The calculations show that the LUMO is shifted more by substituents than the HOMO, which derives from the differences in the electron densities of the two orbitals at the substituent sites. The trends in the substituent-induced effects on the wavelengths and relative intensities of the major features (By, Bx, Qx, Qy) in the near-UV to near-IR absorption bands are well accounted for using Gouterman's four-orbital model, which incorporates the effects of the substituents on the HOMO-1 and LUMO+1 in addition to the HOMO and LUMO. Collectively, the results and analysis presented herein and in the companion paper provide insights into the effects of substituents on the optical absorption, redox and other photophysical properties of the chlorins. These insights form a framework that underpins the rational design of chlorins for applications encompassing photomedicine and solar-energy conversion.