Ring-opening polymerization of lactide with group 3 metal complexes supported by dianionic alkoxy-amino-bisphenolate ligands: combining high activity, productivity, and selectivity

A synthetic polymer system with repeatable chemical recyclability

The development of chemically recyclable polymers offers a solution to the end-of-use issue of polymeric materials and provides a closed-loop approach toward a circular materials economy. However, polymers that can be easily and selectively depolymerized back to monomers typically require low-temperature polymerization methods and also lack physical properties and mechanical strengths required for practical uses. We introduce a polymer system based on γ-butyrolactone (GBL) with a trans-ring fusion at the α and β positions. Such trans-ring fusion renders the commonly considered as nonpolymerizable GBL ring readily polymerizable at room temperature under solvent-free conditions to yield a high-molecular weight polymer. The polymer has enhanced thermostability and can be repeatedly and quantitatively recycled back to its monomer by thermolysis or chemolysis. Mixing of the two enantiomers of the polymer generates a highly crystalline supramolecular stereocomplex.

Chemical synthesis of perfectly isotactic and high melting bacterial poly(3-hydroxybutyrate) from bio-sourced racemic cyclic diolide

Bacterial poly(3-hydroxybutyrate) (P3HB) is a perfectly isotactic, crystalline material possessing properties suitable for substituting petroleum plastics, but high costs and low volumes of its production are impractical for commodity applications. The chemical synthesis of P3HB via ring-opening polymerization (ROP) of racemic β-butyrolactone has attracted intensive efforts since the 1960s, but not yet produced P3HB with high isotacticity and molecular weight. Here, we report a route utilizing racemic cyclic diolide (rac-DL) derived from bio-sourced succinate. With stereoselective racemic catalysts, the ROP of rac-DL under ambient conditions produces rapidly P3HB with perfect isotacticity ([mm] > 99%), high melting temperature (T_m = 171 °C), and high molecular weight (M_n = 1.54 × 10⁵ g mol^-1, Đ = 1.01). With enantiomeric catalysts, kinetic resolution polymerizations of rac-DL automatically stops at 50% conversion and yields enantiopure (R,R)-DL and (S,S)-DL with >99% e.e. and the corresponding poly[(S)-3HB] and poly[(R)-3HB] with high T_m = 175 °C.

Block-Stereoblock Copolymers of Poly(ϵ-Caprolactone) and Poly(Lactic Acid)

A magnesium complex of the type {ONNN}Mg-HMDS wherein {ONNN} is a sequential tetradentate monoanionic ligand is introduced. In the presence of an alcohol initiator this complex catalyzes the living and immortal homopolymerization of the lactide enantiomers and ϵ-caprolactone at room-temperature with exceptionally high activities, as well as the precise block copolymerization of these monomers in a one-pot synthesis by sequential monomer addition. Copolymers of unprecedented microstructures such as the PCL-b-PLLA-b-PDLA and PDLA-b-PLLA-b-PCL-b-PLLA-b-PDLA block-stereoblock microstructures that feature unique thermal properties are readily accessed.

Lanthanum complexes containing a bis(phenolate) ligand with a ferrocene-1,1'-diyldithio backbone: synthesis, characterization, and ring-opening polymerization of rac-lactide

Lanthanum complexes [(L)LaX] (X = N(SiMe3)2, O(i)Pr , BH4) supported by a ferrocene-based (OSSO)-type ligand LH2 were synthesized and characterized by elemental analysis, NMR spectroscopy and cyclic voltammetry. The structure of was confirmed by single crystal X-ray diffraction. These complexes were highly active initiators for the ring-opening polymerization of rac-lactide (rac-LA). The activity depended on the initiating group in the order of ≈ > . The activities of and during polymerization were controlled in situ with external redox reagents by reversibly switching the oxidation state of the iron center.

Rare-earth metal-mediated PhCN insertion into N,N-bis(trimethylsilyl)naphthalene-1,8-diamido dianion – a synthetic approach to complexes coordinated by ansa-bridged amido-amidinato ligand

We report the first example of rare earth metal-mediated insertion of PhCN into Si–N bonds with the formation of an amidinato moiety.

Configurationally flexible zinc complexes as catalysts for rac-lactide polymerisation

Introduction of catalytic site flexibility (fast racemisation) into a previously reported zinc alkoxide catalyst afforded a slight preference for isotactic lactide polymerization via catalytic-site mediated chain-end control.

Steric vs. electronic stereocontrol in syndio- or iso-selective ROP of functional chiral β-lactones mediated by achiral yttrium-bisphenolate complexes

Electronic vs. steric effects of ligand ortho-substituents in (bis)phenolate yttrium-based complexes for preparation of a large scope of stereoregular poly(3-hydroxyalkanoate)s.

Synthesis of amine-bridged bis(phenolate) rare-earth metal aryloxides and their catalytic performances for the ring-opening polymerization of l-lactic acid O-carboxyanhydride and l-lactide

Rare-earth metal aryloxides were found as efficient initiators for the ring-opening polymerization of l-lactic acid O-carboxyanhydride and l-lactide. A comparative study on catalyst activities and reaction kinetics were conducted.

Polymers from sugars: cyclic monomer synthesis, ring-opening polymerisation, material properties and applications

This feature article gives an overview of sugar-based polymers that can be made by ring-opening-polymerisation and their applications.

Ligands and complexes based on piperidine and their exploitation of the ring opening polymerisation of rac-lactide

Ligands based on 2-aminomethyl piperidine have been prepared, complexed to a variety of metals and tested for their ability to polymerise lactide.

Preparation of single-site tin(IV) compounds and their use in the polymerization of ε-caprolactone

Butyltin(IV) carboxylate compounds were obtained by reactions of butyltrichlorotin(IV) with potassium pivalate, perfluoroheptanoate, methacrylate, 2,6-pyridinedicarboxylate, and phthalate. The synthesized complexes were fully characterized by nuclear magnetic resonance (1H-, 13C-NMR), Fourier transform infrared (FTIR), mass spectroscopies (MS) and elemental analysis. These tin complexes were used as catalysts for the ring opening polymerization of ε-caplolactone and the conversion of monomers to polymers was completed in just 1 h. The structures of polymers were characterized by a combination of spectroscopic techniques (NMR, FTIR, MS), differential scanning calorimeter (DSC) and gel permeation chromatography. In this study, the ε-caplolactone polymers with different average molecular weights between 5000 and 40,000 Da having a regular structure were obtained.

Synthesis and characterization of dinuclear rare-earth complexes supported by amine-bridged bis(phenolate) ligands and their catalytic activity for the ring-opening polymerization of l-lactide

Reactions of amine-bridged bis(phenolate) protio-ligands N,N-bis(3,5-di-tert-butyl-2-hydroxybenzyl)aminoacetic acid (L(1)-H3) and N,N-bis[3,5-bis(α,α'-dimethylbenzyl)-2-hydroxybenzyl]aminoacetic acid (L(2)-H3), with 1 equiv. M[N(SiMe3)2]3 (M = La, Nd, Sm, Gd, Y) in THF at room temperature yielded the neutral rare-earth complexes [M2(L)2(THF)4] (L = L(1), M = La (), Nd (), Sm (), Gd (), Y (); L = L(2), M = La (), Nd (), Sm (), Gd (), Y ()). All of these complexes were characterized by single-crystal X-ray diffraction, elemental analysis and in the case of yttrium and lanthanum complexes, (1)H NMR spectroscopy. The molecular structure of revealed dinuclear species in which the eight-coordinate lanthanum centers were bonded to two oxygen atoms of two THF molecules, to three oxygen atoms and one nitrogen atom of one L(1) ligand, and two oxygen atoms of the carboxyl group of another. Complexes were also dinuclear species containing seven-coordinate metal centers similar to , albeit with bonding to one rather than two carboxyl group oxygens of another ligand. Further treatment of with excess benzyl alcohol provided dinuclear complex [La2(L(1))2(BnOH)6] (), in which each lanthanum ion is eight-coordinate, bonded to three oxygen atoms and one nitrogen atom of one ligand, three oxygen atoms of three BnOH molecules, as well as one oxygen atom of bridging carboxyl group of the other ligand. In the presence of BnOH, complexes efficiently catalyzed the ring-opening polymerization of l-lactide in a controlled manner and gave polymers with relatively narrow molecular weight distributions. The kinetic and mechanistic studies associated with the ROP of l-lactide using /BnOH initiating system have been performed.

Group 4 metal complexes of Trost's semi-crown ligand: synthesis, structural characterization and studies on the ring-opening polymerization of lactides and ε-caprolactone

The synthesis of titanium(IV), zirconium(IV) and hafnium(IV) complexes of Trost's semi-crown ligand is described. All complexes were fully characterized by 1H and 13C NMR and mass spectroscopy. The molecular structures of the representative complexes 2, 3 and 4 were determined by single-crystal X-ray diffraction studies. The X-ray diffraction studies reveal that complexes 2, 3 and 4 crystallized in an orthorhombic crystal system. Complexes 2 and 3 have a monomeric structure in the solid state with distorted octahedral geometry around the metal center, whereas complex 4 was found to crystallize in a trimeric structure bridging with an oxygen atom, where the geometry around the titanium is distorted trigonal bipyramidal. The activities and stereoselectivities of these complexes toward the ring-opening polymerization (ROP) of lactides (L-LA and rac-LA) and ε-caprolactone (CL) have been investigated. Complexes 1–4 were found to be efficient single-component initiators for the ring-opening polymerization of cyclic esters and yielded high molecular weight polymers (Mn) with narrow molecular weight distributions (MWD).The microstructure of the resultant polylactides (PLAs) from rac-LA was determined. Complexes 2 and 3 afforded isotactic-enriched PLA (Pm = 0.78–0.71) with narrow MWD (1.07–1.04), on the other hand complexes 1 and 4 produced atactic PLA. Kinetic and post polymerization studies confirm that the polymerization proceeds through the coordination–insertion mechanism.

Bimetallic Schiff base complexes for stereoselective polymerisation of racemic-lactide and copolymerisation of racemic-lactide with ε-caprolactone

Bimetallic Schiff-base complexes with different bridging parts and silyl-substituents were applied for stereoselective ROP ofrac-LA, and copolymerisation ofrac-LA/ε-CL.

Aminopiperidine based complexes for lactide polymerisation

A series of new ligands based on a 2-(aminomethyl)piperidine motif have been prepared. An interesting diversity in structure is observed, all complexes have been trialled for the polymerisation of rac-lactide.

A unique cooperative catalytic system carrying metallic iron and 2-hydroxyethyl 2-bromoisobutyrate for the controlled/living ring-opening polymerization of ε-caprolactone

Iron and 2-hydroxyethyl 2-bromoisobutyrate cooperatively initiates the ε-caprolactone polymerization, yielding polymers with high molecular weight and narrow molecular weight distribution.

Copolymerization of l-lactide and ε-caprolactone catalyzed by mono-and dinuclear salen aluminum complexes bearing bulky 6,6′-dimethylbipheyl-bridge: random and tapered copolymer

Mono- and dinuclear salen aluminum complexes bearing a racemic 6,6′-dimethyl-biphenyl bridge could efficiently catalyze the copolymerization of l-LA and ε-CL in the melt, producing practically random and tapered copolymers, respectively.