Changes in the volatile profile, fatty acid composition and other markers of lipid oxidation of six different vegetable oils during short-term deep-frying

Comprehensive multiomics analysis reveals the effects of French fries and chicken breast meat on the oxidative degradation of lipids in soybean oil during deep-frying

This study investigated the oxidative degradation of lipids in soybean oil used for frying French fries (SOFFF) and chicken breast meat (SOFCBM) using integrated volatolomics and oxidative lipidomics. Water in the food matrix promotes triglyceride hydrolysis. The rate of lipid hydrolysis was higher in SOFCBM, whereas the rate of lipid oxidation was higher in SOFFF. Prolonged frying with SOFFF may be more harmful to health because of the toxic oxidized triglycerides. Nitrogenous volatile derivatives are characteristic of SOFCBM. The volatile derivatives produced by SOFFF were similar to those produced by thermal processing. Ten non-volatile derivatives were identified as potential markers related to the total polar compound content, and 17 non-volatile derivatives were identified as potential markers related to deep-frying time in both SOFFF and SOFCBM. These results provide a comprehensive insight into the effects of fried foods on the oxidative degradation of lipids.

Analyzing the Effect of Dried Shrimp on the Flavor of Sheep Bone Soup Through Sensory Evaluation Combined with Untargeted Approaches

Dried shrimp is a popular dietary ingredient that is often included in appetizer soups, stir-fry dishes, or other stews to improve the umami taste. The effects of adding dried shrimp on the sensory characteristics and taste components of sheep bone soup were investigated through sensory evaluation and untargeted approaches. The results of the single-factor and orthogonal experiments showed that the flavor qualities of sheep bone soup were optimal under the following conditions: 30% dried shrimp added, a 1:4.5 material-water ratio, and 2.7 h of stewing time. Sensory analysis showed a significant increase in the aroma, umami, kokumi, and texture intensity of the optimized sheep bone soup with dried shrimp. The untargeted approach combined with multivariate statistical analysis showed that compounds with a sweet taste (Lys and Ser), a umami taste and umami enhancement (Ala-Leu, Glu-Pro, Glu-Glu, Asp-Phe, pyroglutamic acid, and cinnamic acid), a bitter taste (Gly-Leu, Leu-Leu, Ile-Lys, and taurine), a kokumi taste (γ-Glu-Met, γ-Glu-Leu, γ-Glu-Ile, N-acetylmethionine, and N-acetylphenylalanine), a sour taste (malic acid), and a popcorn-like aroma (2-acetylthiazole) contributed significantly to the flavor enhancement of sheep bone soup. In addition, the contribution of Ac-Ser-Asp-Lys-Pro could not be ignored. These results contribute to a better understanding and improvement of the flavor qualities of sheep bone soup.

Temperature-Based Extraction, Characterization by Gas Chromatography-Mass Spectrometry and Fourier Transform Infrared Spectroscopy With Prospective Antibacterial Properties of Eri (Philosamia ricini) Pupal Oil

Lepidopteran insects are novel source of omega-3 fatty acids as revealed by the studies recently. In the current study, we assessed the effects of four different drying temperatures (50, 60, 70 and 80°C) of eri silkworm (Philosamia ricini) pupal oil (EPO) abbreviated as EPO50, 60, 70 and 80 followed by conducting the characterization and antibacterial efficacy studies. Gas chromatography-mass spectroscopy (GC-MS) and Fourier transform infrared (FTIR) were used for chemical profiling of EPOs. The agar-well diffusion method was performed to evaluate the antibacterial activities. The trend of this study clearly revealed that enhanced drying percentage of temperatures showed raising saturated fats and reduced unsaturated fats. However, the best suitable temperature was found at 60°C with high unsaturated fatty acids, including omega-3. Further, at higher temperature, FTIR analysis revealed an increasing complexity of functional groups with potential bioactive compounds. EPOs were found to have significant antibacterial activity against Salmonella typhi and Staphylococcus aureus at all tested (10, 20, 30 and 40 µL) volumes used in the study.

Impact of Oil Temperature and Splashing Frequency on Chili Oil Flavor: Volatilomics and Lipidomics

In this study, headspace gas chromatography-ion mobility spectrometry, headspace gas chromatography-mass spectrometry, and lipidomics were used to explore the effects of three oil temperatures (210 °C, 180 °C, 150 °C) with single- and traditional triple-oil-splashing processes (210 °C → 180 °C → 150 °C) on the formation of key chili oil aromas. A total of 31 key aroma compounds were identified, with 2,4-nonadienal, α-pinene, α-phellandrene, and β-ocimene being found in all treatment groups. Lipidomics suggested that oleic acid, linoleic acid, and α-linolenic acid were highly positively correlated with key chili oil key aroma compounds, such as (E)-2-heptenal, 2-methylbutyraldehyde, limonene, (E, E)-2,4-heptadienal, 2,4-nonadienal, and 2,4-decadienal. The temperature and frequency of oil splashing significantly affected the chili oil aroma profile (p < 0.05). The citrus, woody, and grassy notes were richer in chili oil prepared at 150 °C, malty and fatty aromas were more prominent at 180 °C, and the nutty aroma was stronger in 210 °C prepared and triple-splashed chili oil. The present study reveals how sequential oil splashing processes synergistically activate distinct lipid degradation pathways compared to single-temperature treatments, providing new insights into lipid-rich condiment preparation, enabling chefs and food manufacturers to target specific aroma profiles.

Comparative study of volatile compounds of cold-pressed oils extracted from three different oilseeds after gamma irradiation

To investigate the effect of gamma irradiation on the volatile compounds of edible oils. Three types of oilseeds, including peanut, sesame, and flaxseed, were subjected to 8 kGy gamma irradiation, followed by cold pressing to extract their oils. The volatile compounds of the oils were isolated by simultaneous distillation extraction and analyzed by gas chromatography-mass spectrometry. A total of 91 volatile compounds were identified, which can be grouped into eight categories: hydrocarbons, aldehydes, ketones, alcohols, acids, esters, furans, and benzene derivatives. Irradiation treatment resulted in a significant increase in the levels of hydrocarbons, aldehydes, and ketones in all oil samples (p < 0.05), with the greatest increase observed in hydrocarbons (4-14 times). In contrast, changes in alcohols, acids, esters, furans, and benzene derivatives were related to oilseed type. The increased hydrocarbons mainly originated from the degradation of palmitic, stearic, oleic, and linoleic acids. The irradiation resistance of the three oilseeds varied considerably, in the order: flaxseed > sesame > peanut. Based on the odor activity value, 11 key aroma compounds were selected, and (E)-2-decenal (tallow, oily, and orange), 1-octanol (soapy and oily), and 1-nonanol (floral and soapy) were only detected in the irradiated samples. Principal component analysis revealed that the oil samples of the three oilseeds could be well classified based on their key aroma compounds, and that the irradiation treatment had no remarkable effect on their intrinsic aroma.

Phytochemical characterization and nutritional value of vegetable oils from ripe berries of Schinus terebinthifolia raddi and Schinus molle L., through extraction methods

The aims of this study are the phytochemical exploration and food valorization of Schinus molle L. (S. molle) and Schinus terebinthifolia Raddi (S. terebinthifolia) from the Rabat, Morocco. Gas chromatography (GC) and high-performance liquid chromatography (HPLC) were used to analyze the chemical composition of the oils extracted from both species by soxhlet and maceration. Moreover, physicochemical characteristics such as lipid quality indexes such as thrombogenic index (TI), atherogenic index (AI), oxidation susceptibility (OS), and calculated oxidability (Cox) were determined. These characteristics included percentage acidity, peroxide, saponification, iodine, specific extinction values, chlorophyll, and carotenoid pigments. As results, the oil yields varied from 7% (S. molle) to 13% (S. terebinthifolia). In addition, unsaturated fatty acids represented the major fraction for S. terebinthifolia (79%) and S. molle (81%). However, S. terebinthifolia contains more saturated fatty acids (20%) than S. molle (16%) with a predominance of linoleic acid (59.53% and 55%, C18,2), oleic acid (19.29% and 21.69%, C18,1), and palmitic acid (12.56% and 15.48%, C16,0) in S. molle and S. terebinthifolia, respectively. Moreover, the main sterols are β-sitosterol followed by campesterol and then Δ-5-avenasterol, while β-sitosterol varies according to the species and the extraction method. Results revealed also that campesterol is influenced by the extraction results in a content of 179.66 mg/kg (soxhlet) and 63.48 mg/kg (maceration) for S. molle, while S. terebinthifolia yeilds concentrations of 170 mg/kg and 138 mg/kg, then Δ-5-avenasterol, which present with (117 mg/kg and 136 mg/kg), (34 mg/kg and 80 mg/kg) of the total amount of sterols for the oils extracted by soxhlet and maceration, respectively. In addition, there are favorable physicochemical properties for all oils, such as chlorophylls (0.4 to 0.8 mg/kg) and carotenoids (0.7 to 2 mg/kg). However, further investigations are needed to determine other chemical compounds of both extracts as well as to evaluate their biological and health benefits.

Effects of Steaming on Chemical Composition of Different Varieties of Purple-Fleshed Sweetpotato

Purple-fleshed sweetpotatoes (PFSPs) are rich in anthocyanins and are one of the health foods of interest. In this study, the effects of steaming on the anthocyanin, starch, soluble sugar, volatile organic compounds (VOCs) and pasting properties of nine PFSPs from China were investigated. The anthocyanin content of raw PFSP ranged from 9 to 185 mg/100 g. The total starch content decreased and soluble sugar content increased in all purple potatoes after steaming. Among the nine PFSPs varieties, Guangshu20 showed the greatest decrease in starch content (30.61%) and the greatest increase in soluble sugar content (31.12%). The pasting properties affected the taste of the PFSPs, with Shuangpihuang having the lowest peak viscosity (720.33 cP) and Guangzishu12 having the highest peak viscosity (2501.67 cP). Correlation studies showed that the anthocyanin content and pasting properties were negatively correlated with most of the sensory indicators, whereas the soluble sugar content of steamed PFSPs was significantly positively correlated with sweetness. A total of 54 VOCs were identified in this study, and aldehydes and terpenoids were the major VOCs in PFSPs. This study provides a theoretical basis for the processing of different PFSP varieties.

Investigating the Thermal Stability of Omega Fatty Acid-Enriched Vegetable Oils

This study investigates the thermal stability of omega fatty acid-enriched vegetable oils, focusing on their behavior under high-temperature conditions commonly encountered during frying. This research aims to evaluate changes in fatty acid composition, particularly the degradation of essential omega-3, -6, and -9 fatty acids, and the formation of harmful compounds such as trans fatty acids (TFAs). Various commercially available vegetable oils labeled as containing omega-3, omega-6, and omega-9, including refined sunflower, high-oleic sunflower, rapeseed, and blends, were analyzed under temperatures from 180 °C to 230 °C for varying durations. The fatty acid profiles were determined using gas chromatography-mass spectrometry (GC-MS). The results indicated a significant degradation of polyunsaturated fatty acids (PUFAs) and an increase in saturated fatty acids (SFAs) and TFAs with prolonged heating. The findings highlight the varying degrees of thermal stability among different oils, with high-oleic sunflower and blended oils exhibiting greater resistance to thermal degradation compared to conventional sunflower oils. This study underscores the importance of selecting oils with favorable fatty acid compositions for high-temperature cooking to minimize adverse health effects associated with degraded oil consumption. Furthermore, it provides insights into optimizing oil blends to enhance thermal stability and maintain nutritional quality, crucial for consumer health and food industry practices.

The Effect of High-Temperature Heating on Amounts of Bioactive Compounds and Antiradical Properties of Refined Rapeseed Oil Blended with Rapeseed, Coriander and Apricot Cold-Pressed Oils

Cold-pressed oils are rich sources of bioactive substances, which may protect triacylglycerols from degradation during frying. Nevertheless, these substances may decompose under high temperature. This work considers the content of bioactive substances in blends and their changes during high-temperature heating. Blends of refined rapeseed oil with 5% or 25% in one of three cold-pressed oils (rapeseed, coriander and apricot) were heated at 170 or 200 °C in a thin layer on a pan. All non-heated blends and cold-pressed oils were tested for fatty acid profile, content and composition of phytosterols, tocochromanols, chlorophyll and radical scavenging activity (RSA) analyzed by 2,2-diphenyl-1-picrylhydrazyl (DPPH), and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) assays. Moreover, the stability of phytosterols, tocochromanols, DPPH and ABTS values was determined in heated blends. All tocochromanols were lost during the heating process, in particular, at 200 °C. However, there were some differences between homologues. α-Tocopherol and δ-tocopherol were the most thermolabile and the most stable, respectively. Phytosterols were characterized by very high stability at both temperatures. We observed relationships between ABTS and DPPH values and contents of total tocochromanols and α-tocopherol. The obtained results may be useful in designing a new type of fried food with improved health properties and it may be the basis for further research on this topic.

Microencapsulation of peanut skin polyphenols for shelf life improvement of sunflower seeds

Derived from industrial processing waste, peanut skins contain polyphenols that delay oxidative food spoilage. However, these compounds are susceptible to light, heat, and oxygen exposure. Microencapsulation provides a solution by offering protection from these factors. The aim of this study was to evaluate the protective effect of peanut skin extract microcapsules on the chemical, microbiological, and sensory property and shelf life of sunflower seeds during storage. Five roasted sunflower seed samples were prepared: control (S-C); added with butylhydroxytoluene (S-BHT); coated with carboxymethyl cellulose (S-CMC); coated with CMC and the addition of peanut skin crude extract (S-CMC-CE); coated with CMC and the addition of microcapsules (S-CMC-M20). Sensory acceptability was determined using hedonic testing. Chemical (peroxide value, conjugated dienes, hexanal and nonanal content, and fatty acid profile), microbiological, and descriptive analyses were carried out on samples stored for 45 days at room temperature. Shelf life was calculated using a simple linear regression. All samples were microbiologically fit for human consumption and accepted by consumer panelists, scoring above five points on the nine-point hedonic scale. S-CMC-M20 exhibited the lowest peroxide value (6.59 meqO2/kg) and hexanal content (0.4 µg/g) at the end of the storage. Estimated shelf life showed that S-MC-M20 (76.3 days) extended its duration nearly ninefold compared to S-C (8.3 days) and doubled that of S-CMC-CE (37.5 days). This indicates a superior efficacy of microencapsulated extract compared to its unencapsulated form, presenting a promising natural strategy for improving the shelf life of analogous food items. PRACTICAL APPLICATION: Incorporating peanut skin extract microcapsules in coating sunflower seeds presents a promising strategy to extend the shelf life of lipid-rich foods, capitalizing on the antioxidant properties of polyphenols. This innovative approach not only enhances nutritional quality but also addresses sustainability concerns by repurposing agro-industrial byproducts, such as peanut skins. By meeting consumer demand for functional foods with added health benefits, this technique offers potential opportunities for the development of novel, value-added food products while contributing to circular economy principles and waste management efforts.

Characterization and classification of oleogels and edible oil using vibrational spectroscopy in tandem with one-class and multiclass chemometric methods

Oleogel represents a promising healthier alternative to act as a substitute for conventional fat in various food products. Oil selection is a crucial factor in determining the technological properties and applications of oleogels due to their distinct fatty acid composition, molecular weight, and thermal properties, as well as the presence of antioxidants and oxidative stability. Hence, the relevance of monitoring oleogel properties by non-destructive, eco-friendly, portable, fast, and effective techniques is a relevant task and constitutes an advance in the evaluation of oleogels quality. Thus, the present study aims to classify oleogels rapidly and reliably, without the use of chemicals, comparing two handheld near infrared (NIR) spectrometers and one portable Raman device. Furthermore, two different multivariate methods are compared for oleogel classification according to oil type. Three types of oleogels were prepared, containing 95 % oil (sunflower, soy, olive) and 5 % beeswax as a structuring agent, melted at 90 °C. Polarized light microscopy (PLM) images were acquired, and fatty acid composition, peroxide index and free fatty acid content were determined using official methods. A total of 240 oleogel and 92 oil spectra were obtained for each instrument. After spectra pretreatment, Principal Component Analysis (PCA) was performed, and two classification methods were investigated. The Data Driven - Soft Independent Modelling of Class Analogy (DD-SIMCA) and Partial Least Squares Discriminant Analysis (PLS-DA) models demonstrated 95 % to 100 % of accuracy for the external test set. In conclusion, the use of vibrational spectroscopy using handheld and portable instruments in tandem with chemometrics showed to be an efficient alternative for classifying oils and oleogels and could be extended to other food samples. Although the classification of vegetable oils by NIR is widely used and known, this work proposes the classification of different types of oil in oleogel matrices, which has not yet been explored in the literature.

Lipid concomitant γ-oryzanol decreased oil absorbency of French fries by changing the microstructure of French fries and physical properties of frying oil

BACKGROUND

The aim of this research was to evaluate the possibility of lipid concomitant γ-oryzanol reducing oil absorbency of fried foods and the underlying mechanism. Therefore, the influence of γ-oryzanol on moisture and oil content, and distribution and micromorphology of French fries and the viscosity, fatty acid composition and total polar compounds content of rice bran oil (RBO) after frying were studied.

RESULTS

Our results showed that the incorporation of low concentration of γ-oryzanol [low addition group (LAG)] (5.754 g/kg) decreased the oil absorbency and porous structure of French fries during frying. Additionally, LAG incorporation inhibited the degradation of linoleic acid, decreased the growth rate of saturated fatty acids, total polar compounds and viscosity of frying oil.

CONCLUSIONS

Consequently, it was recommended to incorporate a small amount of γ-oryzanol in frying oil because it could inhibit oil absorption behavior of French fries. © 2023 Society of Chemical Industry.

Study by means of 1H nuclear magnetic resonance of the oxidation process in high oleic sunflower oil and palm oil during deep-frying of fish cakes

This study aimed to compare the frying performance of palm oil (PO) and high oleic sunflower oil (HOSO) during frying aquatic products. The quality change and frying performance of HOSO and PO during frying of fish cakes were investigated. The oxidation and hydrolysis products of both oils were explored by the nuclear magnetic resonance technique. The results showed that the color deepening rate of PO was higher than that of HOSO. After 18 h of frying, the total polar compound content of PO and HOSO reached 25.67% and 27.50%, respectively. HOSO had lower degree of oxidation than PO after 24 h of continuous frying. The polyunsaturated fatty acid content in HOSO and PO significantly decreased. The oleic acid content in HOSO remained above 80% during the frying process. The major aldehydes in both oils were (E, E)-2,4-alkadienals and n-alkanals and glycerol diesters (DAGs) were abundant in PO. Furthermore, the addition of fish cakes had slight effect on the quality of the frying oil. Therefore, HOSO is an appropriate candidate for frying owing to its excellent frying stability and nutritional value.

Encapsulation efficiency and fatty acid analysis of chia seed oil microencapsulated by freeze-drying using combinations of wall material

Chia seed oil (CSO) was encapsulated using whey protein concentrate (WPC) and modified tapioca starch (MTS) through freeze-drying. A central composite design was used to evaluate the effect of independent variables (MTS:WPC ratio, homogenization pressure, and oil content). Encapsulation efficiency (EE) and α-linolenic acid content (ALA) were evaluated for all runs. The results showed that higher MTS ratios led to maximum ALA retention, while higher WPC ratios led to maximum EE. The optimized conditions resulted in high EE (97 %), ALA content (59.54 %), and a Ω-3:Ω-6 ratio (3.34). The fatty acid composition, oxidative and thermal stability showed that the MTS:WPC ratio of 25:75 was the best combination for encapsulating CSO. The encapsulated CSO with a balanced Ω-3:Ω-6 ratio can be used as a functional ingredient in foods for health benefits.

Improving the flavor of tilapia fish head soup by adding lipid oxidation products and cysteine

Deodorization and umami enhancement are important challenges in promoting and consuming fish products. The aim of this study was to establish whether exogenous addition of oxidized lipids and cysteine can improve the fishy, umami and create a characteristic flavor in tilapia fish head soup. The results revealed that adding oxidized lipids and cysteine enhanced the sensory attributes of fish head soup and promoted the production of pleasant-tasting amino acids and fewer bitter amino acids in the Maillard reaction. Additionally, the combination increased the levels of well-flavored aldehydes, esters, heterocyclic compounds and less hydrocarbons in the fish head soup. Among the 13 volatile compounds screened, nine were identified as characteristic aromas of fish head soup, including nonanal, (E,E)-2,4-decadienal, 1-octen-3-ol, (E)-2-decenal, acetic acid, hexanal, heptanal, 2-octenal, and decanal. Exogenous lipid oxidation products, fatty acid oxidation, and Maillard reaction can improve the aroma and umami of tilapia fish head soup.

Improving the functionality of virgin and cold-pressed edible vegetable oils: Oxidative stability, sensory acceptability and safety challenges

In recent years, there has been a growing demand for minimally processed foods that offer health benefits and premium sensory characteristics. This trend has led to increased consumption of virgin (VOs) and cold-pressed (CPOs) oils, which are rich sources of bioactive substances. To meet consumer needs for new oil products conferring multi-functional properties over a longer storage period, the scientific community has been revisiting traditional enrichment practices while exploring novel fortification technologies. In the last four years, the interest has been growing faster; an ascending number of annually published studies are about the addition of different plant materials, agri-food by-products, or wastes (intact or extracts) to VOs and CPOs using traditional or innovative fortification processes. Considering this trend, the present review aims to provide an overview and summarize the key findings from relevant papers that were retrieved from extensively searched databases. Our meta-analysis focuses on exposing the most recent trends regarding the exploitation of VOs and CPOs as substrates, the fortification agents and their form of use, as well as the fortification technologies employed. The review critically discusses possible health claim and labeling issues and highlights some chemical and microbial safety concerns along with authenticity issues and gaps in quality specifications that manufacturers have yet to address. All these aspects are examined from the perspective of developing new oil products with well-balanced techno-, senso- and bio-functional characteristics.

Cashew By-Product as a Functional Substrate for the Development of Probiotic Fermented Milk

Cashew (Anacardium occidentale) processing generates a by-product (CB) with potential for health benefits and that could be a favorable ingredient to be added to a probiotic food matrix. This study aimed to assess the functional attributes of CB in fermented milk with a probiotic and a starter culture using in vitro gastrointestinal conditions. Two formulations were tested, without CB (Control Formulation-CF) and with CB (Test Formulation-TF), and the two strains most adapted to CB, the probiotic Lacticaseibacillus paracasei subsp. paracasei F19® and the starter Streptococcus thermophilus ST-M6®, were chosen to be fermented in the CF and the TF. During a 28-day period of refrigeration (4 °C), both strains used in the CF and TF maintained a population above 8.0 log CFU/mL. Strains cultured in the TF had a significant increase in total phenolic compounds and greater antioxidant potential during their shelf life, along with improved survival of F19® after in vitro-simulated gastrointestinal conditions. Our study revealed the promising potential of CB in the probiotic beverage. The CB-containing formulation (TF) also exhibited higher phenolic content and antioxidant activity. Furthermore, it acted as a protector for bacteria during gastrointestinal simulation, highlighting its potential as a healthy and sustainable product.

Effects of Endogenous Anti-Oxidative Components from Different Vegetable Oils on Their Oxidative Stability

The effects of endogenous anti-oxidative components of ten common edible vegetable oils (palm olein, corn oil, rapeseed oil, soybean oil, perilla seed oil, high oleic sunflower oil, peanut oil, camellia oil, linseed oil, and sesame oil) on oxidation were explored in this research. The oxidation processes and patterns of the oils were investigated with the Schaal oven test using fatty acids and the oxidative stability index, acid value, peroxide value, p-anisidine value, total oxidation value, and content of major endogenous anti-oxidative components as indicators. The major endogenous anti-oxidative components in vegetable oils were tocopherols, sterols, polyphenols, and squalene, among which α-tocopherol, β-sitosterol, and polyphenols showed good anti-oxidative activity. However, squalene and polyphenols were relatively low and showed limited anti-oxidative effects. Moreover, the oxidative stability index of edible vegetable oils oxidized at high temperature (120 °C) was positively correlated with the content of saturated fatty acids (r = 0.659) and negatively correlated with the content of polyunsaturated fatty acids (r = -0.634) and calculated oxidizability (r = -0.696). When oxidized at a low temperature (62 °C), oxidative stability was influenced by a combination of fatty acid composition as well as endogenous anti-oxidative components. An improved TOPSIS based on Mahalanobis distance was used to evaluate the oxidative stability of different types of vegetable oils. Moreover, the oxidative stability of corn oil was better than the other vegetable oils, while perilla seed oil was very weak.

Oxidative Stability and Genotoxic Activity of Vegetable Oils Subjected to Accelerated Oxidation and Cooking Conditions

The oxidative stability and genotoxicity of coconut, rapeseed and grape seed oils were evaluated. Samples were submitted to different treatments: 10 days at 65 °C, 20 days at 65 °C (accelerated storage) and 90 min at 180 °C. Peroxide values and thiobarbituric acid reactive substances values were altered as a function of storage time, but their greatest changes were recorded in samples subjected to 180 °C. Fatty acid profiles did not show significant changes from the nutritional point of view. Volatile compounds showed the highest increases at 180 °C for 90 min (18, 30 and 35 fold the amount in unheated samples in rapeseed, grape seed and coconut oils, respectively), particularly due to the increment in aldehydes. This family accounted for 60, 82 and 90% of the total area in coconut, rapeseed and grapeseed oil, respectively, with cooking. Mutagenicity was not detected in any case in a miniaturized version of the Ames test using TA97a and TA98 Salmonella typhimurium strains. Despite the increment in the presence of lipid oxidation compounds in the three oils, they were not compromised from the safety perspective.

A versatile method to fingerprint and compare the oxidative behaviour of lipids beyond their oxidative stability

In this work we propose the use of isothermal thermogravimetry to evaluate the oxidative stability of a lipid and to evaluate how the glyceride composition affects the entire oxidative process, to quantify the oxidation undertaken by the lipid, and numerically compare the oxidative behaviour of different lipids. The innovative aspect of the present method lies in the acquisition of a prolonged "oxygen uptake" curve (4000-10,000 min) of a lipid under oxygen and in the development of a semi-empirical fitting equation for the experimental data. This provides the induction period (oxidative stability), and allows to evaluate the rate of oxidation, the rate and the magnitude of oxidative degradation, the overall mass loss and the mass of oxygen taken by the lipid upon time. The proposed approach is used to characterize the oxidation of different edible oils with different degrees of unsaturation (linseed oil, sunflower oil, and olive oil) as well as chemically simpler compounds used in the literature to model the autoxidation of vegetable oils and lipids in general: triglycerides (glyceryl trilinolenate, glyceryl trilinoleate and glyceryl trioleate) and methyl esters (methyl linoleate and methyl linolenate). The approach proves very robust and very sensitive to changes in the sample composition.

Effect of Frying Process on the Flavor Variations of Allium Plants

The Allium plant is widely used in cuisines around the world for its characteristic flavor. The general profile of the plant changes a lot and presents quite different smells after the frying process. In this work, five Allium plants and their fried oils were compared to find out how the frying process impacts the general flavor profile. The results of sensory analysis indicated that the frying process could substantially increase the flavor acceptability of fresh Allium plants. Meanwhile, according to gas chromatography-mass spectrometry (GC-MS) analysis, fewer volatile compounds were detected in fresh Allium plants than in their fried oils. Furthermore, contents of nitrogen-containing compounds (ranging from 0.17 μg/g to 268.97 μg/g), aldehydes (ranging from 71.82 μg/g to 1164.84 μg/g), and lactones (ranging from 0 μg/g to 12.38 μg/g) increased significantly. In addition, more aroma-active substances were identified in the fried Allium oils revealed by gas chromatography-olfactometry (GC-O) analysis. Sulfur-containing compounds were the most abundant in fresh Allium plants, whereas nitrogen-containing compounds dominated in fried oils. The thermal degradation of sugars, amino acids and lipids as well as interactions between carbohydrates, proteins, and fats during the frying process were thought to be the main contributors to these variations. Therefore, this research provides a theoretical basis for the quality control of onion oil flavor and promotes the further development of the onion plant industry. Consequently, the research provided a theoretical basis for the quality control of Allium oils' flavor and promoted the further development of Allium plant industries.

Influence of cooking techniques on food quality, digestibility, and health risks regarding lipid oxidation

Foods undergo various physical and chemical reactions during cooking. Boiling, steaming, baking, smoking and frying are common traditional cooking techniques. At present, new cooking technologies including ultrasonic-assisted cooking, vacuum low-temperature cooking, vacuum frying, microwave heating, infrared heating, ohmic heating and air frying are widely studied and used. In cooking, lipid oxidation is the main reason for the change in lipid quality. Oxidative decomposition, triglyceride monomer oxidation, hydrolysis, isomerization, cyclization reaction and polymerization occurred in lipid oxidation affect lipids' quality, flavor, digestibility and safety. Meanwhile, lipid oxidation in cooking might cause the decline of lipid digestibility and increase of health risks. Compared with the traditional cooking technology, the new cooking technology that is milder, more uniform and faster can reduce the loss of lipid nutrition and produce a better flavor. In the future, the combination of various cooking technologies is an effective strategy for families to obtain healthier food.

Monitoring the oxidation process of soybean oil during deep-frying of fish cakes with 1H nuclear magnetic resonance

The oxidation process of soybean oil (SBO) during frying fish cakes was investigated. The TOTOX value of before frying (BF) and after frying (AF) was significantly higher than control (CK). However, the total polar compound (TPC) content of AF reached 27.67% in frying oil continuously frying at 180℃ for 18 h, and 26.17% for CK. 2,2-Diphenyl-1-picrylhydrazyl (DPPH) loss in isooctane and methanol significantly decreased with the extension of frying time and then tended to be stable. The decrease of DPPH loss was related to the increase of TPC content. Antioxidant and prooxidant balance (APB) value below 0.5 was obtained after 12 h for heated oil. (E)-2-alkenals, (E, E)-2,4-alkadienals, and n-alkanals were dominant ingredients among the secondary oxidation products. Traces of monoglycerides (MAG) and diglycerides (DAG) were also detected. These results may improve our understanding of the oxidation deterioration in SBO during frying.

Approach to evaluate the sensory quality deterioration of chicken seasoning using characteristic oxidation indicators

Sensory quality deterioration of chicken seasoning was investigated using physicochemical properties, gas chromatography-mass spectrometry (GC-MS) and descriptive sensory analysis to approach an evaluation of the chicken seasoning deterioration. It was found that both peroxide value (POV) and total oxidation value (TOTOX) increased with the chicken seasoning deterioration, suggesting a dominant of the lipid oxidation in the sensory quality deterioration of chicken seasoning. Moreover, a continuously decreasing linoleic acid and contradictory increasing in volatile aldehydes (specifically for hexanal) indicated as characteristic oxidation indicators to evaluate the sensory quality deterioration. PLSR results further elucidated that the evolution of aldehydes was highly correlated with sensory quality deterioration. These results suggest the POV, TOTOX and hexanal as valuable indicators and provide a novel approach to quality and rapidly evaluate the sensory quality deterioration of chicken seasoning.

Quality Change in Camellia Oil during Intermittent Frying

Camellia oil with a high oleic acid content is widely used for frying. To comprehensively describe the quality change in camellia oil during frying, the changes in composition, deterioration indicators, and volatile profiles were investigated. The results showed that tocopherols mainly degraded in the early stage of frying, followed by unsaturated fatty acids (UFA). This caused the carbonyl value and total polar compounds level to significantly increase. Moreover, frying promoted the accumulation of volatile compounds in terms of type and abundance, especially aldehydes, which are related to the degradation of UFA. Principal component analysis showed that the frying of camellia oil was divided into three stages. First, the camellia oil with a heating time of 2.5-7.5 h showed excellent quality, where tocopherol played a major role in preventing the loss of UFA and was in the degradation acceleration stage. Subsequently, as tocopherol entered the degradation deceleration stage, the quality of camellia oil heated for 10.0-15.0 h presented a transition from good to deteriorated. Finally, tocopherol entered the degradation stagnation stage, and the quality of camellia oil heated for 17.5-25.0 h gradually deteriorated, accompanied by a high level of volatile compounds and deterioration indicators. Overall, this work comprehensively determined the deterioration of camellia oil during intermittent frying and offered valuable insights for its quality evaluation.

Enhanced waste hot-pot oil (WHPO) anaerobic digestion for biomethane production: Mechanism and dynamics of fatty acids conversion

Resource depletion and climate changes due to human activities and excessive burning of fossil fuels are the driving forces to explore alternatives clean energy resources. Anaerobic digestion of bio-waste provides a unique opportunity to fulfil this objective through biogas production. The present study aimed to evaluate waste hot-pot oil (WHPO) at different feeding ratios as a novel lipidic waste for anaerobic mono-digestion. The highest recorded maximum biomethane potential (M_max) was 274.1 L kg^-1 VS at 1.2% WHPO, which showed significant differences with those of 0.8% and 1.6% (227.09 and 237.62 L kg^-1 VS, respectively). The changes in volatile fatty acids (VFAs), medium chain fatty acids (MCFAs), and long-chain fatty acids (LCFAs) as intermediates of WHPO decomposition were investigated before and after anaerobic digestion. Results showed efficient production and utilization of VFAs at all studied WHPO ratios, whereas the maximum utilization of VFAs (90-95%) was recorded in the reactors with up to 1.2 %WHPO. Although lipid conversion efficiency decreased by increasing the WHPO ratio, 81.2% lipid conversion efficiency was recorded at the highest applied WHPO treatment, which confirms the potential of WHPO as a promising feedstock for anaerobic digestion. The present results will have major implications towards efficient energy recovery and biochemical management of lipidic-waste through efficient anaerobic digestion.

Changes in Chemical Composition of Flaxseed Oil during Thermal-Induced Oxidation and Resultant Effect on DSC Thermal Properties

To investigate the changes in chemical composition of flaxseed oil during thermal-induced oxidation and the resultant effect on thermal properties, samples with different oxidation levels were obtained by being heated at 180 °C for two hours and four hours. The oxidation degree was evaluated using peroxide value (PV), extinction coefficient at 232 nm and 268 nm (K232 and K268), and total polar compounds (TPC). Using chromatography, the fatty acid profile and triacylglycerol (TAG) profile were examined. Differential scanning calorimetry (DSC) was used to determine the crystallization and melting profiles. Thermal-induced oxidation of flaxseed oil led to a significant increase (p < 0.05) in PV, K232, K268, and TPC, but the relative content of linolenic acid (Ln) and LnLnLn reduced dramatically (p < 0.05). TPC derived from lipid degradation affected both crystallization and melting profiles. Statistical correlations showed that the onset temperature (Ton) of the crystallization curve was highly correlated with K232, TPC, and the relative content of LnLnLn (p < 0.05), whereas the offset temperature (Toff) of the melting curve was highly correlated with the relative content of most fatty acids (p < 0.05). This finding provides a new way of rapid evaluation of oxidation level and changes of chemical composition for flaxseed oils using DSC.

Effects of Repeated Heating on Fatty Acid Composition of Plant-Based Cooking Oils

Several polyunsaturated fatty acids are considered to have beneficial health effects, while saturated fatty acids and industrial trans fatty acids (TFAs) are linked to negative health consequences. Given the increased formation of TFAs during heating, many studies already investigated compositional changes in oils after prolonged heating or at extremely high temperatures. In contrast, our aim was to measure changes in fatty acid composition and in some health-related indices in edible oils after short-time heating that resembles the conventional household use. Potatoes were fried in palm, rapeseed, soybean, sunflower and extra virgin olive oils at 180 °C for 5 min, and samples were collected from fresh oils and after 1, 5 and 10 consecutive heating sequences. Regardless of the type of oil, the highest linoleic acid and alpha-linolenic acid values were measured in the fresh samples, whereas significantly lower values were detected in almost all samples following the heating sequences. In contrast, the lowest levels of TFAs were detected in the fresh oils, while their values significantly increased in almost all samples during heating. Indices of atherogenicity and thrombogenicity were also significantly higher in these oils after heating. The present data indicate that prolonged or repeated heating of vegetable oils should be avoided; however, the type of oil has a greater effect on the changes of health-related indices than the number of heating sequences.

Emulsion Surimi Gel with Tunable Gel Properties and Improved Thermal Stability by Modulating Oil Types and Emulsification Degree

High resistance to heating treatments is a prerequisite for ready-to-eat (RTE) surimi products. In this study, emulsion-formulated surimi gels were prepared, and the effects of oil types and emulsification degrees on the thermal stability of surimi gel were investigated. The results showed the gel properties of surimi gels were modulated by oil types and emulsification degrees. In detail, the rising pre-emulsification ratio caused the increase of the emulsifying activity index (EAI) and decrease of emulsifying stability index (ESI) for both emulsions. The larger droplet sizes of perilla seed oil than soybean oil may be responsible for their emulsifying stability difference. The gel strength, water retention, dynamic modulus and texture properties of both kinds of surimi gels displayed a firstly increased and then decreased tendency with the rising pre-emulsification ratios. The peak values were obtained as perilla seed oil emulsion with emulsification ratio of 20% group (P1) and soybean oil emulsion with emulsification ratio of 40% group (S2), respectively. Anyway, all emulsion gels showed higher thermal stability than the control group regardless of oil types. Similar curves were also obtained for the changes of hydrogen bond, ionic bond and hydrophobic interactions. Overall, perilla seed oil emulsion with emulsification ratio of 20% (P1 group) contributed to the improved thermal stability of surimi gels.

Optimization of HS-SPME for GC-MS Analysis and Its Application in Characterization of Volatile Compounds in Sweet Potato

Volatile compounds are the main chemical species determining the characteristic aroma of food. A procedure based on headspace solid-phase microextraction (HP-SPME) coupled to gas chromatography-mass spectrometry (GC-MS) was developed to investigate the volatile compounds of sweet potato. The experimental conditions (fiber coating, incubation temperature and time, extraction time) were optimized for the extraction of volatile compounds from sweet potato. The samples incubated at 80 °C for 30 min and extracted at 80 °C by the fiber with a divinylbenzene/carboxen/polydimethylsiloxane (DVB/CAR/PDMS) coating for 30 min gave the most effective extraction of the analytes. The optimized method was applied to study the volatile profile of four sweet potato cultivars (Anna, Jieshu95-16, Ayamursaki, and Shuangzai) with different aroma. In total, 68 compounds were identified and the dominants were aldehydes, followed by alcohols, ketones, and terpenes. Significant differences were observed among the volatile profile of four cultivars. Furthermore, each cultivar was characterized by different compounds with typical flavor. The results substantiated that the optimized HS-SPME GC-MS method could provide an efficient and convenient approach to study the flavor characteristics of sweet potato. This is the basis for studying the key aroma-active compounds and selecting odor-rich accessions, which will help in the targeted improvement of sweet potato flavor in breeding.

Effect of New Frying Technology on Starchy Food Quality

Frying is commonly used by consumers, restaurants, and industries around the globe to cook and process foods. Compared to other food processing methods, frying has several potential advantages, including reduced processing times and the creation of foods with desirable sensory attributes. Frying is often used to prepare starchy foods. After ingestion, the starch and fat in these foods are hydrolyzed by enzymes in the human digestive tract, thereby providing an important source of energy (glucose and fatty acids) for the human body. Conversely, overconsumption of fried starchy foods can promote overweight, obesity, and other chronic diseases. Moreover, frying can generate toxic reaction products that can damage people's health. Consequently, there is interest in developing alternative frying technologies that reduce the levels of nutritionally undesirable components in fried foods, such as vacuum, microwave, air, and radiant frying methods. In this review, we focus on the principles and applications of these innovative frying technologies, and highlight their potential advantages and shortcomings. Further development of these technologies should lead to the creation of healthier fried foods that can help combat the rise in diet-related chronic diseases.

Influence of Oil Types and Prolonged Frying Time on the Volatile Compounds and Sensory Properties of French Fries

In order to study the flavor of French fries (FFs) prepared in different frying oils, we identified and compared the volatiles of FFs fried in high-oleic sunflower oil (HSO), sunflower oil (SO), linseed oil (LO), and palm oil (PO) during prolonged 24 h frying time. 47 different kinds of volatiles were presented, and aldehydes were the most abundant compounds. The FFs prepared in SO were rich in alkadienals, especially the (E, E)-2,4-decadienal, thus inducing the highest deep-fried odor. The content of alkenals was higher in FFs prepared in HSO, among which (E)-2-nonenal and 2-undecenal provided the undesirable oily flavor. Whereas, FFs prepared in PO were rich in alkanals, and showed an undesirable green aroma because of hexanal. Besides, the aldehydes in FFs fried in LO were the least with more undesirable flavor substances (e.g. (E, E)-2,4-heptadienal). In addition, except for the FFs fried in LO, the aldehydes in other FFs showed an increasing trend. While, the volatiles from the Maillard reaction (e.g. pyrazines) showed no clear pattern. Meanwhile, frying process had optimum frying window (approximately 12 h with total polar compounds content of 14.5%-22.2% in different oils), and the French fries prepared in this period obtained higher flavor score. Therefore, the comparison related to volatiles of FFs provided a basis for the flavor control to a certain extent.

Fortified Cold-Pressed Oils: The Effect on Sensory Quality and Functional Properties

The aim of this study was to monitor sensory quality, stability, selected nutritionally interesting properties and their changes in cold-pressed oil blends after fortification with chia and sesame seeds and seed oils during repeated thermal treatments. Rapeseed (cv. Sidney) and sunflower (cv. Velox) seeds from the Czech Republic were used to produce cold-pressed oils, which were fortified with chia and sesame seeds and seed oils in the concentrations of 1% and 5%. In all oil blends, sensory evaluation (quantitative descriptive analysis and hedonic analysis) and chemical analyses (oxidation degree, hydrolytic stability, chlorophyll and carotenoid content) were carried out in order to perform separation of samples degraded by thermal treatment. Assessors representing consumers were able to differentiate between individual thermal treatments from the viewpoint of pleasantness. Interestingly, the overall pleasantness of all fortified oil samples was still acceptable until the second thermal treatment. On the other hand, the results of the study emphasized the problematic oxidation degree of cold-pressed oil blends. The fortification of cold-pressed oils with chia and sesame seeds and oils did not unambiguously lead to better stability during thermal treatment. The application of elevated temperatures during the culinary use of these types of products should be limited to only one thermal treatment since sensory and chemical changes occur after repeated heating.

Effects of different frying temperatures on the aroma profiles of fried mountain pepper (Litsea cubeba (Lour.) Pers.) oils and characterization of their key odorants

Fried mountain pepper (Litsea cubeba (Lour.) Pers.) oil is widely used as a traditional spice flavoring oil in Chinese home cooking. To investigate the effects of different frying temperatures on the aroma of fried mountain pepper oil (FPO), four FPO samples were analyzed by descriptive sensory analysis (DSA), E-nose, gas chromatography-olfactometry/detection frequency analysis (GC-O/DFA) and odor activity value (OAV) calculation. DSA and E-nose results both indicated that significant differences existed among 4 FPOs, among which FPO3 showed superiority in several sensory attributes. 16 and 20 aroma-active compounds were screened by DFA and OAV, respectively. Thereafter, three aroma recombination models were performed, and results indicated the model solution derived from the combination of OAV and DFA was more closely resembled the FPO aroma. Omission tests corroborated the significant contributions of 11 compounds (1-octen-3-ol, linalool, geraniol, nonanal, (E)-2-octenal, citral, citronellal, limonene, α-pinene, β-myrcene and methylheptenone) to the characteristic aroma of FPO.