Hybrid mesoporous colloid photonic crystal array for high performance vapor sensing

A hybrid mesoporous photonic crystal vapor sensing chip was developed by introducing fluorescent dyes into mesoporous colloidal crystals. The sensing chip was capable of discriminating various kinds of vapors, as well as their concentrations, according to their fluorescence and reflective responses to vapor analytes.

Optimization of the Energy Window for PETbox4, a Preclinical PET Tomograph With a Small Inner Diameter

Small animal positron emission tomography (PET) systems are often designed by employing close geometry configurations. Due to the different characteristics caused by geometrical factors, these tomographs require data acquisition protocols that differ from those optimized for conventional large diameter ring systems. In this work we optimized the energy window for data acquisitions with PETbox4, a 50 mm detector separation (box-like geometry) pre-clinical PET scanner, using the Geant4 Application for Tomographic Emission (GATE). The fractions of different types of events were estimated using a voxelized phantom including a mouse as well as its supporting chamber, mimicking a realistic mouse imaging environment. Separate code was developed to extract additional information about the gamma interactions for more accurate event type classification. Three types of detector backscatter events were identified in addition to the trues, phantom scatters and randoms. The energy window was optimized based on the noise equivalent count rate (NECR) and scatter fraction (SF) with lower-level discriminators (LLD) corresponding to energies from 150 keV to 450 keV. The results were validated based on the calculated image uniformity, spillover ratio (SOR) and recovery coefficient (RC) from physical measurements using the National Electrical Manufacturers Association (NEMA) NU-4 image quality phantom. These results indicate that when PETbox4 is operated with a more narrow energy window (350-650 keV), detector backscatter rejection is unnecessary. For the NEMA NU-4 image quality phantom, the SOR for the water chamber decreases by about 45% from 15.1% to 8.3%, and the SOR for the air chamber decreases by 31% from 12.0% to 8.3% at the LLDs of 150 and 350 keV, without obvious change in uniformity, further supporting the simulation based optimization. The optimization described in this work is not limited to PETbox4, but also applicable or helpful to other small inner diameter geometry scanners.

Photonic crystal microcapsules for label-free multiplex detection

A novel suspension array, which possesses the joint advantages of photonic crystal encoded technology, bioresponsive hydrogels, and photonic crystal sensors with capability of full multiplexing label-free detection is developed.

Synthesis of conjugated linoleic acid by the linoleate isomerase complex in food-derived lactobacilli

AIMS

To assess strains of lactobacilli for their capacity to produce functional fatty acid-conjugated linoleic acid. To assess the linoleate isomerase for CLA production in the most efficient CLA producer.

METHODS AND RESULTS

In this study, strains of food-derived lactobacilli were cultured in media with linoleic acid and CLA production was assessed. Most of the selected strains produced CLA at different levels, with Lactobacillus plantarum ZS2058 being the most efficient CLA producer converting over 50% of linoleic acid to c9, t11-CLA and t9, t11-CLA. Some intermediates 10-hydroxy-cis-12-octadecenoic acid, 10-oxo-cis-12-octadecenoic acid and 10-oxo-trans-11-octadecenoic acid were determined via GC-MS. The genes coding the multicomponent linoleate isomerase containing myosin-cross-reactive antigen, short-chain dehydrogenase/oxidoreductase and acetoacetate decarboxylase for CLA production in Lact. plantarum ZS2058 were cloned and expressed in Escherichia coli. With the mixture of recombinant E. coli, c9, t11-CLA and three kinds of intermediates were produced from linoleic acid, which were in line with those in the lactobacilli.

CONCLUSIONS

The ability for CLA production by lactobacilli exhibited variation. Lactobacillus plantarum and Lact. bulgaricus were the most efficient producers in the selected strains. Lact. plantarum ZS2058 converted linoleic acid to CLAs with 10-hydroxy-cis-12-octadecenoic acid, 10-oxo-cis-12-octadecenoic acid and 10-oxo-trans-11-octadecenoic acid as intermediates. The multiple-step reactions for CLA production catalysed by multicomponent linoleate isomerase in Lact. plantarum ZS2058 were confirmed successfully.

SIGNIFICANCE AND IMPACT OF THE STUDY

Multicomponent linoleate isomerase provides important results for the illustration of the mechanism for CLA production in lactic acid bacteria. Food-derived lactobacilli with CLA production ability offers novel opportunities for functional foods development.

Safe and efficient local gene delivery into skeletal muscle via a combination of Pluronic L64 and modified electrotransfer

Efficient DNA electrotransfer into muscles can be achieved by combining two types of electronic pulses sequentially: short high-voltage (HV) pulse for the cell electropermeabilization and long low-voltage (LV) pulse for the DNA electrophoresis into cells. However, the voltages currently applied can still induce histological and functional damages to tissues. Pluronic L64 has been considered as a molecule possessing cell membrane-disturbing ability. For these reasons, we hope that L64 can be used as a substitute for the HV pulse in cell membrane permeabilization, and a safe LV pulse may still keep the ability to drive plasmid DNA across the permeabilized membrane. In this work, we optimized the electrotransfer parameters to establish a safe and efficient procedure using a clinically applied instrument, and found out that the critical condition for a successful combination of electrotransfer with L64 was that the injection of plasmid/L64 mixture should be applied 1 h before the electrotransfer. In addition, we revealed that the combined procedure could not efficiently transfer plasmid into solid tumor because the uncompressed plasmid may rapidly permeate the leaky tumor vessels and flow away. Altogether, the results demonstrate that the combined procedure has the potential for plasmid-based gene therapy through safe and efficient local gene delivery into skeletal muscles.

Photonic crystal encoded microcarriers for biomaterial evaluation

Photonic crystal encoded biomaterials microcarriers made from silica-hybrid photonic crystal beads are reported. The characteristic reflection peak originating from the physical periodic structure is used as the code of the microcarriers. They are stable during cell adhesion and culture on their surface. Based on this method, Different biomaterials are incorporated into different PCBs and used as encoded microcarriers for the multiplex evaluation of the interaction of cells and materials in a single culture experiment. These encoded microcarriers are ideal for multiplex bioevaluation of biomaterials or drug applications.

Tunable fiber Bragg grating based on responsive photonic crystals

A tunable fiber Bragg grating (FBG) was developed by using stress-responsive colloidal crystals. In addition, the FBGs with the function of dynamically filtering multiple wavelengths were also demonstrated by incorporating multiple colloidal crystal segments into the fibers.

Cardiorenal metabolic syndrome and diabetic cognopathy

The prevalence of the cardiorenal metabolic syndrome (CRS) is increasing in parallel with obesity, type 2 diabetes mellitus, Alzheimer's disease, and other forms of dementia. Along with metabolic, inflammatory, and immunological abnormalities, there is maladaptive structural remodeling of the heart, kidney, and brain. The term 'diabetic cognopathy' (DC) may be used when discussing functional and structural changes in the brain of the diabetic patient. DC likely represents an advanced form of these changes in the brain that evolve with increasing duration of the CRS and subsequent clinical diabetes. We posit that DC develops due to a convergence of aging, genetic and lifestyle abnormalities (overnutrition and lack of exercise), which result in multiple injurious metabolic and immunologic toxicities such as dysfunctional immune responses, oxidative stress, inflammation, insulin resistance, and dysglycemia (systemically and in the brain). These converging abnormalities may lead to endothelial blood-brain barrier tight junction/adherens junction (TJ/AJ) complex remodeling and microglia activation, which may result in neurodegeneration, impaired cognition, and dementia. Herein, we describe the brain ultrastructural changes evolving from a normal state to maladaptive remodeling in rodent models of CRS including microglia activation/polarization and attenuation and/or loss of the TJ/AJ complexes, pericytes and astrocytes of the neurovascular unit. Further, we discuss the potential relationship between these structural changes and the development of DC, potential therapeutic strategies, and future directions.

Microfluidic generation of magnetoresponsive Janus photonic crystal particles

Janus particles with features of an anisotropic photonic band gap (PBG) structure and magnetic property have been achieved by phase separation and self-assembly of nanoparticles in microfluidic droplets. The resultant particles enable optical encoding and magnetically controllable motion, making them excellent functional encoded particles in biomedical applications.

Pressure and inflammatory stimulation induced increase of cadherin-11 is mediated by PI3K/Akt pathway in synovial fibroblasts from temporomandibular joint

OBJECTIVE

The goal of the study was to investigate the expression of cadherin-11 in synovial fibroblasts (SFs) under mechanical or inflammatory stimuli, and its potential relationship with PI3K/Akt signaling pathway.

METHODS

SFs separated from rat temporomandibular joint (TMJ) were treated with hydrostatic pressures (HP) of 30, 60, 90, and 120 kPa, as well as tumor necrosis factor-α (TNF-α) for 12, 24, 48, and 72 h. The location of cadherin-11 was observed by immunofluorescence microscopy, and its expression was detected by real-time PCR and Western blot. We also studied the activation of PI3K/Akt signaling pathway in SFs with HP or TNF-α stimulation.

RESULTS

The results showed that increased expression of cadherin-11 could be found in the cell-cell contact site of SFs in response to HP and inflammatory stimulation. The mRNA and protein expression of cadherin-11 was positively correlated with the intensity of HP and the duration time of TNF-α treatment. Increased expression of vascular endothelial growth factor-D (VEGF-D) and activation of Akt were also found. Treatment with PI3K inhibitor LY294002 attenuated the pressure or inflammatory cytokine induction increases of cadherin-11, VEGF-D, and FGF-2 both in mRNA and protein levels.

CONCLUSIONS

These findings suggest that cadherin-11 may play important roles in SFs following exposure to mechanical loading and inflammatory stimulation. In addition, PI3K/Akt pathway was associated with pressure or inflammation-induced cadherin-11 expression, which may involve in the pathogenesis of temporomandibular diseases.

Tailoring colloidal photonic crystals with wide viewing angles

Photonic crystal materials are developed from colloidal crystal fibers or beads. As the fibers have cylindrical symmetry, the fiber-composed PhCs show anisotropic angle independence. By contrast, the bead-composed PhCs display angle-independent structural colors because of the spherical symmetry of their bead elements.

Association of the polymorphism of MMP2 with the risk and severity of lumbar disc degeneration in the Chinese Han population

OBJECTIVE

The present study aimed to determine whether the -735 C/T polymorphism of the Matrix Metalloproteinase 2 (MMP2) gene is associated with the risk and severity of lumbar disc degeneration (LDD) in the Chinese Han population.

PATIENTS AND METHODS

A total of 1008 patients with LDD and 906 healthy controls were enrolled in this study. The grade of disc degeneration was determined according to Schneiderman's classification for Magnetic Resonance Imaging (MRI). The -735 C/T polymorphism of MMP2 was genotyped using polymerase chain reaction and the restriction fragment length polymorphism method.

RESULTS

The genotype frequency of the -735 C/T polymorphism was in agreement with the Hardy-Weinberg equilibrium (p = 0.087). The frequencies of the -735CT and TT genotypes were significantly lower among LDD patients compared with normal controls (p < 0.001); CT and TT genotype were significantly associated with a decreased risk of LDD compared with the CC genotype (for TT genotype, p = 0.031; OR 0.413; 95% CI 0.184-0.924; for CT genotype, p < 0.001, OR 0.645, 95% CI 0.506-0.822). Patients with LDD showed significantly higher frequencies of the C allele than normal controls (p < 0.001), T allele was significantly associated with a decreased risk of LDD compared with the C allele (p < 0.001; OR 0.631; 95% CI 0.508-0.783). In addition, the -735TT and CT genotypes, as well as the T allele were associated with lower degenerative grades of LDD compared with CC genotype and the C allele, respectively (both p < 0.001).

CONCLUSIONS

The -735 C/T polymorphism of MMP2 may be associated with the risk and severity of LDD in the Chinese Han population.

Photonic crystal beads from gravity-driven microfluidics

This Letter reports a simple method for the mass production of 3D colloidal photonic crystal beads (PCBs) by using a gravity-driven microfluidic device and online droplet drying method. Compared to traditional methods, the droplet templates of the PCBs are generated by using the ultrastable gravity as the driving force for the microfluidics, thus the PCBs are formed with minimal polydispersity. Moreover, drying of the droplet templates is integrated into the production process, and the nanoparticles in the droplets self-assemble online. Overall, this process results in PCBs with good morphology, low polydispersity, brilliant structural colors, and narrow stop bands. PCBs could be bulk generated by this process for many practical applications, such as multiplex-encoded assays and the construction of novel optical materials.

NEMA NU-4 performance evaluation of PETbox4, a high sensitivity dedicated PET preclinical tomograph

PETbox4 is a new, fully tomographic bench top PET scanner dedicated to high sensitivity and high resolution imaging of mice. This manuscript characterizes the performance of the prototype system using the National Electrical Manufacturers Association NU 4-2008 standards, including studies of sensitivity, spatial resolution, energy resolution, scatter fraction, count-rate performance and image quality. The PETbox4 performance is also compared with the performance of PETbox, a previous generation limited angle tomography system. PETbox4 consists of four opposing flat-panel type detectors arranged in a box-like geometry. Each panel is made by a 24 × 50 pixelated array of 1.82 × 1.82 × 7 mm bismuth germanate scintillation crystals with a crystal pitch of 1.90 mm. Each of these scintillation arrays is coupled to two Hamamatsu H8500 photomultiplier tubes via a glass light guide. Volumetric images for a 45 × 45 × 95 mm field of view (FOV) are reconstructed with a maximum likelihood expectation maximization algorithm incorporating a system model based on a parameterized detector response. With an energy window of 150-650 keV, the peak absolute sensitivity is approximately 18% at the center of FOV. The measured crystal energy resolution ranges from 13.5% to 48.3% full width at half maximum (FWHM), with a mean of 18.0%. The intrinsic detector spatial resolution is 1.5 mm FWHM in both transverse and axial directions. The reconstructed image spatial resolution for different locations in the FOV ranges from 1.32 to 1.93 mm, with an average of 1.46 mm. The peak noise equivalent count rate for the mouse-sized phantom is 35 kcps for a total activity of 1.5 MBq (40 µCi) and the scatter fraction is 28%. The standard deviation in the uniform region of the image quality phantom is 5.7%. The recovery coefficients range from 0.10 to 0.93. In comparison to the first generation two panel PETbox system, PETbox4 achieves substantial improvements on sensitivity and spatial resolution. The overall performance demonstrates that the PETbox4 scanner is suitable for producing high quality images for molecular imaging based biomedical research.

FcγRI is required for TGFβ2-treated macrophage-induced tolerance

Macrophages treated with TGFβ2 (TGFβ2-Mϕ) and antigen are highly tolerogenic in vivo, and induce antigen-specific and long-lasting tolerance in both naïve and primed mice via induction of suppressor/regulatory T cells. In this study, we examined the molecular pathways, including the requirements for Smad-dependent signaling, that are involved in the induction and function of tolerogenic TGFβ2-Mϕ. Treatment of murine macrophages with TGFβ2 induced translocation of Smad2/3 to the nucleus, and impairment of Smad3-, but not Smad2-, dependent signaling inhibited the tolerogenic function of a TGFβ2-treated murine macrophage cell line. Gene expression in murine macrophages treated with TGFβ2 was evaluated by microarray analysis. The FcγRI gene was one of a number of immune-related genes differentially expressed in TGFβ2-Mϕ, and appeared to be critical for tolerance in this system, since TGFβ2-Mϕ from FcγRI deficient mice were unable to induce tolerance. The role that FcγRI plays in TGFβ2-Mϕ-mediated tolerance is currently unclear. The results of this study provide important information about the factors that are critical for the induction of TGFβ2-Mϕ-mediated tolerance, and a better understanding of these mechanisms could lead to the development of more effective tolerance-inducing strategies for the treatment of autoimmune/inflammatory diseases.