Microbial degradation of petroleum hydrocarbons

Potential of dissimilatory nitrate reduction pathways in polycyclic aromatic hydrocarbon degradation

This study investigates the potential of an indigenous estuarine microbial consortium to degrade two polycyclic aromatic hydrocarbons (PAHs), naphthalene and fluoranthene, under nitrate-reducing conditions. Two physicochemically diverse sediment samples from the Lima Estuary (Portugal) were spiked individually with 25 mg L^-1 of each PAH in laboratory designed microcosms. Sediments without PAHs and autoclaved sediments spiked with PAHs were run in parallel. Destructive sampling at the beginning and after 3, 6, 12, 30 and 63 weeks incubation was performed. Naphthalene and fluoranthene levels decreased over time with distinct degradation dynamics varying with sediment type. Next-generation sequencing (NGS) of 16 S rRNA gene amplicons revealed that the sediment type and incubation time were the main drivers influencing the microbial community structure rather than the impact of PAH amendments. Predicted microbial functional analyses revealed clear shifts and interrelationships between genes involved in anaerobic and aerobic degradation of PAHs and in the dissimilatory nitrate-reducing pathways (denitrification and dissimilatory nitrate reduction to ammonium - DNRA). These findings reinforced by clear biogeochemical denitrification signals (NO₃^- consumption, and NH₄⁺ increased during the incubation period), suggest that naphthalene and fluoranthene degradation may be coupled with denitrification and DNRA metabolism. The results of this study contribute to the understanding of the dissimilatory nitrate-reducing pathways and help uncover their involvement in degradation of PAHs, which will be crucial for directing remediation strategies of PAH-contaminated anoxic sediments.

Biostimulation and bioaugmentation of native microbial community accelerated bioremediation of oil refinery sludge

Scope for developing an engineered bioremediation strategy for the treatment of hydrocarbon-rich petroleum refinery waste was investigated through biostimulation and bioaugmentation approaches. Enhanced (46-55%) total petroleum hydrocarbon (TPH) attenuation was achieved through phosphate, nitrate or nitrate+phosphate amendment in the sludge with increased (upto 12%) abundance of fermentative, hydrocarbon degrading, sulfate-reducing, CO₂-assimilating and methanogenic microorganisms (Bacillus, Coprothermobacter, Rhodobacter, Pseudomonas, Achromobacter, Desulfitobacter, Desulfosporosinus, T78, Methanobacterium, Methanosaeta, etc). Together with nutrients, bioaugmentation with biosurfactant producing and hydrocarbon utilizing indigenous Bacillus strains resulted in 57-75% TPH reduction. Phylogenetic Investigation of Communities by Reconstruction of Unobserved States (PICRUSt) analysis revealed enhanced gene allocation for transporters (0.45-3.07%), ABC transporters (0.38-2.07%), methane (0.16-1.06%), fatty acid (0.018-0.15%), nitrogen (0.07-0.17%), butanoate (0.06-0.35%), propanoate (0.004-0.26%) metabolism and some xenobiotics (0.007-0.13%) degradation. This study indicated that nutrient-induced community dynamics of native microorganisms and their metabolic interplay within oil refinery sludge could be a driving force behind accelerated bioremediation.

Insights into microbial communities mediating the bioremediation of hydrocarbon-contaminated soil from an Alpine former military site

The study of microbial communities involved in soil bioremediation is important to identify the specific microbial characteristics that determine improved decontamination rates. Here, we characterized bacterial, archaeal, and fungal communities in terms of (i) abundance (using quantitative PCR) and (ii) taxonomic diversity and structure (using Illumina amplicon sequencing) during the bioremediation of long-term hydrocarbon-contaminated soil from an Alpine former military site during 15 weeks comparing biostimulation (inorganic NPK fertilization) vs. natural attenuation and considering the effect of temperature (10 vs. 20 °C). Although a considerable amount of total petroleum hydrocarbon (TPH) loss could be attributed to natural attenuation, significantly higher TPH removal rates were obtained with NPK fertilization and at increased temperature, which were related to the stimulation of the activities of indigenous soil microorganisms. Changing structures of bacterial and fungal communities significantly explained shifts in TPH contents in both natural attenuation and biostimulation treatments at 10 and 20 °C. However, archaeal communities, in general, and changing abundances and diversities in bacterial and fungal communities did not play a decisive role on the effectiveness of soil bioremediation. Gammaproteobacteria and Bacteroidia classes, within bacterial community, and undescribed/novel groups, within fungal community, proved to be actively involved in TPH removal in natural attenuation and biostimulation at both temperatures.

Improvement of biosurfactant production by Wickerhamomyces anomalus CCMA 0358 and its potential application in bioremediation

In this work, biosurfactant production by Wickerhamomyces anomalus CCMA 0358 was increased through the development of an optimized culture medium using response surface methodology. The optimized culture medium contained yeast extract (4.64 g/L), ammonium sulfate (4.22 g/L), glucose (1.39 g/L) and olive oil (10 g/L). Biosurfactant production using this medium was validated both in flasks and bioreactor, and the surface tension was reduced from 49.0 mN/m up to 31.4 mN/m and 29.3 mN/m, respectively. In both cases, the highest biosurfactant production was achieved after 24 h of growth. W. anomalus CCMA 0358 demonstrated to be a fast biosurfactant producer (24 h) as compared to other yeast strains previously reported (144-240 h). The produced biosurfactant remained stable at high temperature (121 °C), NaCl concentrations as high as 300 g/L, and pH values between 6 and 12. The crude biosurfactant allowed the recovery of 20% of crude oil from contaminated sand, being a promising candidate for application in bioremediation or in the petroleum industry.

Complete genome sequence of Tsukamurella sp. MH1: A wide-chain length alkane-degrading actinomycete

Tsukamurella sp. strain MH1, capable to use a wide range of n-alkanes as the only carbon source, was isolated from petroleum-contaminated soil (Pitești, Romania) and its complete genome was sequenced. The 4,922,396 bp genome contains only one circular chromosome with a G + C content of 71.12%, much higher than the type strains of this genus (68.4%). Based on the 16S rRNA genes sequence similarity, strain MH1 was taxonomically identified as Tsukamurella carboxydivorans. Genome analyses revealed that strain MH1 is harboring only one gene encoding for the alkB-like hydroxylase, arranged in a complete alkane monooxygenase operon. This is the first complete genome of the specie T. carboxydivorans, which will provide insights into the potential of Tsukamurella sp. MH1 and related strains for bioremediation of petroleum hydrocarbons-contaminated sites and into the environmental role of these bacteria.

Microbial dynamics in petroleum oilfields and their relationship with physiological properties of petroleum oil reservoirs

Petroleum is produced by thermal decay of buried organic material over millions of years. Petroleum oilfield ecosystems represent resource of reduced carbon which favours microbial growth. Therefore, it is obvious that many microorganisms have adapted to harsh environmental conditions of these ecosystems specifically temperature, oxygen availability and pressure. Knowledge of microorganisms present in ecosystems of petroleum oil reservoirs; their physiological and biological properties help in successful exploration of petroleum. Understanding microbiology of petroleum oilfield(s) can be used to enhance oil recovery, as microorganisms in oil reservoirs produce various metabolites viz. gases, acids, solvents, biopolymers and biosurfactants. The aim of this review is to discuss characteristics of petroleum oil reservoirs. This review also provides an updated literature on microbial ecology of these extreme ecosystems including microbial origin as well as various types of microorganisms such as methanogens; iron, nitrate and sulphate reducing bacteria, and fermentative microbes present in petroleum oilfield ecosystems.

Comprehensive review on toxicity of persistent organic pollutants from petroleum refinery waste and their degradation by microorganisms

Control and prevention of environmental pollution has become a worldwide issue of concern. Aromatic hydrocarbons including benzene, toluene, ethyl benzene, xylene (BTEX) and polyaromatic hydrocarbons (PAHs) are persistent organic pollutants (POPs), released into the environment mainly by exploration activities of petroleum industry. These pollutants are mutagenic, carcinogenic, immunotoxic and teratogenic to lower and higher forms of life i.e. microorganisms to humans. According to the International Agency for Research on Cancer (IARC) and United States Environmental Protection Agency (U.S. EPA), Benzo[a]pyrene (BaP) is carcinogenic in laboratory animals and humans. Aromatic hydrocarbons are highly lipid soluble and thus readily absorbed from environment in gastrointestinal tract of mammals. Treatment and remediation of petroleum refinery waste have been shown either to reduce or to eliminate genotoxicity of these pollutants. Bioremediation by using microorganisms to treat this waste is showing a promising technology as it is safe and cost-effective option among various technologies tested. The main aim of this review is to provide contemporary information on variety of aromatic hydrocarbons present in crude oil (with special focus to mono- and poly-aromatic hydrocarbons), exposure routes and their adverse effects on humans. This review also provides a synthesis of scientific literature on remediation technologies available for aromatic hydrocarbons, knowledge gaps and future research developments in this field.

Bioremediation of storage tank bottom sludge by using a two-stage composting system: Effect of mixing ratio and nutrients addition

The effect of mixing ratio and nutrients addition on the efficiency of a two-stage composting system in removal of total petroleum hydrocarbons (TPH) from storage tank bottom sludge (STBS) was investigated. The system consisted of ten windrow piles as primary composting (PC) followed by four in-vessel reactors as secondary composting (SC). Various initial C/N/P and mixing ratios of STBS to immature compost (IC) were examined in the PC and SC for 12 and 6weeks, respectively. The removal rates of TPH in the two-stage system (93.72-95.24%) were higher than those in the single-stage one. Depending on the experiments, TPH biodegradation fitted to the first- and second-order kinetics with the rate constants of 0.051-0.334d^-1 and 0.002-0.165gkg^-1d^-1, respectively. The bacteria identified were Pseudomonas sp., Bacillus sp., Klebsiella sp., Staphylococcus sp., and Proteus sp. The study verified that a two-stage composting system is effective in treating the STBS.

Quantitative proteomics analysis of proteins involved in alkane uptake comparing the profiling of Pseudomonas aeruginosa SJTD-1 in response to n-octadecane and n-hexadecane

While many data are available on genes encoding proteins for degradation of hydrocarbons in bacteria, the impact of alkane on transporter protein expression is unclear. Pseudomonas aeruginosa SJTD-1 is a strain that can consume medium- and long-chain n-alkanes. In order to study the proteins involved in n-octadecane uptake, we use iTRAQ and label free comparative proteomics analysis to identify the proteins of alkane uptake in response to n-octadecane (C18) comparing with n-hexadecane (C16) in P. aeruginosa SJTD-1. A total of 1102 and 1249 proteins were identified by iTRAQ-based and label free quantitative methodologies, respectively. By application of 1.5 (iTRAQ) or 2-fold (label free) for upregulated and 0.65 (iTRAQ) or 0.5-fold (label free) for downregulated cutoff values, 91 and 99 proteins were found to be differentially expressed comparing SJTD-1 cultivated on C18 with C16 respectively. There are six proteins with the common differential expression by iTRAQ and label free-based methods. Results of bioinformational analysis suggested the involvement of bacterial chemotaxis in responds to C18. Additionally, quantitative reverse transcriptase PCR (qRT-PCR) results confirmed C18-induced change in levels of FleQ, FliC, NirS, FadL and FadD proteins and the role of the proteins in n-octadecane uptake was further discussed in P. aeruginosa. In conclusion, results of the present study provided information about possible target-related proteins of bacterial chemotaxis, swimming performance, alkane transport to stimulus of n-ctadecane rather than n-hexadecane in P. aeruginosa SJTD-1.

Critical review on biosurfactant analysis, purification and characterization using rhamnolipid as a model biosurfactant

Surfactants are one of the most versatile group of chemicals used in various industrial processes. Their market is competitive, and manufacturers will have to expand surfactant production in ecofriendly and cost effective manner. Increasing interest in biosurfactants led to an intense research for environment friendly and cost-efficient production of biosurfactant. Structural diversity and functional properties of biosurfactants make them an attractive group of compounds for potential use in wide variety of industrial, environmental and biotechnological applications. Screening methods make task easier to obtain potential biosurfactant producing microorganisms. Variety of purification and analytical methods are available for biosurfactant structural characterization. This review aims to compile information on types and properties of biosurfactant, microbial screening methods as well as biosynthesis, extraction, purification and structural characterization of biosurfactant using rhamnolipid as a model biosurfactant. It also describes factors affecting rhamnolipid production. It gives an overview of oil recovery using biosurfactant from Pseudomonas aeruginosa.

Biochemical, Molecular, and Transcriptional Highlights of the Biosynthesis of an Effective Biosurfactant Produced by Bacillus safensis PHA3, a Petroleum-Dwelling Bacteria

Petroleum crude oil (PCO)-dwelling microorganisms have exceptional biological capabilities to tolerate the toxicity of petroleum contaminants and are therefore promising emulsifier and/or degraders of PCO. This study describes a set of PCO-inhabiting bacterial species, one of which, identified as Bacillus safensis PHA3, produces an efficient biosurfactant which was characterized as a glycolipid. Fourier transform infrared spectrometer, nuclear magnetic resonance, Thin layer chromatography, HPLC, and GC-MS analysis of the purified biosurfactant revealed that the extracted molecule under investigation is likely a mannolipid molecule with a hydrophilic part as mannose and a hydrophobic part as hexadecanoic acid (C16:0). The data reveal that: (i) PHA3 is a potential producer of biosurfactant (9.8 ± 0.5 mg mL^-1); (ii) pre-adding 0.15% of the purified glycolipid enhanced the degradation of PCO by approximately 2.5-fold; (iii) the highest emulsifying activity of biosurfactant was found against the PCO and the lowest was against the naphthalene; (iv) the optimal PCO-emulsifying activity was found at 30-60°C, pH 8 and a high salinity. An orthologous gene encodes a putative β-diglucosyldiacylglycerol synthase (β-DGS) was identified in PHA3 and its transcripts were significantly up-regulated by exogenous PAHs, i.e., pyrene and benzo(e)pyrene but much less by mid-chain n-alkanes (ALKs) and fatty acids. Subsequently, the accumulation of β-DGS transcripts coincided with an optimal growth of bacteria and a maximal accumulation of the biosurfactant. Of particular interest, we found that PHA3 actively catalyzed the degradation of PAHs notably the pyrene and benzo(e)pyrene but was much less effective in the mono-terminal oxidation of ALKs. Such characteristics make Bacillus safensis PHA3 a promising model for enhanced microbial oil recovery and environmental remediation.