Water-Soluble Cruciforms: Response to Protons and Selected Metal Ions

2,5-Bis((E)-2-ferrocenylvinyl)-N,N,N′,N′-tetrapropylbenzene-1,4-diamine

The synthesis and spectroscopic investigation of an acidochromic phenylenevinylene dye with two ferrocene groups is presented.

PDMS with Tunable Side Group Mobility and Its Highly Permeable Membrane for Removal of Aromatic Compounds

Polydimethylsiloxane (PDMS), as the benchmark of organophilic membrane materials, still faces challenges for removal of aromatic compounds due to the undesirable transport channels. In this work, we propose to reconstruct the PDMS conformation with tunable side group mobility by introducing phenyl as rigid molecular spacer to relieve steric hindrance of large-sized aromatic molecules; meanwhile, polymer segments are loosely stacked to provide additional degrees of freedom as increasing the permeant size. Moreover, the reconstructed PDMS is engineered into the composite membrane with prevention of condensation of aromatic compounds in the substrate pores. The resulting thin-film composite membrane achieved one order of magnitude higher flux (11.8 kg m^-2  h^-1 ) with an equivalent separation factor (12.3) compared with the state-of-the-art membranes for aromatic removal. The permeant-customized membrane molecular and microstructure designing strategy opens a new avenue to develop membranes for specific separation targets.

Structural and spectroscopic insight into the metal binding properties of the o-aminophenol-N,N,O-triacetic acid (APTRA) chelator: implications for design of metal indicators

The o-aminophenol-N,N,O-triacetic acid (APTRA) chelator is employed extensively as a metal-recognition moiety in fluorescent indicators for biological free Mg(2+), as well as in low-affinity indicators for the detection of high levels of cellular Ca(2+). Despite its widespread use in sensor design, the limited metal selectivity of this chelating moiety can lead to binding of competing cations that complicate the fluorescence-based detection of metals of interest in complex samples. Reported herein are the structural characterization of APTRA complexes with various biologically relevant cations, and the thermodynamic analysis of complex formation with Mg(2+), Ca(2+) and Zn(2+). Our results indicate that the low affinity of APTRA for Mg(2+), which makes it a suitable metal-recognition moiety for sensitive analysis of typical millimolar levels of this metal in cells, stems from a much higher enthalpic cost of Mg(2+) binding compared to that of other cations. The results are discussed in the context of indicator design, highlighting the aspects that may aid the future development of fluorescent sensors with enhanced metal selectivity profiles.

Stimuli-responsive metal–organic supercontainers as synthetic proton receptors

Functional supercontainers exhibit intriguing H⁺-dependent fluorescent switching behavior, opening exiting new opportunities for proton modulation in both chemistry and biology.

Adjusting the energy levels and bandgaps of conjugated polymers via Lewis acid–base reactions

Stoichiometry of the Lewis acid–base coordination between polymers and BCF and the effects on the optoelectronic properties.

Lewis Acid-Base Chemistry of 7-Azaisoindigo-Based Organic Semiconductors

Low-band-gap organic semiconductors are important in a variety of organic electronics applications, such as organic photovoltaic devices, photodetectors, and field effect transistors. Building on our previous work, which introduced 7-azaisoindigo as an electron-deficient building block for the synthesis of donor-acceptor organic semiconductors, we demonstrate how Lewis acids can be used to further tune the energies of the frontier molecular orbitals. Coordination of a Lewis acid to the pyridinic nitrogen of 7-azaisoindigo greatly diminishes the electron density in the azaisoindigo π-system, resulting in a substantial reduction in the lowest unoccupied molecular orbital (LUMO) energy. This results in a smaller highest occupied molecular orbital-LUMO gap and shifts the lowest-energy electronic transition well into the near-infrared region. Both H⁺ and BF₃ are shown to coordinate to azaisoindigo and affect the energy of the S₀ → S₁ transition. A combination of time-dependent density functional theory and UV/vis and ¹H NMR spectroscopic titrations reveal that when two azaisoindigo groups are present and high concentrations of acid are used, both pyridinic nitrogens bind Lewis acids. Importantly, we demonstrate that this acid-base chemistry can be carried out at the solid-vapor interface by exposing thin films of aza-substituted organic semiconductors to vapor-phase BF₃·Et₂O. This suggests the possibility of using the BF₃-bound 7-azaisoindigo-based semiconductors as n-type materials in various organic electronic applications.

Solid-State Examination of Conformationally Diverse Sulfonamide Receptors Based on Bis(2-anilinoethynyl)pyridine, -Bipyridine, and -Thiophene

Utilizing an induced-fit model and taking advantage of rotatable acetylenic C(sp)-C(sp²) bonds, we disclose the synthesis and solid-state structures of a series of conformationally diverse bis-sulfonamide arylethynyl receptors using either pyridine, 2,2'-bipyridine, or thiophene as the core aryl group. Whereas the bipyridine and thiophene structures do not appear to bind guests in the solid state, the pyridine receptors form 2 + 2 dimers with water molecules, two halides, or one of each, depending on the protonation state of the pyridine nitrogen atom. Isolation of a related bis-sulfonimide derivative demonstrates the importance of the sulfonamide N-H hydrogen bonds in dimer formation. The pyridine receptors form monomeric structures with larger guests such as BF₄^- or HSO₄^-, where the sulfonamide arms rotate to the side opposite the pyridine N atom.

Unusual solvent-dependent photophysical and self-assembly properties of NO2 substituted T-shaped phenazines

The importance of NO₂ substituent placement on T-shaped phenazines relative to electronic, photophysical, and organogelation properties.

"Yin and Yang" tuned fluorescence sensing behavior of branched 1,4-bis(phenylethynyl)benzene

Achieving high sensing performance and good photostability of fluorescent films based on adlayer construction represents a significant challenge in the area of functional fluorescent film research. A solution may be offered by "Yin and Yang", a balance idea from Chinese philosophy, for the design of a fluorophore and the relevant assembly. Accordingly, a 1,4-bis(phenylethynyl)benzene (BPEB) derivative (C2) with two cholesteryl residues in the side chains and two glucono units in the head and tail positions was designed and synthesized. As a control, compound C1 was also prepared. The only difference between C1 and C2 is that the hydroxyl groups in the glucono residues of C1 are fully acetylated. Studies of the fluorescence behaviors of the two compounds in solution revealed that both the profile and the intensity of the fluorescence emission of the compounds, in particular C2, are dependent on their concentration and on the nature of solvents employed. Presence of HCl also alters the emission of the compounds in solution. On the basis of the studies, three fluorescent films were prepared, and their sensing performances to HCl in vapor state were studied. Specifically, Film 1 and Film 3 were fabricated via physical coating, separately, of C2 and C1 on glass plate surfaces. As another comparison, Film 2 was also fabricated with C2 as a fluorophore but at a much lower concentration if compared to that for the preparation of Film 1. As revealed by SEM and fluorescent microscopy studies, Film 1 and Film 2 exhibit well-defined microstructures, which are spherical particles and spherical pores, respectively, while Film 3 is characterized by irregular aggregates of C1. Fluorescence measurements demonstrated that Film 1 and Film 3 both display an aggregation emission, of which the emission from Film 1 is supersensitive to the presence of HCl vapor (detection limit: 0.4 ppb, a lowest value reported in the literatures). For Film 3, however, its emission is insensitive to the presence of the vapor. Similarly, the emission from the nonaggregated state of C2, a characteristic emission of Film 2, is also insensitive to the presence of the vapor. Furthermore, the sensing process of Film 1 to the vapor is highly selective and fully reversible, which lays foundation for its real-life uses. As for C2, the results from solution studies and those from film studies demonstrate clearly that introduction of auxiliary structures with opposite properties onto a typical fluorophore is a good strategy to develop fluorescent supramolecular motifs with rich assembly properties and great potential of applications.

Benzobisoxazole cruciforms as fluorescent sensors

CONSPECTUS: Cross-conjugated molecular cruciforms are intriguing platforms for optoelectronic applications. Their two intersecting π-conjugated arms allow independent modulation of the molecules' HOMO and LUMO levels and guarantee a well-defined optical response to analyte binding. In addition, the rigid cross-conjugated geometries of these molecules allow their organization in two- and three-dimensional space with long-range order, making them convenient precursors for the transition from solution-based to the more practical solid-state- and surface-based devices. Not surprisingly, a number of molecular cruciform classes have been explored because of these appealing properties. These include tetrakis(arylethynyl)benzenes, tetrastyrylbenzenes, distyrylbis(arylethynyl)benzenes, tetraalkynylethenes, biphenyl-based "swivel" cruciforms, and benzobisoxazole-based cruciforms. In this Account, we summarize our group's work on benzobisoxazole molecular cruciforms. The heterocyclic central core of these molecules forces their HOMOs to localize along the vertical bisethynylbenzene axis; the HOMO localization switches to the horizontal benzobisoxazole axis only in cases when that axis bears electron-rich 4-(N,N-dimethylamino)phenyl substituents and the vertical axis does not. In contrast, the LUMOs are generally delocalized across the entire molecule, and their localization occurs only in cruciforms with donor-acceptor substitution. Such spatially isolated frontier molecular orbitals (FMOs) of the benzobisoxazole cruciforms make their response to protonation very predictable. Benzobisoxazole cruciforms are highly solvatochromic, and their fluorescence quantum yields reach 80% in nonpolar solvents. Solutions of cruciforms in different solvents change emission colors upon addition of carboxylic and boronic acid analytes. These changes are highly sensitive to the analyte structure, and the emission color responses permit qualitative discrimination among structurally closely related species. In self-assembled complexes with boronic acids, benzobisoxazole fluorophores switch their analyte preferences and become responsive to Lewis basic species: phenoxides, amines, ureas, and small organic and inorganic anions. These sensing complexes allow the decoupling of the sensor's two functions: a nonfluorescent boronic acid does the chemistry through the exchange of its labile B-O bonds for other nucleophiles, and it can be optimized for solubility and analyte specificity; the benzobisoxazole fluorophore senses the electronic changes on the boron and reports them to the operator through changes in its emission colors, allowing this sensing element to be kept constant across a broad range of analytes. We have recently expanded our studies to benzimidazole-based "half-cruciforms", which are L-shaped rigid fluorophores that maintain most of the spatial separation of FMOs observed in benzobisoxazole cruciforms. Unlike benzobisoxazoles, benzimidazoles are acidic on account of their polar N-H bonds, and this feature allows them to respond to a broader range of pH values than their benzobisoxazole counterparts. The deprotonated benzimidazolate anions maintain their fluorescence, which makes them promising candidates for incorporation into solid-state sensing materials known as zeolithic imidazolate frameworks.

Luminescent Fluorene-Based Bis-Pyrazolyl Aniline Ligand for Aluminum Detection

The design, synthesis, and photophysical properties of a new fluorene-based fluorescent chemosensor, 4-((E)-2-(2-(benzo[d]thiazol-2-yl)-9,9-diethyl-9H-fluoren-7-yl)vinyl)-N,N-bis((3,5-dimethyl-1H-pyrazol-1-yl)methyl)benzenamine (AXF-Al), is described for the detection of Al3+. AXF-Al exhibited absorption at 382 nm and strong fluorescence emission at 542 nm (fluorescence quantum yield, Φ F, of 0.80). The capture of Al3+ by the pyrazolyl aniline receptor resulted in nominal change in the linear absorption (372 nm) but a large hypsochromic shift of 161 nm in the fluorescence spectrum (542 to 433 nm, Φ F = 0.88), from which Al3+ was detected both ratiometrically and colorimetrically. The addition of other metal ions, namely Mg2+, Ca2+, Mn2+, Fe2+, Co2+, Ni2+, Cu2+, Zn2+, Cd2+, Hg 2+ and Pb2+, produced only minimal changes in the optical properties of this probe. The emission band of this probe was also accessed by two-photon excitation in the near-IR, as two-photon absorption (2PA) is important for potential applications in two-photon fluorescence microscopy (2PFM) imaging. The 2PA cross section of the free fluorenyl ligand AXF-Al was 220 GM at 810 nm and 235 GM at 810 nm for the Al-ligand complex, practically useful properties for 2PFM.

A novel calix[4]arene thiol functionalized silver nanoprobe for selective recognition of ferric ion with nanomolar sensitivity via DLS selectivity in human biological fluid

A high concern for human health and safety has motivated dynamic research on the potential impact of transition metal ions and their toxic effects, thus it is very challenging to design transition-metal ion detection devices that are cost-effective, rapid and applicable to the biological milieus. Driven by the need to detect trace amounts of Fe(3+) from blood samples, we report a highly selective and ultrasensitive calix[4]arene modified silver nanoprobe for Fe(3+) recognition at the 9.4 nM level from aqueous solution with excellent discrimination against other heavy metals and biomolecules. The assembly was characterized by TEM (transmission electron microscopy), DLS (dynamic light scattering), UV-Vis, FT-IR, ESI-MS and (1)H NMR spectrometry, which demonstrate the higher binding affinity for Fe(3+). The biosensor has been successfully applied to estimate the ferric ion in human blood serum as well as in human hemoglobin.

Conjugated polyelectrolyte-antibody hybrid materials for highly fluorescent live cell-imaging

Conjugated polyelectrolyte-antibody hybrid materials promise to enhance the utility of conjugated polymers in bioimaging field. Polymer-antibody conjugates that are biologically safe and highly sensitive and selective to cells are designed to image human T or B lymphocytes. In the clear state, the observed efficiency of luminescence is superior to that of commercially available FITC-antibody probe.

Aldehyde cruciforms: dosimeters for primary and secondary amines

We demonstrate that aldehyde-substituted donor-acceptor cruciforms [1,4-bis(arylethynyl)-2,5-distyrylbenzenes] are useful dosimeters for primary amines, primary diamines, and secondary amines. The 1,n-diamines are particularly reactive towards this dosimeter and can be detected in less than 100 ppm concentration. Using a single aldehyde-functionalized cruciform in seven different solvents allowed us to discern fourteen different amines by digital photography and statistical evaluation of the response patterns extracted as red, green, blue (RGB) values.

Lewis acid adducts of narrow band gap conjugated polymers

We report on the interaction of Lewis acids with narrow band gap conjugated copolymers containing donor and acceptor units. Examination of the widely used poly[(4,4-bis(2-ethylhexyl)cyclopenta-[2,1-b:3,4-b']dithiophene)-2,6-(diyl-alt-benzo[2,1,3]thiadiazole)-4,7-diyl] (1) shows weaker binding with B(C(6)F(5))(3) when compared with a small molecule that contains a cyclopenta-[2,1-b:3,4-b']dithiophene (CDT) unit flanked by two benzo[2,1,3]thiadiazole (BT) fragments. Studies on model compounds representative of 1, together with a comparison between B(C(6)F(5))(3) and BBr(3), indicate that the propensity for Lewis acid coordination is decreased because of steric encumbrance surrounding the BT nitrogen sites. These observations led to the design of chromophores that incorporate an acceptor unit with a more basic nitrogen site, namely pyridal[2,1,3]thiadiazole (PT). That this strategy leads to a stronger B-N interaction was demonstrated through the examination of the reaction of B(C(6)F(5))(3) with two small molecules bis(4,4-bis(hexyl)-4H-cyclopenta[2,1-b;3,4-b']dithiophene)-4,7-pyridal[2,1,3]thiadiazole (8) and bis{2-thienyl-(4,4-bis(hexyl)-4H-cyclopenta[2,1-b;3,4-b']dithiophene)}-4,7-pyridal[2,1,3]thiadiazole (9) and two polymer systems (poly[(4,4-bis(2-ethylhexyl)cyclopenta-[2,1-b:3,4-b']dithiophene)-2,6-diyl-alt-([1,2,5]thiadiazolo[3,4-c]pyridine)-4,7-diyl] (10) and poly[(4,4-bis(2-ethylhexyl)cyclopenta-[2,1-b:3,4-b']dithiophene)-2,6-diyl-alt-(4',7'-bis(2-thienyl)-[1,2,5]thiadiazolo[3,4-c]pyridine)-5,5-diyl] (11). From a materials perspective, it is worth pointing out that through the binding of B(C(6)F(5))(3), new NIR-absorbing polymers can be generated with band gaps from 1.31 to 0.89 eV. A combination of studies involving ultraviolet photoemission spectroscopy and density functional theory shows that the narrowing of the band gap upon borane coordination to the pyridal nitrogen on PT is a result of lowering the energies of both the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) of the optically relevant fragments; however, the LUMO is decreased to a greater extent, thereby giving rise to the narrowing of the gap.

Cross-conjugated cruciform fluorophores

In optoelectronic devices, chromophores can be designed at the molecular level to create materials with properties desired for advanced applications. Organic fluorophores in particular can be constructed with macroscopic properties that arise from two distinct contributions: (i) the collective impact of the molecular backbone and substituents and (ii) the connectivity within the molecule (that is, the spatial molecular architecture). Accordingly, the exploration of novel conjugated architectures is a productive area of current research. Different two-dimensional, "X-shaped" conjugated materials have been synthesized for a variety of applications. They include spiro compounds, paracyclophanes, swivel-type dimers, bisoxazole-derived cruciforms, tetraethynylethenes, and tetrasubstituted tolanes. A subset of these compounds are constructed from two "perpendicular" pi-conjugated linear arms connected through a central aromatic core; examples of these include tetrakis(arylethynyl)benzenes, tetrakis(styryl)benzenes, and tetrasubstituted thiophenes. In this Account, we evaluate 1,4-distyryl-2,5-bis(arylethynyl)benzenes or cruciforms (XFs). Electronic substitution of this "X-shaped" cross-conjugated scaffold tunes both the energy levels of the frontier molecular orbitals (FMOs) and their spatial distribution in XFs. The resulting fluorophores exhibit FMO separation, imbuing XFs with unusual yet desirable properties for sensory applications. Using model analytes, we examine how the underlying FMO arrangement and the nature of analyte interaction elicit observable responses. These studies provide a foundation for accessing functional responsive ratiometric cores, demonstrating the importance and unique potential of FMO-separated fluorophores. We also highlight the essential contribution of serendipity in materials development. Moving beyond one-dimensional molecular wire-type fluorophores to two-dimensional "X-shaped" materials provides access to materials with unexpected and exciting properties. XFs represent such novel conjugated architectures, and their successful development has frequently has hinged on inspiration from structural components and principles developed in diverse research areas.

Cyclodextrin supramolecular complex as a water-soluble ratiometric sensor for ferric ion sensing

Heightened concern for human health and environmental protection has stimulated active research on the potential impact of transition-metal ions and their toxic effects, thus it is very demanding to design transition-metal ion detection methods that are cost-effective, rapid, facile, and applicable to the environmental and biological milieus. In this study, we demonstrated an alternative strategy for constructing a water-soluble FRET-based ratiometric sensor for ferric ion detection by forming a supramolecular beta-cyclodextrin/dye complex. This water-soluble FRET system consists of a dansyl-linked beta-cyclodextrin (beta-CD-DNS) and a spirolactam rhodamine-linked adamantane (AD-SRhB). The dansyl moiety serves as the donor, and the spirolactam-rhodamine B derivative (SRhB) was chosen as a sensitive, selective chemosensor for Fe(III) ions and a very efficient ring-opening reaction induced by Fe(III) generates the long-wavelength rhodamine B fluorophore that can act as the energy acceptor. Moreover, the adamantyl (AD) group, which is known for its capability to form stable host-guest inclusion complexes with beta-CD derivatives, was covalently linked to the spirolactam rhodamine, thus the adamantyl moiety of the ion-recognition element can be anchored inside the CD cavity. In this way, the donor-acceptor separation can be kept within the critical Forster distance; accordingly, energy transfer can take place from the donor (dansyl) to the acceptor (rhodamine derivative/Fe(III) complex), and thus ratiometric detection for Fe(III) in an aqueous medium can be fulfilled. This FRET-based supramolecular sensor can be readily formed via an inclusion process using the donor part and the acceptor part, hence this strategy could afford a robust approach for constructing a wide range of FRET-based water-soluble sensing systems simply by assembling a specifically predesigned donor-linked CD and acceptor-linked adamantane.