Selective nucleation of chitin nanocrystals in the crystallization of poly(ε-caprolactone-b-l-lactide) diblock copolymer composites

Rod-like chitin nanocrystals (ChNCs) filled biodegradable aliphatic polyesters are of great interest because as-obtained nanocomposites are all-degradable. In this work, we prepared a poly(ε-caprolactone-b-l-lactide) (PCL-b-PLA) copolyester nanocomposite with ChNCs and carried out a crystallization study. The results disclosed that the roles of ChNCs played during crystallization of copolyester matrices were very attractive: as heterogeneous nucleator of PLA phase, whereas as inert filler for PCL phase. Thus, the overall crystallization kinetics of PLA phase were accelerated. The heterogeneous nucleation led to the formation of more amounts of crystallized PLA domains, which favored nucleating following crystallization of PCL phase. In addition, the presence of ChNCs did not strongly influence the microphase-segregated structure of PCL-b-PLA, and had good reinforcements to matrix copolymer. The selective nucleation ability of ChNCs reported in this study is valuable for regulating the structures and properties of nanocomposites based on the ChNCs-filled aliphatic diblock copolyester with double crystalline blocks.

Studies on Modification of Polyamide 6 Plastics for Hydrogen Storage

Polyamide 6 (PA6) can be used as the liner material of a type IV hydrogen storage tank, but its high hydrogen permeability and poor low-temperature toughness limit its application in related fields. In this work, PA6 composites were prepared by introducing graphene with different contents and a nano two-dimensional lamellar filler via the melt blending method, and the effects of the graphene content on the crystallization properties, mechanical properties, and hydrogen barrier properties of the composites were investigated. The results showed that composites containing 2.0 wt% graphene exhibited the best overall performance, and compared with PA6, the crystallization properties, normal-temperature impact strength and low-temperature impact strength of the composites were increased by 16.0%, 130.6% and 111.7%, respectively, and the helium permeability coefficient was decreased by 33.2%. Graphene enhances the crystallinity and lamellar thickness of the composites. Additionally, its two-dimensional lamellar structure can also increase the diffusion path of gas molecules, thereby improving the barrier properties of the composites.

Revealing microscale bulk structures in polymer-carbon nanocomposites using spin-echo SANS

We have used spin-echo small-angle neutron scattering (SESANS) to probe the hierarchy of structures present in polymer-carbon nanocomposites, with length scales spanning over three orders of magnitude, from 10 nm to 16 μm. The data processing and reduction show a unified approach across two SESANS instruments (TU Delft and Larmor at the ISIS neutron source) and yield consistent data that are able to be modelled using well-established hierarchical models in freely available software such as SasView. Using this approach, we are able to extend the measured length scales by over an order of magnitude compared to traditional scattering methods. This yields information about the structure in the bulk that is inaccessible with conventional scattering techniques (SANS/SAXS) and points to a way for interrogating and investigating polymer nanocomposites routinely across multiple length scales.

Multi-scale correlation of impact-induced defects in carbon fiber composites using X-ray scattering and machine learning

Impact-induced defects in carbon fiber-reinforced polymers (CFRPs)-spanning from nanometer to macroscopic length scales-can be monitored using an aggregate of X-ray-based methods, but this is impractical in typical field conditions. We report on a low-velocity impacted CFRP, which is mapped using small- and wide-angle X-ray scattering and X-ray computed tomography, and employ machine learning for correlating material parameterizations derived from these techniques. The observed 1 μ m to 1 mm-sized defects are parameterized in terms of relative density and fiber orientation indicative of fiber failures (kink bands), and the nanometer sized defects in terms of crystal size and unit cell frustration. The 30 to 300 nm defects are parameterized by a power-law scattering decay, differentiating fractal-like behaviors. We find three spatial domains experimentally and by K-means Clustering: Domains of severe damage (with a visual dent), intact domains (without visual or measurable defects) and a transition domain (defects measurable by X-rays). How the parameters are correlated and how they overlap between the domains are discussed. All parameters are able to point to the detrimental fiber breakage in the severe damage domain, and scattering decay also in the transition domain, for example. How individual parameters determined from one experimental technique can be predicted from that of another is also described.

Adding Rare Earth Oxide Markers to Polyoxymethylene to Improve Plastic Recycling through Tracer-Based Sorting

Engineering plastics, such as polyoxymethylene (POM), are high-performance thermoplastics designed to withstand high temperature or mechanical stress and are used in electronic equipment, the automotive industry, construction, or specific household utensils. POM is immiscible with other plastics but due to a low volume of production, no methods were developed to separate it from the residual plastic waste stream. Therefore, POM recycling is minimal despite its high market value. This paper provides a proof of concept for tracer-based sorting (TBS) as a potential solution for increasing the separation efficiency of low-volume, high-quality polymers. For this purpose, yttrium oxide (Y2O3) and cerium (IV) oxide (CeO2) have been embedded into the POM matrix. Mechanical tests of samples at varying concentrations (0.1 to 1000 ppm) of both tracers were conducted, followed by an analysis of detectability and dispersibility using a portable X-ray fluorescence spectrometer (p-XRF), subsequently optimizing detection time and tracer concentration. Finally, an experimental scenario was developed to test the fate and potential recovery of the tracer material after the thermal treatment of plastics. A low detectable concentration, short measurement time, low influence on mechanical parameters of the compound, and low loss ratio after simulated recycling prove Y2O3 to be a suitable tracer for the industrial implementation of TBS.

The Nanoscale Structure and Stability of Organic Photovoltaic Blends Processed with Solvent Additives

Controlling the nanomorphology in bulk heterojunction photoactive blends is crucial for optimizing the performance and stability of organic photovoltaic (OPV) technologies. A promising approach is to alter the drying dynamics and consequently, the nanostructure of the blend film using solvent additives such as 1,8-diiodooctane (DIO). Although this approach is demonstrated extensively for OPV systems incorporating fullerene-based acceptors, it is unclear how solvent additive processing influences the morphology and stability of nonfullerene acceptor (NFA) systems. Here, small angle neutron scattering (SANS) is used to probe the nanomorphology of two model OPV systems processed with DIO: a fullerene-based system (PBDB-T:PC71BM) and an NFA-based system (PBDB-T:ITIC). To overcome the low intrinsic neutron scattering length density contrast in polymer:NFA blend films, the synthesis of a deuterated NFA analog (ITIC-d52) is reported. Using SANS, new insights into the nanoscale evolution of fullerene and NFA-based systems are provided by characterizing films immediately after fabrication, after thermal annealing, and after aging for 1 year. It is found that DIO processing influences fullerene and NFA-based systems differently with NFA-based systems characterized by more phase-separated domains. After long-term aging, SANS reveals both systems demonstrate some level of thermodynamic induced domain coarsening.

Fully Bio-Based 2,5-Furandicarboxylic Acid Polyester toward Plastics with Mechanically Robust, Excellent Gas Barrier and Fast Degradation

Aliphatic-aromatic copolyesters offer a promising solution to mitigate plastic pollution, but high content of aliphatic units (>40 %) often suffer from diminished comprehensive performances. Poly(butylene oxalate-co-furandicarboxylate) (PBOF) copolyesters were synthesized by precisely controlling the oxalic acid content from 10 % to 60 %. Compared with commercial PBAT, the barrier properties of PBOF for H2O and O2 increased by more than 6 and 26 times, respectively. The introduction of the oxalic acid units allowed the water contact angle to be reduced from 82.5° to 62.9°. Superior hydrophilicity gave PBOF an excellent degradation performance within a 35-day hydrolysis. Interestingly, PBO20F and PBO30F also displayed obvious decrease of molecular weight during hydrolysis, with elastic modulus >1 GPa and tensile strength between 35-54 MPa. PBOF achieved the highest hydrolysis rates among the reported PBF-based copolyesters. The hydrolytic mechanism was further explored based on Fukui function analysis and density functional theory (DFT) calculation. Noncovalent analysis indicated that the water molecules formed hydrogen bonding interaction with adjacent ester groups and thus improved the reactivity of carbonyl carbon. PBOF not only meet the requirements of the high-performance packaging market but can quickly degrade after the end of their usage cycles, providing a new choice for green and environmental protection.

Controlling Microstructure-Transport Interplay in Poly(ether-block-amide) Multiblock Copolymer Gas Separation Membranes

In this study, we investigated the effect of morphology on the gas-transport properties of a poly(ether-block-amide) (PEBA) multiblock copolymer. We annealed the copolymer samples and varied the annealing temperature to evaluate the influence of changes in the microstructure on the gas transport properties of PEBA. In addition, we used time-resolved attenuated total reflection Fourier transform infrared spectroscopy to evaluate the diffusion coefficient of CO2 in PEBA based on the Fickian model. The effect of the annealing temperature on the microphase-separated structure of the multiblock copolymer is discussed in detail. Furthermore, the gas diffusivity was significantly affected by the purity of the soft domains. The annealed sample demonstrated a 38% increase in CO2 permeability while maintaining a high CO2/N2 permselectivity of approximately 53. The findings of this study provide valuable insight into the design and optimization of PEBA membranes for gas separation applications.

Effect of a Self-Assembled Nucleating Agent on the Crystallization Behavior and Spherulitic Morphology of Poly(lactic acid)

Herein, decanedioic acid dibenzoylhydrazide (DDBH) was used as a nucleating agent to improve the crystallization of poly(lactic acid) (PLA). The formation of DDBH assemblies in PLA melts at different concentrations was systematically investigated. The DDBH (0.5-0.9 wt %) recrystallized as dendrite-like structures during the isothermal crystallization process, and the crystal morphology of PLA underwent a morphological change from spherical form to a similar dendritic crystal form. Differential scanning calorimetry and in situ wide-angle X-ray diffraction analysis results showed that crystallizability and overall crystallization rate of PLA were enhanced by the addition of DDBH. The half-crystallization time at 120 °C reduced to 0.28 min compared to pure PLA (6.12 min), after adding 0.9 wt % DDBH. Moreover, the crystallinity and lamellar thickness of crystalline PLA increased, while the size of the microcrystal of PLA decreased with an increase in DDBH content. The heat deflection temperatures of PLA/DDBH blends increased and hence heat resistance improved.

Melt stretching and quenching produce low-crystalline biodegradable poly(lactic acid) filled with β-form shish for highly improved mechanical toughness

High-toughness biodegradable poly(lactic acid) (PLA) has always been intensively pursued on the way of replacing traditional petroleum-based plastics. Regulating microstructures to achieve self-toughening holds great promise due to avoidance of incorporating other heterogeneous components. Herein, we propose a straightforward and effective way to tailor microstructures and properties of PLA through melt-stretching and quenching of slightly crosslinked samples. The melt stretching drives chains orientation and crystallization at high temperature, while the quenching followed can freeze the crystallization process to any stage. For the first time, we prepare a type of transparent and low-crystalline PLA filled with rod-like β-form shish, which displays an outstanding tensile toughness, almost 17 times that of the conventional technique-processed one. This mechanical superiority is enabled by an integration of high ductility due to oriented chain network, and high tensile stress endowed by nanofibrous filler's role of β-form shish. Furthermore, the mechanically toughened PLA is demonstrated to generate the richest micro-cracks and shear bands under loading, which can effectively dissipate the deformational energy and underlie the high toughness. This work opens a new prospect for the bottom-up design of high-performance bio-based PLA materials that are tough, ductile and transparent by precise microstructural regulation through scalable melt processing route.

Assessment of the structures contribution (crystalline and mesophases) and mechanical properties of polycaprolactone/pluronic blends

Films of biodegradable blends of polycaprolactone (PCL) and Pluronics F68 and F127 were manufactured by an industrial thermo-mechanical process to be applied as potential delivery systems. The effects of Pluronics on the structure (mesophase organization), and thermal and mechanical properties of polycaprolactone were investigated using differential scanning calorimetry (DSC), small-angle X-ray scattering (SAXS), X-ray diffraction (XRD), polarized optical microscopy (POM) and tensile mechanical tests. The addition of Pluronics affected the crystallization process by changing the relative amounts of crystalline, amorphous, and meso- (condis + plastic) phases. The melting transition and XRD profiles were deconvoluted to assess the individual contribution of the different crystal morphologies. Furthermore, it was found that the mechanical properties of the blends depended on the ratio and type of Pluronic. Thus, Pluronic F127 showed a larger mesophase content than its F68 counterpart with PCL and blends with enhanced ductility.

Effects of network junctions and defects on the crystallization of model poly(ethylene glycol) networks

Polymer crystallization drastically changes the physical properties of polymeric materials. However, the crystallization in polymer networks has been little explored. This study investigated the crystallization behavior of a series of poly(ethylene glycol) (PEG) networks consisting of well-defined branched precursors. The PEG networks were prepared by drying gels synthesized at various conditions. The PEG networks showed slower crystallization with lower final crystallinity than uncrosslinked PEGs with amine end groups. Surprisingly, the effect of network formation was not as significant as that of the relatively bulky end-groups introduced in the uncrosslinked polymer. The molecular weight of the precursor PEG, or equivalently the chain length between neighboring junctions, was the primary parameter that affected the crystallization of the PEG networks. Shorter network chains led to lower crystallization rates and final crystallinity. This effect became less significant as the network chain length increased. On the other hand, the spatial and topological defects formed in the gel synthesis process did not affect the crystallization in the polymer networks at all. The crystallization in the polymer networks seems insensitive to these mesoscopic defects and can be solely controlled by the chain length between junctions.

Interfacial Engineering of PVDF-TrFE toward Higher Piezoelectric, Ferroelectric, and Dielectric Performance for Sensing and Energy Harvesting Applications

The electrical properties of pristine fluoropolymers are inferior due to their low polar crystalline phase content and rigid dipoles that tend to retain their fixed moment and orientation. Several strategies, such as electrospinning, electrohydrodynamic pulling, and template-assisted growing, have been proven to enhance the electrical properties of fluoropolymers; however, these techniques are mostly very hard to scale-up and expensive. Here, a facile interfacial engineering approach based on amine-functionalized graphene oxide (AGO) is proposed to manipulate the intermolecular interactions in poly(vinylidenefluoride-trifluoroethylene) (PVDF-TrFE) to induce β-phase formation, enlarge the lamellae dimensions, and align the micro-dipoles. The coexistence of primary amine and hydroxyl groups on AGO nanosheets offers strong hydrogen bonding with fluorine atoms, which facilitates domain alignment, resulting in an exceptional remnant polarization of 11.3 µC cm^-2 . PVDF-TrFE films with 0.1 wt.% AGO demonstrate voltage coefficient, energy density, and energy-harvesting figure of merit values of 0.30 Vm N^-1 , 4.75 J cm^-3 , and 14 pm³  J^-1 , respectively, making it outstanding compared with state-of-the-art ceramic-free ferroelectric films. It is believed that this work can open-up new insights toward structural and morphological tailoring of fluoropolymers to enhance their electrical and electromechanical performance and pave the way for their industrial deployment in next-generation wearables and human-machine interfaces.

A combined melt-stretching and quenching setup for experimental studies of polymer crystallization under complex flow-temperature environments

A combined melt-stretching and quenching setup is designed and developed to allow experimental investigations of polymer crystallization under the complex flow-temperature environments comparable to those encountered in the actual industrial processing. The melt-stretching proceeds by two drums rotating in the opposite directions with simultaneous recording of a stress-strain curve, where the Hencky strain and strain rate (≤233 s^-1) are adjustable over a large range. After stretching, liquid N₂ is used as a cooling medium to quench the free-standing melt, which is sprayed directly to the deformed melt driven by an electric pump. To ensure a high cooling efficiency, a three-way solenoid valve is employed to execute a sequential control of the liquid N₂ flow direction to reduce the boil-off of liquid N₂ before entering the sample chamber. The melt cooling rate depends on the liquid N₂ flow rate controlled by a flow valve, which is up to 221 °C/s when quenching the isotactic polypropylene (iPP) melt with a thickness of 0.28 mm at 150 °C. Two independent temperature control modules are designed to meet the requirements of different stages of melt-stretching and quenching. To verify the capability of the setup, we have performed the melt-stretching and quenching experiments on iPP samples. The setup is demonstrated to be a valuable new tool to study polymer crystallization under coupled flow-cooling fields.

Morphology modulation of artificial muscles by thermodynamic-twist coupling

Human muscles can grow and change their length with body development; therefore, artificial muscles that modulate their morphology according to changing needs are needed. In this paper, we report a strategy to transform an artificial muscle into a new muscle with a different morphology by thermodynamic-twist coupling, and illustrate its structural evolution during actuation. The muscle length can be continuously modulated over a large temperature range, and actuation occurs by continuously changing the temperature. This strategy is applicable to different actuation modes, including tensile elongation, tensile contraction and torsional rotation. This is realized by twist insertion into a fibre to produce torsional stress. Fibre annealing causes partial thermodynamic relaxation of the spiral molecular chains, which serves as internal tethering and inhibits fibre twist release, thus producing a self-supporting artificial muscle that actuates under heating. At a sufficiently high temperature, further relaxation of the spiral molecular chains occurs, resulting in a new muscle with a different length. A structural study provides an understanding of the thermodynamic-twist coupling. This work provides a new design strategy for intelligent materials.

Effect of Interphase Properties on Isothermal and Non-isothermal Crystallization Behavior of Poly(lactic acid)/Acetylated Starch Blends

The effect of interphase properties on the crystallization behavior of blends of poly(lactic acid) (PLA)/acetylated starch (AS) with different degrees of substitution (DSs) was investigated. Under isothermal crystallization conditions, the rate of crystallization was higher for PLA/DS0.5 and lower for PLA/DS1.5 and PLA/DS2.5 when compared to PLA. In contrast, non-isothermal crystallization behavior indicated a slower rate of crystallization of PLA/DS0.5 and a faster rate of crystallization of PLA/DS1.5 and PLA/DS2.5 compared to PLA at the highest cooling rate (5 °C/min). The potential relationship between crystallization behavior and interphase properties and interphase thickness and formation of rigid amorphous fraction in the interphase, was investigated. The formation of a rigid amorphous fraction in PLA/DS1.5 and a thick interphase in PLA/DS2.5 prevented the formation of crystals on the dispersed phase and interrupted the crystallization under isothermal conditions. Hydrogen bonding in the PLA/DS1.5 blend and hydrophobic interactions in the PLA/DS2.5 blend may facilitate the crystallization at high cooling rates under non-isothermal conditions. Small-angle X-ray scattering analysis revealed the presence of a smaller lamellar structure in PLA/AS blends. The largest amorphous phase among blends was observed for the PLA/DS1.5 blend, which can be attributed to the hydrogen bonding in the interphase region of this blend.

Crystallinity and Gas Permeability of Poly (Lactic Acid)/Starch Nanocrystal Nanocomposite

The present work seeks to determine the impact of weight percentage (wt%) of grafted starch nanocrystals (g-SNCs) on the oxygen and water vapour permeability of poly (lactic acid), PLA. Changes in the oxygen and water vapour permeability of PLA due to changes in PLA’s crystalline structures and lamellar thickness were quantified. To this end, 3, 5, and 7 wt% of g-SNC nanoparticles were blended with PLA using the solvent casting method in order to study impact of g-SNC nanoparticles on crystallization behaviour, long spacing period, melting behavior, and oxygen and water barrier properties of PLA nanocomposites. This was achieved by wide-angle X-ray diffraction (WAXD), small-angle X-ray diffraction (SAXD), differential scanning calorimetry (DSC), and oxygen and water vapour permeability machine. The results of the WAXD and SAXD analysis show that the addition of 5 wt% g-SNC in PLA induces α crystal structure at a lower crystallization time, while it significantly increases the α crystal thickness of PLA, in comparison to neat PLA. However, when g-SNC concentrations were altered (i.e., 3 or 7 wt%), the crystallization time was found to increase due to the thermodynamic barrier of crystallization. Finally, the oxygen and water vapour permeability of PLA/SNC-g-LA (5 wt%) nanocomposite film were found to be reduced by ∼70% and ~50%, respectively, when compared to the neat PLA film. This can lead to the development of PLA nanocomposites with high potential for applications in food packaging.

Light-Induced Crystalline Size Heterogeneity of Polymers Enables Programmable Writing, Morphing, and Mechanical Performance Designing

Constructing the spatio-selective crystalline structures has been an effective strategy to diversify the functions and applications of polymers. However, it is still challenging to program the crystalline heterogeneity into commercialized polymers and realize associate functions by a simple yet generalizable method. Herein, we propose a facile approach to fabricate multifunctional materials by programming the spatial distribution of crystal size in semicrystalline polymers. Various crystal size patterns in both plane and depth directions are introduced by the photothermal effect of printed ink and subsequent crystallization at different temperatures, which can be reprogrammed by repeated melting and crystallization. These obtained materials with well-defined crystal size heterogeneities exhibit diverse and regulable optics, mechanical and swelling properties, as manifested in applications including rewritable polymer paper, programmed mechanics, and advanced morphing devices. The light-induced crystal size heterogeneity of polymers has provided insights into developing advanced multifunctional materials.

Additive Manufactured Poly(ε-caprolactone)-graphene Scaffolds: Lamellar Crystal Orientation, Mechanical Properties and Biological Performance

Understanding the mechano-biological coupling mechanisms of biomaterials for tissue engineering is of major importance to assure proper scaffold performance in situ. Therefore, it is of paramount importance to establish correlations between biomaterials, their processing conditions, and their mechanical behaviour, as well as their biological performance. With this work, it was possible to infer a correlation between the addition of graphene nanoparticles (GPN) in a concentration of 0.25, 0.5, and 0.75% (w/w) (GPN0.25, GPN0.5, and GPN0.75, respectively) in three-dimensional poly(ε-caprolactone) (PCL)-based scaffolds, the extrusion-based processing parameters, and the lamellar crystal orientation through small-angle X-ray scattering experiments of extruded samples of PCL and PCL/GPN. Results revealed a significant impact on the scaffold's mechanical properties to a maximum of 0.5% of GPN content, with a significant improvement in the compressive modulus of 59 MPa to 93 MPa. In vitro cell culture experiments showed the scaffold's ability to support the adhesion and proliferation of L929 fibroblasts (fold increase of 28, 22, 23, and 13 at day 13 (in relation to day 1) for PCL, GPN0.25, GPN0.5, and GPN0.75, respectively) and bone marrow mesenchymal stem/stromal cells (seven-fold increase for all sample groups at day 21 in relation to day 1). Moreover, the cells maintained high viability, regular morphology, and migration capacity in all the different experimental groups, assuring the potential of PCL/GPN scaffolds for tissue engineering (TE) applications.

Nucleation roles of cellulose nanocrystals and chitin nanocrystals in poly(ε-caprolactone) nanocomposites

Using polysaccharide nanocrystals such as chitin nanocrystals (ChNCs) or cellulose nanocrystals (CNCs) as fillers of biodegradable aliphatic polyesters is an attractive approach of fabricating completely biodegradable nanocomposites. Most aliphatic polyesters are semi-crystalline and hence to reveal the effect of nanocrystals on their crystallization behaviors is key to regulate final properties of the nanocomposites. In this work, poly(ε-caprolactone) (PCL) nanocomposites filled with ChNCs and CNCs were prepared as templates for the study. It is intriguing that these two nanocrystals play completely different roles towards crystallization of PCL. CNCs are nucleating agent, promoting nucleation of PCL and accelerating subsequent crystal growth; while ChNCs are anti-nucleation agent, retarding nucleation of PCL and depressing whole process of PCL crystallization. This difference arises from different particle-polymer affinities in the nanocomposites, which is confirmed by the thermodynamic and rheological tests. This work provides valuable information around tuning the thermal properties of polysaccharide nanocrystals filled polymeric nanocomposites.

Chain dimension and crystallization temperature affect the – transition of isotactic polybutene-1

The molecular weight dependence of the II–I phase transformation shows significant differences between isothermally and non-isothermally crystallized iPB-1.

Artifact removal in the contour areas of SAXS-CT images by Tikhonov-L1 minimization

Small-angle X-ray scattering (SAXS) coupled with computed tomography (CT), denoted SAXS-CT, enables the spatial distribution of the characteristic parameters of nanoscale structures inside samples to be visualized. In this work, a new scheme with Tikhonov regularization was developed to remove the effects of artifacts caused by streak scattering originating from contour regions of the sample.

Small-angle X-ray scattering (SAXS) coupled with computed tomography (CT), denoted SAXS-CT, has enabled the spatial distribution of the characteristic parameters (e.g. size, shape, surface, length) of nanoscale structures inside samples to be visualized. In this work, a new scheme with Tikhonov regularization was developed to remove the effects of artifacts caused by streak scattering originating from the reflection of the incident beam in the contour regions of the sample. The noise due to streak scattering was successfully removed from the sinogram image and hence the CT image could be reconstructed free from artifacts in the contour regions.

Insight into melting point depression of polylactide nanocomposites with acetylated chitin nanocrystals

Chitin nanocrystal (ChNC) was used to prepare fully biodegradable nanocomposites with polylactide (PLA). The nucleation and melting behavior of nanocomposites were studied with the objective to correlate PLA-ChNC affinity to PLA crystallization. The results disclose that the PLA nanocomposites with pristine ChNCs and the ones with acetylated ChNCs show completely different nucleation and melting behavior because the role of ChNCs is altered after acetylation. Pristine ChNC acts as inert filler, with weak nucleating activity, while acetylated ChNCs as anti-nucleation agent, restraining crystallization of PLA. Accordingly, the nanocomposites with acetylated ChNCs show melting point depression, with reduced nucleation capability. The recrystallization and self-nucleation, as well as the double-melting behaviors were then studied in terms of acetylation levels of ChNCs and annealing temperatures, in order to better understand the relations between two-phase affinity and PLA chain dynamics. This work provides interesting information around designing thermal properties of the ChNC-filled PLA nanocomposites.

Structural Evolution of Polyglycolide and Poly(glycolide-co-lactide) Fibers during In Vitro Degradation with Different Heat-Setting Temperatures

The structural evolution of polyglycolide (PGA) and poly(glycolide-co-lactide) (P(GA-co-LA)) with 8% LA content fibers with different heat-setting temperatures was investigated during in vitro degradation using WAXD, SAXS, and mechanical property tests. It was found that the PGA fiber was more susceptible to the degradation process than the P(GA-co-LA) fiber and a higher heat-setting temperature reduced the degradation rate of the two samples. The weight and mechanical properties of the samples showed a gradual decrease during degradation. We proposed that the degradation of PGA and P(GA-co-LA) fibers proceeded in four stages. A continuous increase in crystallinity during the early stage of degradation and a gradual decline during the later period indicated that preferential hydrolytic degradation occurred in the amorphous regions, followed by a further degradation in the crystalline regions. The cleavage-induced crystallization occurred during the later stage of degradation, contributing to an appreciable decrease in the long period and lamellar thickness of both PGA and P(GA-co-LA) samples. The introduction of LA units into the PGA skeleton reduced the difference in the degradation rate between the crystalline and amorphous regions, and they were simultaneously degraded in the early stage of degradation, leading to a degradation mechanism different from that of the PGA fiber.

Quantifying Nanoparticle Ordering Induced by Polymer Crystallization

It has recently been established that polymer crystallization can preferentially place nanoparticles (NPs) into the amorphous domains of a lamellar semicrystalline morphology. The phenomenology of this process is clear: when the time for NP diffusion is shorter than the crystal growth time, then the NPs are rejected by the growing crystals and placed in the amorphous domains. However, since there is no quantitative characterization of this ordered NP state, we develop a correlation function analysis for small-angle X-ray scattering data, inspired by classical methods used for enunciating the local morphology of lamellar semicrystalline polymers. We show that when the spherulitic growth rate is slower than NP diffusion, then all the NPs are expelled from the crystals. As we increase the crystallization temperature, T_c, the long period characterizing the periodically repeating crystal-amorphous polymer structure, r_cc, increases. This results in a smaller number of amorphous domains per unit volume-the number of NPs per amorphous domain thus increases. While the scattering contrast between the pure silica and the polymer is constant, these arguments predict that the apparent contrast between the NP-rich and the polymer-rich domains scale linearly with r_cc, as we confirm from our experiments. These facts allow us to posit that the NPs become more efficiently packed in the interlamellar zone with increasing T_c until they form a fully filled monolayer. Above this temperature, NP multilayers form within each of the NP-rich domains. Our analysis approach, therefore, describes NP ordering that is achieved when driven by polymer crystallization.

Investigation on the α/δ Crystal Transition of Poly(l-lactic Acid) with Different Molecular Weights

Poly(l-lactic acid) (PLLA) crystal possesses a complex polymorphism, and the formation mechanism of various crystal forms has been a hot research topic in the field of polymer condensate matter. In this research, five kinds of PLLA with different molecular weights were prepared by ring-opening polymerization with strict dehydration operations and multistep purification treatments. Then, thin film isothermal crystallization experiments were carried out to obtain crystallized samples. Previous research has proven that the PLLA α crystal form is usually formed at a temperature above 120 °C and the PLLA δ (or α') crystal form is usually formed at a temperature below 120 °C. However, in this research, the characterization results indicated that the PLLA crystal changed from δ form to α form with the decrease of molecular weight at a temperature of 80 °C. Considering the molecular weight effect, the paper argued that the transitions of the α/δ crystal form are not only associated with temperature, but also related to entanglement state before crystallization. The small-angle X-ray scattering of the PLLA crystal and rheology analysis of the PLLA melt before crystallization further proved the significant role of entanglement. Finally, we tentatively proposed the entanglement effect mechanism on the transitions of the α/δ crystal form.