A Stable Metal-Organic Framework Featuring a Local Buffer Environment for Carbon Dioxide Fixation

A highly stable Zn9-pyrazolate metal–organic framework with metallosalen ligands as a carbon dioxide cycloaddition catalyst

A three-dimensional (3D) metal–organic framework constructed from unprecedented Zn9O2(OH)2(pyz)12 (pyz = pyrazolate) clusters and Ni(salen)-derived linkers was reported.

Intrinsic-Unsaturation-Enriched Biporous and Chemorobust Cu(II) Framework for Efficient Catalytic CO2 Fixation and Pore-Fitting Actuated Size-Exclusive Hantzsch Condensation with Mechanistic Validation

Carbon dioxide (CO₂) utilization and one-pot Hantzsch condensation denote two important protocols pertinent to sustainable agenda because of the obvious advantages like reduction in chemical usage, short reaction time, and minimum waste generation. To this end, the astute combination of optimum-sized pore structure with built-in Lewis acid center in metal-organic frameworks (MOFs) can bring about such reactions under energetically favorable conditions and offer a step forward to size-exclusive catalysis. The chemoresistant and twofold interpenetrated Cu(II) framework CSMCRI-13 (CSMCRI = Central Salt & Marine Chemicals Research Institute) is built from a C₃-symmetric tricarboxylate ligand and an N,N'-donor linker that undergo incisive amalgamation of the paddle-wheel [Cu₂(COO)₄] secondary building unit (SBU) and the intrinsically unsaturated Cu(II) node with four coordination. The microporous structure features a dual-pore containing cage-like network with free oxygen-atom-enriched cavities and exhibits appreciable CO₂ adsorption with moderate MOF-CO₂ interaction in activated form (13a). Benefitting from both, the coordinatively frustrated metal center containing MOF acts as a highly synergistic and solvent-free catalyst in CO₂ cycloaddition reaction under an 8 bar CO₂ pressure at 70 °C in 6 h. The catalyst furnished admirable reactivity and fair recyclability with a wide range of substrates, wherein sterically encumbered and long-chain epoxides produced poor conversion. This MOF further executes highly regenerable Hantzsch condensation reaction under mild condition with superior activity to contemporary materials, where most of the 1,4-dihydropyridine derivatives are additionally characterized through the single-crystal X-ray diffraction analysis. Importantly, mechanistic proof of the tricomponent condensation involving built-in Lewis acid sites is validated from several control experiments and in-depth analytical studies. To the best of the single-step multicomponent reaction, substrate molecules having incompatible molecular dimension to that of pore size of the framework resulted insignificant conversion and demonstrated the first-ever pore-fitting-induced size selectivity in Hantzsch condensation.

Current and future perspectives on catalytic-based integrated carbon capture and utilization

There exist several well-known methods with varying maturity for capturing carbon dioxide from emission sources of different concentrations, including absorption, adsorption, cryogenics and membrane separation, among others. The capture and separation steps can produce almost pure CO₂, but at substantial cost for being conditioned for transport and final utilization, with high economical risks to be considered. A possible way for the elimination of this conditioning and cost is direct CO₂ utilization, whether on-site in a further process but within the same plant, or in-situ, coupling both capture and conversion in the same unit. This approach is usually called integrated carbon capture and utilization (ICCU) or integrated carbon capture and conversion (ICCC), and has lately started receiving considerable attention in many circles. As CO₂ is already industrially employed in other sectors, such as food preservation, water treatment and conversion to high added-value chemicals and fuels such as methanol, methane, etc., among others, it is of great interest to explore the global ICCC approach. Catalytic-based processes play a key role in CO₂ conversion, and different technologies are gaining great attention from both academia and industry. However, the 'big picture of ICCU' and in which technology the efforts should focus on at large scale is still unclear. This review analyzes some promising concepts of ICCU specifically on CO₂ catalytic conversion, highlighting their current commercial relevance as well as challenges that have to be faced today and in the next future.

Ultrastable High-Connected Chromium Metal-Organic Frameworks

State-of-the-art MOFs are generally known for chemical stability at one end of the pH scale (i.e., pH < 0 or pH > 14). Herein, we report new Cr-MOFs capable of withstanding extreme pH conditions across approximately 16 pH units from pH < 0 to pH > 14, likely the largest observed pH range for MOFs. The integration of multiple stability-enhancing factors including nonlabile Cr³⁺, mixed Cr-N and Cr-O cross-links, and the highest possible connectivity by Cr₃O trimers enables extraordinary chemical stability confirmed by both PXRD and gas adsorption. Notably, the base stability is much higher than literature Cr-MOFs, thereby revitalizing Cr-MOF's viability in the pursuit for the most chemically stable MOFs. Among known cationic MOFs, the chemical stability of these new Cr-MOFs is unmatchable, to our knowledge. These Cr-MOFs can be developed into multiseries of isoreticular MOFs with a rich potential for functionalization, pore size, and pore geometry engineering and applications.

Synthesis, Structures, and Sorption Properties of Two New Metal-Organic Frameworks Constructed by the Polycarboxylate Ligand Derived from Cyclotriphosphazene

Solvothermal reactions of hexakis(4-carboxyphenoxy)cyclotriphospazene (H₆L1) with copper ions in DMF/H₂O produced one complex, {[Cu₆(L1)₂(OH)(H₂O)₃]·guest} _n (1), but with copper ions and auxiliary rigid 4,4-bipyridine (bpy) produced another new complex, namely, {[Cu₃(L1)(bpy)(H₂O)₆]·guest} _n (2). These complexes had been characterized by IR spectroscopy, elemental analysis, and X-ray structural determination. 1 exhibits a 3D anionic structure with the binodal 4,8-connected network with Schläfli symbol {4⁶}₂{4⁹·6¹⁸·8}, consisting of Cu₆ clusters and L1 ligands. In contrast, complex 2 possesses a different 3D network with trinodal 3,4,6-c topology with Schläfli symbol {4·6²}₂{4²·6⁶·8⁵·10²}{6⁴·8·10}. In these two complexes, the semirigid hexacarboxylate ligands adopt distinct conformations to connect metal ions/clusters, which must be ascribed to the addition of the auxiliary rigid ligand in reaction systems. In addition, gas absorption properties of 1 and 2 including CO₂ and N₂ were further investigated.

Rational Construction of a Responsive Azo-Functionalized Porous Organic Framework for CO2 Sorption

An azo-functionalized porous organic framework (denoted as JJU-1) was synthesized via FeCl3-promoted oxidative coupling polymerization. By virtue of a porous skeleton and a light/heat responsive azo functional group, this task-specific JJU-1 displays a reversible stimuli-responsive adsorption property triggered by UV irradiation and heat treatment. The initial Brunauer-Emmet-Teller (BET) surface area of this porous material is 467 m2 g-1. The CO2 sorption isotherms exhibit a slight decrease after UV irradiation because of the trans to cis conversion of the azo functional skeleton. It is worth mentioning that the responsive CO2 adsorption performance can be recycled for three cycles via alternating external stimuli, confirming the excellently reversible switchability of trans-to-cis isomerization and controllable CO2 adsorption.

Reversible Structural Transformation of CuI-TbIII Heterometallic MOFs with Highly Efficient Detection Capability toward Penicillin

A Cu^I-Tb^III heterometallic MOF, namely 1·DMF, was obtained via a coordination assembly process of isonicotinic acid with Cu^I and Tb^III. 1·DMF can be switched to 1·MeOH in methanol with a luminescent emission response. Meanwhile, 1·MeOH exhibits a reversible single-crystal transformation to 1·DMF after immersion in DMF. Both MOFs have superior physicochemical stability. The 1·DMF-based biosensor has a remarkable sensing performance toward penicillin.

Double-Layer Nitrogen-Rich Two-Dimensional Anionic Uranyl-Organic Framework for Cation Dye Capture and Catalytic Fixation of Carbon Dioxide

A novel two-dimensional double-layer anionic uranyl-organic framework, U-TBPCA {[NH₂(CH₃)₂][(UO₂)(TBPCA)], where H₃TBPCA = 4,4',4″-s-triazine-1,3,5-triyltripamino-methylene-cyclohexane-carboxylate}, with abundant active sites and stability was obtained by assembling UO₂(NO₃)₂·6H₂O and a triazine tricarboxylate linker, TBPCA^3-. Due to the flexibility of the ligand and diverse coordination modes between carboxyl groups and uranyl ions, U-TBPCA exhibits an intriguing topological structure and steric configuration. This double-layer anionic uranyl-organic framework is highly porous and can be used for selective adsorption of cationic dyes. Due to the presence of high-density metal ions and basic -NH- groups, U-TBPCA acts as an effective heterogeneous catalyst for the cycloaddition reaction of carbon dioxide with epoxy compounds. Moreover, the various modes of coordination between the tricarboxylic ligand and uranyl ion were studied by density functional theory calculations, and several simplified models were established to probe the influence of hydrogen bonding between carbon dioxide and U-TBPCA on the ability of U-TBPCA to bind carbon dioxide. This work should aid in improving our understanding of the coordination behavior of uranyl ion as well as the development and utilization of new actinide materials.

Peptide-Based Biosensor with a Luminescent Copper-Based Metal-Organic Framework as an Electrochemiluminescence Emitter for Trypsin Assay

A copper-based metal-organic framework (JUC-1000) has emerged as a promising electrochemiluminescence (ECL) emitter in the domains of bioanalysis and immunoassay. Herein, a highly efficient signal "on-off" peptide-based biosensor was constructed for trypsin (TPN) assay. JUC-1000 synthesized using an organic ligand of H₄BDPO was functionalized as the ECL emitter, whose cathodic ECL behavior in aqueous media was first investigated using potassium persulfate (K₂S₂O₈) as the coreactant. To further amplify the ECL signal, highly catalytic Ag@CeO₂ nanoparticles were fabricated as both a substrate and an coreaction accelerator, which can efficiently catalyze the reduction of S₂O₈^2- to generate more sulfate anion radicals (SO₄^•-) for ECL enhancement, thereby generating strong and stable ECL signals in a "signal on" state. The functionalized JUC-1000 emitter was connected to the Ag@CeO₂ sensing layer though a heptapeptide (HWRGWVC, HGC), and TPN as the target can specifically cleave the carboxyl side of arginine residues in HGC, leading to the release of emitters in a "signal off" state. Based on the efficient signal-switching, the biosensor exhibited linear ECL responses to the added TPN concentration, realizing sensitive detection of TPN in 10 fg/mL to 100 ng/mL with a limit of detection of 3.46 fg/mL. This work proposed an attractive orientation for the fundamental research of applying transition metal-organic frameworks as ECL emitters in bioanalysis and immunoassay.

A Highly-Efficient Oxygen Evolution Electrocatalyst Derived from a Metal-Organic Framework and Ketjenblack Carbon Material

The composite of the metal-organic framework (MOF) Ni(Fe)-MOF-74 and the highly conductive carbon material ketjenblack (KB) could be easily obtained from the in-situ MOF synthesis in a one-step solvothermal reaction. The composite material features a remarkable electrochemical oxygen evolution reaction (OER) performance where the overpotential at 10 mA/cm2 and the current density at 1.7 VRHE are recorded as 0.274 VRHE and 650 mA/cm2 , respectively, in 1 mol/L KOH. In particular, the activation of nickel-iron clusters from the MOF under an applied anodic bias steadily boosts the OER performance. Although Ni(Fe)-MOF-74 goes through some structural modification during the electrochemical measurements, the stabilized and optimized composite material shows excellent OER performance. This simple strategy to design highly-efficient electrocatalysts, utilizing readily available precursors and carbon materials, will leverage the use of diverse metal-organic complexes into electrode fabrication with a high energy conversion efficiency.

Advances of the highly efficient and stable visible light active photocatalyst Zr(IV)-phthalate coordination polymer for the degradation of organic contaminants in water

This work presents the restoration of the Zr-phthalate coordination polymer (Zr-Ph CP) via valuable application in photocatalysis. Zr-Ph CP was facilely synthesized using a soft hydrothermal method at 70 °C, and was characterized utilizing FTIR, Raman Spectrosopy, XPS, PXRD, SEM/EDX, BET, and a hyperspectral camera. Assessment of its photocatalytic degradation potential was performed against two different dyes, the cationic methylene blue (MB) and the anionic methyl orange (MO), as frequent models of organic contaminants, under properly selected mild visible illumination (9 W) where the bandgap energy (Eg) was determined to be 2.72 eV. Effects of different initial pH values and different dyes' initial concentrations were covered. Photocatalytic degradation studies showed that Zr-Ph CP effectively degraded both dyes for initial pH 7 within about 40-60 minutes. Degradation rate constants were calculated as 0.17 and 0.13 min-1 for MB and MO, respectively. Generally, both direct and indirect mechanisms share in the degradation, where adsorption has shown an important role. The repeated use of Zr-Ph CP does not significantly affect its photocatalytic performance suggesting high water stability.

Highly Fluorescent Cadmium Based Metal-Organic Frameworks for Rapid Detection of Antibiotic Residues, Fe3+ and Cr2O72- Ions

Here, two novel 3D Cd(II)-MOFs, [Cd₃·L·(BTB)₂·2DMF] and [(Cd₃O₂)·L·BTC] (denoted as CUST-532 and CUST-533, L = 9,10-bis(N-benzimidazolyl)-anthracene, BTB = 1,3,5-tris(4-carboxyphenyl) benzene, BTC = 1,3,5-benzenetricarboxylic acid, CUST = Changchun University of Science and Technology), were synthesized by solvothermal conditions. Both CUST-532 and CUST-533 are 3D (3,8)-c topological nets with the same point symbol of {4³}₂{4⁶·6¹⁸·8⁴}. PXRD and TGA analyses prove that CUST-532 and CUST-533 have good structural stability and thermal stability. On the basis of the high fluorescence characteristics, the results of fluorescence sensing experiments show that CUST-532 and CUST-533 can be used as multifunctional chemical sensors to achieve rapid fluorescence quenching response to antibiotic residues, Fe³⁺ and Cr₂O₇^2- ions at a much lower concentration. Furthermore, the possible mechanisms of fluorescence quenching in the sensing process were systematically studied by PXRD, UV-vis, fluorescence decay lifetime, and density functional theory.

Efficient and Highly Selective CO2 Capture, Separation, and Chemical Conversion under Ambient Conditions by a Polar-Group-Appended Copper(II) Metal-Organic Framework

A polar sulfone-appended copper(II) metal-organic framework (MOF; 1) has been synthesized from the dual-ligand approach comprised of tetrakis(4-pyridyloxymethylene)methane and dibenzothiophene-5,5'-dioxide-3,7-dicarboxylic acid under solvothermal conditions. This has been studied by different techniques that included single-crystal X-ray diffractometry, based on which the presence of Lewis acidic open-metal sites as well as polar sulfone groups aligned on the pore walls is identified. MOF 1 displays a high uptake of CO₂ over N₂ and CH₄ with an excellent selectivity (S = 883) for CO₂/N₂ (15:85) at 298 K under flue gas combustion conditions. Additionally, the presence of Lewis acidic metal centers facilitates an efficient size-selective catalytic performance at ambient conditions for the conversion of CO₂ into industrially valuable cyclic carbonates. The experimental investigations for this functional solvent-free heterogeneous catalyst are also found to be in good correlation with the computational studies provided by configurational bias Monte Carlo simulation for both CO₂ capture and its conversion.

Selective Implantation of Diamines for Cooperative Catalysis in Isoreticular Heterometallic Titanium-Organic Frameworks

We introduce the first example of isoreticular titanium-organic frameworks, MUV-10 and MUV-12, to show how the different affinity of hard Ti(IV) and soft Ca(II) metal sites can be used to direct selective grafting of amines. This enables the combination of Lewis acid titanium centers and available -NH₂ sites in two sizeable pores for cooperative cycloaddition of CO₂ to epoxides at room temperature and atmospheric pressure. The selective grafting of molecules to heterometallic clusters adds up to the pool of methodologies available for controlling the positioning and distribution of chemical functions in precise positions of the framework required for definitive control of pore chemistry.

Vapor-assisted self-conversion of basic carbonates in metal-organic frameworks

Incorporation of nanoparticles has been considered as an efficient method for enhancing the adsorption performance of metal-organic frameworks (MOFs). Alkali metal compounds possess outstanding affinity to acidic CO2. In this study, a robust self-conversion strategy is reported for improving the carbon capture performance of MOFs, through directly transforming partial metal centers to basic carbonate (BC) nanoparticles. Based on the hydrolysis of coordination bonds induced by water impurity in solvents and the decarboxylation of linkers under thermal and alkaline conditions, the self-loading of BC in MOFs can be realized by solvent vapor-assisted thermal treatment. Since water impurity causes limited self-conversion and excess organic solvent can purify MOFs, the BC-MOF materials maintain good crystallinity and even show superior porosity. Owing to the increased specific surface areas, open metal sites, and alkalinity of BC, the prepared MOF composites exhibit substantially improved CO2 capture performance with good balance between capacity and selectivity. For example, after self-conversion with ethanol solvent, the CO2 adsorption capacity and CO2/N2 (15 : 85) selectivity at 298 K and 100 kPa increase from 3.7 mmol g-1 and 11.4 to 5.8 mmol g-1 and 29.2, respectively.

Potassium Ions Induced Framework Interpenetration for Enhancing the Stability of Uranium-Based Porphyrin MOF with Visible-Light-Driven Photocatalytic Activity

The stability of many MOFs is not satisfactory, which severely limits the exploration of their potential applications. Given this, we have proposed a strategy to improve the stability of MOFs by introducing alkali metal K⁺ capable of coordinating with metal nodes, which finally induces the interpenetrating uranyl-porphyrin framework to connect as a whole (IHEP-9). The stability experiments reveal that the IHEP-9 has good thermal stability up to 400 °C and can maintain its crystalline state in the aqueous solution with pH ranging from 2 to 11. The catalytic activity of IHEP-9 as a heterogeneous photocatalyst for CO₂ cycloaddition under the driving of visible light at room temperature is also demonstrated. This induced interpenetration and fixation method may be promising for the fabrication of more functional MOFs with improved structural stability.

The multifunctional design of metal–organic framework by applying linker desymmetrization strategy: synergistic catalysis for high CO2-epoxide conversion

A novel copper-organic framework was synthesized by a linker desymmetrization strategy. Synergistic catalysis with Lewis and Brønsted acid sites promoted a high catalytic efficiency towards the CO2-propylene oxide cycloaddition reaction.

Aminoethylimidazole ionic liquid-grafted MIL-101-NH2 heterogeneous catalyst for the conversion of CO2 and epoxide without solvent and cocatalyst

An aminoethylimidazole IL-functionalized MIL-101-NHIM-NH₂ catalyst efficiently catalyzes the cycloaddition reaction of CO₂ and epoxide without solvent and cocatalyst, owing to the synergistic effects of Cr, –NH₂ and Br⁻ active sites.

Rational Design of a ZnII MOF with Multiple Functional Sites for Highly Efficient Fixation of CO2 under Mild Conditions: Combined Experimental and Theoretical Investigation

The development of efficient heterogeneous catalysts suitable for carbon capture and utilization (CCU) under mild conditions is a promising step towards mitigating the growing concentration of CO₂ in the atmosphere. Herein, we report the construction of a hydrogen-bonded 3D framework, {[Zn(hfipbba)(MA)]⋅3 DMF}_n (hfipbba=4,4'-(hexaflouroisopropylene)bis(benzoic acid)) (HbMOF1) utilizing Zn^II center, a partially fluorinated, long-chain dicarboxylate ligand (hfipbba), and an amine-rich melamine (MA) co-ligand. Interestingly, the framework possesses two types of 1D channels decorated with CO₂ -philic (-NH₂ and -CF₃ ) groups that promote the highly selective CO₂ adsorption by the framework, which was supported by computational simulations. Further, the synergistic involvement of both Lewis acidic and basic sites exposed in the confined 1D channels along with high thermal and chemical stability rendered HbMOF1 a good heterogeneous catalyst for the highly efficient fixation of CO₂ in a reaction with terminal/internal epoxides at mild conditions (RT and 1 bar CO₂ ). Moreover, in-depth theoretical studies were carried out using periodic DFT to obtain the relative energies for each stage involved in the catalytic reaction and an insight mechanistic details of the reaction is presented. Overall, this work represents a rare demonstration of rational design of a porous Zn^II MOF incorporating multiple functional sites suitable for highly efficient fixation of CO₂ with terminal/internal epoxides at mild conditions supported by comprehensive theoretical studies.

Seven new metal-organic frameworks assembled from semi-rigid polycarboxylate and auxiliary N-donor ligands: syntheses, structures and properties

Seven new metal-organic frameworks (MOFs), namely, [Zn₂(L¹)(H₂O)₃]_n (1), [Zn₂(L¹)(dib)(H₂O)₂]_n (2), {[Zn₂(L¹)(4,4'-bipy)(H₂O)₂]·H₂O}_n (3), [Cd₂(L¹)(1,10-phen)]_n (4), [Ni₂(HL¹)(4,4'-bipy)(μ₃-OH)(μ₂-H₂O)]_n (5), {[Co₄(L¹)(4,4'-bibp)₃]·(4,4'-bibp)₃}_n (6), and [Co₂(L²)(4,4'-bibp)₂(H₂O)]_n (7), where H₄L¹ and H₄L² are semi-rigid 3-(3,5-dicarboxylphenoxy)phthalic acid and 4-(3,5-dicarboxylphenoxy)phthalic acid, respectively, and 4,4'-bipy is 4,4'-bipyridine, dib is 1,4-bis(1H-imidazol-1-yl)benzene, 1,10-phen is 1,10-phenanthroline and 4,4'-bipb is 1,4-bis(pyridin-4-yl)benzene, have been prepared under solvothermal conditions with Zn^II, Cd^II, Co^II and Ni^II ions in the presence of auxiliary N-donor ligands. The crystal structures and photoluminescence and magnetic properties of these compounds have been investigated. Compound 1 displays a 3,4,6-connected two-dimensional (2D) topology with a Schläfli symbol of (4².5)₂(4³.5².7)(4⁵.5⁶.6³)₂, and the 2D structure was further assembled to form a three-dimensional (3D) framework by intermolecular O-H...O hydrogen bonds. Compound 2 features a novel 3,3,4-connected structure and the point symbol is (4.10²)(4.6.8⁴)(6².8). Compound 3 exhibits a 3,4,6-connected 3-nodal net having a 3,4,6 T53 type topology, with the point symbol (4.6²)₂(4².6⁴)₂(4².6⁸.8².10³). Compound 4 shows a 2D→3D supramolecular structure formed by π-π stacking interactions. Compound 5 possesses a 3D framework with a tfz-d net topology. Compounds 6 and 7 are constructed from the same auxiliary ligand and metal salt at the same temperature, but with different main ligands and exhibiting different topologies. Compound 6 presents a 3D 4,6-connected topological network with a Schläfli symbol of (3.4⁴.6)(3².4⁴.5⁶.6³), while compound 7 has a 3D topological network with a Schläfli symbol of (4¹².6¹⁶). Magnetic analyses indicate that compounds 5 and 7 show weak antiferromagnetic interactions.

Two cadmium(II) coordination polymers as multi-functional luminescent sensors for the detection of Cr(VI) anions, dichloronitroaniline pesticide, and nitrofuran antibiotic in aqueous media

Two ternary cadmium(II) coordination polymers, with the formulas being {[Cd(tptc)_0.5(bpz)(H₂O)]·0.5H₂O}_n (CP 1), and [Cd(tptc)_0.5(bpy)]_n (CP 2), were designed through mixed ligands strategy. Benefiting from the excellent chemical stability and luminescent property, two Cd(II) CPs possessing efficient multi-functional fluorescent responses toward Cr(VI) anions, 2,6-dichloro-4-nitroaniline pesticide, and nitrofuran antibiotic in aqueous media with high sensitivity, selectivity, and excellent recyclable behaviors with the detection limits (LODs) are 235 ppb for CrO₄^2- anion, 343 ppb for Cr₂O₇^2- anion, 112 ppb for DCN pesticide, 62 ppb for NFT antibiotic for CP 1, and 173 ppb for CrO₄^2- anion, 270 ppb for Cr₂O₇^2- anion, 638 ppb for DCN pesticide, 184 ppb for NFT antibiotic for CP 2, respectively. Besides, the mechanisms of luminescence quenching were revealed from the viewpoint of internal filter effect (IFE) and photoinduced electron transfer (PET).

Water and Metal-Organic Frameworks: From Interaction toward Utilization

The steep stepwise uptake of water vapor and easy release at low relative pressures and moderate temperatures together with high working capacities make metal-organic frameworks (MOFs) attractive, promising materials for energy efficient applications in adsorption devices for humidity control (evaporation and condensation processes) and heat reallocation (heating and cooling) by utilizing water as benign sorptive and low-grade renewable or waste heat. Emerging MOF-based process applications covered are desiccation, heat pumps/chillers, water harvesting, air conditioning, and desalination. Governing parameters of the intrinsic sorption properties and stability under humid conditions and cyclic operation are identified. Transport of mass and heat in MOF structures, at least as important, is still an underexposed topic. Essential engineering elements of operation and implementation are presented. An update on stability of MOFs in water vapor and liquid systems is provided, and a suite of 18 MOFs are identified for selective use in heat pumps and chillers, while several can be used for air conditioning, water harvesting, and desalination. Most applications with MOFs are still in an exploratory state. An outlook is given for further R&D to realize these applications, providing essential kinetic parameters, performing smart engineering in the design of systems, and conceptual process designs to benchmark them against existing technologies. A concerted effort bridging chemistry, materials science, and engineering is required.

Crosslinked Resin-Supported Bifunctional Organocatalyst for Conversion of CO2 into Cyclic Carbonates

The development of solvent-free, metal-free, recyclable organic catalysts is required for the current chemical fixation of carbon dioxide converted into cyclic carbonates. With the goal of reducing the cost, time, and energy consumption for the coupling reaction of CO₂ and epoxides, a series of highly active heterogeneous catalysts, based on a thiourea and quaternary ammonium salt system, are synthesized by using a thiol-ene click reaction under ultraviolet light. Benefitting from synergistic interactions of the electrophilic center (thiourea) and the nucleophilic site (ammonium bromide), the catalysts exhibit excellent catalytic selectivity (99 %) for the cycloaddition of carbon dioxide with a diverse range of epoxides under mild conditions (1.2 MPa, 100 °C). Moreover, the catalyst can be easily recycled by facile filtration and reused for 5 times without noticeable loss of activity and selectivity. This work provides a potential heterogeneous catalyst for the conversion of carbon dioxide into high value-added chemicals with the combined advantages of low cost, easy recovery, and satisfactory catalytic properties.

Unprecedented High Temperature CO2 Selectivity and Effective Chemical Fixation by a Copper-Based Undulated Metal-Organic Framework

Post- and precombustion CO₂ capture and separation are the vital challenges from industrial viewpoint, as the accessible technologies are not cost-effective and cumbersome. Thus, the development of functional metal-organic frameworks (MOFs) that are found to be promising materials for selective CO₂ capture, separation, and conversion is gaining an importance in the scientific world. Based on the strategic design, a new functionalized triazine-based undulated paddle-wheel Cu-MOF (1), {[Cu(MTABA)(H₂O)]·4H₂O·2EtOH·DMF}_n (where, H₂MTABA = 4,4'-((6-methoxy-1,3,5-triazine-2,4-diyl)bis(azanediyl))dibenzoic acid), has been synthesized under solvothermal conditions and fully characterized. MOF 1 contains a one-dimensional channel along the a-axis with pore walls decorated with open metal sites, and multifunctional groups (amine, triazine, and methoxy). Unlike other porous materials, activated 1 (1') possesses exceptional increment in CO₂/N₂ and CO₂/CH₄ selectivity with increased temperature calculated by the ideal adsorbed solution theory. With an increase in temperature from 298 to 313 K, the selectivity of CO₂ rises from 350.3 to 909.5 at zero coverage, which is unprecedented till date. Moreover, 1' behaves as a bifunctional heterogeneous catalyst through Lewis acid (open metal) and Brönsted acid sites to facilitate the chemical fixation of CO₂ to cyclic carbonates under ambient conditions. The high selectivity for CO₂ by 1' even at higher temperature was further corroborated with configurational bias Monte Carlo molecular simulation that ascertains the multiple CO₂-philic sites and epoxide binding sites in 1' to further decipher the mechanistic pathway.

Coordination-driven assembly of a 3d-4f heterometallic organic framework with 1D Cu4I4 and Eu-based chains: syntheses, structures and various properties

A three-dimensional porous 3d-4f heterometallic organic framework, namely, {[Eu3(Cu4I4)3(INA)9(DMF)4]·3DMF}n (YNU-2), was successfully prepared under solvothermal conditions. There are two different one-dimensional metal chains in the structure, namely, Cu4I4 and EuIII-based chains, resulting in an excellent stability of the prepared sample. A N2 sorption isotherm at 77 K revealed that the activated sample exhibits a Brunauer-Emmett-Teller surface area of 371 m2 g-1, while, YNU-2 can adsorb obviously higher CO2 amounts than CH4 at 273 K and 298 K under 1 atm because of the stronger interaction force between CO2 and the porous skeleton. Furthermore, YNU-2 is highly efficient heterogeneous catalyst for chemical fixation of the CO2 and epoxides into cyclic carbonates with a preferable recyclability. Taking into account its excellent stability, the prepared sample can be used to construct an electrochemical adapter sensor for detecting cocaine with a detection limit of 0.27 pg mL-1 in the wide range of 0.001-0.5 ng mL-1.

Progress of MOF-Derived Functional Materials Toward Industrialization in Solar Cells and Metal-Air Batteries

The cutting-edge photovoltaic cells are an indispensable part of the ongoing progress of earth-friendly plans for daily life energy consumption. However, the continuous electrical demand that extends to the nighttime requires a prior deployment of efficient real-time storage systems. In this regard, metal-air batteries have presented themselves as the most suitable candidates for solar energy storage, combining extra lightweight with higher power outputs and promises of longer life cycles. Scientific research over non-precious functional catalysts has always been the milestone and still contributing significantly to exploring new advanced materials and moderating the cost of both complementary technologies. Metal-organic frameworks (MOFs)-derived functional materials have found their way to the application as storage and conversion materials, owing to their structural variety, porous advantages, as well as the tunability and high reactivity. In this review, we provide a detailed overview of the latest progress of MOF-based materials operating in metal-air batteries and photovoltaic cells.