Development of multifunctional food packaging films based on waste Garlic peel extract and Chitosan

A sustainable multifunctional food packaging composite film containing waste garlic peel extract (GPE) and Chitosan (CH) was prepared. This film exhibited antimicrobial potential towards Staphylococcus aureus and Klebsiella pneumoniae. GPE/CH films' morphological, physical, and functional properties were compared to those of CH film. Fourier transform infrared showed the interactions through hydrogen bonding between CH and GPE in the blends that improved the polymers' compatibility. Furthermore, X-ray diffraction analysis validated the compatibility between GPE and CH. GPE/CH films exhibited higher thickness and moisture content than the CH film. Remarkably, GPE/CH films showed lower water vapor barrier properties and higher ultra-violet protection and mechanical strength than CH film. Compact surfaces of the GPE infused CH films were unveiled through Scanning electron microscopy. GPE/CH film showed improved thermal stability after the addition of GPE. MTT method's cytotoxicity study manifested that the GPE/CH films are antioxidant and non-cytotoxic, implicating their biocompatibility and non-toxicity. The results suggest that GPE/CH films can find widespread commercial applications like food packaging materials, replacing the commonly used petrochemical plastics.

Preparation, characterization and application of smart packaging films based on locust bean gum/polyvinyl alcohol blend and betacyanins from cockscomb (Celosia cristata L.) flower

Cockscomb (Celosia cristata L.) is an edible and ornamental plant rich in natural pigments of betacyanins. In this study, smart packaging films were developed based on locust bean gum (LBG), polyvinyl alcohol (PVA) and betacyanins from cockscomb flower. Effect of cockscomb flower extract content (4 wt%, 8 wt% and 12 wt%) on the structural, physical and functional properties of LBG/PVA blend films was investigated. The addition of cockscomb flower extract elevated the immiscibility between LBG and PVA. Cockscomb flower extract interacted with LBG and PVA through hydrogen bonds, resulting in reduced film crystallinity. The film containing 8 wt% of cockscomb flower extract showed the lowest water vapor permeability (10.34 × 10^-11 g m^-1 s^-1 Pa^-1) and the highest tensile strength (23.63 MPa). The film containing 12 wt% cockscomb flower extract exhibited the lowest light transmittance and the highest elongation at break (41.12%) and antioxidant activity. Cockscomb flower extract made the films become reddish-purple and endowed the films with pH-sensitivity and ammonia-sensitivity. The films containing cockscomb flower extract showed obvious color changes from reddish-purple to brown/yellow when shrimp spoiled. Our results suggested LBG/PVA blend films with cockscomb flower extract were suitable smart packaging films for indicating shrimp freshness.

Silk Fibroin and Pomegranate By-Products to Develop Sustainable Active Pad for Food Packaging Applications

In this study, a bio-based polymeric system loaded with fruit by-products was developed. It was based on silk fibroin produced by the silkworm Bombyx mori and pomegranate peel powder, selected as active agent. The weight ratio between fibroin and pomegranate powder was 30:70. Pads also contained 20% w/w of glycerol vs. fibroin to induce water insolubility. Control systems, consisting of only fibroin and glycerol, were produced as reference. Both control and active systems were characterized for structural and morphological characterization (Fourier-transform infrared spectroscopy and optical microscope), antioxidant properties and antimicrobial activity against two foodborne spoilage microorganisms. Results demonstrate that under investigated conditions, an active system was obtained. The pad showed a good water stability, with weight loss of about 28% due to the release of the active agent and not to the fibroin loss. In addition, this edible system has interesting antioxidant and antimicrobial properties. In particular, the pad based on fibroin with pomegranate peel recorded an antioxidant activity of the same order of magnitude of that of vitamin C, which is one of the most well-known antioxidant compounds. As regards the antimicrobial properties, results underlined that pomegranate peel in the pad allowed maintaining microbial concentration around the same initial level (10⁴ CFU/mL) for more than 70 h of monitoring, compared to the control system where viable cell concentration increased very rapidly up to 10⁸ CFU/mL.

Antimicrobial Properties of Lyophilized Extracts of Olive Fruit, Pomegranate and Orange Peel Extracts against Foodborne Pathogenic and Spoilage Bacteria and Fungi In Vitro and in Food Matrices

Several novel antimicrobials with different concentrations of olive, pomegranate, and orange fruit pulp extracts were produced from agricultural byproducts and, after lyophilization, their antimicrobial activity and potential synergistic effects were evaluated in vitro and in food samples against foodborne pathogenic and spoilage bacteria and fungi. The Minimum Inhibitory of the tested bacteria was 7.5% or 10%, while fungi were inhibited at a concentration of 10% or above. The optical density of bacterial and yeast cultures was reduced to a different extent with all tested antimicrobial powders, compared to a control without antimicrobials, and mycelium growth of fungi was also restricted with extracts containing at least 90% olive extract. In food samples with inoculated pathogens and spoilage bacteria and fungi, the 100% olive extract was most inhibitory against E. coli, S. typhimurium, and L. monocytogenes in fresh burger and cheese spread samples (by 0.6 to 1.8 log cfu/g), except that S. typhimurium was better inhibited by a 90% olive and 10% pomegranate extract in burgers. The latter extract was also the most effective in controlling the growth of inoculated fungi (Aspergillus niger, Penicillium italicum, Rhodotorula mucilaginosa) in both yogurt and tomato juice samples, where it reduced fungal growth by 1–2.2 log cfu/g at the end of storage period. The results demonstrate that these novel encapsulated extracts could serve as natural antimicrobials of wide spectrum, in order to replace synthetic preservatives in foods and cosmetics.

Response of two strains of growing Japanese quail (Coturnix Coturnix Japonica) to diet containing pomegranate peel powder

Four hundred and eighty 1-day-old Japanese quail chicks from white and brown strains, 240 birds from each strain, were divided into 4 treatment groups with 6 replicates each (10 birds/replicate). Both strains of quail were fed diets containing 0%, 3%, 6%, and 9% pomegranate peel (PP) powder for a period of 42 days. Results revealed that the final body weight (BW), total feed intake (TFI), body weight gain (BWG), gizzard percentage, and eviscerated carcass weight of white growing quails were significantly (P < 0.05) higher than the brown strain. Quail group fed with 6% PP powder had the highest (P < 0.001) average final BW and BWG (P < 0.001). The dietary PP powder at different levels significantly (P = 0.032) decreased TFI, but had no significant effect on carcass traits except for the liver percentage. Quails fed diet 3% and 9% PP powder had significant (P < 0.001) increased count of immune cells, and improved antioxidant potency. White quails fed diet 3% and 6% PP powder had greater expression of hepatic GHR gene. The expression of hepatic IGF-1 gene was significantly (P < 0.05) higher for brown quails fed diet 6% and 9% PP powder. White quails recorded the highest value of total return (TR). Quails fed diet 6% and 9% PP powder significantly (P < 0.001) recorded higher net return (NR) values. In conclusion, dietary inclusion of PP powder at levels up to 9% for Japanese quail strains improved the growth performance, increased antioxidant properties, enhanced hepatic gene expression, and did not show any adverse influence on carcass quality and blood indices of Japanese quail. Moreover, it increased the NR.

Antimicrobial Potential of Plastic Films Incorporated with Sage Extract on Chicken Meat

The function of packaging is crucial in the maintenance of fresh meat product quality. This study aimed to assess the efficiency of six films added with coatings 2379L/220 and 2379L/221 (containing sage extracts) to inhibit Salmonella typhimurium, Staphylococcus aureus, and Escherichia coli, which showed that two of the six films had a significant effect. Additionally, the effects of the films on refrigerated skinless chicken breast meat were evaluated based on microbiological content, colour, weight loss, texture and pH. Four of the six films were examined could extend the storability of refrigerated chicken breast fillets for up to seven days. All six treated films improved the pH, colour stability, weight loss, and texture of the chicken fillets. Therefore, these findings suggested that the coatings containing sage extracts having different viscosities (2379L/220 and 2379L/221) were effective as antimicrobial adhesives in food packaging films and can be commercially applied in prolonging the storage of chicken breast meat without affecting their quality.

Green Coating Polymers in Meat Preservation

Edible coatings, including green polymers are used frequently in the food industry to improve and preserve the quality of foods. Green polymers are defined as biodegradable polymers from biomass resources or synthetic routes and microbial origin that are formed by mono- or multilayer structures. They are used to improve the technological properties without compromising the food quality, even with the purpose of inhibiting lipid oxidation or reducing metmyoglobin formation in fresh meat, thereby contributing to the final sensory attributes of the food and meat products. Green polymers can also serve as nutrient-delivery carriers in meat and meat products. This review focuses on various types of bio-based biodegradable polymers and their preparation techniques and applications in meat preservation as a part of active and smart packaging. It also outlines the impact of biodegradable polymer films or coatings reinforced with fillers, either natural or synthesized, via the green route in enhancing the physicochemical, mechanical, antimicrobial, and antioxidant properties for extending shelf-life. The interaction of the package with meat contact surfaces and the advanced polymer composite sensors for meat toxicity detection are further considered and discussed. In addition, this review addresses the research gaps and challenges of the current packaging systems, including coatings where green polymers are used. Coatings from renewable resources are seen as an emerging technology that is worthy of further investigation toward sustainable packaging of food and meat products.

Impacts of chitosan nanoemulsions with thymol or thyme essential oil on volatile compounds and microbial diversity of refrigerated pork meat

This study aimed to investigate the effects of antibacterial substances embedded in nanoemulsions on the volatile compounds and the bacterial community composition of refrigerated pork stored at 4 °C for 12 days, and to evaluate the relationship between volatile components and bacterial diversity of refrigerated pork. As compared to the control (CK) group, the treatment groups (thyme essential oil chitosan nanoemulsions (TEO-CS), thymol chitosan nanoemulsions (T-CS) and chitosan nanoemulsions (CS)) showed lower TVB-N values, pH values, TBARs values and better protective against color degradation. The E-nose and GC-MS evaluation indicated that compounds causing unpleasant odors could be inhibited in the T-CS and TEO-CS groups. In addition, high-throughput sequencing showed that Pseudomonas (18.3%), Lactococcus (27.0%) and Acinetobacter (38.8%) were predominant genera of refrigerated pork in the early storage period. At day 12, Pseudomonas (84.3%) increased rapidly in the CK group and became the main microbiota. By contrast, both coatings changed the microbial composition, reduced the proportion of spoilage organisms and retained bacterial diversity. Therefore, chitosan nanoemulsions with antibacterial substance could be considered as an effective supplementary and method to improve the preservation effect of fresh pork, which provides a solution to against conventional packaging and extend the shelf-life of meat.

Guar (Cyamopsis tetragonoloba L.) plant gum: From biological applications to advanced nanomedicine

Natural polymers are an efficient class of eco-friendly and biodegradable polymers, because they are readily available, come from natural sources, inexpensive and can be chemically modified with the correct reagents. Guar gum (GG) is a natural polymer with great potential to be used in pharmaceutical formulations due to its unique composition and lack of toxicity. GG can be designed to suit the needs of the biological and medical engineering sectors. In the development of innovative drug delivery systems, GG is commonly utilized as a rate-controlling excipient. In this review, different properties of GG including chemical composition, extraction methods and its usefulness in diabetes, cholesterol lowering, weight control, tablet formulations as well as its food application were discussed. The other purpose of this study is to evaluate potential use of GG and its derivatives for advanced nanomedicine such as drug delivery, tissue engineering and nanosensing. It should be noted that some applicable patents in medical area have also been included in the rest of this survey to extend knowledge about guar gum and its polymeric nature.

Activity of Clove Oil and Chitosan Nanoparticles Incorporated PVA Nanocomposite Against Pythium aphanidermatum

The loss of fresh produces owing to the microbial infestation is a major challenge to the global food industry. The drastic food loss caused mainly by the fungal attack demands the need for development of active packaging materials with antimicrobial properties. Many studies have already been reported on the applications of polymers like polyvinyl alcohol (PVA) engineered with antimicrobial components as active antifungal packaging materials. In the current study, material properties of PVA alone, PVA incorporated with chitosan nanoparticles (PCS), clove oil (PCO), and their combination (PCSCO) have been studied for its microbial barrier and antifungal properties. All the developed films were characterised by the XRD and FTIR analysis, which confirmed the molecular interactions among the individual components of the nanocomposite. At the same time, the bionanocomposite PCSCO was found to have low moisture content and film solubility indicating its suitability for the modified atmosphere packaging applications. In addition, the presence of chitosan nanoparticles and clove oil was found to provide the microbial barrier properties to the PCS, PCO, and PCSCO films. The PCSCO film was further demonstrated to have superior antifungal activity against the selected Pythium aphanidermatum. The results of the study indicate the potential application of developed nanocomposite film as a promising antifungal packaging material.

Active/smart carboxymethyl cellulose‐polyvinyl alcohol composite films containing rose petal extract for fish packaging

In this study, a film was developed for packaging fish that not only enhanced its shelf life but also was visually receptive to its spoilage. Rose petal extract (RPE) having excellent bioactivity was used as the functional component in carboxymethyl cellulose‐poly vinyl alcohol packaging film. Due to its high anthocyanin content, RPE could be used as a pH indicator, as its colour changed from bright red (pH 2) to yellow (pH 10). The developed film was used for packing Indian Mackerel and assessing its quality during chilled storage. Mackerel packed in neat film spoiled in 3 days while that in RPE containing films had shelf life of 12 days. Total bacterial count, pH, total volatile basic nitrogen and thiobarbituric acid reactive substance of fish in control were higher as compared to in RPE films. On spoilage RPE containing films showed visible colour response from red to green.

Chitosan-based films with antioxidant of bamboo leaves and ZnO nanoparticles for application in active food packaging

The function of chitosan film was reinforced by ZnO nanoparticles and antioxidant of bamboo leaves (AOB) for food packaging application. The results of structural characterization indicated the good compatibility among chitosan, ZnO nanoparticles and AOB. The chitosan film had the best mechanical strength and the highest light transmittance. The addition of AOB remarkably reduced the UV light transmittance and significantly enhanced the antioxidant activity of the films. Meanwhile, AOB and ZnO nanoparticles synergistically enhanced the antibacterial activity against E. coli and S. aureus. Our results suggested that the chitosan/ZnO/AOB films could be applied as potential active packaging materials in food industry to extend the shelf-life of packaged food.

Chitosan Treatment of E-11 Cells Modulates Transcription of Nonspecific Immune Genes and Reduces Nodavirus Capsid Protein Gene Expression

This study explores whether crustacean products inhibit viral infections in aquaculture. Chitosan (CHT) was extracted from waste products of Parapenaeus longirostris. Biochemical composition, viscosity measurement, molecular weight, structure and cytotoxicity tests were used to characterize the extracted chitosan. Cultures of E-11 cells derived from snakehead Ophicephalus striatus were inoculated with 106.74 TCID50 of an isolate of betanodavirus genotype RGNNV (redspotted grouper nervous necrosis virus) after being treated with solutions of 0.3% CHT for 1 h at room temperature. The antiviral effect of CHT was assessed by comparing the ability of RGNVV to replicate and produce cytopathic effects on CHT-treated cell cultures. The change in RNA expression levels of the nodavirus capsid protein gene and three mediator genes in infected cells with or without CHT treatment was evaluated by qPCR. Changes in gene expression compared to control groups were monitored at 6, 24, 48 and 71 h post treatment in all target gene transcripts. The CCR3 expression in CHT treated cells showed a significant increase (p < 0.05) until day 3. On the other hand, the expression of TNF-α decreased significantly (p < 0.05) in CHT treated cells throughout the experimental period. Likewise, the expression of the IL-10 gene showed a significant downregulation in CHT treated cells at all time points (p ≤ 0.05). As further evidence of an antiviral effect, CHT treatment of cells produced a reduction in virus load as measured by a reduced expression of the viral capsid gene and the increase in RQ values from 406 ± 1.9 at hour 1 to 695 ± 3.27 at 72 h post inoculation. Statistical analysis showed that the expression of the viral capsid gene was significantly lower in cells treated with chitosan (p ≤ 0.05). These results improve our knowledge about the antiviral activity of this bioactive molecule and highlight its potential use in fish feed industry.

Assessment of Toxicity and Biodegradability of Poly(vinyl alcohol)-Based Materials in Marine Water

Due to the continuous rise in conventional plastic production and the deficient management of plastic waste, industry is developing alternative plastic products made of biodegradable or biobased polymers. The challenge nowadays is to create a new product that combines the advantages of conventional plastics with environmentally friendly properties. This study focuses on the assessment of the potential impact that polyvinyl alcohol (PVA)-based polymers may have once they are released into the marine environment, in terms of biodegradation in seawater (assessed by the percentage of the Theoretical Oxygen Demand, or % ThOD, of each compound) and aquatic toxicity, according to the standard toxicity test using Paracentrotus lividus larvae. We have tested three different materials: two glycerol-containing PVA based ones, and another made from pure PVA. Biodegradation of PVA under marine conditions without an acclimated inoculum seems to be negligible, and it slightly improves when the polymer is combined with glycerol, with a 5.3 and 8.4% ThOD achieved after a period of 28 days. Toxicity of pure PVA was also negligible (<1 toxic units, TU), but slightly increases when the material included glycerol (2.2 and 2.3 TU). These results may contribute to a better assessment of the behavior of PVA-based polymers in marine environments. Given the low biodegradation rates obtained for the tested compounds, PVA polymers still require further study in order to develop materials that are truly degradable in real marine scenarios.

Multilayer Films Based on Poly(lactic acid)/Gelatin Supplemented with Cellulose Nanocrystals and Antioxidant Extract from Almond Shell By-Product and Its Application on Hass Avocado Preservation

In this work, poly(lactic acid) (PLA)/gelatin/PLA multilayer films supplemented with cellulose nanocrystals and antioxidant extract from almond shell (AS) by-products were developed by solvent casting technique for active food packaging. The almond shell antioxidant extract (ASE) was obtained by microwave-assisted extraction, while cellulose nanocrystals (CNCs) were extracted from AS by a sequential process of alkalization, acetylation and acid hydrolysis. Four formulations were obtained by adding 0 (control), 6 wt.% of ASE (FG/ASE), 4.5 wt.% of CNCs (FG/CNC) and 6 wt.% + 4.5 wt.% of ASE + CNCs, respectively, (FG/ASE + CNC) into fish gelatin (FG). PLA/FG/PLA multilayer films were prepared by stacking two outer PLA layers into a middle FG film. A surface modification of PLA by air atmospheric plasma treatment was optimized before multilayer development to improve PLA adhesion. Complete characterization of the multilayers underlined the FG/ASE + CNC formulation as a promising active reinforced packaging system for food preservation, with low values of transparency, lightness and whiteness index. A good adhesion and homogeneity of the multilayer system was obtained by SEM, and they also demonstrated low oxygen permeability (40.87 ± 5.20 cm³ mm m^-2 day) and solubility (39.19 ± 0.16%) values, while mechanical properties were comparable with commercial plastic films. The developed multilayer films were applied to Hass avocado preservation. The initial degradation temperature (T_ini), DSC parameters and in vitro antioxidant capacity of the films were in accordance with the low peroxide and anisidine values obtained from avocado pulp after packaging for 14 days at 4 °C. The developed PLA/FG/PLA films supplemented with 6 wt.% ASE+ 4.5 wt.% CNCs may be potential bioactive packaging systems for fat food preservation.

Recent Advances in Biotechnological Itaconic Acid Production, and Application for a Sustainable Approach

Intense research has been conducted to produce environmentally friendly biopolymers obtained from renewable feedstock to substitute fossil-based materials. This is an essential aspect for implementing the circular bioeconomy strategy, expressly declared by the European Commission in 2018 in terms of "repair, reuse, and recycling". Competent carbon-neutral alternatives are renewable biomass waste for chemical element production, with proficient recyclability properties. Itaconic acid (IA) is a valuable platform chemical integrated into the first 12 building block compounds the achievement of which is feasible from renewable biomass or bio-wastes (agricultural, food by-products, or municipal organic waste) in conformity with the US Department of Energy. IA is primarily obtained through fermentation with Aspergillus terreus, but nowadays several microorganisms are genetically engineered to produce this organic acid in high quantities and on different substrates. Given its trifunctional structure, IA allows the synthesis of various novel biopolymers, such as drug carriers, intelligent food packaging, antimicrobial biopolymers, hydrogels in water treatment and analysis, and superabsorbent polymers binding agents. In addition, IA shows antimicrobial, anti-inflammatory, and antitumor activity. Moreover, this biopolymer retains qualities like environmental effectiveness, biocompatibility, and sustainability. This manuscript aims to address the production of IA from renewable sources to create a sustainable circular economy in the future. Moreover, being an essential monomer in polymer synthesis it possesses a continuous provocation in the biopolymer chemistry domain and technologies, as defined in the present review.

A comprehensive review on impact of non-thermal processing on the structural changes of food components

Non-thermal food processing is a viable alternative to traditional thermal processing to meet customer needs for high-quality, convenient and minimally processed foods. They are designed to eliminate elevated temperatures during processing and avoid the adverse effects of heat on food products. Numerous thermal and novel non-thermal technologies influence food structure at the micro and macroscopic levels. They affect several properties such as rheology, flavour, process stability, texture, and appearance at microscopic and macroscopic levels. This review presents existing knowledge and advances on the impact of non-thermal technologies, for instance, cold plasma treatment, irradiation, high-pressure processing, ultrasonication, pulsed light technology, high voltage electric field and pulsed electric field treatment on the structural changes of food components. An extensive review of the literature indicates that different non-thermal processing technologies can affect the food components, which significantly affects the structure of food. Applications of novel non-thermal technologies have shown considerable impact on food structure by altering protein structures via free radicals or larger or smaller molecules. Lipid oxidation is another process responsible for undesirable effects in food when treated with non-thermal techniques. Non-thermal technologies may also affect starch properties, reduce molecular weight, and change the starch granule's surface. Such modification of food structure could create novel food textures, enhance sensory properties, improve digestibility, improve water-binding ability and improve mediation of gelation processes. However, it is challenging to determine these technologies' influence on food components due to differences in their primary operation and equipment design mechanisms and different operating conditions. Hence, to get the most value from non-thermal technologies, more in-depth research about their effect on various food components is required.

Incorporation of Natural Blueberry, Red Grapes and Parsley Extract By-Products into the Production of Chitosan Edible Films

The aim of the research was to produce edible packaging based on chitosan with the addition of various concentrations of extracts of blueberry, red grape and parsley marcs. Packaging was made from extrudate extracts, which were subsequently analyzed by physicochemical methods: zeta-potential, gas barrier properties, thickness, water content, solubility, swelling degree, textural properties, total polyphenol content (TPC), polyphenols by high pressure liquid chromatography (HPLC), antioxidant activity, attenuated total reflectance Fourier-Transform spectroscopy (FTIR), antimicrobial activity and determination of migration of bioactive substances. The results indicate that a higher content of plant extracts have a statistically significant (p < 0.05) influence on properties of experimentally produced edible films. Edible films produced with the highest concentrations of red grapes marc extracts showed the most advantageous properties since antimicrobial activity against E. coli were the highest in this kind of produced film. The physical properties of edible films were also improved by the addition of extracts; gas permeability toward oxygen can be defined as advantageous, as can swelling degree, which decreased with higher concentrations of extracts. The research emphasized the possibility to use plant foodstuffs by-products in the production of edible/biodegradable films, helping in the overall sustainability and eco-friendliness of food/package production.

Effects of Peppermint Extract and Chitosan-Based Edible Coating on Storage Quality of Common Carp (Cyprinus carpio) Fillets

Edible coatings have recently been developed and applied to different food matrices, due to their numerous benefits, such as increasing the shelf life of foods, improving their appearance, being vehicles of different compounds, such as extracts or oils of various spices that have antioxidant and antimicrobial activity, as well as being friendly to the environment. The objective of this research was to develop a new edible coating based on chitosan enriched with peppermint extract and to evaluate its effectiveness to inhibit microbial development in vitro and improve both the quality and shelf life of common carp (Cyprinus carpio) during refrigerated storage (4 ± 1 °C). Three treatments were used: edible coating (C + EC), edible coating +, 5% chitosan (C + ECCh) and edible coating + 1.5% chitosan + 10% peppermint (C + ECChP). Prior the coating carp fillets; the antibacterial activity and antioxidant capacity were evaluated in the peppermint extract and coating solutions. After coating and during storage, the following were determined on the fillet samples: microbiological properties, observed for ECP, an inhibition halo of 14.3 mm for Staphylococcus aureus, not being the case for Gram-negative species, for ECCh, inhibition halos of 17.6 mm, 17.1 mm and 16.5 mm for S. aureus, Salmonella typhimurium and Escherichia coli, respectively; for the ECChP, inhibition halos for S. aureus, S. typhimurium and E. coli of 20 mm, 17 mm and 16.8 mm, respectively. For the physicochemical characteristics: an increase in solubility was observed for all treatments during storage, reaching 46.7 mg SN protein/mg total protein for the control, and values below 29.1 mg SN protein/mg total protein (p < 0.05), for fillets with EC (C + EC > C + ECCh > C + ECChP, respectively at the end of storage. For the pH, maximum values were obtained for the control of 6.4, while for the fillets with EC a maximum of 5.8. For TVB-N, the fillets with different CE treatments obtained values (p < 0.05) of 33.3; 27.2; 25.3 and 23.3 mg N/100 g (control > C + E C > C + ECCh > C + ECChP respectively). Total phenolic compounds in the aqueous peppermint extract were 505.55 mg GAE/100 g dried leaves, with 98.78% antioxidant capacity in the aqueous extract and 81.88% in the EC. Biomolecule oxidation (hydroperoxide content) had a significant increase (p < 0.05) in all treatments during storage, 1.7 mM CHP/mg protein in the control, to 1.4 in C + EC, 1.27 in C + ECCh and 1.16 in C + ECChP; TBARS assay values increased in the different treatments during refrigerated storage, with final values of 33.44, 31.88, 29.40 and 29.21 mM MDA/mg protein in the control; C + EC; C + ECCh and C + ECChP respectively. In SDS -PAGE a protective effect was observed in the myofibrillar proteins of fillets with ECChP). The results indicate that the C + ECCh and C + ECChP treatments extend the shelf life of 3–5 days with respect to microbiological properties and 4–5 days with respect to physicochemical characteristics. A reduction in lipid and protein oxidation products was also observed during refrigerated storage. With these findings, this is considered a promising method to increase the shelf life of fish fillets combined with refrigeration and we are able to recommend this technology for the fish processing industry.

Traditional Knowledge of Medicinal Plants Used in the Northeastern Part of Morocco

The knowledge of the plants that are used may provide insight on their properties for further exploration. This study aimed to identify and collect data about medicinal plants used in traditional medicine by the population of the provincial region of Taza, Morocco. An ethnobotanical survey was carried out among 200 informants, competent villagers, herbalists, and traditional healers from the provincial region of Taza city through direct interviews using a structured questionnaire. The survey reported 55 plant species belonging to 28 families used in the folk medicine. Informants' results showed that the most frequently used plants were Origanum compactum, Mentha pulegium, Rosmarinus officinalis L., Aloysia citrodora, Calamintha officinalis Moench, and Artemisia herba-alba Asso., with a relative frequency of citation of 76%, 72%, 60%, 42%, 40%, and 30%, respectively. Moreover, in this study, the Lamiaceae family was the most commonly reported plant family, and the leaves were the most frequently used parts of the plants; otherwise, decoction and infusion were the most used modes in the preparation of remedies from medicinal plants in the traditional medicine. The sociodemographic characteristics showed that women use medicinal plants slightly more than men, the illiterate people use the medicinal plant the most, and old people have more information about the medicinal plants than the new generations. The region of Taza of Morocco has an important floristic biodiversity of medicinal plants which are used in traditional medicine practice. This result provides a good database for pharmacological screening in the search for new plants that can contain new bioactive molecules that can be used as a bioactive ingredient of medicament or as a biological alternative in pharmacology.

Edible coatings and films with incorporation of prebiotics -A review

Prebiotics are compounds naturally present in some foods or can be synthesized by microorganisms and enzymes. Among the benefits associated with prebiotic consumption are the modulation of the intestinal microbiota that increase the production of short chain fatty acids and prevent the development of some disorders such as colon cancer, irritable bowel syndrome, diabetes, obesity, among others. Traditionally, prebiotics have been used in diverse food formulations to enhance their healthy potential or to improve their technological and sensory properties. However, different alternatives for the production of prebiotic products are being explored, such as edible coatings and films. Therefore, this review aims to highlight recent research on edible coatings and films incorporated with different prebiotics, the concept of prebiotics, the general characteristics of these materials, and the main production methods, as well as presenting the perspectives of uses in the food industry. Current works describe that polyols and oligosaccharides are the most employed prebiotics, and depending on their structure and concentration, they can also act as film plasticizer or reinforcement agent. The use of prebiotic in the coating can also improve probiotic bacteria survival making it possible to obtain fruits and vegetables with synbiotic properties. The most common method of production is casting, suggesting that other technologies such as extrusion can be explored aiming industrial scale. The use of film and coating carried of prebiotic is an emerging technology and there are still several possibilities for study to enable its use in the food industry. This review will be useful to detect the current situation, identify problems, verify new features, future trends and support new investigations and investments.

Pullulan or chitosan based active coating by incorporating polyphenols from lemon peel in raw poultry meat

Dip coating with pullulan and chitosan in combination with lemon peel polyphenols (LPP) was attempted for shelf life extension of raw poultry meat. Control samples demonstrated bacterial lag phase and shelf life of 1.3 and 1 day, respectively at 4 °C. Meat samples coated with pullulan or chitosan in combination with 1% LPP led to an increased bacterial lag phase; thereby extending the shelf life of meat by 6 and 14 days, respectively. Significant (p < 0.05) reduction in lipid peroxidation in comparison with control was also observed due to dip treatment. Treated samples maintained values of < 1 mg kg^-1 malondialdehyde for thiobarbituric acid reactive substances during the entire storage period. No significant (p > 0.05) change in colour, weight loss and pH of treated samples during storage was noted. Dip coated samples maintained acceptable sensory quality during the entire storage period. This study indicates that use of LPP for shelf life extension of raw meat could be a practical proposition.

Biodegradable carboxymethyl cellulose-polyvinyl alcohol composite incorporated with Glycyrrhiza Glabra L. essential oil: Physicochemical and antibacterial features

Glycyrrhiza glabra L. root essential oil (GGEO) has well-known antimicrobial and therapeutic features. In this study, a new antimicrobial carboxymethyl cellulose-polyvinyl alcohol (CMC-PVA) binary film was developed using GGEO as an active compound. The effects of various concentrations of GGEO (0.25%, 0.50%, and 0.75%) were scrutinized on the physicochemical and antibacterial properties of composites. It was discovered that GGEO significantly reduced the composite ultimate tensile strength from 17.01 to 3.86 MPa. Further, by increasing the concentration of GGEO to 0.75%, the water vapor permeability and moisture content increased to 13.61 × 10-9 g/m s-1 Pa-1 and 41.06%, respectively. The results indicated that the active films possessed good inhibitory effects against the gram-positive bacteria (L. monocytogenes and Staphylococcus aureus) and were less powerful against gram-negative bacteria (Escherichia coli and S. typhimurium). Finally, the results highlighted that GGEO can act as an excellent antimicrobial agent in combination with CMC-PVA composite.

Pomegranate peels waste hydrolyzate optimization by Response Surface Methodology for Bioethanol production

Unwanted agricultural waste is largely comprised of lignocellulosic substrate which could be transformed into sugars. The production of bioethanol from garbage manifested an agreeable proposal towards waste management as well as energy causation. The goal of this work is to optimize parameters for generation of bioethanol through fermentation by different yeast strains while Saccharomyces cerevisiae used as standard strain. The low cost fermentable sugars from pomegranate peels waste (PPW) were obtained by hydrolysis with HNO3 (1 to 5%). The optimum levels of hydrolysis time and temperature were elucidated via RSM (CCD) ranging from 30 to 60 min and 50 to 100 °C respectively. The result shows that optimum values (g/L) for reducing sugars was 61.45 ± 0.01 while for total carbohydrates was 236 ± 0.01. These values were found when PPW was hydrolyzed with 3% HNO3, at 75 °C for one hour. The hydrolyzates obtained from the dilute HNO3 pretreated PPW yielded a maximum of 0.43 ± 0.04, 0.41 ± 0.03 g ethanol per g of reducing sugars by both Metchnikowia sp. Y31 and M. cibodasensis Y34 at day 7 of ethanologenic experiment. The current study exhibited that by fermentation of dilute HNO3 hydrolyzates of PPW could develop copious amount of ethanol by optimized conditions.